ASME SA-553 Type II Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 143 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME SA-553 Type II Composición química
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ASME SA-553 Type II Propiedades físicas
Temperatura
Este material cuenta con 143 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME SA-553 Type II Tratamiento Térmico
- All plates shall be heat treated by heating to a suitable temperature within the range of 800 to 925°C (1475 to 1700°F), holding for a sufficient time to obtain uniform temperature throughout the plate thickness and then quenching in water. Subsequently the plates shall be tempered within the range from 565 to 635°C (1050 to 1175°F), holding at this temperature for a minimum of 1,2 min/mm of thickness but not less than 15 min, and cool in air or water quench at a rate not less than 167°C/h (300°F/h).
Prior to the tempering treatment, the plates may be subjected to an intermediate heat treatment consisting of heating to a temperature in the range from 640 to 710°C (1185 to 1310°F); holding at that temperature for a suitable time, but in no case less than 15 min, and then water-quenching to below 150°C (300°F) in the case of plate thicknesses of more than 16 mm or cooling in air or water-quenching to below 150°C (300°F) in the case of plate thicknesses of 16 mm and under.
ASME SA-553 Type II Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ASME SA-553 Type II Materiales equivalentes internacionales
Mostrando 3 de 5 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 5 equivalentes internacionales?
Consulte los 5 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 5Referencias cruzadas
- 6Composición
- 13Propiedades mecánicas
- 59Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- 24Bicho raro
- -Uniones
- -Revestimientos
- 34Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 1Proveedores Totales