ASME X1CrNi25-21 Aceros inoxidables
Actualizaciones de datos
Este material cuenta con 227 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME X1CrNi25-21 Composición química
Flat products made of steels for pressure purposes - Part 7: Stainless steels, EN 10028-7, 2016
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ASME X1CrNi25-21 Propiedades físicas
Temperatura
Este material cuenta con 227 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME X1CrNi25-21 Tratamiento Térmico
- Hot forming at 1150 to 850°C, air cooling
Solution annealing (+AT) at 1030 to 1110°C, air or water cooling. Cooling sufficiently rapidly in order to avoid the occurrence of intergranular corrosion.
Solution annealing may be omitted if the conditions for hot working and subsequent cooling are such that the requirements for the mechanical properties of the product and the resistance to intergranular corrosion. If heat treatment is carried out in a continuous furnace, the upper part of the range specified is usually preferred, or even exceeded. Lower end of the range specified for solution annealing should be aimed at the heat treatment as part of further processing, because otherwise the mechanical properties might be affected. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels, a temperature of 1000°C for steels with Mo contents up to 3% and a temperature of 1020°C for steels with Mo contents exceeding 3%. - Hot forming: 1150 to 850°C, air cooling; Solution annealing (+AT): 1030 to 1110°C, water or air cooling.
ASME X1CrNi25-21 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ASME X1CrNi25-21 Materiales equivalentes internacionales
Mostrando 15 de 64 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 64 equivalentes internacionales?
Consulte los 64 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 64Referencias cruzadas
- 18Composición
- 74Propiedades mecánicas
- 3Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- 19Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 47Proveedores Totales