ASTM A 333 Grade 7 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 83 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASTM A 333 Grade 7 Composición química
A333/A333M: 2024 / Especificación Estándar para Tubos de Acero sin Costura y Soldados para Servicio de Baja Temperatura y Otras Aplicaciones con Tenacidad de Muesca Necesaria
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ASTM A 333 Grade 7 Propiedades físicas
Temperatura
Este material cuenta con 83 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASTM A 333 Grade 7 Tratamiento Térmico
- Normalize by heating to a uniform temperature of not less than 815°C (1500°F) and cool in air or in the cooling chamber of an atmosphere controlled furnace.
For the seamless process only, reheat and control hot working and the temperature of the hot-finishing operation to a finishing temperature range from 845 - 945°C (1550 - 1750°F) and cool in air or in a controlled atmosphere furnace from an initial temperature of not less than 845°C (1550°F).
Stress Relieving of Test Pieces
When specified in the order the test specimens shall be taken from full thickness test pieces which have been stress relieved after having been removed from the heat-treated pipe. The test pieces shall be gradually and uniformly heated to the 600°C (1100°F), minimum holding time 1 min/mm of thickness or to the 565°C (1050°F), minimum holding time 2 min/mm of thickness or to the 540°C (1000°F), minimum holding time 3 min/mm of thickness; then furnace cooled at a temperature not exceeding 315°C (600°F). For intermediate temperatures, the holding time shall be determined by straight-line interpolation.
ASTM A 333 Grade 7 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ASTM A 333 Grade 7 Materiales equivalentes internacionales
Mostrando 6 de 11 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 11 equivalentes internacionales?
Consulte los 11 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 11Referencias cruzadas
- 7Composición
- 36Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- 14Bicho raro
- 2Uniones
- -Revestimientos
- 3Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 6Proveedores Totales