ISO C15E Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 9217 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ISO C15E Composición química
ISO 683-18: 2014 / Aceros tratables térmicamente, aceros aleados y aceros de corte libre - Parte 18: Productos brillantes de acero no aleado y de baja aleación
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ISO C15E Propiedades físicas
Temperatura
Este material cuenta con 9217 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
ISO C15E Tratamiento Térmico
- Carburizing at 880-980°C (The carburizing temperature depends on the chemical composition of the steel, the mass of the product and the carburizing medium. If the steels are direct hardened, in general, a temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020-1050°C) are not unusual);
Direct and simple hardening at 830-870°C (The kind of quenching agent depends on, for example the shape of the products, the cooling conditions and the amount of furnace filling. If the steels are direct hardened and if there is a danger of distortion, they should be quenched from a temperature between the core-hardening and case-hardening temperatures);
Double hardening: Core-hardening at 880-920°C and Case-hardening at 780-820°C;
Tempering at 150-200°C (Time for tempering as a guide: 1h minimum). - Carburizing temperature: 880°-980°C (temperature depends on the chemical composition of the steel, the mass of the product and the carburizing medium. If the steels are direct hardened, in general, a temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1 020°C to 1 050°C) are not unusual; Direct and Simple hardening temperature: 830 to 870°C; Double hardening: Core-hardening temperature 880° to 920°C or Case hardening temperature 780° to 820°C; Tempering temperature: 150° to 200°C, 1h minimum;
ISO C15E Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ISO C15E Materiales equivalentes internacionales
Mostrando 15 de 175 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 175 equivalentes internacionales?
Consulte los 175 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 175Referencias cruzadas
- 36Composición
- 81Propiedades mecánicas
- 3Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- 90Esfuerzo-Deformación
- 90Conformabilidad
- 13Fatiga
- -Fractura
- -Bicho raro
- 83Uniones
- -Revestimientos
- 9Dimensiones
- 1Tribología
- 8491Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 143Proveedores Totales