PROPRIETARY CRUCIBLE REX M2 Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 32 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CRUCIBLE REX M2 Composición química
Crucible Industries LLC., Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CRUCIBLE REX M2 Propiedades físicas
Temperatura
Este material cuenta con 32 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CRUCIBLE REX M2 Tratamiento Térmico
- Annealed: Heat to 870°C, hold 2 hours, slow cool no faster than 15°C per hour to 535°C, then furnace cool or cool in still air to room temperature. Stress relieved: Annealed Parts: Heat to 595-705°C, hold 2 hours, then furnace cool or cool in still air. Hardened Parts: Heat to 15-30°C below original tempering temperature, hold 2 hours, then furnace cool or cool in still air. Hardened: Preheat: Heat to 790-815°C Equalize. Second Preheat: Suggested for vacuum hardening. Heat to 1010-1040°C. Austenitize: 1150-1220°C, hold time at temperature 5-30 minutes. Quench: Air or positive pressure quench (2 bar minimum) to below 50°C, or salt or interrupted oil quench to about 540°C, then air cool to below 50°C. Temper: Two to three times at 540°C or higher. 2 hours minimum each time. Triple tempering is recommended when hardening from 1150°C or higher. Air cool to room temperature in between tempers.
PROPRIETARY CRUCIBLE REX M2 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 4Referencias cruzadas
- 5Composición
- 13Propiedades mecánicas
- 8Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 1Proveedores Totales