PROPRIETARY VC-131 Aceros inoxidables
Actualizaciones de datos
Este material cuenta con 129 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VC-131 Composición química
Aços Inajá Ltda, Product Data Sheet,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VC-131 Propiedades físicas
Temperatura
Este material cuenta con 129 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VC-131 Tratamiento Térmico
- Stress relief: Must be performed after machining and before hardening. The reliefing procedure should involve slow heating to temperatures between 500 and 600°C and oven cooling to a temperature of 200°C. If applied after work, stress relief must be carried out at a temperature 50°C lower than the temperature of the last temper.
Quenching: The heat for quenching should be between 950 and 970°C. It is recommended to pre-warm the tools.
Cool in:
- Appropriate oil, with agitation and heated between 40 and 70°C.
- Molten salt bath, kept between 500 and 550°C.
- Calm air.
It can be tempered in a vacuum oven as long as high cooling pressures (above 5 bar) are used. In this case, the quenching penetration is linked to correct load mounting and to limit values for cross sections.
Tempering: The tools must be tempered immediately after quenching, as soon as they reach 60°C. Make at least 2 tempers and between each temper the parts must cool slowly to room temperature. Tempering temperatures should be chosen depending on the desired hardness. he time of each tempering must be at least 2 hours. For pieces larger than 70 mm, the time must be calculated as a function of their dimension.
PROPRIETARY VC-131 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY VC-131 Materiales equivalentes internacionales
Mostrando 15 de 58 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 58 equivalentes internacionales?
Consulte los 58 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 58Referencias cruzadas
- 11Composición
- 1Propiedades mecánicas
- 3Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 54Proveedores Totales