PROPRIETARY D2 Tool Steel Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 205 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY D2 Tool Steel Composición química
Carpenter Technology Corporation, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY D2 Tool Steel Propiedades físicas
Temperatura
Este material cuenta con 205 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY D2 Tool Steel Tratamiento Térmico
- Annealing: heat uniformly to 843/871°C (1550/1600°F), then cool very slowly in the furnace at a rate of not more than 11°C (20°F) per hour until the furnace is black.
Hardening: the hardening temperature must be in range of 982/1024°C (1800/1875°F). Without preheating, place the tool right in the hot furnace and let it heat naturally until its color uniformly matches the color of the thermocouple in the furnace. Tools should be soaked at temperature 20 minutes plus 5 minutes for each 25.4 mm of thickness, then quenched in air.
Stress Relieving: first rough machine, then heat to temperature of 649/677°C (1200/1250°F) and slowly cool.
Tempering: For the best combination of toughness and hardness, temper at 232°C (450°F). Greater ductility can be obtained by tempering at 371°C (700°F), although there will be some sacrifice of hardness. Double tempering is desired with the second temper 13.8°C (25°F) below the first temper.
PROPRIETARY D2 Tool Steel Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY D2 Tool Steel Materiales equivalentes internacionales
Mostrando 15 de 86 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 86 equivalentes internacionales?
Consulte los 86 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 86Referencias cruzadas
- 7Composición
- 11Propiedades mecánicas
- 12Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- 5Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 83Proveedores Totales