PROPRIETARY Seven Star Tool Steel Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 34 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Seven Star Tool Steel Composición química
Carpenter Technology Corporation, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Seven Star Tool Steel Propiedades físicas
Temperatura
Este material cuenta con 34 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Seven Star Tool Steel Tratamiento Térmico
- Normalizing is not recommended. Annealing: Heat to 830/857°C and cool slowly in the furnace to 593°C at a rate of 11/22°C per hour. Average Brinell hardness is 240. To relieve machining stresses for greater accuracy in hardening, then anneal below the critical 677/704°C and cool slowly. Hardening: Preheat to 760/816°C, then transfer to a superheating furnace with a temperature maintained at 1177/1218°C. When neutral salt baths are used for hardening, the temperature should be dropped 14°C as compared to other furnace temperatures. Quench in oil, ensuring that the tools are cooled below 93°C before tempering. Tempering: Tools should be tempered immediately after the completion of the quench. For best results with most tools, a range of 538/649°C is suitable. For cutting tools, double or triple temper at 538/566°C where max. wear resistance is desired. The approximate hardness as tempered between 538/566°C is Rockwell C 66.
PROPRIETARY Seven Star Tool Steel Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Seven Star Tool Steel Materiales equivalentes internacionales
Mostrando 9 de 9 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 9 equivalentes internacionales?
Consulte los 9 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 9Referencias cruzadas
- 8Composición
- 7Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 6Proveedores Totales