UNI 40 NiCrMo 7 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 338 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
UNI 40 NiCrMo 7 Composición química
UNI 6926: 1971 / Materiales metálicos para aeronave. Acero aleado para endurecimiento y temple (C 0,40%, Ni 1,80%, Cr 0,80% y Mo 0,25%)
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
UNI 40 NiCrMo 7 Propiedades físicas
Temperatura
Este material cuenta con 338 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
UNI 40 NiCrMo 7 Tratamiento Térmico
- Bars and wires were hardened and tempered as follows: Harden by oil quenching from 830 to 850°C, followed by tempering at 530 to 550°C for one hour.
Annealing: Heat to 640 - 680°C, hold for a minimum of 2 hours then slow cool in the furnace (approximately 50°C/hour) to 500°C or below, followed by cooling to room temperature in still air. Normalizing: Heat to 850 - 870°C, hold at temperature for a minimum of 2 hours then cool in still air.
To avoid an unacceptable reduction of toughness, tempering should not be carried out in the range of 280 to 440°C. - Forging: 850-1050°C; Queching: 830-850°C (duration of permanence at hardening must be sufficient so that the transformation of steel structure is complete in whole mass of arc rod the duration should not be less than 1/2 hr.), oil (temperature must be between 15-60°C); Tempering: 550-650°C, at least 1 hour. Jominy test piece hard: 850 +/-5°C (piece must always be normalized before the test). Soft annealing: 640-680°C; Normalizing 850-880°C.
UNI 40 NiCrMo 7 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
UNI 40 NiCrMo 7 Materiales equivalentes internacionales
Mostrando 15 de 104 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 104 equivalentes internacionales?
Consulte los 104 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 104Referencias cruzadas
- 33Composición
- 76Propiedades mecánicas
- 25Propiedades físicas
- 7Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- 15Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 78Proveedores Totales