AS JN/HBW555XCr21 Hierros fundidos
Actualizaciones de datos
Este material cuenta con 308 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
AS JN/HBW555XCr21 Composición química
AS 2027: 2007 / Hierro fundido resistente a abrasivos
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
AS JN/HBW555XCr21 Tratamiento Térmico
- Typical heat treatments are hardening, tempering, soft annealing and annealing. A typical hardening cycle is: slowly heating up to a temperature within the range of 900°C to 1050°C, holding for a determined period of time, then rapidly cooling. A typical tempering cycle involves: slowly heating up to a temperature within the range of 200°C to 550°C, holding for a period of time appropriate to the thickness, followed by air or furnace cooling. Annealing method is: slowly heating up to a temperature within the range of 920°C to 975°C, holding for at least 1 h, then slowly cooling down in the furnace to about 810°C and then further cooling down to 600°C at a rate not exceeding 55 K/h, followed by air or furnace cooling. If castings require annealing then a typical annealing involves slowly heating up to a temperature of 700°C to 750°C for a minimum of 4 h, and then slowly cooling in the furnace to 600°C, following by air or furnace cooling.
AS JN/HBW555XCr21 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
AS JN/HBW555XCr21 Materiales equivalentes internacionales
Mostrando 15 de 213 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 213 equivalentes internacionales?
Consulte los 213 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 213Referencias cruzadas
- 9Composición
- 1Propiedades mecánicas
- -Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 84Proveedores Totales