ASTM A 436 Type 5 Hierros fundidos
Actualizaciones de datos
Este material cuenta con 18 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASTM A 436 Type 5 Composición química
A436: 2024 / Especificación estándar para piezas fundidas de hierro gris austenitico
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ASTM A 436 Type 5 Tratamiento Térmico
- Stress relieved by heating to and holding in the temperature range from 620 to 650°C (1150 to 1200°F) for not less than 1 nor more than 2 h/25 mm of thickness in the thickest section. Heating and cooling shall be uniform and shall be not more than 222°C (400°F))/h for castings less than 25 mm in maximum thickness, nor more than 222°C (400°F))/h divided by the maximum section thickness in mm for thicker castings. During the cooling cycle, castings may be cooled in still air after the temperature has dropped to 315°C (600°F).
Castings may be stabilized by heating at 870°C (1600°F) for 1 h/25 mm of section, for a minimum of 1 h.
Castings with chilled edges or excessive carbides may be annealed at 955 to 1040°C (1750 to 1900°F) for 1/2 to 5 h, followed by uniform cooling, preferably in still air.
ASTM A 436 Type 5 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ASTM A 436 Type 5 Materiales equivalentes internacionales
Mostrando 3 de 5 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 5 equivalentes internacionales?
Consulte los 5 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 5Referencias cruzadas
- 7Composición
- 2Propiedades mecánicas
- -Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- 1Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- 1Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 1Proveedores Totales