B.S. 1.5752 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 232 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
B.S. 1.5752 Composición química
EN 10084: 2008 / Aceros para cementar. Condiciones técnicas de suministro.
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
B.S. 1.5752 Propiedades físicas
Temperatura
Este material cuenta con 232 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
B.S. 1.5752 Tratamiento Térmico
- End quench test: Quench from 880°C. Carburizing: 880 to 980°C; NOTE: If steels are direct hardened, in general, a carburizing temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020 to 1050°C) are not unusual. Core hardening: 840 to 880°C; Case hardening: 780°C to 820°C; Tempering: 150 to 200°C (as a guide, for 1 hour minimum).
- End quench test austenitizing at 850 ± 5°C (Time for austenitizing as a guide: 30 min minimum);
Carburizing at 880-980°C (The carburizing temperature depends on the chemical composition of the steel, the mass of the product and the carburizing medium. If the steels are direct hardened, in general, a temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020-1050°C) are not unusual);
Direct and simple hardening at 810-850°C (The kind of quenching agent depends on, for example the shape of the products, the cooling conditions and the amount of furnace filling. If the steels are direct hardened and if there is a danger of distortion, they should be quenched from a temperature between the core-hardening and case-hardening temperatures);
Double hardening: Core-hardening at 840-880°C and Case-hardening at 780-820°C;
Tempering at 150-200°C (Time for tempering as a guide: 1h minimum).
B.S. 1.5752 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
B.S. 1.5752 Materiales equivalentes internacionales
Mostrando 15 de 92 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 92 equivalentes internacionales?
Consulte los 92 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 92Referencias cruzadas
- 22Composición
- 17Propiedades mecánicas
- 3Propiedades físicas
- 8Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- 5Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 85Proveedores Totales