PROPRIETARY S7 Alloy Tool Steel Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 141 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY S7 Alloy Tool Steel Composición química
Carpenter Technology Corporation, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY S7 Alloy Tool Steel Propiedades físicas
Temperatura
Este material cuenta con 141 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY S7 Alloy Tool Steel Tratamiento Térmico
- Annealing: Heat to 816/843°C (1501/1549°F) and cool very slowly in the furnace at a rate of not more than 11°C (20°F) per hour to a temperature below 538°C (1000°F), then allow to cool naturally. This will produce a maximum hardness of Brinell 223; Hardening: May be hardened by placing them in the furnace maintained at a temperature of 927/954°C (1701/1749°F). Let the tools heat naturally to the furnace temperature, soak for 20 min. plus 5 min. per 25.4 mm of max. thickness and quench. Sections up to 64.5 mm thick may be cooled in air. Heavier sections, i.e., with section thickness larger than 64.5 mm, should be oil quenched to 66°C (151°F); Stress relieving: Anneal below the critical at 649/677°C (1200/1251°F), a minimum of one hour at temperature and cool slowly; Tempering: The best combination of hardness and toughness is obtained by tempering at about 204°C (399°F). This tempering temperature is therefore suggested for cold-work applications. Tempering at 482/538°C (900/1000°F) is usually desirable for hot-work applications.
PROPRIETARY S7 Alloy Tool Steel Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY S7 Alloy Tool Steel Materiales equivalentes internacionales
Mostrando 9 de 12 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 12 equivalentes internacionales?
Consulte los 12 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 12Referencias cruzadas
- 6Composición
- 106Propiedades mecánicas
- 10Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 6Proveedores Totales