PROPRIETARY VMO Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 202 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VMO Composición química
Aços Inajá Ltda, Product Data Sheet,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VMO Propiedades físicas
Temperatura
Este material cuenta con 202 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VMO Tratamiento Térmico
- Stress relief: Must be performed after machining and before hardening. The relief procedure should involve slow heating to temperatures between 500 and 600°C and oven cooling to a temperature of 200°C. If applied after work, stress relief must be carried out at a temperature 50°C lower than the temperature of the last temper.
Quenching: Heating for quenching should be between 890 and 910°C.It is recommended to pre-warm the tools. Cool in suitable oil with stirring and heated to 40 to 70°C.
Tempering: The tools must be tempered immediately after tempering, as soon as they reach 60°C. Make at least 2 tempers and between each temper the parts must cool slowly to room temperature. Tempering temperatures should be chosen depending on the desired hardness. The time of each tempering must be at least 2 hours. For pieces larger than 70 mm, the time must be calculated as a function of their dimension. Allow 1 hour for each inch of thickness.
PROPRIETARY VMO Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VMO Materiales equivalentes internacionales
Mostrando 15 de 95 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 95 equivalentes internacionales?
Consulte los 95 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 95Referencias cruzadas
- 15Composición
- 1Propiedades mecánicas
- 16Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 73Proveedores Totales