ASTM A 758 Grade 70 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 8595 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASTM A 758 Grade 70 Composición química
A758/A758M: 2024 / Especificación estándar para accesorios de tubería de acero al carbono forjado para soldar a tope con resistencia a la entalladura mejorada.
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ASTM A 758 Grade 70 Propiedades físicas
Temperatura
Este material cuenta con 8595 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASTM A 758 Grade 70 Tratamiento Térmico
- Types 30, 31 and 32 fittings shall be normalized by uniformly heating to a temperature in the austenitizing range, but not to exceed 925°C (1700°F), and subsequently removed from the furnace and air-cooled individually to room temperature.
Types 40, 41 and 42 fittings shall be normalized and after that shall be tempered by heating to a temperature in the range from 595°C to 675°C (1100°F to 1200°F), soaking at that temperature for 1/2 h minimum per 25 mm (1 in.) of thickness, but not less than 15 min, and then air-cooled to room temperature.
Types 50, 51, and 52 fittings shall be quenched-and tempered by uniformly heating to a temperature in the austenitizing range, but not to exceed 925°C (1700°F), and then quenching in a liquid media from the austenitizing temperature to a temperature below 425°C (800°F). After quenching, the fittings shall be reheated to a temperature in the range from 595°C to 675°C (1100°F to 1250°F), soaking at that temperature for 1/2 h minimum per 25 mm (1 in.) of thickness, but not less than 15 min, and then air-cooled to room temperature.
ASTM A 758 Grade 70 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ASTM A 758 Grade 70 Materiales Internacionales Equivalentes
Mostrando 1 de 2 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 2 internacionales equivalentes?
Consulte los grados 2 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 2Referencias cruzadas
- 11Composición
- 3Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- 83Uniones
- -Revestimientos
- -Dimensiones
- 1Tribología
- 8491Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- -Proveedores Totales