AFNOR NF 20NiCrMo2-2 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 670 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
AFNOR NF 20NiCrMo2-2 Composición química
EN 10084: 2008 / Aceros para cementar. Condiciones técnicas de suministro.
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
AFNOR NF 20NiCrMo2-2 Propiedades físicas
Temperatura
Este material cuenta con 670 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
AFNOR NF 20NiCrMo2-2 Tratamiento Térmico
- End quench test austenitizing at 900 ± 5°C (Time for austenitizing as a guide: 30 min minimum);
Carburizing at 880-980°C (The carburizing temperature depends on the chemical composition of the steel, the mass of the product and the carburizing medium. If the steels are direct hardened, in general, a temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020-1050°C) are not unusual);
Direct and simple hardening at 820-860°C (The kind of quenching agent depends on, for example the shape of the products, the cooling conditions and the amount of furnace filling. If the steels are direct hardened and if there is a danger of distortion, they should be quenched from a temperature between the core-hardening and case-hardening temperatures);
Double hardening: Core-hardening at 860-900°C and Case-hardening at 780-820°C;
Tempering at 150-200°C (Time for tempering as a guide: 1h minimum). - End quench test: Quench from 920°C Carburizing: 880 to 980°C; NOTE: If steels are direct hardened, in general, a carburizing temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020 to 1050°C) are not unusual. Core hardening: 860 to 900°C; Case hardening: 780 to 820°C; Tempering: 150 to 200°C (as a guide, for 1 hour minimum).
AFNOR NF 20NiCrMo2-2 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
AFNOR NF 20NiCrMo2-2 Materiales equivalentes internacionales
Mostrando 15 de 319 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 319 equivalentes internacionales?
Consulte los 319 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 319Referencias cruzadas
- 54Composición
- 68Propiedades mecánicas
- 6Propiedades físicas
- 11Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- 5Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- 8Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 199Proveedores Totales