ASME X2CrNiN18-10 Aceros inoxidables
Actualizaciones de datos
Este material cuenta con 478 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME X2CrNiN18-10 Composición química
Flat products made of steels for pressure purposes - Part 7: Stainless steels, EN 10028-7, 2016
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ASME X2CrNiN18-10 Propiedades físicas
Temperatura
Este material cuenta con 478 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME X2CrNiN18-10 Tratamiento Térmico
- Hot forming at 1150 to 850°C, air cooling
Solution annealing (+AT) at 1000 to 1100°C, air or water cooling. Cooling sufficiently rapidly in order to avoid the occurrence of intergranular corrosion.
Solution annealing may be omitted if the conditions for hot working and subsequent cooling are such that the requirements for the mechanical properties of the product and the resistance to intergranular corrosion. If heat treatment is carried out in a continuous furnace, the upper part of the range specified is usually preferred, or even exceeded. Lower end of the range specified for solution annealing should be aimed at the heat treatment as part of further processing, because otherwise the mechanical properties might be affected. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels, a temperature of 1000°C for steels with Mo contents up to 3% and a temperature of 1020°C for steels with Mo contents exceeding 3%. - Hot forming: 1150 to 850°C, air cooling; Solution annealing (+AT): 1000 to 1100°C, water or air cooling.
ASME X2CrNiN18-10 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ASME X2CrNiN18-10 Materiales equivalentes internacionales
Mostrando 15 de 130 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 130 equivalentes internacionales?
Consulte los 130 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 130Referencias cruzadas
- 24Composición
- 145Propiedades mecánicas
- 53Propiedades físicas
- 3Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- 8Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- 45Bicho raro
- -Uniones
- -Revestimientos
- 19Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 51Proveedores Totales