JIS SQV1A Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 637 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
JIS SQV1A Composición química
G 3120: 2022 / Chapas de aleaciones de acero al manganeso-molibdeno y manganeso-molibdeno-níquel templadas y revenidas para recipientes a presión
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
JIS SQV1A Propiedades físicas
Temperatura
Este material cuenta con 637 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
JIS SQV1A Tratamiento Térmico
- The heat treatment of steel plates shall be as follows.
a) Steel plates shall be quenched and tempered unless otherwise agreed between the purchaser and the manufacturer. Quenching at 845 to 980°C and tempering at 595°C or over. The steel plates shall be quenched in water after being heated. They shall be tempered while held at that temperature for 30 min or longer per 25 mm in thickness after being heated to a suitable temperature. The minimum holding time shall be 30 min.
b) If the purchaser replaces quenching and specified in a) with other heat treatment, the steel plates shall be as rolled, heat treated by stress relieving annealing, or heat treated by the means as specified, in all cases to be selected by the agreement between the purchaser and the manufacturer.
Steel plates, especially those with thickness of 25 mm or over should be heat treated by stress relieving annealing, because steel plates as rolled are liable to produce cracks by the time the plates are processed by the purchaser; Holding time should be [(1.2 x thickness) min] or over
JIS SQV1A Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
JIS SQV1A Materiales equivalentes internacionales
Mostrando 7 de 10 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 10 equivalentes internacionales?
Consulte los 10 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 10Referencias cruzadas
- 13Composición
- 25Propiedades mecánicas
- 43Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- 1Esfuerzo-Deformación
- 1Conformabilidad
- -Fatiga
- -Fractura
- 21Bicho raro
- -Uniones
- -Revestimientos
- 514Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 8Proveedores Totales