ASME X5CrNi17-7 Aceros inoxidables
Actualizaciones de datos
Este material cuenta con 164 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME X5CrNi17-7 Composición química
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes, EN 10088-2, 2014
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ASME X5CrNi17-7 Propiedades físicas
Temperatura
Este material cuenta con 164 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME X5CrNi17-7 Tratamiento Térmico
- Hot forming at 1150 to 850°C, air cooling
Solution annealing (+AT) at 1000 to 1100°C, air or water cooling. Cooling sufficiently rapidly in order to avoid the occurrence of intergranular corrosion.
Solution annealing may be omitted if the conditions for hot working and subsequent cooling are such that the requirements for the mechanical properties of the product and the resistance to intergranular corrosion. If heat treatment is carried out in a continuous furnace, the upper part of the range specified is usually preferred, or even exceeded. Lower end of the range specified for solution annealing should be aimed at the heat treatment as part of further processing, because otherwise the mechanical properties might be affected. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels, a temperature of 1000°C for steels with Mo contents up to 3% and a temperature of 1020°C for steels with Mo contents exceeding 3%. - Hot working (air cooling): 1200-900°C; +AT - Solution annealing (air or water cooling): 1000-1100°C.
ASME X5CrNi17-7 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ASME X5CrNi17-7 Materiales equivalentes internacionales
Mostrando 15 de 48 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 48 equivalentes internacionales?
Consulte los 48 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 48Referencias cruzadas
- 16Composición
- 54Propiedades mecánicas
- 3Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 41Proveedores Totales