UNI
Standard · Italy · 1253 references
| Standard number | Materials | |
|---|---|---|
| EN 61249-2-2 EN 61249-2-2 (Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad) | 4 | chevron_right |
| UNI 10221 UNI 10221 (Titanium - Chemical requirements for titanium and titanium alloys for ingots and semi-finished products) | 14 | chevron_right |
| UNI 10233-3 UNI 10233-3 (Steel products drawn, peeled rolled and ground bars. Quality requirements for unalloyed steel) | 38 | chevron_right |
| UNI 10233-4 UNI 10233-4 (Steel products drawn, peeled rolled and ground bars. Quality requirements for unalloyed steel for high speed machining with chips removal) | 14 | chevron_right |
| UNI 10233-5 UNI 10233-5 (Steel products drawn, peeled rolled and ground bars. Quality requirements for engineering alloyed stel) | 27 | chevron_right |
| UNI 10233-6 UNI 10233-6 (Steel products drawn, peeled rolled and ground bars. Quality requirements for stainless steel) | 15 | chevron_right |
| UNI 10258 UNI 10258 (Titanium - Generalities, characteristics and tolerances for titanium and titanium alloy strip, sheet and plate) | 10 | chevron_right |
| UNI 10353 UNI 10353 (Lead alloys for batteries. Pb-Sb, Pb- Ca and Pb-Sn alloys. Types and requirements) | 26 | chevron_right |
| UNI 10450 UNI 10450 (Titanium. Generalities. Characteristics and tolerances for unalloyed titanium and titanium alloy bars.) | 11 | chevron_right |
| UNI 10799 UNI 10799 (Copper and copper alloys - Ingots and castings - Zinc-bronze (CuSn6Zn6)) | 1 | chevron_right |
| UNI 10800 UNI 10800 (Copper and copper alloys - Ingots and castings - Special aluminium bronze (CuAl9Fe3Zn3Ni2) for remelting of mechanical articles with tight tolerances) | 1 | chevron_right |
| UNI 10930 UNI 10930 (Round non alloy and alloy special steel rod for production of core for coated electrodes and for filler metal per gas shielded arc welding and submerged au welding - Technical delivery conditions) | 33 | chevron_right |
| UNI 11037 UNI 11037 (Steel fibre to be used in the preparation of reinforced concrete conglomerate) | 8 | chevron_right |
| UNI 11342 UNI 11342 (Copper and copper alloys. Composite, seamless copper-PE, tubes for fluid distribution) | 3 | chevron_right |
| UNI 2509 UNI 2509 (Unalloyed steel hot rolled strips. Strips for cutting marble and stones (saw blades)) | 3 | chevron_right |
| UNI 2527 UNI 2527 (Bronzes in semi-finished products produced from plastic processing - Quality, requirements, testing) | 9 | chevron_right |
| UNI 2527-1 UNI 2527-1 (Wrought copper alloys. Copper-tin alloys. Chemical composition) | 4 | chevron_right |
| UNI 2528-1 UNI 2528-1 (Wrought copper alloys. Special copper alloys. Chemical composition) | 4 | chevron_right |
| UNI 2955-2 UNI 2955-2 (Hot rolled or forged finished steel products for tools. Special unalloyed steel qualities for cold working) | 6 | chevron_right |
| UNI 2955-3 UNI 2955-3 (Hot rolled or forged finished steel products for tools. Special alloyed steel qualities for cold working) | 26 | chevron_right |
| UNI 2955-4 UNI 2955-4 (Hot rolled or forged finished steel products for tools. Special alloyed steel qualities for hot working) | 10 | chevron_right |
| UNI 2955-5 UNI 2955-5 (Hot rolled or forged finished steel products for tools. Special alloyed high speed steel qualities) | 14 | chevron_right |
| UNI 3021 UNI 3021 (Special aluminum ingots with titanium and chromium for remelting) | 2 | chevron_right |
| UNI 3022 UNI 3022 (Mother alloys of aluminium in ingots - Qualities and requirements) | 14 | chevron_right |
| UNI 3038 UNI 3038 (Silicon for casting. Quality. Standards) | 5 | chevron_right |
| UNI 3040 UNI 3040 (Primary copper-aluminium alloy for castings (Cu 12%)) | 2 | chevron_right |
| UNI 3041 UNI 3041 (Primary magnesium-iron-copper-aluminium alloy for casting (Cu 10% - Fe 1% - Mg 0.3%)) | 2 | chevron_right |
| UNI 3042 UNI 3042 (Primary aluminum-copper-nickel-silicium-magnesium alloy for casting (Cu 10% - Ni 1.5% - Si 1% - Mg 0.25% - Ti 0.15%)) | 2 | chevron_right |
| UNI 3043 UNI 3043 (Primary copper-aluminium alloy for casting. (Cu 8%)) | 2 | chevron_right |
| UNI 3044 UNI 3044 (Primary copper-aluminum alloy for casting. (Cu 4.5%)) | 2 | chevron_right |
| UNI 3045 UNI 3045 (Primary magnesium-nickel-copper-aluminum alloy for casting (Cu 4% - Ni 2% - Mg 1.5%)) | 2 | chevron_right |
| UNI 3046 UNI 3046 (Primary nickel-magnesium-iron-copper- aluminium alloy for castings (Cu 3% - Fe 1.5% - Si 0.7% - Mg 0.6% - Ni 0.6% - Ti 0.15%)) | 3 | chevron_right |
| UNI 3048 UNI 3048 (Primary manganese-copper-silicon-aluminum alloy for casting. (Si 13% - Cu 0.8% - Mn 0.3%)) | 2 | chevron_right |
| UNI 3049 UNI 3049 (Primary aluminum-silicon-magnesium alloy for castings (Si 12% - Mn 0.5% - Mg 0.3%)) | 2 | chevron_right |
| UNI 3050 UNI 3050 (Primary nickel-magnesium-copper-silicon- aluminum alloy for casting (Si 10% - Cu 2.2% - Mg 1.4% - Ni 1%)) | 2 | chevron_right |
| UNI 3051 UNI 3051 (Primary magnesium-manganese-silicon- aluminum alloy for casting (Si 9% - Mn 0.5% - Mg 0.35%)) | 2 | chevron_right |
| UNI 3052 UNI 3052 (Primary copper-silicon-aluminum alloy for casting (Si 5.5% - Cu 4%)) | 2 | chevron_right |
| UNI 3054 UNI 3054 (Primary magnesium-manganese-silicon- aluminum alloy for casting (Si 4.5% - Mn 0.7% - Mg 0.65%)) | 2 | chevron_right |
| UNI 3055 UNI 3055 (Primary magnesium-manganese-silicon- aluminum alloy for casting (Si 2% - Mn 0.7% - Mg 0.65%)) | 2 | chevron_right |
| UNI 3058 UNI 3058 (Primary magnesium-aluminum alloy for casting. (Mg 5%)) | 2 | chevron_right |
| UNI 3059 UNI 3059 (Primary magnesium-aluminum alloy for casting. (Mg 3%)) | 2 | chevron_right |
| UNI 3097 UNI 3097 (Hot rolled or forced or cold drawn, special alloyed steel finished products for rolling bearings. Qualities, requirements and tests) | 15 | chevron_right |
| UNI 3102 UNI 3102 (Ferro-phosphorus, silicon, silicon- calcium, silicon-manganese-aluminium. Requirements and delivery conditions) | 6 | chevron_right |
| UNI 3158 UNI 3158 (Cast unalloyed quality steels for general engineering purposes. Qualities, requirements and tests) | 4 | chevron_right |
| UNI 3159 UNI 3159 (Stainless, heat resisting steel and alloy sand castings. Qualities, requirements and tests) | 16 | chevron_right |
| UNI 3160 UNI 3160 (Special, wear-resisting steel sand castings. Qualities, requirements and tests) | 7 | chevron_right |
| UNI 3161 UNI 3161 (Stainless, corrosion resisting steel sand castings. Qualities, requirements and tests) | 19 | chevron_right |
| UNI 3270 UNI 3270 (Antimony. Qualities. Requirements) | 6 | chevron_right |
| UNI 3310-1 UNI 3310-1 (Semi-finished products, Copper, brass, leaded brass and special brass bars and sections, Mechanical characteristics) | 32 | chevron_right |
| UNI 3310-2 UNI 3310-2 (Semi-finished products, Copper, brass, leaded brass and special brass plates, strips, and flat bars, Mechanical characteristics) | 19 | chevron_right |
| UNI 3310-3 UNI 3310-3 (Semi-finished products, Copper, brass, leaded brass and special brass tubes, Mechanical characteristics) | 13 | chevron_right |
| UNI 3310-4 UNI 3310-4 (Semi-finished products. Copper, brass and leaded brass wires. Mechanical characteristics) | 14 | chevron_right |
| UNI 3353 UNI 3353 (Nickel, Quality, Requirements) | 4 | chevron_right |
| UNI 3545 UNI 3545 (Hot rolled special alloyed steel finished products, bars and wire rod, for quenched and tempered springs. Qualities, requirements and tests) | 9 | chevron_right |
| UNI 3566 UNI 3566 (Primary Aluminium ALP 99.5 for plastic processing) | 2 | chevron_right |
| UNI 3567 UNI 3567 (Primary Aluminium ALP 99.0 for plastic processing) | 2 | chevron_right |
| UNI 3568 UNI 3568 (Primary Aluminium - Manganese alloy for plastic processing (Mn 1.2%)) | 2 | chevron_right |
| UNI 3570 UNI 3570 (Primary aluminium-silicon-magnesium alloy for electrical conductors (Si 0.5%, Mg 0.5%)) | 2 | chevron_right |
| UNI 3571 UNI 3571 (Primary wrought aluminium-silicium-magnesium-manganese alloy (Si 1% - Mg 0.6% - Mn 0.3%)) | 2 | chevron_right |
| UNI 3573 UNI 3573 (Primary wrought aluminium-magnesium alloy (Mg 1.5%)) | 2 | chevron_right |
| UNI 3574 UNI 3574 (Primary wrought aluminium-magnesium alloy (Mg 2.5%)) | 3 | chevron_right |
| UNI 3575 UNI 3575 (Primary wrought aluminium-magnesium alloy (Mg 3.5%)) | 2 | chevron_right |
| UNI 3576 UNI 3576 (Primary wrought aluminium-magnesium alloy (Mg 5%)) | 3 | chevron_right |
| UNI 3577 UNI 3577 (Primary wrought aluminium-copper-magnesium-silicium alloy (Cu 2.5% - Mg 0.3% - -Si 0.3%)) | 2 | chevron_right |
| UNI 3579 UNI 3579 (Primary wrought aluminium-copper-magnesium-manganese alloy (Cu 4% - Mg 0.5% - Mn 0.5%)) | 2 | chevron_right |
| UNI 3580 UNI 3580 (Primary wrought aluminium-copper-magnesium-manganese clad alloy (Cu 4% - Mg 0.5% - Mn 0.5%)) | 2 | chevron_right |
| UNI 3595 UNI 3595 (Unalloyed quality steels for castings with magnetic properties. Qualities, requirements and tests) | 5 | chevron_right |
| UNI 3608 UNI 3608 (Special steel sand castings, resistant to mechanical stresses at elevated temperatures. Qualities, requirements and tests) | 8 | chevron_right |
| UNI 3717 UNI 3717 (Zinc alloy ingots. Qualities, requirements, tests) | 3 | chevron_right |
| UNI 3816 UNI 3816 (Cadmium. Qualities. Requirements) | 8 | chevron_right |
| UNI 3872 UNI 3872 (Seamless steel tubing. tubes for sea boiler and naval tubing under pressure. Quality, Prescriptions and Testing) | 5 | chevron_right |
| UNI 3950 UNI 3950 (Unalloyed aluminium ingots for remelting. Quality. Prescriptions) | 12 | chevron_right |
| UNI 3965 UNI 3965 (Steel in hot-rolled products - Plates with a thickness ≥ 4.76 mm for steam boilers and pressure vessels) | 6 | chevron_right |
| UNI 3992 UNI 3992 (Hot rolled finished special alloyed steel products. Round bars for internal combustion engine valves) | 6 | chevron_right |
| UNI 4010 UNI 4010 (Unalloyed and alloyed high strength steels for castings. Qualities, requirements and tests) | 6 | chevron_right |
| UNI 4507 UNI 4507 (Primary Aluminium ALP 99.5 for plastic processing) | 2 | chevron_right |
| UNI 4508 UNI 4508 (Primary Aluminium ALP 99.7 for plastic processing) | 2 | chevron_right |
| UNI 4509 UNI 4509 (Primary Aluminium ALP 99.8 for plastic processing) | 2 | chevron_right |
| UNI 4510 UNI 4510 (Primary wrought aluminum-magnesium alloy for decorative applications (Mg 0.9%)) | 1 | chevron_right |
| UNI 4511 UNI 4511 (Aluminum-magnesium alloy hyperpure by plastic working for decorative applications (Mg 2%)) | 1 | chevron_right |
| UNI 4514 UNI 4514 (Aluminum-silicon primary alloy for castings (Si 13%)) | 2 | chevron_right |
| UNI 4515 UNI 4515 (White metal bearing alloys - tin base, in ingot forms, Qualities, requirements and tests) | 12 | chevron_right |
| UNI 4544 UNI 4544 (Spheroidal graphite cast iron - classification) | 6 | chevron_right |
| UNI 4838 UNI 4838 (Hot rolled unalloyed steel finished products, bars and wire rod, for high speed machining with removal of chips. Qualities, requirements and tests) | 14 | chevron_right |
| UNI 4891 UNI 4891 (Copper alloys for plastic processing. Binary brass with Cu 60% and Zn 40%) | 2 | chevron_right |
| UNI 4892 UNI 4892 (Copper alloys for plastic processing. Binary brass with Cu 63% and Zn 37%) | 2 | chevron_right |
| UNI 4893 UNI 4893 (Copper alloys for plastic processing. Binary brass with Cu 65% and Zn 35%) | 2 | chevron_right |
| UNI 4894 UNI 4894 (Copper alloys for plastic processing. Binary brass with Cu 67% and Zn 33%) | 2 | chevron_right |
| UNI 4895 UNI 4895 (Copper alloys for plastic processing. Binary brass with Cu 70% and Zn 30%) | 2 | chevron_right |
| UNI 4896 UNI 4896 (Copper alloys for plastic processing. Binary brass with Cu 72% and Zn 28%) | 2 | chevron_right |
| UNI 4897 UNI 4897 (Copper alloys for plastic processing. Binary brass with Cu 80% and Zn 20%) | 2 | chevron_right |
| UNI 4898 UNI 4898 (Copper alloys for plastic processing. Binary brass with Cu 85% and Zn 15%) | 2 | chevron_right |
| UNI 4899 UNI 4899 (Copper alloys for plastic processing. Binary brass with Cu 90% and Zn 10%) | 2 | chevron_right |
| UNI 5007 UNI 5007 (Grey iron for castings. Qualities, requirements and tests) | 6 | chevron_right |
| UNI 5033 UNI 5033 (Copper alloy ingots and castings. Binary brass with Cu 60 percent and Zn 40 percent) | 2 | chevron_right |
| UNI 5034 UNI 5034 (Copper alloy ingots and castings, Binary brass with Cu 64 percent and Zn 36 percent) | 2 | chevron_right |
| UNI 5035 UNI 5035 (Copper alloy ingots and castings. Special brass with Cu 60 percent, Zn 38 percent and Pb 2 percent) | 2 | chevron_right |
| UNI 5036 UNI 5036 (Copper alloy ingots and castings. Special brass with Cu 64 percent, Zn 34 percent and Pb 2 percent) | 2 | chevron_right |
| UNI 5037 UNI 5037 (Copper alloy ingots and castings, Special brass with Cu 60 percent, Zn 39 percent and Si 1 percent) | 2 | chevron_right |
| UNI 5038 UNI 5038 (Copper alloy ingots and castings, Special brass with Cu 62 percent, Zn 36 percent, Si 1 percent and Pb 1 percent) | 2 | chevron_right |
| UNI 5074 UNI 5074 (Pressure die casting aluminium-silicon- magnesium-iron alloy (Si 9%, Mg 0,5%, Fe 0,9%)) | 2 | chevron_right |
| UNI 5075 UNI 5075 (Pressure die casting aluminium-silicon- copper-iron alloy (Si 8,5%, Cu 3,5%, Fe 0,9%)) | 2 | chevron_right |
| UNI 5076 UNI 5076 (Pressure die casting aluminium-silicon- copper-iron alloy (Si 12%, Cu 2%, Fe 0,9%)) | 2 | chevron_right |
| UNI 5077 UNI 5077 (Pressure die casting aluminium-silicon-iron alloy (Si 5%, Fe 0,8%)) | 2 | chevron_right |
| UNI 5078 UNI 5078 (Aluminum-silicon-iron alloy for pressure casting (Si 9% - Fe 0.7%)) | 1 | chevron_right |
| UNI 5079 UNI 5079 (Pressure die casting aluminium-silicon- iron alloy (Si 13%, Fe 0,9%)) | 2 | chevron_right |
| UNI 5080 UNI 5080 (Pressure die casting aluminium- magnesium-iron alloy (Mg 7,5%; Fe 0,8%)) | 2 | chevron_right |
| UNI 5273 UNI 5273 (Copper alloy ingots and casts, Special copper alloy with Cu 88%, Al 9% and Fe 3%) | 1 | chevron_right |
| UNI 5274 UNI 5274 (Copper alloy ingots and casts, Special copper alloy with Cu 85%, Al 11% and Fe 4%) | 1 | chevron_right |
| UNI 5275 UNI 5275 (Copper alloy ingots and casts, Special copper alloy with Cu 81%, Al 11%, Fe 4% and Ni 4%) | 1 | chevron_right |
| UNI 5330 UNI 5330 (Unalloyed grey iron for sand castings for use in the automobile industry. Qualities, requirements and tests) | 5 | chevron_right |
| UNI 5334 UNI 5334 (Steels for general use in hot rolled products - Sections, bars and wide flats) | 19 | chevron_right |
| UNI 5452 UNI 5452 (Primary magnesium-aluminium alloy for plastic processing (Mg 44%)) | 3 | chevron_right |
| UNI 5462 UNI 5462 (Weldless steel pipes. Pipes for boilers and for high-temperature, high-pressure heating systems. Requirements and tests) | 4 | chevron_right |
| UNI 5598 UNI 5598 (General purpose unalloyed steel wire rod for drawing) | 30 | chevron_right |
| UNI 5649-1 UNI 5649-1 (Copper, Wrought coppers, Qualities, requirements and tests) | 7 | chevron_right |
| UNI 5649-2 UNI 5649-2 (Copper, Wrought alloyed coppers, Qualities, requirements and tests) | 17 | chevron_right |
| UNI 5649-3 UNI 5649-3 (Copper, Electrolytic cathode copper, Qualities, requirements and tests) | 2 | chevron_right |
| UNI 5649-4 UNI 5649-4 (Copper, Drawing stock (wire rod), Quality, requirements and tests) | 11 | chevron_right |
| UNI 5705 UNI 5705 (Wrought copper alloys, Leaded brass Cu 58%, Zn 40% and Pb 2%) | 2 | chevron_right |
| UNI 5706 UNI 5706 (Wrought copper alloys, Leaded brass Cu 59%, Zn 39% and Pb 2%) | 2 | chevron_right |
| UNI 5707 UNI 5707 (Wrought copper alloys, Leaded brass Cu 63%, Zn 35% and Pb 2%) | 2 | chevron_right |
| UNI 5747 UNI 5747 (Draw-hooks for railway cars - Ouality, requirements and tests) | 1 | chevron_right |
| UNI 5753 UNI 5753 (Continuously hot-dip zinc-coated unalloyed steel flat products. Steel sheets and plates thickness up to 3 mm) | 10 | chevron_right |
| UNI 5764 UNI 5764 (Wrought primary aluminium-magnesium alloy (Mg 0.8 %)) | 1 | chevron_right |
| UNI 5771 UNI 5771 (Not alloyed and alloyed steel rounds for chains with forge welded and electrical welded links. Quality, requirements and tests) | 5 | chevron_right |
| UNI 5866 UNI 5866 (Cold rolled flat finished unalloyed steel products. Drawing or cold bending sheets and strip) | 3 | chevron_right |
| UNI 5867 UNI 5867 (Hot rolled flat finished unalloyed steel products. Drawing or cold bending sheets and coils. Qualities, requirements and tests) | 4 | chevron_right |
| UNI 5869 UNI 5869 (Hot rolled fiat finished Steel products - Plates for boilers and pressure vessels) | 21 | chevron_right |
| UNI 5961 UNI 5961 (Cold rolled flat finished unalloyed steel products. Strips and cut lengths for cold forming. Qualities, requirements and tests.) | 11 | chevron_right |
| UNI 6102 UNI 6102 (Alloy quality steel raw tyres for wheel sets of railway tractive units. Quality, requirements and tests) | 1 | chevron_right |
| UNI 6138 UNI 6138 (Cast copper alloys, Special brass with Cu 59%, Zn 38%, Al1%, Fe 1%, and Mn 1%) | 2 | chevron_right |
| UNI 6139 UNI 6139 (Cast copper alloys, Special brasses with Cu 56%, Zn 39%, Al 2%, Mn 2%, and Fe 1%) | 4 | chevron_right |
| UNI 6169 UNI 6169 (Casting primary magnesium-aluminium- zinc-manganese alloy (Al 8,5%, Zn 0,6%, Mn 0,2%)) | 2 | chevron_right |
| UNI 6170 UNI 6170 (Wrought primary aluminum-magnesium-silicon-copper-chromium alloy (Mg 1% - Si 0.6% - Cu 0.25% - Cr 0.25%)) | 1 | chevron_right |
| UNI 6250 UNI 6250 (Casting primary aluminium-silicon- nickel-magnesium-copper alloy (Si 12,7%, Ni 2,2%, Mg 1%, Cu 0,8%)) | 2 | chevron_right |
| UNI 6251 UNI 6251 (Casting primary aluminium-silicon- copper-nickel-manganese- magnesium- cobalt alloy (Si 21%, Cu 1,6%, Ni 1,5%, Mn 0,7%, Mg 0,7%, Co 0,8%)) | 2 | chevron_right |
| UNI 6252 UNI 6252 (Casting primary aluminium-tin-silicon- copper- nickel alloy (Sn 6%, Si 1,2%, Cu 1%, Mn 1%, Ti 0,12%)) | 2 | chevron_right |
| UNI 6253 UNI 6253 (Casting primary aluminium-nickel- manganese alloy (Ni 2%, Mn 2%, Ti 0,15%)) | 2 | chevron_right |
| UNI 6328 UNI 6328 (Steel rails for railway lines. Qualities, requirements and tests) | 4 | chevron_right |
| UNI 6345 UNI 6345 (Cast copper alloys, Naval special brass with Cu 62%, Zn 37% and Sn 1%) | 2 | chevron_right |
| UNI 6358 UNI 6358 (Alloy quality steel raw tyres for wheel sets of railway hauled vehicles. Quality, requirements and tests) | 1 | chevron_right |
| UNI 6359 UNI 6359 (Wrought primary aluminium-magnesium- silicon-copper alloy (Mg 0,50%, Si 0,45%, Cu 0,10%)) | 2 | chevron_right |
| UNI 6360 UNI 6360 (Wrought primary aluminium-magnesium- copper alloy (Mg 0,9%, Cu 0,1%)) | 2 | chevron_right |
| UNI 6361 UNI 6361 (Wrought primary aluminium-manganese-magnesium alloy (Mn 1.2% - Mg 1.2%)) | 1 | chevron_right |
| UNI 6362 UNI 6362 (Wrought primary aluminium-copper-lead-bismuth alloy (Cu 5.5% - Pb 0.5% - Bi 0.5%)) | 1 | chevron_right |
| UNI 6363 UNI 6363 (Welded and seamless steel tubes for water mains) | 3 | chevron_right |
| UNI 6398 UNI 6398 (Wrought copper-alloys, Special brass Cu 58%, Zn 39%, Al 1%, Fe and Mn) | 2 | chevron_right |
| UNI 6399 UNI 6399 (Wrought copper-alloys, Special brass Cu 60%, Zn 39% and Sn 1%) | 2 | chevron_right |
| UNI 6400 UNI 6400 (Wrought copper-alloys, Special brass Cu 71%, Zn 28% and Sn 1%) | 2 | chevron_right |
| UNI 6401 UNI 6401 (Wrought copper-alloys, Special brass Cu 77%, Zn 21% and Al 2%) | 2 | chevron_right |
| UNI 6403 UNI 6403 (Seamless steel tubes, intended and not intended for heat treatment, for use in road vehicles and for specific purposes) | 20 | chevron_right |
| UNI 6551 UNI 6551 (Forged, special alloyed steel normalized axles for wheel sets of railway vehicles. Quality, requirements and tests) | 1 | chevron_right |
| UNI 663 UNI 663 (Unalloyed steel seamless tubes. Plain end tubes for general purposes. Qualities, requirements and tests) | 9 | chevron_right |
| UNI 6681 UNI 6681 (Hot rolled flat finished unalloyed steel products. Strips for cold rolling. Qualities, requirements and tests) | 4 | chevron_right |
| UNI 6683 UNI 6683 (Hot rolled flat finished unalloyed steel products. Strips for cold drawing or cold bending. Qualities, requirements and tests) | 4 | chevron_right |
| UNI 6785 UNI 6785 (Copper and copper-alloy seamless tubes for heat exchangers, condensers and evaporators, Qualities, dimensions, requirements and tests) | 12 | chevron_right |
| UNI 6786 UNI 6786 (Forged special alloyed steel hardened and tempered axles with high characteristics of fatigue for wheel sets of railway vehicles and traction units. Quality, requirements and tests) | 2 | chevron_right |
| UNI 6787 UNI 6787 (Forged special alloyed steel hardened and tempered axles with high characteristics of fatigue and of toughness, for wheel sets of railway vehicles and traction units. Quality, requirements and tests) | 1 | chevron_right |
| UNI 6860 UNI 6860 (Cast wheel centres of unalloyed or low alloyed steel for wheel sets of locomotives and railcars. Quality, requirements and tests) | 1 | chevron_right |
| UNI 6896 UNI 6896 (Wrougth copper-alloys, High tensile special brass Cu 58%, Zn 39%, Al 1%, Fe 1% and Mn 1%) | 2 | chevron_right |
| UNI 6897 UNI 6897 (Wrougth copper-alloys, High tensile special brass Cu 62%, Zn 32%, Mn 3%, Al 2%, Fe and Ni) | 2 | chevron_right |
| UNI 6900 UNI 6900 (Special alloyed, corrosion and heat resisting, stainless steels) | 41 | chevron_right |
| UNI 6901 UNI 6901 (Semi-finished products and hot-rolled or forged bars and rods of special alloyed stainless steel, resistant to corrosion and heat) | 41 | chevron_right |
| UNI 6904 UNI 6904 (Seamless tubes of special alloyed, corrosion and heat resisting, stainless steels) | 28 | chevron_right |
| UNI 6922 UNI 6922 (Aircraft metallic materials. Unalloyed steel (C 0,21 %)) | 1 | chevron_right |
| UNI 6923 UNI 6923 (Aircraft metallic materials. Hardening and tempering unalloyed steel (C 0.40 %)) | 1 | chevron_right |
| UNI 6924 UNI 6924 (Aircraft metallic materials. Hardening and tempering alloyed steel (C 0,30%, Ni 2,95%, Cr 0,75% and Mo 0,50%)) | 1 | chevron_right |
| UNI 6925 UNI 6925 (Aircraft metallic materials. Hardening and tempering alloyed steel (C 0,35%, Ni 3,75%, Cr 1,75% and Mo 0,35%)) | 1 | chevron_right |
| UNI 6926 UNI 6926 (Aircraft metallic materials. Hardening and tempering alloyed steel (C 0,40%, Ni 1,80%, Cr 0,80% and Mo 0,25%)) | 1 | chevron_right |
| UNI 6927 UNI 6927 (Aircraft metallic materials. Hardening and tempering alloyed steel, weldable (C 0,15%, Cr 1,40%, Mo 0,90% and V 0,25%)) | 1 | chevron_right |
| UNI 6928 UNI 6928 (Aircraft metallic materials. Hardening and tempering alloyed steel weldable (C 0,25%, Cr 1,0%, and Mo 0,20%)) | 1 | chevron_right |
| UNI 6929 UNI 6929 (Aircraft metallic materials. Hardening and tempering alloyed steel, weldable (C 0,35%, Cr 1,0% and Mo 0,20%)) | 1 | chevron_right |
| UNI 6930 UNI 6930 (Aircraft metallic materials. Hardening and tempering low alloyed steel, weldable (C 0,21% and Mn 1,50%)) | 1 | chevron_right |
| UNI 6931 UNI 6931 (Aircraft metallic materials. Nitriding alloyed steel (C 0,31%, Cr 3,05% and Mo 0,40%)) | 1 | chevron_right |
| UNI 6932 UNI 6932 (Aircraft metallic materials. Case hardening alloyed steel (C 0,15%, Ni 3,25%, Cr 0,95% and Mo 0,23%)) | 1 | chevron_right |
| UNI 6933 UNI 6933 (Aircraft metallic materials. Case hardening alloyed steel (C 0,18%, Ni 4,0%, and Cr 0,95%)) | 1 | chevron_right |
| UNI 6934 UNI 6934 (Aircraft metallic materials. Case hardening alloyed steel (C 0,12%, Ni 0,65% and Cr 0,55%)) | 1 | chevron_right |
| UNI 6935 UNI 6935 (Aircraft metallic materials. Case hardening alloyed steel (C 0,10%, Mi 3,25%, Cr 1,20% and Mo 0,11%)) | 1 | chevron_right |
| UNI 6936 UNI 6936 (Aircraft metallic materials. Austenitic stainless steel (C 0,07%, Cr 18% and Ni 9,5%)) | 1 | chevron_right |
| UNI 6937 UNI 6937 (Aircraft metallic materials. Austenitic stainless steel (C 0,06%, Cr 18%, Ni 10,5% and Ti 5 C)) | 1 | chevron_right |
| UNI 6938 UNI 6938 (Aircraft metallic materials. Austenitic stainless steel (C 0,12%, Cr 17% and Ni 7%)) | 1 | chevron_right |
| UNI 6939 UNI 6939 (Aircraft metallic materials. Austenitic stainless steel (C 0,03%, Cr 18% and Ni 10,5%)) | 1 | chevron_right |
| UNI 6940 UNI 6940 (Aircraft metallic materials. Austenitic stainless steel (C 0,10%, Cr 18% and Ni 9%)) | 1 | chevron_right |
| UNI 6941 UNI 6941 (Aircraft metallic materials. Austenitic stainless steel (C 0,06%, Cr 18%, Ni 10,5% and Nb 10 C)) | 1 | chevron_right |
| UNI 6942 UNI 6942 (Aircraft metallic materials. Martensitic steel (C 0,11% and Cr 12,5%)) | 1 | chevron_right |
| UNI 6943 UNI 6943 (Aircraft metallic materials. Martensitic controlled ferrite stainless steel (C 0,13%, Cr 12,25% and Ni 0,55%)) | 1 | chevron_right |
| UNI 7013-1 UNI 7013-1 (Cast copper alloys, Copper-tin alloy Cu 90% and Sn 10%) | 2 | chevron_right |
| UNI 7013-10 UNI 7013-10 (Cast copper alloys, Special copper-tin- zinc-nickel alloy Cu 86%, Sn 10%, Zn 2% and Ni 2%) | 2 | chevron_right |
| UNI 7013-2 UNI 7013-2 (Cast copper alloys, Copper-tin alloy Cu 88% and Sn 12%) | 2 | chevron_right |
| UNI 7013-3 UNI 7013-3 (Cast copper alloys, Leaded bronze Cu 80%, Sn 10% and Pb 10%) | 2 | chevron_right |
| UNI 7013-4 UNI 7013-4 (Cast copper alloys, Leaded bronze Cu 77%, Sn 8% and Pb 15%) | 2 | chevron_right |
| UNI 7013-5 UNI 7013-5 (Cast copper alloys, Leaded bronze Cu 75%, Sn 5% and Pb 20%) | 2 | chevron_right |
| UNI 7013-6 UNI 7013-6 (Cast copper alloys, Special copper-tin alloy Cu 88%, Sn 10% and Zn 2%) | 2 | chevron_right |
| UNI 7013-7 UNI 7013-7 (Cast copper alloys, Special copper-tin- lead alloy Cu 83%, Sn 7%, Zn 4% and Pb 6%) | 2 | chevron_right |
| UNI 7013-8 UNI 7013-8 (Cast copper alloys, Special copper-tin- lead alloy Cu 85%, Sn 5%, Zn 5% and Pb 5%) | 2 | chevron_right |
| UNI 7013-9 UNI 7013-9 (Cast copper alloys, Special copper-tin- lead alloy Cu 80%, Sn 3%, Zn 10% and Pb 7%) | 2 | chevron_right |
| UNI 7064 UNI 7064 (Cold rolled flat finished products of special alloy and unalloyed steel. Strips for springs. Qualities, requirements and tests) | 9 | chevron_right |
| UNI 7065 UNI 7065 (Cold rolled flat finished unalloyed steel products. Strips with carbon content between 0.10 and 0.60%) | 17 | chevron_right |
| UNI 7070 UNI 7070 (Hot rolled finished products of unalloyed basis and quality steel. Sections, merchant bars, wide flats, plates, sheets, strips and coils for structural and engineering purposes. Qualities, requirements and tests) | 33 | chevron_right |
| UNI 7091 UNI 7091 (Unalloyed steel welded pipes. Smooth pipes for general uses) | 4 | chevron_right |
| UNI 7175 UNI 7175 (Forged and rolled wheel centres of unalloyed steel for wheel sets of railway vehicles and traction units. Quality, requirements and tests) | 1 | chevron_right |
| UNI 7176 UNI 7176 (Forged and rolled wheel centres of special alloyed steel for wheel sets of railway vehicles and traction units. Quality, requirements and tests) | 1 | chevron_right |
| UNI 7279 UNI 7279 (Wrougth copper-alloys, Special brass Cu 60%, Zn 39% and Pb 1%) | 2 | chevron_right |
| UNI 7280-1 UNI 7280-1 (Wrought copper alloys, Copper-nickel alloys, Chemical composition) | 7 | chevron_right |
| UNI 7280-2 UNI 7280-2 (Wrought copper alloys, Copper-nickel alloys, Mechanical characteristics of semi-finished products) | 7 | chevron_right |
| UNI 7287 UNI 7287 (Seamless plain end tubes made from basis non-alloy steel) | 1 | chevron_right |
| UNI 7316 UNI 7316 (Steel for castings suitable for welded structural parts exposed to pressure. Qualities, requirements and tests) | 7 | chevron_right |
| UNI 7317 UNI 7317 (Steels with low temperature toughness for castings subject to pressure. Qualities, requirements and tests) | 4 | chevron_right |
| UNI 7356 UNI 7356 (Hot rolled finished steel products. Wire rods and round bars for cold- or hot-headed bolts, nuts and rivets) | 33 | chevron_right |
| UNI 7363 UNI 7363 (Pressure die casting aluminium-silicon- copper-iron-zinc alloy (Si 12%, Cu 2%, Fe 0,9%, Zn)) | 2 | chevron_right |
| UNI 7369-2 UNI 7369-2 (Casting aluminium-silicon-copper secondary alloy (Si 12%, Cu 1%)) | 2 | chevron_right |
| UNI 7369-3 UNI 7369-3 (Casting aluminium secondary alloys, Aluminium-silicon-copper alloy (Si 9%, Cu 1%)) | 2 | chevron_right |
| UNI 7369-4 UNI 7369-4 (Casting aluminium-silicon-copper secondary alloy (Si 6%, Cu 4%)) | 2 | chevron_right |
| UNI 7369-5 UNI 7369-5 (Casting aluminium-silicon-copper-zinc secondary alloy (Si 6%, Cu 4%, Zn 3%)) | 2 | chevron_right |
| UNI 7369-6 UNI 7369-6 (Casting aluminium secondary alloys, Aluminium-silicon-copper alloy (Si 6%, Cu 2%)) | 2 | chevron_right |
| UNI 7382 UNI 7382 (Cold rolled flat finished products of special steel. Plates and strips with thickness greater than or equal to 3 mm for highly stressed finished structures) | 18 | chevron_right |
| UNI 7464 UNI 7464 (Cast special alloyed steel wheel centres for wheel sets of railway traction units. Quality, requirements and tests) | 1 | chevron_right |
| UNI 7500 UNI 7500 (Hot and cold rolled flat finished alloyed austenitic stainless steel products. Plates and strips for boilers and pressure vessels) | 18 | chevron_right |
| UNI 7660 UNI 7660 (Forged finished steel products for pressure vessels. Qualities, requirements and tests) | 78 | chevron_right |
| UNI 7675 UNI 7675 (Wires for prestressed concrete) | 5 | chevron_right |
| UNI 7676 UNI 7676 (Strands with 2-3 wires and strands with 7 wires for prestressed concrete) | 7 | chevron_right |
| UNI 7683 UNI 7683 (Threaded tubes and fittings for cable conduits for explosion proof electrical installations. Unalloyed steel seamless and welded tubes, galvanized) | 1 | chevron_right |
| UNI 7729 UNI 7729 (Plain end seamless unalloyed quality steel tubes for mechanical application) | 3 | chevron_right |
| UNI 7730 UNI 7730 (Hollow unalloyed quality steel bars for machining) | 2 | chevron_right |
| UNI 7737 UNI 7737 (Austenitic cast iron for castings. Qualities, requirements and tests) | 20 | chevron_right |
| UNI 7746 UNI 7746 (Quality unalloyed steel finished products, forged or drop forged. Quality, requirements and tests) | 12 | chevron_right |
| UNI 7788 UNI 7788 (Wrought primary aluminìum-manganese-copper alloy (Mn 1.2% - Cu 0.12%)) | 1 | chevron_right |
| UNI 7789 UNI 7789 (Wrought primary aluminium-magnesium- manganese alloy (Mg 2,7%; Mn 0,8%)) | 2 | chevron_right |
| UNI 7790 UNI 7790 (Wrought primary aluminium-magnesium- manganese-chromium alloy (Mg 4,5%; Mn 0,7%; Cr 0,15%)) | 2 | chevron_right |
| UNI 7791 UNI 7791 (Wrought primary aluminium-zinc- magnesium alloy (Zn 4,5%; Mg 1,2%; Mn 0,25%)) | 1 | chevron_right |
| UNI 7806 UNI 7806 (Unalloyed quality steel - Hot finished hollow sections of steel and special alloy steel for structural purposes) | 10 | chevron_right |
| UNI 7810 UNI 7810 (Cold-finished steel products for structural purposes. Hollow sections. Qualities, requirements and tests) | 9 | chevron_right |
| UNI 7845 UNI 7845 (Steel products, bars and coils, for quenching tempering - qualities, requirements and tests) | 20 | chevron_right |
| UNI 7846 UNI 7846 (Finished products in hot rolled unalloyed or special hardening alloyed steel bars and rolls. Quality, requirements and tests) | 13 | chevron_right |
| UNI 7847 UNI 7847 (Hot rolled, unalloyed and alloyed special steel products, bars and coils, for surface hardening. Qualities, requirements and tests) | 10 | chevron_right |
| UNI 7856 UNI 7856 (Pig iron. Definition, classification and qualities) | 67 | chevron_right |
| UNI 7857 UNI 7857 (Spiegeleisen. Qualities, requirements and tests) | 4 | chevron_right |
| UNI 7874 UNI 7874 (Forged unalloyed or special-alloyed, quenched and tempered or normalized steel flat products) | 25 | chevron_right |
| UNI 7945 UNI 7945 (Plain end seamless precision steel tubes) | 5 | chevron_right |
| UNI 7946 UNI 7946 (Plain end welded precision steel tubes) | 5 | chevron_right |
| UNI 7947 UNI 7947 (Plain end welded and sized precision steel tubes) | 5 | chevron_right |
| UNI 7958 UNI 7958 (Cold rolled flat finished products of unalloyed quality steel. Structural sheets and coils) | 3 | chevron_right |
| UNI 7964 UNI 7964 (Casting aluminium alloys for use in automotive industry) | 5 | chevron_right |
| UNI 7989-1 UNI 7989-1 (Wrought copper alloys, Copper-aluminium alloys, Chemical composition) | 4 | chevron_right |
| UNI 7989-2 UNI 7989-2 (Wrought copper alloys, Copper-aluminium alloys, Mechanical characteristics of semi-finished products) | 4 | chevron_right |
| UNI 8024 UNI 8024 (Casting aluminium alloys, Aluminium- silicon-magnesium-titanium alloy (Si 7%, Mg, Ti)) | 2 | chevron_right |
| UNI 8029 UNI 8029 (Aerospace metallic materials. Special austenitic alloyed stainless steel investment castings (C 0,06; Cr 18; Ni 10,5; Nb 10 C)) | 1 | chevron_right |
| UNI 8077 UNI 8077 (Hot rolled special alloyed steel products, bars and coils, for nitriding. Qualities, requirements and tests) | 4 | chevron_right |
| UNI 8092 UNI 8092 (Cold rolled flat finished products of unalloyed quality steel. Cold drawing or cold bending sheets and coils with thickness < 3 mm for road vehicles) | 3 | chevron_right |
| UNI 8317 UNI 8317 (Corrosion and heat resisting stainless steel plate, sheet, strip and coil) | 38 | chevron_right |
| UNI 8366 UNI 8366 (Cold rolled flat finished products of corrosion and heat resisting stainless steel. Strips for springs) | 4 | chevron_right |
| UNI 8368 UNI 8368 (Cold rolled steel flat products. Tinplate and blackplate in sheet form) | 6 | chevron_right |
| UNI 8373 UNI 8373 (Hot rolled finished products of non-alloy quality steel for heat treatment. Bars and wire rod for mechanical purposes. Qualities, requirements and tests) | 10 | chevron_right |
| UNI 8488 UNI 8488 (Oil and natural gas industries. Steel line pipe) | 2 | chevron_right |
| UNI 8550 UNI 8550 (Special unalloyed and alloyed steel finished products, open die and drop forged, for case hardening. Quality, requirements and tests) | 14 | chevron_right |
| UNI 8551 UNI 8551 (Special unalloyed and alloyed steel finished products, open die and drop forged, quenched and tempered or normalized, suitable for surface hardening. Qualities, requirements and tests) | 10 | chevron_right |
| UNI 8552 UNI 8552 (Special alloyed steel finished products, open die and drop forged, for nitriding. Qualities, requirements and tests) | 4 | chevron_right |
| UNI 8632 UNI 8632 (Cold rolled and coated flat steel products. Blackplate and tinplate in coils for subsequent cutting into sheet form) | 6 | chevron_right |
| UNI 8664 UNI 8664 (Hot rolled unalloyed steel finished products. Wire rod for prestressed concrete tendoms) | 6 | chevron_right |
| UNI 8705 UNI 8705 (Pressure die casting primary magnesium- allumunium-manganese alloy (Al 6% - Mn 0,2%)) | 2 | chevron_right |
| UNI 8706 UNI 8706 (Casting magnesium alloys for use in automotive industry) | 2 | chevron_right |
| UNI 8787 UNI 8787 (Hot rolled finished products of steel for quenching and tempering. Plates sheets, strips, coils and wide flats for mechanical engineering purposes. Qualities, requirements and tests) | 18 | chevron_right |
| UNI 8788 UNI 8788 (Hot rolled finished products of steel for case-hardening and for carbonitriding. Plates, sheets, strips, coils and wide flats for mechanical engineering purposes. Qualities, requirements and tests) | 15 | chevron_right |
| UNI 8845 UNI 8845 (Abrasion resistant white-cast-irons. Qualities, requirements and tests) | 10 | chevron_right |
| UNI 8863 UNI 8863 (Unalloyed steel seamless and welded tubes suitable for screwing in accordance with UNI ISO 7/1) | 1 | chevron_right |
| UNI 8890 UNI 8890 (Cold rolled steel flat products. Plates, sheets and wide flats with high yield strength, intended for cold forming. Quality, Regulations and Testing.) | 9 | chevron_right |
| UNI 8893 UNI 8893 (Hot rolled flat-finished products of special unalloyed and alloyed steel. Strips for springs. Qualities, requirements and tests) | 14 | chevron_right |
| UNI 8913 UNI 8913 (Welded steel tubes in road vehicles) | 7 | chevron_right |
| UNI 9001-1 UNI 9001-1 (Wrought primary aluminium and aluminium alloys, Aluminium group Al 99,0 (1 200)) | 3 | chevron_right |
| UNI 9001-2 UNI 9001-2 (Wrought primary aluminium and aluminium alloys, Aluminium group, Al 99,5 (1050 a)) | 2 | chevron_right |
| UNI 9001-3 UNI 9001-3 (Wrought primary aluminium and aluminium alloys, Aluminium group, Al 99,7 (1070 a)) | 2 | chevron_right |
| UNI 9001-4 UNI 9001-4 (Wrought primary and aluminium alloys, Aluminium group, Al 99,8 (1080 a)) | 3 | chevron_right |
| UNI 9001-6 UNI 9001-6 (Wrought primary aluminium and aluminium alloys) | 2 | chevron_right |
| UNI 9002-1 UNI 9002-1 (Wrought primary aluminium and aluminium alloys, Aluminium-copper alloys, Al Cu 26 Mg 035 alloy (2117)) | 1 | chevron_right |
| UNI 9002-2 UNI 9002-2 (Wrought primary aluminium and aluminium alloys, Aluminium-copper alloys, Al Cu 4 Mg 07 Mn 07 Si 05 alloy (2017 a)) | 2 | chevron_right |
| UNI 9002-3 UNI 9002-3 (Aluminium and aluminum alloys, primary plastic processing, aluminum-copper alloys, alloy Al Cu 4,4 Si 0,8 Mg 0,5 (2014)) | 2 | chevron_right |
| UNI 9002-4 UNI 9002-4 (Alluminio e leghe di alluminio primarie da lavorazione plastica, Leghe alluminio -rame, Lega Al Cu 4,4 Mg 1,5 Mn 0,6 (202 4)) | 1 | chevron_right |
| UNI 9002-5 UNI 9002-5 (Wrought primary aluminium and aluminium alloys, Aluminium-copper alloys, Al Cu 55 Pb 04 Bi 04 alloy (2011)) | 2 | chevron_right |
| UNI 9002-8 UNI 9002-8 (Wrought primary aluminium and aluminium alloys. Aluminium-copper alloys) | 1 | chevron_right |
| UNI 9003-1 UNI 9003-1 (Wrought primary aluminium and aluminium alloys, Aluminium-manganese alloys, Al Mn 12 Cu 012 alloy (3003)) | 2 | chevron_right |
| UNI 9003-2 UNI 9003-2 (Wrought primary aluminium and aluminium alloys, Aluminium-manganese-magnesium alloys, Al Mn 1,2 Mg 1 alloy (3004)) | 2 | chevron_right |
| UNI 9003-3 UNI 9003-3 (Wrought primary aluminium and aluminium alloys, Aluminium manganese alloys, Al Mn 12 alloy (3103)) | 2 | chevron_right |
| UNI 9003-4 UNI 9003-4 (Wrought primary aluminium and aluminium alloys. Aluminium-manganese alloys) | 1 | chevron_right |
| UNI 9003-5 UNI 9003-5 (Wrought primary aluminium and aluminium alloys. Aluminium-manganese alloys) | 1 | chevron_right |
| UNI 9005-1 UNI 9005-1 (Wrought primary aluminium and aluminium alloys, Aluminium-magnesium alloys, Al Mg 0.8 alloy (5005)) | 2 | chevron_right |
| UNI 9005-2 UNI 9005-2 (Wrought primary aluminium and aluminium alloys. Aluminium-magnesium alloys) | 1 | chevron_right |
| UNI 9005-3 UNI 9005-3 (Wrought primary aluminium and aluminium alloys. Aluminium-magnesium alloys) | 1 | chevron_right |
| UNI 9005-4 UNI 9005-4 (Wrought primary aluminium and aluminium alloys. Aluminium-magnesium alloys) | 1 | chevron_right |
| UNI 9005-5 UNI 9005-5 (Wrought primary aluminium and aluminium alloys. Aluminium-magnesium alloys) | 1 | chevron_right |
| UNI 9005-6 UNI 9005-6 (Wrought primary aluminium and aluminium alloys. Aluminium-magnesium alloys) | 1 | chevron_right |
| UNI 9005-7 UNI 9005-7 (Wrought primary aluminium and aluminium alloys) | 1 | chevron_right |
| UNI 9005-8 UNI 9005-8 (Wrought primary aluminium and aluminium alloys. Aluminium-magnesium alloys) | 1 | chevron_right |
| UNI 9006-1 UNI 9006-1 (Wrought primary aluminium and aluminium alloys, Aluminium- magnesium-silicon alloys, Al Mg 0,5 Si 0,4 Fe 0,2 (6060) alloy) | 2 | chevron_right |
| UNI 9006-2 UNI 9006-2 (Wrought primary aluminium and aluminium alloys, Aluminium- magnesium-silicon alloys, Al Mg 1 Si 0,6 Cu 0,28 Cr 0,20 (6061) alloy) | 2 | chevron_right |
| UNI 9006-3 UNI 9006-3 (Wrought primary aluminium and aluminium alloys. Aluminium- magnesium-silicon alloys) | 1 | chevron_right |
| UNI 9006-4 UNI 9006-4 (Wrought primary aluminium and aluminium alloys, Aluminium-magnesium-silicon alloys, Al Si 1 Mg 0,9 Mn 0,7 (6082) alloy) | 2 | chevron_right |
| UNI 9006-5 UNI 9006-5 (Wrought primary aluminium and aluminium alloys. Aluminium- magnesium-silicon alloys) | 1 | chevron_right |
| UNI 9006-6 UNI 9006-6 (Wrought primary aluminium and aluminium alloys. Aluminium- magnesium-silicon alloys) | 1 | chevron_right |
| UNI 9006-7 UNI 9006-7 (Wrought primary aluminium and aluminium alloys. Aluminium- magnesium-silicon alloys) | 1 | chevron_right |
| UNI 9007-1 UNI 9007-1 (Wrought primary aluminium and aluminium alloys. Aluminium-zinc alloys) | 1 | chevron_right |
| UNI 9007-2 UNI 9007-2 (Wrought primary aluminium and aluminium alloys, Aluminium-zinc alloys, Al Zn 5,8 Mg 2,5 Cu 1,6 Cr 0,23 (7075)) | 2 | chevron_right |
| UNI 9007-3 UNI 9007-3 (Wrought primary aluminium and aluminium alloys, Aluminium-zinc alloys, Al Zn 6 Mg 2 Cu 1 Zr 0,12 Mn 0,1 Ti 0,04 alloy (7012)) | 2 | chevron_right |
| UNI 9007-4 UNI 9007-4 (Wrought primary aluminium and aluminium alloys, Aluminium-zinc alloys, Al Zn 6,2 Mg 2,3 Cu 1,8 Zr 0,12 Mn 0, Ti 0,04 (7010 A)) | 2 | chevron_right |
| UNI 9007-6 UNI 9007-6 (Wrought primary aluminium and aluminium alloys. Aluminium-zinc alloys) | 1 | chevron_right |
| UNI 9008-1 UNI 9008-1 (Wrought primary aluminium and aluminium alloys. Aluminium-zinc alloys) | 1 | chevron_right |
| UNI 9008-2 UNI 9008-2 (Wrought primary aluminium and aluminium alloys. Aluminium-zinc alloys) | 1 | chevron_right |
| UNI 9160 UNI 9160 (Hot roller flat finished unalloyed steel products. Cold drawing or cold bending sheets, plates and coils for road vehicles. Qualities, requirements and tests) | 3 | chevron_right |
| UNI 9161 UNI 9161 (Hot rolled flat finished steel products. Sheets plates and coils with high yield strength for road vehicles. Qualities, requirements and tests) | 4 | chevron_right |
| UNI 9222-1 UNI 9222-1 (Wrought copper alloys, Copper-nickel- zinc and copper-nickel-zinc-lead alloys, Chemical composition) | 4 | chevron_right |
| UNI 9222-2 UNI 9222-2 (Wrought copper alloys, Copper-nickel- zinc and copper-nickel-zinc-lead alloys, Mechanical properties) | 4 | chevron_right |
| UNI 9803 UNI 9803 (Aluminium alloys for marine applications, Wrought aluminium-magnesium alloys) | 3 | chevron_right |
| UNI 9956 UNI 9956 (Titanium, Titanium sponge, Definitions, characteristics and tests) | 10 | chevron_right |
| UNI CEN/TS 13388 UNI CEN/TS 13388 (Copper and copper alloys - Compendium of compositions and products) | 802 | chevron_right |
| UNI EN 10001 UNI EN 10001 (Definition and classification of pig-irons) | 13 | chevron_right |
| UNI EN 10016-2 UNI EN 10016-2 (Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod) | 60 | chevron_right |
| UNI EN 10016-3 UNI EN 10016-3 (Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod) | 6 | chevron_right |
| UNI EN 10016-4 UNI EN 10016-4 (Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications) | 68 | chevron_right |
| UNI EN 10025 UNI EN 10025 (Hot rolled products of non-alloy structural steels; technical delivery conditions) | 60 | chevron_right |
| UNI EN 10025-2 UNI EN 10025-2 (Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels) | 58 | chevron_right |
| UNI EN 10025-3 UNI EN 10025-3 (Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels) | 16 | chevron_right |
| UNI EN 10025-4 UNI EN 10025-4 (Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels) | 20 | chevron_right |
| UNI EN 10025-5 UNI EN 10025-5 (Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance) | 38 | chevron_right |
| UNI EN 10025-6 UNI EN 10025-6 (Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition) | 41 | chevron_right |
| UNI EN 10028-2 UNI EN 10028-2 (Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties) | 34 | chevron_right |
| UNI EN 10028-3 UNI EN 10028-3 (Flat products made of steels for pressure purposes - Part 3: weldable fine grain steels, normalized) | 30 | chevron_right |
| UNI EN 10028-4 UNI EN 10028-4 (Flat products made of steels for pressure purposes - Part 4: nickel alloy steels with specified low temperature properties) | 15 | chevron_right |
| UNI EN 10028-5 UNI EN 10028-5 (Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled) | 18 | chevron_right |
| UNI EN 10028-6 UNI EN 10028-6 (Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered) | 32 | chevron_right |
| UNI EN 10028-7 UNI EN 10028-7 (Flat products made of steels for pressure purposes - Part 7: Stainless steels) | 128 | chevron_right |
| UNI EN 10083-1 UNI EN 10083-1 (Quenched and tempered steels - Part 1: Technical delivery conditions for special steels (includes amendment A1:1996)) | 100 | chevron_right |
| UNI EN 10083-2 UNI EN 10083-2 (Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels) | 57 | chevron_right |
| UNI EN 10083-3 UNI EN 10083-3 (Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels) | 56 | chevron_right |
| UNI EN 10084 UNI EN 10084 (Case hardening steels - Technical delivery conditions) | 72 | chevron_right |
| UNI EN 10085 UNI EN 10085 (Nitriding steels - Technical delivery conditions) | 18 | chevron_right |
| UNI EN 10087 UNI EN 10087 (Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods) | 34 | chevron_right |
| UNI EN 10088-1 UNI EN 10088-1 (Stainless steels - Part 1: List of stainless steels) | 433 | chevron_right |
| UNI EN 10088-2 UNI EN 10088-2 (Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes) | 215 | chevron_right |
| UNI EN 10088-3 UNI EN 10088-3 (Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes) | 227 | chevron_right |
| UNI EN 10088-4 UNI EN 10088-4 (Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes) | 86 | chevron_right |
| UNI EN 10088-5 UNI EN 10088-5 (Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes) | 84 | chevron_right |
| UNI EN 10089 UNI EN 10089 (Hot-rolled steels for quenched and tempered springs - Technical delivery conditions) | 38 | chevron_right |
| UNI EN 10090 UNI EN 10090 (Valve steels and alloys for internal combustion engines) | 20 | chevron_right |
| UNI EN 10095 UNI EN 10095 (Heat resisting steels and nickel alloys) | 53 | chevron_right |
| UNI EN 10106 UNI EN 10106 (Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state) | 70 | chevron_right |
| UNI EN 10107 UNI EN 10107 (Grain-oriented electrical steel sheet and strip delivered in the fully processed state) | 98 | chevron_right |
| UNI EN 10111 UNI EN 10111 (Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions) | 8 | chevron_right |
| UNI EN 10113-2 UNI EN 10113-2 (Hot-rolled products in weldable fine grain structural steels - Part 2: delivery conditions for normalized rolled steels) | 16 | chevron_right |
| UNI EN 10113-3 UNI EN 10113-3 (Hot-rolled products in weldable fine grain structural steels - Part 3: delivery conditions for thermomechanically rolled steels) | 16 | chevron_right |
| UNI EN 10120 UNI EN 10120 (Steel sheet and strip for welded gas cylinders) | 10 | chevron_right |
| UNI EN 10126 UNI EN 10126 (Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state) | 12 | chevron_right |
| UNI EN 10130 UNI EN 10130 (Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions) | 17 | chevron_right |
| UNI EN 10132 UNI EN 10132 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions) | 74 | chevron_right |
| UNI EN 10132-2 UNI EN 10132-2 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels) | 8 | chevron_right |
| UNI EN 10132-3 UNI EN 10132-3 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering) | 24 | chevron_right |
| UNI EN 10132-4 UNI EN 10132-4 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4: Spring steels and other applications) | 30 | chevron_right |
| UNI EN 10137-2 UNI EN 10137-2 (Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels) | 40 | chevron_right |
| UNI EN 10137-3 UNI EN 10137-3 (Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels) | 16 | chevron_right |
| UNI EN 10139 UNI EN 10139 (Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions) | 12 | chevron_right |
| UNI EN 10142 UNI EN 10142 (Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions) | 38 | chevron_right |
| UNI EN 10147 UNI EN 10147 (Continuously hot-dip zinc coated structural steels strip and sheet - Technical delivery conditions) | 46 | chevron_right |
| UNI EN 10149-2 UNI EN 10149-2 (Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels) | 22 | chevron_right |
| UNI EN 10149-3 UNI EN 10149-3 (Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels) | 8 | chevron_right |
| UNI EN 10151 UNI EN 10151 (Stainless steel strip for springs - Technical delivery conditions) | 20 | chevron_right |
| UNI EN 10152 UNI EN 10152 (Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions) | 16 | chevron_right |
| UNI EN 10154 UNI EN 10154 (Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions) | 20 | chevron_right |
| UNI EN 10155 UNI EN 10155 (Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions) | 18 | chevron_right |
| UNI EN 10165 UNI EN 10165 (Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state) | 16 | chevron_right |
| UNI EN 10169-1 UNI EN 10169-1 (Continuously organic coated (coil coated) steel flat products - Part 1: general information (definitions, materials, tolerances, test methods)) | 15 | chevron_right |
| UNI EN 10202 UNI EN 10202 (Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel) | 48 | chevron_right |
| UNI EN 10203 UNI EN 10203 (Cold reduced electrolytic tinplate) | 8 | chevron_right |
| UNI EN 10205 UNI EN 10205 (Cold reduced tinmill products - Blackplate) | 51 | chevron_right |
| UNI EN 10207 UNI EN 10207 (Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars) | 9 | chevron_right |
| UNI EN 10208-1 UNI EN 10208-1 (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A) | 10 | chevron_right |
| UNI EN 10208-2 UNI EN 10208-2 (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B) | 32 | chevron_right |
| UNI EN 10209 UNI EN 10209 (Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions) | 22 | chevron_right |
| UNI EN 10210-1 UNI EN 10210-1 (Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 28 | chevron_right |
| UNI EN 10210-3 UNI EN 10210-3 (Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels) | 96 | chevron_right |
| UNI EN 10213 UNI EN 10213 (Steel castings for pressure purposes) | 66 | chevron_right |
| UNI EN 10213-2 UNI EN 10213-2 (Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures) | 26 | chevron_right |
| UNI EN 10213-3 UNI EN 10213-3 (Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures) | 14 | chevron_right |
| UNI EN 10213-4 UNI EN 10213-4 (Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades) | 20 | chevron_right |
| UNI EN 10214 UNI EN 10214 (Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions) | 26 | chevron_right |
| UNI EN 10215 UNI EN 10215 (Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions) | 21 | chevron_right |
| UNI EN 10216-1 UNI EN 10216-1 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties) | 12 | chevron_right |
| UNI EN 10216-2 UNI EN 10216-2 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties) | 58 | chevron_right |
| UNI EN 10216-3 UNI EN 10216-3 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes) | 34 | chevron_right |
| UNI EN 10216-4 UNI EN 10216-4 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties) | 18 | chevron_right |
| UNI EN 10216-5 UNI EN 10216-5 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes) | 80 | chevron_right |
| UNI EN 10217-1 UNI EN 10217-1 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties) | 12 | chevron_right |
| UNI EN 10217-2 UNI EN 10217-2 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties) | 8 | chevron_right |
| UNI EN 10217-3 UNI EN 10217-3 (Welded steel tubes for pressure purposes - Technical delivery conditions -Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties) | 20 | chevron_right |
| UNI EN 10217-4 UNI EN 10217-4 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties) | 4 | chevron_right |
| UNI EN 10217-5 UNI EN 10217-5 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties) | 6 | chevron_right |
| UNI EN 10217-6 UNI EN 10217-6 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties) | 4 | chevron_right |
| UNI EN 10217-7 UNI EN 10217-7 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes) | 46 | chevron_right |
| UNI EN 10219-1 UNI EN 10219-1 (Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 40 | chevron_right |
| UNI EN 10219-3 UNI EN 10219-3 (Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels) | 88 | chevron_right |
| UNI EN 10222-2 UNI EN 10222-2 (Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties) | 34 | chevron_right |
| UNI EN 10222-3 UNI EN 10222-3 (Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties) | 10 | chevron_right |
| UNI EN 10222-4 UNI EN 10222-4 (Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength) | 26 | chevron_right |
| UNI EN 10222-5 UNI EN 10222-5 (Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels) | 60 | chevron_right |
| UNI EN 10224 UNI EN 10224 (Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions) | 6 | chevron_right |
| UNI EN 10225 UNI EN 10225 (Weldable structural steels for fixed offshore structures - Technical delivery conditions) | 96 | chevron_right |
| UNI EN 10225-1 UNI EN 10225-1 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates) | 22 | chevron_right |
| UNI EN 10225-2 UNI EN 10225-2 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 2: Sections) | 18 | chevron_right |
| UNI EN 10225-3 UNI EN 10225-3 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 3: Hot finished hollow sections) | 24 | chevron_right |
| UNI EN 10225-4 UNI EN 10225-4 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections) | 18 | chevron_right |
| UNI EN 10248-1 UNI EN 10248-1 (Hot-rolled steel sheet piles - Part 1: Technical delivery conditions) | 16 | chevron_right |
| UNI EN 10249-1 UNI EN 10249-1 (Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions) | 6 | chevron_right |
| UNI EN 10250-2 UNI EN 10250-2 (Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels) | 47 | chevron_right |
| UNI EN 10250-3 UNI EN 10250-3 (Open die steel forgings for general engineering purposes - Part 3: Alloy special steels) | 42 | chevron_right |
| UNI EN 10250-4 UNI EN 10250-4 (Open die steel forgings for general engineering purposes - Part 4: Stainless steels) | 70 | chevron_right |
| UNI EN 10253-1 UNI EN 10253-1 (Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements) | 2 | chevron_right |
| UNI EN 10253-2 UNI EN 10253-2 (Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements) | 64 | chevron_right |
| UNI EN 10253-3 UNI EN 10253-3 (Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements) | 50 | chevron_right |
| UNI EN 10253-4 UNI EN 10253-4 (Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements) | 50 | chevron_right |
| UNI EN 10255 UNI EN 10255 (Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions) | 2 | chevron_right |
| UNI EN 10263-2 UNI EN 10263-2 (Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working) | 18 | chevron_right |
| UNI EN 10263-3 UNI EN 10263-3 (Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels) | 50 | chevron_right |
| UNI EN 10263-4 UNI EN 10263-4 (Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering) | 72 | chevron_right |
| UNI EN 10263-5 UNI EN 10263-5 (Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels) | 38 | chevron_right |
| UNI EN 10264-4 UNI EN 10264-4 (Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire) | 10 | chevron_right |
| UNI EN 10265 UNI EN 10265 (Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation) | 32 | chevron_right |
| UNI EN 10267 UNI EN 10267 (Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures) | 20 | chevron_right |
| UNI EN 10268 UNI EN 10268 (Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions) | 47 | chevron_right |
| UNI EN 10269 UNI EN 10269 (Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties) | 88 | chevron_right |
| UNI EN 10270-1 UNI EN 10270-1 (Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire) | 5 | chevron_right |
| UNI EN 10270-2 UNI EN 10270-2 (Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire) | 12 | chevron_right |
| UNI EN 10270-3 UNI EN 10270-3 (Steel wire for mechanical springs - Part 3: Stainless spring steel wire) | 12 | chevron_right |
| UNI EN 10271 UNI EN 10271 (Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions) | 15 | chevron_right |
| UNI EN 10272 UNI EN 10272 (Stainless steel bars for pressure purposes) | 70 | chevron_right |
| UNI EN 10273 UNI EN 10273 (Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties) | 32 | chevron_right |
| UNI EN 10277 UNI EN 10277 (Bright steel products - Technical delivery conditions) | 169 | chevron_right |
| UNI EN 10277-2 UNI EN 10277-2 (Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes) | 29 | chevron_right |
| UNI EN 10277-3 UNI EN 10277-3 (Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels) | 34 | chevron_right |
| UNI EN 10277-4 UNI EN 10277-4 (Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels) | 20 | chevron_right |
| UNI EN 10277-5 UNI EN 10277-5 (Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering) | 34 | chevron_right |
| UNI EN 10283 UNI EN 10283 (Corrosion resistant steel castings) | 61 | chevron_right |
| UNI EN 10292 UNI EN 10292 (Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions) | 197 | chevron_right |
| UNI EN 10293 UNI EN 10293 (Steel castings for general engineering uses) | 66 | chevron_right |
| UNI EN 10294-1 UNI EN 10294-1 (Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels) | 10 | chevron_right |
| UNI EN 10294-2 UNI EN 10294-2 (Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties) | 20 | chevron_right |
| UNI EN 10295 UNI EN 10295 (Heat resistant steel castings) | 58 | chevron_right |
| UNI EN 10296-1 UNI EN 10296-1 (Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes) | 34 | chevron_right |
| UNI EN 10296-2 UNI EN 10296-2 (Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel) | 66 | chevron_right |
| UNI EN 10297-1 UNI EN 10297-1 (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes) | 62 | chevron_right |
| UNI EN 10297-2 UNI EN 10297-2 (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel) | 84 | chevron_right |
| UNI EN 10302 UNI EN 10302 (Creep resisting steels, nickel and cobalt alloys) | 70 | chevron_right |
| UNI EN 10303 UNI EN 10303 (Thin magnetic steel sheet and strip for use at medium frequencies) | 18 | chevron_right |
| UNI EN 10304 UNI EN 10304 (Magnetic materials (iron and steel) for use in relays) | 5 | chevron_right |
| UNI EN 10305-1 UNI EN 10305-1 (Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes) | 30 | chevron_right |
| UNI EN 10305-2 UNI EN 10305-2 (Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes) | 10 | chevron_right |
| UNI EN 10305-3 UNI EN 10305-3 (Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes) | 50 | chevron_right |
| UNI EN 10305-4 UNI EN 10305-4 (Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems) | 6 | chevron_right |
| UNI EN 10305-5 UNI EN 10305-5 (Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes) | 32 | chevron_right |
| UNI EN 10305-6 UNI EN 10305-6 (Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems) | 10 | chevron_right |
| UNI EN 10323 UNI EN 10323 (Steel wire and wire products - Bead wire) | 5 | chevron_right |
| UNI EN 10324 UNI EN 10324 (Steel wire and wire products - Hose reinforcement wire) | 3 | chevron_right |
| UNI EN 10326 UNI EN 10326 (Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions) | 56 | chevron_right |
| UNI EN 10327 UNI EN 10327 (Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions) | 84 | chevron_right |
| UNI EN 10331 UNI EN 10331 (Magnetic materials - Specification for sintered soft magnetic materials) | 14 | chevron_right |
| UNI EN 10336 UNI EN 10336 (Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming) | 50 | chevron_right |
| UNI EN 10338 UNI EN 10338 (Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions) | 73 | chevron_right |
| UNI EN 10340 UNI EN 10340 (Steel castings for structural uses) | 24 | chevron_right |
| UNI EN 10341 UNI EN 10341 (Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state) | 28 | chevron_right |
| UNI EN 10343 UNI EN 10343 (Steels for quenching and tempering for construction purposes - Technical delivery conditions) | 26 | chevron_right |
| UNI EN 10346 UNI EN 10346 (Continuously hot-dip coated steel flat products - Technical delivery conditions) | 485 | chevron_right |
| UNI EN 10349 UNI EN 10349 (Steel castings - Austenitic manganese steel castings) | 18 | chevron_right |
| UNI EN 10378 UNI EN 10378 (Welded stainless steel square and rectangular tubes for mechanical and structural engineering and decorative use - Technical delivery conditions) | 46 | chevron_right |
| UNI EN 1044 UNI EN 1044 (Brazing - Filler metals) | 184 | chevron_right |
| UNI EN 1057 UNI EN 1057 (Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications) | 2 | chevron_right |
| UNI EN 1094-2 UNI EN 1094-2 (Insulating refractory products - Part 2: Classification of shaped products (ISO 2245:1990 modified)) | 24 | chevron_right |
| UNI EN 1172 UNI EN 1172 (Copper and copper alloys - Sheet and strip for building purposes) | 12 | chevron_right |
| UNI EN 1179 UNI EN 1179 (Zinc an zinc alloys - Primary zinc) | 5 | chevron_right |
| UNI EN 12070 UNI EN 12070 (Welding consumables - Wire electrodes, wires and rods for arc welding of creep-resisting steels) | 63 | chevron_right |
| UNI EN 12071 UNI EN 12071 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels) | 8 | chevron_right |
| UNI EN 12072 UNI EN 12072 (Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels) | 39 | chevron_right |
| UNI EN 12163 UNI EN 12163 (Copper and copper alloys - Rod for general purposes) | 110 | chevron_right |
| UNI EN 12164 UNI EN 12164 (Copper and copper alloys - Rod for free machining purposes) | 90 | chevron_right |
| UNI EN 12165 UNI EN 12165 (Copper and copper alloys - Wrought and unwrought forging stock) | 126 | chevron_right |
| UNI EN 12166 UNI EN 12166 (Copper and copper alloys - Wire for general purposes) | 104 | chevron_right |
| UNI EN 12167 UNI EN 12167 (Copper and copper alloys - Profiles and bars for general purposes) | 142 | chevron_right |
| UNI EN 12168 UNI EN 12168 (Copper and copper alloys - Hollow rod for free machining purposes) | 64 | chevron_right |
| UNI EN 12369-1 UNI EN 12369-1 (Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards) | 11 | chevron_right |
| UNI EN 12369-3 UNI EN 12369-3 (Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels) | 3 | chevron_right |
| UNI EN 12392 UNI EN 12392 (Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment) | 94 | chevron_right |
| UNI EN 12420 UNI EN 12420 (Copper and copper alloys - Forgings) | 126 | chevron_right |
| UNI EN 12421 UNI EN 12421 (Magnesium and magnesium alloys - Unalloyed magnesium) | 23 | chevron_right |
| UNI EN 12438 UNI EN 12438 (Magnesium and magnesium alloys - Magnesium alloys for cast anodes) | 30 | chevron_right |
| UNI EN 12449 UNI EN 12449 (Copper and copper alloys - Seamless, round tubes for general purposes) | 94 | chevron_right |
| UNI EN 12450 UNI EN 12450 (Copper and copper alloys - Seamless, round copper capillary tubes) | 2 | chevron_right |
| UNI EN 12451 UNI EN 12451 (Copper and copper alloys - Seamless, round tubes for heat exchangers) | 16 | chevron_right |
| UNI EN 12452 UNI EN 12452 (Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers) | 10 | chevron_right |
| UNI EN 12475-1 UNI EN 12475-1 (Classification of dense shaped refractory products - Part 1: Alumina-silica products) | 13 | chevron_right |
| UNI EN 12475-2 UNI EN 12475-2 (Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon) | 31 | chevron_right |
| UNI EN 12475-3 UNI EN 12475-3 (Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 30% residual carbon) | 55 | chevron_right |
| UNI EN 12475-4 UNI EN 12475-4 (Classification of dense shaped refractory products - Part 4: Special products) | 80 | chevron_right |
| UNI EN 12476 UNI EN 12476 (Phosphate conversion coatings of metals - Method of specifying requirements) | 4 | chevron_right |
| UNI EN 12496 UNI EN 12496 (Galvanic anodes for cathodic protection in seawater and saline mud) | 10 | chevron_right |
| UNI EN 12513 UNI EN 12513 (Founding - Abrasion resistant cast irons) | 38 | chevron_right |
| UNI EN 12516-4 UNI EN 12516-4 (Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel) | 78 | chevron_right |
| UNI EN 12535 UNI EN 12535 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels) | 11 | chevron_right |
| UNI EN 12536 UNI EN 12536 (Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification) | 6 | chevron_right |
| UNI EN 12548 UNI EN 12548 (Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves) | 32 | chevron_right |
| UNI EN 12588 UNI EN 12588 (Lead and lead alloys - Rolled lead sheet for building purposes) | 1 | chevron_right |
| UNI EN 12659 UNI EN 12659 (Lead and lead alloys - Lead) | 8 | chevron_right |
| UNI EN 12735-1 UNI EN 12735-1 (Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems) | 4 | chevron_right |
| UNI EN 12735-2 UNI EN 12735-2 (Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment) | 2 | chevron_right |
| UNI EN 12765 UNI EN 12765 (Classification of thermosetting wood adhesive for non-structural applications) | 4 | chevron_right |
| UNI EN 12844 UNI EN 12844 (Zinc and zinc alloys - Castings - Specifications) | 16 | chevron_right |
| UNI EN 12861 UNI EN 12861 (Copper and copper alloys - Scrap) | 83 | chevron_right |
| UNI EN 12952-2 UNI EN 12952-2 (Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories) | 114 | chevron_right |
| UNI EN 12953-2 UNI EN 12953-2 (Shell boilers - Part 2: Materials for pressure parts of boilers and accessories) | 29 | chevron_right |
| UNI EN 1301-2 UNI EN 1301-2 (Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties) | 45 | chevron_right |
| UNI EN 13148 UNI EN 13148 (Copper and copper alloys - Hot-dip tinned strip) | 56 | chevron_right |
| UNI EN 13195 UNI EN 13195 (Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)) | 48 | chevron_right |
| UNI EN 13195-1 UNI EN 13195-1 (Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications) | 20 | chevron_right |
| UNI EN 13261 UNI EN 13261 (Railway applications - Wheelsets and bogies - Axles - Product requirements) | 3 | chevron_right |
| UNI EN 13262 UNI EN 13262 (Railway applications - Wheelsets and bogies - Wheels - Product requirements) | 5 | chevron_right |
| UNI EN 13283 UNI EN 13283 (Zinc and zinc alloys - Secondary zinc) | 3 | chevron_right |
| UNI EN 13347 UNI EN 13347 (Copper and copper alloys - Rod and wire for welding and braze welding) | 58 | chevron_right |
| UNI EN 13348 UNI EN 13348 (Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum) | 2 | chevron_right |
| UNI EN 13353 UNI EN 13353 (Solid wood panels (SWP) - Requirements) | 9 | chevron_right |
| UNI EN 13445-2 UNI EN 13445-2 (Unfired pressure vessels - Part 2: Materials) | 408 | chevron_right |
| UNI EN 13445-6 UNI EN 13445-6 (Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron) | 20 | chevron_right |
| UNI EN 13445-8 UNI EN 13445-8 (Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys) | 34 | chevron_right |
| UNI EN 13480-2 UNI EN 13480-2 (Metallic industrial piping - Part 2: Materials) | 406 | chevron_right |
| UNI EN 13599 UNI EN 13599 (Copper and copper alloys - Copper plate, sheet and strip for electrical purposes) | 16 | chevron_right |
| UNI EN 13600 UNI EN 13600 (Copper and copper alloys - Seamless copper tubes for electrical purposes) | 20 | chevron_right |
| UNI EN 13601 UNI EN 13601 (Copper and copper alloys - Copper rod, bar and wire for general electrical purposes) | 32 | chevron_right |
| UNI EN 13602 UNI EN 13602 (Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors) | 10 | chevron_right |
| UNI EN 13604 UNI EN 13604 (Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper) | 4 | chevron_right |
| UNI EN 13605 UNI EN 13605 (Copper and copper alloys - Copper profiles and profiled wire for electrical purposes) | 36 | chevron_right |
| UNI EN 13674-1 UNI EN 13674-1 (Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above) | 18 | chevron_right |
| UNI EN 13674-2 UNI EN 13674-2 (Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above) | 18 | chevron_right |
| UNI EN 13674-3 UNI EN 13674-3 (Railway applications - Track - Rail - Part 3: Check rails) | 6 | chevron_right |
| UNI EN 13674-4 UNI EN 13674-4 (Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m) | 15 | chevron_right |
| UNI EN 13835 UNI EN 13835 (Founding - Austenitic cast irons) | 36 | chevron_right |
| UNI EN 1386 UNI EN 1386 (Aluminium and aluminium alloys - Tread plate - Specifications) | 22 | chevron_right |
| UNI EN 1396 UNI EN 1396 (Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications) | 62 | chevron_right |
| UNI EN 13981-1 UNI EN 13981-1 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products) | 20 | chevron_right |
| UNI EN 13981-2 UNI EN 13981-2 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets) | 10 | chevron_right |
| UNI EN 13981-3 UNI EN 13981-3 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings) | 17 | chevron_right |
| UNI EN 13981-4 UNI EN 13981-4 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings) | 8 | chevron_right |
| UNI EN 14121 UNI EN 14121 (Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications) | 9 | chevron_right |
| UNI EN 14286 UNI EN 14286 (Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods) | 18 | chevron_right |
| UNI EN 14436 UNI EN 14436 (Copper and copper alloys - Electrolytically tinned strip) | 54 | chevron_right |
| UNI EN 14700 UNI EN 14700 (Welding consumables - Welding consumables for hard-facing) | 30 | chevron_right |
| UNI EN 1561 UNI EN 1561 (Founding - Grey cast irons) | 41 | chevron_right |
| UNI EN 1562 UNI EN 1562 (Founding - Malleable cast irons) | 42 | chevron_right |
| UNI EN 1563 UNI EN 1563 (Founding - Spheroidal graphite cast irons) | 93 | chevron_right |
| UNI EN 1564 UNI EN 1564 (Founding - Ausferritic spheroidal graphite cast irons) | 33 | chevron_right |
| UNI EN 15776 UNI EN 15776 (Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%) | 33 | chevron_right |
| UNI EN 1592-2 UNI EN 1592-2 (Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties) | 24 | chevron_right |
| UNI EN 1599 UNI EN 1599 (Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels) | 12 | chevron_right |
| UNI EN 1600 UNI EN 1600 (Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels) | 34 | chevron_right |
| UNI EN 16079 UNI EN 16079 (Founding - Compacted (vermicular) graphite cast irons) | 15 | chevron_right |
| UNI EN 16124 UNI EN 16124 (Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications) | 18 | chevron_right |
| UNI EN 16482 UNI EN 16482 (Founding - Continuous cast iron bars) | 62 | chevron_right |
| UNI EN 1652 UNI EN 1652 (Copper and copper alloys - Plate, sheet, strip and circles for general purposes) | 84 | chevron_right |
| UNI EN 1653 UNI EN 1653 (Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units) | 24 | chevron_right |
| UNI EN 1654 UNI EN 1654 (Copper and copper alloys - Strip for springs and connectors) | 40 | chevron_right |
| UNI EN 1668 UNI EN 1668 (Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels) | 8 | chevron_right |
| UNI EN 1676 UNI EN 1676 (Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications) | 101 | chevron_right |
| UNI EN 16914 UNI EN 16914 (Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions) | 2 | chevron_right |
| UNI EN 1706 UNI EN 1706 (Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties) | 103 | chevron_right |
| UNI EN 1715-2 UNI EN 1715-2 (Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications) | 18 | chevron_right |
| UNI EN 1715-3 UNI EN 1715-3 (Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)) | 49 | chevron_right |
| UNI EN 1715-4 UNI EN 1715-4 (Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications) | 20 | chevron_right |
| UNI EN 1753 UNI EN 1753 (Magnesium and magnesium alloys - Magnesium alloy ingots and castings) | 158 | chevron_right |
| UNI EN 1758 UNI EN 1758 (Copper and copper alloys - Strip for lead frames) | 6 | chevron_right |
| UNI EN 1774 UNI EN 1774 (Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid) | 8 | chevron_right |
| UNI EN 197-1 UNI EN 197-1 (Cement - Part 1: Composition, specifications and conformity criteria for common cements) | 162 | chevron_right |
| UNI EN 1976 UNI EN 1976 (Copper and copper alloys - Cast unwrought copper products) | 44 | chevron_right |
| UNI EN 1977 UNI EN 1977 (Copper and copper alloys - Copper drawing stock (wire rod)) | 36 | chevron_right |
| UNI EN 1978 UNI EN 1978 (Copper and copper alloys - Copper cathodes) | 4 | chevron_right |
| UNI EN 1981 UNI EN 1981 (Copper and copper alloys - Master alloys) | 78 | chevron_right |
| UNI EN 1982 UNI EN 1982 (Copper and copper alloys - Ingots and castings) | 206 | chevron_right |
| UNI EN 2030 UNI EN 2030 (Aerospace series-Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De ≤ 150 mm) | 2 | chevron_right |
| UNI EN 2031 UNI EN 2031 (Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars) | 2 | chevron_right |
| UNI EN 204 UNI EN 204 (Classification of thermoplastic wood adhesives for non-structural applications) | 4 | chevron_right |
| UNI EN 2072 UNI EN 2072 (Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2085 UNI EN 2085 (Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| UNI EN 2086 UNI EN 2086 (Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a ≤ 150 mm) | 1 | chevron_right |
| UNI EN 2087 UNI EN 2087 (Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheets and strips 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2088 UNI EN 2088 (Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2089 UNI EN 2089 (Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 20898-1 UNI EN 20898-1 (Mechanical properties of fasteners - Part 1: Bolts, screws and studs) | 10 | chevron_right |
| UNI EN 20898-2 UNI EN 20898-2 (Mechanical properties of fasteners - Part 2: Nuts with specified proof load values) | 8 | chevron_right |
| UNI EN 20898-6 UNI EN 20898-6 (Mechanical properties of fasteners - Part 6: Nuts with specified proof load values) | 7 | chevron_right |
| UNI EN 2090 UNI EN 2090 (Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2092 UNI EN 2092 (Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2093 UNI EN 2093 (Aerospace series - Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| UNI EN 2094 UNI EN 2094 (Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgings 3 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| UNI EN 2100 UNI EN 2100 (Aerospace series - Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D ≤ 200 mm) | 1 | chevron_right |
| UNI EN 2104 UNI EN 2104 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD) | 1 | chevron_right |
| UNI EN 2114 UNI EN 2114 (Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D ≤ 10 mm) | 1 | chevron_right |
| UNI EN 2115 UNI EN 2115 (Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D ≤ 10 mm No) | 1 | chevron_right |
| UNI EN 2116 UNI EN 2116 (Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D ≤ 10 mm No) | 1 | chevron_right |
| UNI EN 2117 UNI EN 2117 (Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D ≤ 10 mm) | 1 | chevron_right |
| UNI EN 2119 UNI EN 2119 (Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa) | 2 | chevron_right |
| UNI EN 2125 UNI EN 2125 (Aerospace series - Aluminium alloy Al-P16-T6151 - Plates - 6 mm < a ≤ 120 mm) | 1 | chevron_right |
| UNI EN 2126 UNI EN 2126 (Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| UNI EN 2127 UNI EN 2127 (Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D ≤ 100 mm) | 1 | chevron_right |
| UNI EN 2128 UNI EN 2128 (Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm ≤ a or D ≤ 75 mm) | 1 | chevron_right |
| UNI EN 2135 UNI EN 2135 (Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De ≤ 40 mm) | 1 | chevron_right |
| UNI EN 2137 UNI EN 2137 (Aerospace series - Steel FE-PL75 - 1 100 MPa ≤ Rm ≤ 1 250 MPa - Bars - De ≤ 100 mm) | 1 | chevron_right |
| UNI EN 2174 UNI EN 2174 (Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De ≤ 100 mm - Rm ≥ 850 MPa) | 2 | chevron_right |
| UNI EN 2205 UNI EN 2205 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| UNI EN 2206 UNI EN 2206 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa ≤ Rm ≤ 850 MPa - Bars - De ≤ 150 mm) | 2 | chevron_right |
| UNI EN 2209 UNI EN 2209 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheets, strips and plates - 0,5 mm ≤ a ≤ 20 mm) | 2 | chevron_right |
| UNI EN 2213 UNI EN 2213 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa) | 3 | chevron_right |
| UNI EN 2221 UNI EN 2221 (Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm ≤ a ≤ 55 mm) | 1 | chevron_right |
| UNI EN 2222 UNI EN 2222 (Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings) | 1 | chevron_right |
| UNI EN 2226 UNI EN 2226 (Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De ≤ 150 mm) | 2 | chevron_right |
| UNI EN 2252 UNI EN 2252 (Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa) | 3 | chevron_right |
| UNI EN 2256 UNI EN 2256 (Aerospace series - Aluminium alloy AL-P2618A - T852 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| UNI EN 2259 UNI EN 2259 (Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD) | 1 | chevron_right |
| UNI EN 2260 UNI EN 2260 (Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD) | 1 | chevron_right |
| UNI EN 2261 UNI EN 2261 (Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD) | 1 | chevron_right |
| UNI EN 2262 UNI EN 2262 (Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD) | 1 | chevron_right |
| UNI EN 2278 UNI EN 2278 (Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 150 mm) | 2 | chevron_right |
| UNI EN 2279 UNI EN 2279 (Aerospace series - Steel FE-PM37 - 900 MPa < Rm < 1 100 MPa - Forgings - De < 150 mm) | 1 | chevron_right |
| UNI EN 2280 UNI EN 2280 (Aerospace series - Steel FE-PM37 - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheet - a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2302 UNI EN 2302 (Aerospace series - Heat-resisting nickel base alloy NiCr20Co3Fe3 - Rm ≥ 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm) | 1 | chevron_right |
| UNI EN 2306 UNI EN 2306 (Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars) | 1 | chevron_right |
| UNI EN 2318 UNI EN 2318 (Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm) | 1 | chevron_right |
| UNI EN 2319 UNI EN 2319 (Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a < 75 mm) | 1 | chevron_right |
| UNI EN 2320 UNI EN 2320 (Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a ≤ 75 mm) | 1 | chevron_right |
| UNI EN 2321 UNI EN 2321 (Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a ≤ 150 m) | 1 | chevron_right |
| UNI EN 2326 UNI EN 2326 (Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm) | 1 | chevron_right |
| UNI EN 2381 UNI EN 2381 (Aerospace series - Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| UNI EN 2384 UNI EN 2384 (Aerospace series - Aluminium alloy AL-P2014A T6511 - Extruded bars and sections a or D ≤ 150 mm) | 1 | chevron_right |
| UNI EN 2385 UNI EN 2385 (Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm) | 1 | chevron_right |
| UNI EN 2387 UNI EN 2387 (Aerospace series - Aluminium alloy 2014A - T6 - Tubes for structures - 0,6 mm < a < 12,5 mm) | 1 | chevron_right |
| UNI EN 2390 UNI EN 2390 (Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0.6 mm ≤ a ≤ 12.5 mm) | 1 | chevron_right |
| UNI EN 2395 UNI EN 2395 (Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2398 UNI EN 2398 (Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for machined bolts - D ≤ 25 mm) | 2 | chevron_right |
| UNI EN 2399 UNI EN 2399 (Aerospace series. Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for forged bolts. D ≤ 25 mm) | 2 | chevron_right |
| UNI EN 2400 UNI EN 2400 (Aerospace series - Heat resisting nickel base alloy NI-P96-HT - Cold drawn and precipitation treated - Wire - D ≤ 10 mm) | 1 | chevron_right |
| UNI EN 2402 UNI EN 2402 (Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D ≤ 10 mm) | 1 | chevron_right |
| UNI EN 2422 UNI EN 2422 (Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm < a ≤ 120 mm) | 1 | chevron_right |
| UNI EN 2428 UNI EN 2428 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD) | 1 | chevron_right |
| UNI EN 2429 UNI EN 2429 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD) | 1 | chevron_right |
| UNI EN 2430 UNI EN 2430 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD) | 1 | chevron_right |
| UNI EN 2431 UNI EN 2431 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD) | 1 | chevron_right |
| UNI EN 2432 UNI EN 2432 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD) | 1 | chevron_right |
| UNI EN 2438 UNI EN 2438 (Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| UNI EN 2439 UNI EN 2439 (Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Forgings - De ≤ 40 mm) | 2 | chevron_right |
| UNI EN 2446 UNI EN 2446 (Aerospace series - Steel FE-PL1503 (35CrMo4) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 25 mm) | 2 | chevron_right |
| UNI EN 2448 UNI EN 2448 (Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| UNI EN 2450 UNI EN 2450 (Aerospace series - Steel 31NiMoCr10-5-3 1230 MPa ≤ Rm ≤ 1420 MPa - Bars - De ≤ 40 mm) | 1 | chevron_right |
| UNI EN 2451 UNI EN 2451 (Aerospace series - Steel 31NiMoCr10 - 5 - 3 - 1230 MPa ≤ Rm ≤ 1420 MPa - Forgings - De ≤ 40 mm) | 1 | chevron_right |
| UNI EN 2460 UNI EN 2460 (Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Bars - De ≤ 70 mm) | 2 | chevron_right |
| UNI EN 2461 UNI EN 2461 (Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Forgings - De ≤ 70 mm) | 2 | chevron_right |
| UNI EN 2465 UNI EN 2465 (Aerospace series - Steel X2CrNi18-9 - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bar for machining - 4 mm ≤ De ≤ 100 mm) | 2 | chevron_right |
| UNI EN 2466 UNI EN 2466 (Aerospace series - Steel FE-PA3901 (X2CrNi19-11) - Softened - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| UNI EN 2467 UNI EN 2467 (Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa) | 3 | chevron_right |
| UNI EN 2468 UNI EN 2468 (Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm ≤ a ≤ 5 mm) | 1 | chevron_right |
| UNI EN 2469 UNI EN 2469 (Aerospace series. Steel FE-PA3901 (X1CrNi18-10). Air melted. Softened. Wires. 0,4 mm ≤ D ≤ 12,5 mm. 450 MPa ≤ Rm ≤ 650 MPa) | 2 | chevron_right |
| UNI EN 2470 UNI EN 2470 (Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm ≤ D ≤ 10 mm) | 1 | chevron_right |
| UNI EN 2475 UNI EN 2475 (Aerospace series - Steel 30CrNiMo8 (1.6580) - Air melted - Hardened and tempered - Bar for machining - De ≤ 100 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| UNI EN 2476 UNI EN 2476 (Aerospace series - Steel 30CrNiMo8 (1.6580) - 1100 MPa ≤ Rm ≤ 1300 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| UNI EN 2478 UNI EN 2478 (Aerospace series - Steel FE-PL2107 (30NiCrMo16) - 1 220 MPa ≤ Rm ≤ 1 370 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| UNI EN 2480 UNI EN 2480 (Aerospace series - Steel 36NiCrMo16 (1.6773) - 1250 MPa ≤ Rm ≤ 1400 MPa - Bars - De ≤ 75 mm) | 2 | chevron_right |
| UNI EN 2481 UNI EN 2481 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Forgings - De ≤ 75 mm) | 2 | chevron_right |
| UNI EN 2482 UNI EN 2482 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 100 mm) | 2 | chevron_right |
| UNI EN 2483 UNI EN 2483 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| UNI EN 2486 UNI EN 2486 (Aerospace series - Aluminium alloy AL-P2618A - Forging stock) | 1 | chevron_right |
| UNI EN 2502 UNI EN 2502 (Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Bars) | 2 | chevron_right |
| UNI EN 2503 UNI EN 2503 (Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Forgings - De ≤ 150 mm) | 2 | chevron_right |
| UNI EN 2510 UNI EN 2510 (Aerospace series - Aluminium alloy 2024 - T42 - Drawn tubes for structural applications) | 1 | chevron_right |
| UNI EN 2511 UNI EN 2511 (Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm < a ≤ 100 mm) | 1 | chevron_right |
| UNI EN 2512 UNI EN 2512 (Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a ≤ 100 mm) | 1 | chevron_right |
| UNI EN 2540 UNI EN 2540 (Aerospace series - Steel X7CrNiAl17-7 (1.4568) - Air melted - Solution treated and precipitation hardened - Sheet and strip - a ≤ 6 mm - 1 240 MPa ≤ Rm ≤ 1 450 MPa) | 2 | chevron_right |
| UNI EN 2541 UNI EN 2541 (Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Wire for spring - D ≤ 4,0 mm) | 1 | chevron_right |
| UNI EN 2542 UNI EN 2542 (Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and wire - De ≤ 40 mm - For prevailing torque nuts) | 2 | chevron_right |
| UNI EN 2543 UNI EN 2543 (Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip - 0,3 mm ≤ a ≤ 2 mm - For prevailing torque nuts) | 2 | chevron_right |
| UNI EN 2566 UNI EN 2566 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD) | 1 | chevron_right |
| UNI EN 2567 UNI EN 2567 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD) | 1 | chevron_right |
| UNI EN 2568 UNI EN 2568 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD) | 1 | chevron_right |
| UNI EN 2573 UNI EN 2573 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Wires - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa) | 3 | chevron_right |
| UNI EN 2630 UNI EN 2630 (Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm with peripheral coarse grain control) | 1 | chevron_right |
| UNI EN 2632 UNI EN 2632 (Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| UNI EN 2633 UNI EN 2633 (Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control) | 1 | chevron_right |
| UNI EN 2635 UNI EN 2635 (Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bar and section - a or D ≤ 200 mm with peripheral coarse grain control) | 1 | chevron_right |
| UNI EN 2636 UNI EN 2636 (Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm with peripheral coarse grain control) | 1 | chevron_right |
| UNI EN 2638 UNI EN 2638 (Aerospace series - Aluminium alloy 2024-T3 - Extruded bar and section - 1,2 mm ≤ (a or D) ≤ 150 mm with coarse peripheral grain control) | 1 | chevron_right |
| UNI EN 2681 UNI EN 2681 (Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| UNI EN 2684 UNI EN 2684 (Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm < a ≤ 140 mm) | 1 | chevron_right |
| UNI EN 26848 UNI EN 26848 (Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding) | 9 | chevron_right |
| UNI EN 2687 UNI EN 2687 (Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| UNI EN 26871 UNI EN 26871 (Dentistry; dental base metal casting alloys (ISO 6871:1987)) | 1 | chevron_right |
| UNI EN 2693 UNI EN 2693 (Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2694 UNI EN 2694 (Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2695 UNI EN 2695 (Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2696 UNI EN 2696 (Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2699 UNI EN 2699 (Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm < D < 50 mm) | 1 | chevron_right |
| UNI EN 2702 UNI EN 2702 (Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Drawn or extruded bar and section - a or D ≤ 200 mm) | 1 | chevron_right |
| UNI EN 2703 UNI EN 2703 (Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2704 UNI EN 2704 (Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Drawn bars - De ≤ 75 mm) | 1 | chevron_right |
| UNI EN 2709 UNI EN 2709 (Aerospace series - Aluminium alloy 2024 - T3510 - Bars and sections -1.2 mm ≤ (a or D) ≤ 150 mm - With peripheral coarse grain control) | 1 | chevron_right |
| UNI EN 2726 UNI EN 2726 (Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a ≤ 20 mm) | 1 | chevron_right |
| UNI EN 2728 UNI EN 2728 (Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a ≤ 20 mm) | 1 | chevron_right |
| UNI EN 2731 UNI EN 2731 (Aerospace series - Magnesium alloy MG-C46001 - T6 - Sand casting) | 1 | chevron_right |
| UNI EN 2732 UNI EN 2732 (Aerospace series - Magnesium alloy MG-C46001-T6 - Chill casting) | 1 | chevron_right |
| UNI EN 2795 UNI EN 2795 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD) | 1 | chevron_right |
| UNI EN 2796 UNI EN 2796 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD) | 1 | chevron_right |
| UNI EN 2798 UNI EN 2798 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD) | 1 | chevron_right |
| UNI EN 2799 UNI EN 2799 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD) | 1 | chevron_right |
| UNI EN 2802 UNI EN 2802 (Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2803 UNI EN 2803 (Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 2813 UNI EN 2813 (Aerospace series - Aluminium alloy AL-P-6061 - T6 - Drawn tube for pressure applications - 0,6 mm ≤ a ≤ 12,5 mm) | 1 | chevron_right |
| UNI EN 2815 UNI EN 2815 (Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 965 MPa) | 2 | chevron_right |
| UNI EN 2816 UNI EN 2816 (Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 965 MPa) | 2 | chevron_right |
| UNI EN 2817 UNI EN 2817 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1070 MPa) | 2 | chevron_right |
| UNI EN 2818 UNI EN 2818 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1070 MPa) | 2 | chevron_right |
| UNI EN 2821 UNI EN 2821 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - Rm ≥ 1310 MPa) | 3 | chevron_right |
| UNI EN 2835 UNI EN 2835 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 40 IRHD) | 1 | chevron_right |
| UNI EN 2836 UNI EN 2836 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD) | 1 | chevron_right |
| UNI EN 2837 UNI EN 2837 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD) | 1 | chevron_right |
| UNI EN 2838 UNI EN 2838 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD) | 1 | chevron_right |
| UNI EN 2839 UNI EN 2839 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD) | 1 | chevron_right |
| UNI EN 2840 UNI EN 2840 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD) | 1 | chevron_right |
| UNI EN 2841 UNI EN 2841 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 60 IRHD) | 1 | chevron_right |
| UNI EN 2842 UNI EN 2842 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 70 IRHD) | 1 | chevron_right |
| UNI EN 2843 UNI EN 2843 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD) | 1 | chevron_right |
| UNI EN 2844 UNI EN 2844 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IRHD) | 1 | chevron_right |
| UNI EN 2845 UNI EN 2845 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 50 IRHD) | 1 | chevron_right |
| UNI EN 2846 UNI EN 2846 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD) | 1 | chevron_right |
| UNI EN 2847 UNI EN 2847 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 70 IRHD) | 1 | chevron_right |
| UNI EN 2848 UNI EN 2848 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 80 IRHD) | 1 | chevron_right |
| UNI EN 2849 UNI EN 2849 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD) | 1 | chevron_right |
| UNI EN 286-4 UNI EN 286-4 (Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway folling stock) | 10 | chevron_right |
| UNI EN 28839 UNI EN 28839 (Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals) | 28 | chevron_right |
| UNI EN 29453 UNI EN 29453 (Soft solder alloys. Chemical compositions and forms) | 74 | chevron_right |
| UNI EN 2947 UNI EN 2947 (Aerospace series. Steel FE-PA3004 (X10CrNi18-09). Air melted. Non heat treated. Cold drawn wire. a or D ≤ 2,3 mm) | 2 | chevron_right |
| UNI EN 2952 UNI EN 2952 (Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1270 MPa ≤ Rm ≤ 1550 MPa) | 1 | chevron_right |
| UNI EN 2959 UNI EN 2959 (Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners 3 mm ≤ D ≤ 30 mm) | 2 | chevron_right |
| UNI EN 2960 UNI EN 2960 (Aerospace series - Heat resisting nickel base alloy (NI-P101HT), Cold worked and solution treated - Bars for machining for fasteners 3 mm ≤ D ≤ 50 mm) | 1 | chevron_right |
| UNI EN 300 UNI EN 300 (Oriented Strand Boards (OSB) - Definitions, classification and specifications) | 4 | chevron_right |
| UNI EN 3018 UNI EN 3018 (Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm) | 2 | chevron_right |
| UNI EN 3115 UNI EN 3115 (Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D ≤ 10 mm) | 1 | chevron_right |
| UNI EN 312 UNI EN 312 (Particleboards - Specifications) | 7 | chevron_right |
| UNI EN 3120 UNI EN 3120 (Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress relieved - Seamless tube for pressure systems - 4 mm ≤ D ≤ 51 mm - 690 MPa ≤ Rm ≤ 1 030 MPa) | 1 | chevron_right |
| UNI EN 3160 UNI EN 3160 (Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1310 MPa) | 2 | chevron_right |
| UNI EN 3161 UNI EN 3161 (Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa) | 2 | chevron_right |
| UNI EN 3162 UNI EN 3162 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 930 MPa) | 3 | chevron_right |
| UNI EN 3163 UNI EN 3163 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| UNI EN 3219 UNI EN 3219 (Aerospace series - Heat resisting nickel base alloy (NI-P100HT) - Cold worked and softened - Bar and wire for continuous forging extrusion for fasteners - 3 mm ≤ D ≤ 30 mm) | 1 | chevron_right |
| UNI EN 3220 UNI EN 3220 (Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ≤ D ≤ 30 mm) | 1 | chevron_right |
| UNI EN 3310 UNI EN 3310 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Not heat treated - Forging stock, for annealed forgings - De ≤ 360 mm) | 2 | chevron_right |
| UNI EN 3311 UNI EN 3311 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar for machining - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1160 MPa) | 2 | chevron_right |
| UNI EN 3312 UNI EN 3312 (Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Forgings De ≤ 150 mm) | 2 | chevron_right |
| UNI EN 3314 UNI EN 3314 (Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D ≤ 75 mm) | 1 | chevron_right |
| UNI EN 3315 UNI EN 3315 (Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - De ≤ 75 mm) | 2 | chevron_right |
| UNI EN 3329 UNI EN 3329 (Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts) | 2 | chevron_right |
| UNI EN 3330 UNI EN 3330 (Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealead - Bar and wire - De ≤ 40 mm - For prevailing torque nuts) | 2 | chevron_right |
| UNI EN 3332 UNI EN 3332 (Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 3333 UNI EN 3333 (Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 3335 UNI EN 3335 (Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 3338 UNI EN 3338 (Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| UNI EN 3339 UNI EN 3339 (Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a ≤ 200 mm) | 1 | chevron_right |
| UNI EN 3341 UNI EN 3341 (Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 3342 UNI EN 3342 (Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D ≤ 150 mm) | 1 | chevron_right |
| UNI EN 3344 UNI EN 3344 (Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| UNI EN 3347 UNI EN 3347 (Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| UNI EN 3351 UNI EN 3351 (Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De ≤ 150 mm) | 1 | chevron_right |
| UNI EN 3354 UNI EN 3354 (Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Sheet for superplastic forming. a ≤ 6 mm) | 2 | chevron_right |
| UNI EN 3355 UNI EN 3355 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa) | 2 | chevron_right |
| UNI EN 3357 UNI EN 3357 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 150 mm - 1 200 MPa ≤ Rm ≤ 1 400 MPa) | 2 | chevron_right |
| UNI EN 3358 UNI EN 3358 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 150 mm - Rm ≥ 1400 MPa) | 2 | chevron_right |
| UNI EN 3359 UNI EN 3359 (Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Vacuum induction melted and consumable electrode remelted - softened - forging stocks - a or D ≤ 300 mm) | 3 | chevron_right |
| UNI EN 3361 UNI EN 3361 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6mm - 1070 MPa ≤ Rm ≤ 1220 MPa) | 3 | chevron_right |
| UNI EN 3364 UNI EN 3364 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted, softened - Forging stocks - a or D ≤ 300 mm) | 3 | chevron_right |
| UNI EN 3365 UNI EN 3365 (Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted, softened - forging stock - a or D ≤ 300 mm) | 3 | chevron_right |
| UNI EN 3378 UNI EN 3378 (Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets - 1,6 mm ≤ D ≤ 10 mm) | 1 | chevron_right |
| UNI EN 3451 UNI EN 3451 (Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock, for annealed forgings - a or D ≤ 300 mm) | 1 | chevron_right |
| UNI EN 3456 UNI EN 3456 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled - a ≤ 6 mm) | 2 | chevron_right |
| UNI EN 3459 UNI EN 3459 (Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a ≤ 50 mm) | 2 | chevron_right |
| UNI EN 3460 UNI EN 3460 (Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D ≤ 150 - Rm ≥ 390 MPa) | 1 | chevron_right |
| UNI EN 3464 UNI EN 3464 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm) | 2 | chevron_right |
| UNI EN 3468 UNI EN 3468 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 MPa ≤ Rm ≤ 700 MPa - Forgings - De ≤ 100 mm) | 3 | chevron_right |
| UNI EN 3469 UNI EN 3469 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa) | 2 | chevron_right |
| UNI EN 3470 UNI EN 3470 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1200 MPa ≤ Rm ≤ 1400 MPa) | 2 | chevron_right |
| UNI EN 3471 UNI EN 3471 (Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Strip for spring - a ≤ 4,0 mm) | 1 | chevron_right |
| UNI EN 3474 UNI EN 3474 (Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 3476 UNI EN 3476 (Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Softened. Forging stock. a or D ≤ 300 mm) | 2 | chevron_right |
| UNI EN 3479 UNI EN 3479 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa) | 3 | chevron_right |
| UNI EN 3480 UNI EN 3480 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Plates - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| UNI EN 3481 UNI EN 3481 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Hollow bars - 5 mm ≤ a ≤ 12 mm) | 3 | chevron_right |
| UNI EN 3482 UNI EN 3482 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Forging stock - De ≤ 100 mm) | 3 | chevron_right |
| UNI EN 3484 UNI EN 3484 (Aerospace series - Steel X5CrNiCuNb16-4 (1.4549 type 1.4542) - As cast - Reference heat treatment: homogenised, solution treated, precipitation hardened and sub zero - Remelting stock) | 3 | chevron_right |
| UNI EN 3486 UNI EN 3486 (Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Solution annealed and precipitation hardened - 1400 ≤ Rm ≤ 1550 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| UNI EN 3487 UNI EN 3487 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| UNI EN 3488 UNI EN 3488 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Sheets and strips - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| UNI EN 3489 UNI EN 3489 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 ≤ Rm ≤ 750 MPa - Tubes for structures - 0.5 ≤ a ≤ 5 mm) | 3 | chevron_right |
| UNI EN 3490 UNI EN 3490 (Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted - Hardened and tempered - Bars for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 3 | chevron_right |
| UNI EN 3491 UNI EN 3491 (Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 2 | chevron_right |
| UNI EN 3507 UNI EN 3507 (Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa) | 2 | chevron_right |
| UNI EN 3510 UNI EN 3510 (Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm) | 2 | chevron_right |
| UNI EN 3523 UNI EN 3523 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars for machining - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa) | 3 | chevron_right |
| UNI EN 3524 UNI EN 3524 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm ≤ a ≤ 6 mm - 1080 MPa ≤ Rm ≤ 1280 MPa) | 2 | chevron_right |
| UNI EN 3525 UNI EN 3525 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm ≤ a ≤ 20 mm - 1080 MPa ≤ Rm ≤ 1280 MPa) | 2 | chevron_right |
| UNI EN 3526 UNI EN 3526 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1180 MPa) | 2 | chevron_right |
| UNI EN 3527 UNI EN 3527 (Aerospace series - Steel 33CrMoV12 (1.8522) - Air melted - Softened - Forging stock - a or D ≤ 300 mm) | 3 | chevron_right |
| UNI EN 3528 UNI EN 3528 (Aerospace series. Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 2 | chevron_right |
| UNI EN 3529 UNI EN 3529 (Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 2 | chevron_right |
| UNI EN 3531 UNI EN 3531 (Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 3 | chevron_right |
| UNI EN 3532 UNI EN 3532 (Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 3 | chevron_right |
| UNI EN 3552 UNI EN 3552 (Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 3553 UNI EN 3553 (Aerospace series - Aluminium alloy AL-P2618A - T6511 - Extruded bar and section - a or D ≤ 160 mm) | 1 | chevron_right |
| UNI EN 3557 UNI EN 3557 (Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications - 0,6 mm ≤ a ≤ 3 mm) | 1 | chevron_right |
| UNI EN 3638 UNI EN 3638 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets, strips and plates - 0,5 ≤ a ≤ 10 mm) | 3 | chevron_right |
| UNI EN 3639 UNI EN 3639 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 3 | chevron_right |
| UNI EN 3666 UNI EN 3666 (Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1550 MPa ≤ Rm ≤ 1830 MPa) | 1 | chevron_right |
| UNI EN 3668 UNI EN 3668 (Aerospace series. Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9). Non heat treated. Forging stock. a or D ≤ 250 mm) | 2 | chevron_right |
| UNI EN 3671 UNI EN 3671 (Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D ≤ 250 mm) | 2 | chevron_right |
| UNI EN 3677 UNI EN 3677 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa) | 3 | chevron_right |
| UNI EN 3678 UNI EN 3678 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa) | 3 | chevron_right |
| UNI EN 3697 UNI EN 3697 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD) | 1 | chevron_right |
| UNI EN 3698 UNI EN 3698 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD) | 1 | chevron_right |
| UNI EN 3761 UNI EN 3761 (Aerospace series - Heat resisting alloy FE-PA2601 - Softened and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1100 MPa ≤ Rm ≤ 1300 MPa) | 1 | chevron_right |
| UNI EN 3762 UNI EN 3762 (Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold worked - Wire for forged fasteners - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| UNI EN 3813 UNI EN 3813 (Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. De ≤ 50 mm) | 2 | chevron_right |
| UNI EN 3816 UNI EN 3816 (Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened and cold rolled - Sheet and strip a ≤ 3 mm - Rm ≥ 800 MPa) | 2 | chevron_right |
| UNI EN 3825 UNI EN 3825 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD) | 1 | chevron_right |
| UNI EN 3826 UNI EN 3826 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD) | 1 | chevron_right |
| UNI EN 3827 UNI EN 3827 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD) | 1 | chevron_right |
| UNI EN 3872 UNI EN 3872 (Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a ≤ 200 mm) | 1 | chevron_right |
| UNI EN 3882 UNI EN 3882 (Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3883 UNI EN 3883 (Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3884 UNI EN 3884 (Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3885 UNI EN 3885 (Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3886 UNI EN 3886 (Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3887 UNI EN 3887 (Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3888 UNI EN 3888 (Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3889 UNI EN 3889 (Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3890 UNI EN 3890 (Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3892 UNI EN 3892 (Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding) | 1 | chevron_right |
| UNI EN 3893 UNI EN 3893 (Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding) | 1 | chevron_right |
| UNI EN 3894 UNI EN 3894 (Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3895 UNI EN 3895 (Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3896 UNI EN 3896 (Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 3897 UNI EN 3897 (Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding) | 2 | chevron_right |
| UNI EN 39 UNI EN 39 (Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions) | 2 | chevron_right |
| UNI EN 3917 UNI EN 3917 (Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3918 UNI EN 3918 (Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Tape) | 2 | chevron_right |
| UNI EN 3919 UNI EN 3919 (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| UNI EN 3920 UNI EN 3920 (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3921 UNI EN 3921 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| UNI EN 3922 UNI EN 3922 (Aerospace series - Nickel base alloy Ni-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| UNI EN 3923 UNI EN 3923 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3924 UNI EN 3924 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| UNI EN 3925 UNI EN 3925 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| UNI EN 3926 UNI EN 3926 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| UNI EN 3927 UNI EN 3927 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3928 UNI EN 3928 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| UNI EN 3930 UNI EN 3930 (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3931 UNI EN 3931 (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Tape) | 2 | chevron_right |
| UNI EN 3932 UNI EN 3932 (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| UNI EN 3933 UNI EN 3933 (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3934 UNI EN 3934 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| UNI EN 3935 UNI EN 3935 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| UNI EN 3936 UNI EN 3936 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3937 UNI EN 3937 (Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3938 UNI EN 3938 (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| UNI EN 3939 UNI EN 3939 (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3940 UNI EN 3940 (Aerospace series - Nickel base alloy NI-B46001 (NiCoSi5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| UNI EN 3941 UNI EN 3941 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| UNI EN 3942 UNI EN 3942 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| UNI EN 3943 UNI EN 3943 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3944 UNI EN 3944 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| UNI EN 3945 UNI EN 3945 (Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3946 UNI EN 3946 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3947 UNI EN 3947 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| UNI EN 3948 UNI EN 3948 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Wire) | 2 | chevron_right |
| UNI EN 3952 UNI EN 3952 (Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire) | 2 | chevron_right |
| UNI EN 3953 UNI EN 3953 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire) | 2 | chevron_right |
| UNI EN 3954 UNI EN 3954 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3955 UNI EN 3955 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| UNI EN 3956 UNI EN 3956 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire) | 2 | chevron_right |
| UNI EN 3957 UNI EN 3957 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3958 UNI EN 3958 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| UNI EN 3959 UNI EN 3959 (Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3960 UNI EN 3960 (Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| UNI EN 3961 UNI EN 3961 (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| UNI EN 3962 UNI EN 3962 (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire) | 2 | chevron_right |
| UNI EN 3963 UNI EN 3963 (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Rolled foil) | 1 | chevron_right |
| UNI EN 3964 UNI EN 3964 (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Wire) | 1 | chevron_right |
| UNI EN 3965 UNI EN 3965 (Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing - Rolled foil) | 1 | chevron_right |
| UNI EN 3969 UNI EN 3969 (Aerospace series. Steel FE-PL1507 (40CrMoV12). Air melted. Annealed. Forging stock. a or D ≤ 350 mm) | 2 | chevron_right |
| UNI EN 3971 UNI EN 3971 (Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm) | 2 | chevron_right |
| UNI EN 3972 UNI EN 3972 (Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa) | 2 | chevron_right |
| UNI EN 3973 UNI EN 3973 (Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa) | 2 | chevron_right |
| UNI EN 3979 UNI EN 3979 (Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 3982 UNI EN 3982 (Aerospace series - Aluminium alloy AL-P7050 - AlZn6CuMgZr - T7451 - Plates - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| UNI EN 3983 UNI EN 3983 (Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| UNI EN 3997 UNI EN 3997 (Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T3 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 3998 UNI EN 3998 (Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 3999 UNI EN 3999 (Aerospace series - Aluminium alloy AL-P2024-T351 - Sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4001 UNI EN 4001 (Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4002 UNI EN 4002 (Aerospace series. Aluminium alloy AL-P2219-T81. Sheet and strip 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4003 UNI EN 4003 (Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4004 UNI EN 4004 (Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4005 UNI EN 4005 (Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4006 UNI EN 4006 (Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4007 UNI EN 4007 (Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4085 UNI EN 4085 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| UNI EN 4098 UNI EN 4098 (Aerospace series - Steel 40CrMoV12 (1.8523) - Consumable electrode remelted - Hardened and tempered - Forgings - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa) | 3 | chevron_right |
| UNI EN 4099 UNI EN 4099 (Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4100 UNI EN 4100 (Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4101 UNI EN 4101 (Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4102 UNI EN 4102 (Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4103 UNI EN 4103 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| UNI EN 4104 UNI EN 4104 (Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing - Powder or paste) | 1 | chevron_right |
| UNI EN 4105 UNI EN 4105 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape) | 2 | chevron_right |
| UNI EN 4202 UNI EN 4202 (Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm < a ≤ 25 mm) | 1 | chevron_right |
| UNI EN 4203 UNI EN 4203 (Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4204 UNI EN 4204 (Aerospace series - Aluminium alloy AL-P8090 - T841 - Sheet - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4209 UNI EN 4209 (Aerospace series - Aluminium alloy AL-P2219-T851 - Plate - 6 mm < a ≤ 50 mm) | 1 | chevron_right |
| UNI EN 4211 UNI EN 4211 (Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6 mm < a ≤ 25 mm) | 1 | chevron_right |
| UNI EN 4212 UNI EN 4212 (Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| UNI EN 4213 UNI EN 4213 (Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| UNI EN 4214 UNI EN 4214 (Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm < a ≤ 20 mm) | 1 | chevron_right |
| UNI EN 4215 UNI EN 4215 (Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| UNI EN 4216 UNI EN 4216 (Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa) | 2 | chevron_right |
| UNI EN 4244 UNI EN 4244 (Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D 200 mm - 1 000 MPa Rm 1 140 MPa) | 1 | chevron_right |
| UNI EN 4245 UNI EN 4245 (Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - As forged - Forging stock - De 300 mm) | 1 | chevron_right |
| UNI EN 4247 UNI EN 4247 (Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm < a ≤ 140 mm) | 1 | chevron_right |
| UNI EN 4250 UNI EN 4250 (Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| UNI EN 4262 UNI EN 4262 (Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880 MPa) | 2 | chevron_right |
| UNI EN 4263 UNI EN 4263 (Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960 MPa) | 2 | chevron_right |
| UNI EN 4264 UNI EN 4264 (Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 - As forged - Forging stock - a or D ≤ 200 mm) | 2 | chevron_right |
| UNI EN 4283 UNI EN 4283 (Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm < a ≤ 40 mm) | 1 | chevron_right |
| UNI EN 4286 UNI EN 4286 (Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a ≤ 125 mm) | 1 | chevron_right |
| UNI EN 4287 UNI EN 4287 (Aerospace series - Aluminium alloy AL-P7010 - Forging stock) | 1 | chevron_right |
| UNI EN 4289 UNI EN 4289 (Aerospace series - Aluminium alloy AL-P7175- Forging stock) | 1 | chevron_right |
| UNI EN 4291 UNI EN 4291 (Aerospace series - Aluminium alloy AL-P8090 - Forging stock) | 1 | chevron_right |
| UNI EN 4292 UNI EN 4292 (Aerospace series - Aluminium alloy AL-R39002 - Forging stock) | 1 | chevron_right |
| UNI EN 4293 UNI EN 4293 (Aerospce series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D ≤ 150 mm) | 1 | chevron_right |
| UNI EN 4313 UNI EN 4313 (Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4314 UNI EN 4314 (Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4680) - Consumable electrode remelted - Not heat treated - Forging stock - a or D ≤ 250 mm) | 3 | chevron_right |
| UNI EN 4315 UNI EN 4315 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - a or D ≤ 100 mm - Rm ≥ 900 MPa) | 3 | chevron_right |
| UNI EN 4317 UNI EN 4317 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Not heat treated - Forging stock - a or D ≤ 200 mm) | 3 | chevron_right |
| UNI EN 4318 UNI EN 4318 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm - Rm ≥ 960 MPa) | 3 | chevron_right |
| UNI EN 4324 UNI EN 4324 (Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod) | 1 | chevron_right |
| UNI EN 4325 UNI EN 4325 (Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4326 UNI EN 4326 (Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4327 UNI EN 4327 (Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4328 UNI EN 4328 (Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4329 UNI EN 4329 (Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4330 UNI EN 4330 (Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4331 UNI EN 4331 (Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4332 UNI EN 4332 (Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4333 UNI EN 4333 (Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4334 UNI EN 4334 (Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4335 UNI EN 4335 (Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4336 UNI EN 4336 (Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4337 UNI EN 4337 (Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn3) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4338 UNI EN 4338 (Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4339 UNI EN 4339 (Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4340 UNI EN 4340 (Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| UNI EN 4341 UNI EN 4341 (Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| UNI EN 4342 UNI EN 4342 (Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| UNI EN 4343 UNI EN 4343 (Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4344 UNI EN 4344 (Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4346 UNI EN 4346 (Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm) | 2 | chevron_right |
| UNI EN 4347 UNI EN 4347 (Aerospace series Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm) | 2 | chevron_right |
| UNI EN 4372 UNI EN 4372 (Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D ≤ 10 mm) | 2 | chevron_right |
| UNI EN 4373 UNI EN 4373 (Aerospace series. Heat resisting alloy NI-PD9001 (NiCu31). Annealed, seamless tube D ≤ 75 mm, a ≤ 3 mm) | 2 | chevron_right |
| UNI EN 4374 UNI EN 4374 (Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - De ≤ 200 mm) | 2 | chevron_right |
| UNI EN 4376 UNI EN 4376 (Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated - Bar and section, De ≤ 200 mm) | 2 | chevron_right |
| UNI EN 4377 UNI EN 4377 (Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| UNI EN 4379 UNI EN 4379 (Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De ≤ 200 mm) | 2 | chevron_right |
| UNI EN 4382 UNI EN 4382 (Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D ≤ 50 mm, a ≤ 3 mm) | 2 | chevron_right |
| UNI EN 4383 UNI EN 4383 (Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock) | 2 | chevron_right |
| UNI EN 4384 UNI EN 4384 (Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock) | 2 | chevron_right |
| UNI EN 440 UNI EN 440 (Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification) | 10 | chevron_right |
| UNI EN 4449 UNI EN 4449 (Aerospace series - Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4450 UNI EN 4450 (Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| UNI EN 4461 UNI EN 4461 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa) | 2 | chevron_right |
| UNI EN 4462 UNI EN 4462 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa) | 2 | chevron_right |
| UNI EN 4463 UNI EN 4463 (Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| UNI EN 4464 UNI EN 4464 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 200 MPa) | 2 | chevron_right |
| UNI EN 4465 UNI EN 4465 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 300 MPa) | 2 | chevron_right |
| UNI EN 4466 UNI EN 4466 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 400 MPa) | 2 | chevron_right |
| UNI EN 4467 UNI EN 4467 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa) | 2 | chevron_right |
| UNI EN 4468 UNI EN 4468 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa) | 2 | chevron_right |
| UNI EN 4469 UNI EN 4469 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| UNI EN 4470 UNI EN 4470 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1200 MPa) | 2 | chevron_right |
| UNI EN 4471 UNI EN 4471 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1300 MPa) | 2 | chevron_right |
| UNI EN 4472 UNI EN 4472 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| UNI EN 4528 UNI EN 4528 (Aerospace series. Steel FE-PA 3903 (X10CrNi18-8) - Cold rolled - Strip for springs. a ≤ 3 mm. 1250 MPa ≤ Rm ≤ 1640 MPa) | 2 | chevron_right |
| UNI EN 4566 UNI EN 4566 (Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| UNI EN 4570 UNI EN 4570 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 Solution treated Forgings De ≤ 100 mm) | 2 | chevron_right |
| UNI EN 4571 UNI EN 4571 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Bars and sections - De = 100 mm) | 2 | chevron_right |
| UNI EN 4572 UNI EN 4572 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Sheets and strips - a ≤ 3 mm) | 2 | chevron_right |
| UNI EN 4573 UNI EN 4573 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm) | 2 | chevron_right |
| UNI EN 4574 UNI EN 4574 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| UNI EN 4575 UNI EN 4575 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and descaled - Sheets and plates - 3 mm < a ≤ 50 mm) | 2 | chevron_right |
| UNI EN 4615 UNI EN 4615 (Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting) | 1 | chevron_right |
| UNI EN 4616 UNI EN 4616 (Aerospace series - Magnesium alloy MG-C18002 - T4 - Chill casting) | 1 | chevron_right |
| UNI EN 4627 UNI EN 4627 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 3 | chevron_right |
| UNI EN 4628 UNI EN 4628 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| UNI EN 4629 UNI EN 4629 (Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De ≤ 300 mm) | 2 | chevron_right |
| UNI EN 4630 UNI EN 4630 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 3 | chevron_right |
| UNI EN 4631 UNI EN 4631 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 3 | chevron_right |
| UNI EN 4642 UNI EN 4642 (Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 2 | chevron_right |
| UNI EN 4655 UNI EN 4655 (Aerospace series. Steel FEPM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| UNI EN 4656 UNI EN 4656 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1520 MPa) | 2 | chevron_right |
| UNI EN 4657 UNI EN 4657 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation remelted - Bars - a or D < 200 mm - Rm > 1 650 MPa) | 2 | chevron_right |
| UNI EN 4658 UNI EN 4658 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 520 MPa) | 2 | chevron_right |
| UNI EN 4659 UNI EN 4659 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 650 Mpa) | 2 | chevron_right |
| UNI EN 4670 UNI EN 4670 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| UNI EN 4671 UNI EN 4671 (Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1400 MPa) | 2 | chevron_right |
| UNI EN 4672 UNI EN 4672 (Aerospace series - Steel FE-PM1504 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| UNI EN 4675 UNI EN 4675 (Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Bars - De < 110 mm) | 2 | chevron_right |
| UNI EN 4683 UNI EN 4683 (Aerospace series - Steel FE-WM 3504 (X4CrNiMo16-5-1) - Air melted - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| UNI EN 4685 UNI EN 4685 (Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 mm - Rm ≥ 1 240 MPa) | 1 | chevron_right |
| UNI EN 4720 UNI EN 4720 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| UNI EN 4721 UNI EN 4721 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 2 | chevron_right |
| UNI EN 4725 UNI EN 4725 (Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm < a ≤ 150 mm) | 1 | chevron_right |
| UNI EN 4825 UNI EN 4825 (Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consumable electrode remelted - Hardened and tempered - Bars - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1100 MPa) | 2 | chevron_right |
| UNI EN 4842 UNI EN 4842 (Aerospace series - X5CrNiCu15-5 (1.4545)- Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining, a or D ≤ 250 mm, 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)) | 2 | chevron_right |
| UNI EN 485-2 UNI EN 485-2 (Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties) | 110 | chevron_right |
| UNI EN 486 UNI EN 486 (Aluminium and aluminium alloys - Extrusion ingots - Specifications) | 444 | chevron_right |
| UNI EN 487 UNI EN 487 (Aluminium and aluminium alloys - Rolling ingots - Specifications) | 184 | chevron_right |
| UNI EN 4882 UNI EN 4882 (Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa) | 2 | chevron_right |
| UNI EN 4883 UNI EN 4883 (Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Plates - 6 mm ≤ a ≤ 100 mm - Rm ≥ 1 070 MPa) | 2 | chevron_right |
| UNI EN 4884 UNI EN 4884 (Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa) | 2 | chevron_right |
| UNI EN 4890 UNI EN 4890 (Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1050 MPa) | 1 | chevron_right |
| UNI EN 4900 UNI EN 4900 (Aerospace series - Aluminium alloy 5086 - H111 - Extruded bars - 10 mm ≤ D ≤ 300 mm) | 1 | chevron_right |
| UNI EN 4904 UNI EN 4904 (Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa - Bars - 100 mm ≤ D ≤ 250 mm) | 2 | chevron_right |
| UNI EN 499 UNI EN 499 (Welding consumables - Covered electrodes for manual metal arc welding of non alloy and fine grain steels) | 7 | chevron_right |
| UNI EN 50149 UNI EN 50149 (Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires) | 20 | chevron_right |
| UNI EN 50183 UNI EN 50183 (Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires) | 6 | chevron_right |
| UNI EN 50189 UNI EN 50189 (Conductors for overhead lines. Zinc coated steel wires) | 6 | chevron_right |
| UNI EN 50307 UNI EN 50307 (Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables) | 23 | chevron_right |
| UNI EN 541 UNI EN 541 (Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications) | 22 | chevron_right |
| UNI EN 546-2 UNI EN 546-2 (Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties) | 22 | chevron_right |
| UNI EN 549 UNI EN 549 (Rubber materials for seals and diaphragms for gas appliances and gas equipment) | 60 | chevron_right |
| UNI EN 570 UNI EN 570 (Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification) | 47 | chevron_right |
| UNI EN 573-3 UNI EN 573-3 (Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products) | 454 | chevron_right |
| UNI EN 575 UNI EN 575 (Aluminium and aluminium alloys - Master alloys produced by melting - Specifications) | 100 | chevron_right |
| UNI EN 576 UNI EN 576 (Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications) | 54 | chevron_right |
| UNI EN 586-2 UNI EN 586-2 (Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements) | 12 | chevron_right |
| UNI EN 601 UNI EN 601 (Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff) | 1 | chevron_right |
| UNI EN 602 UNI EN 602 (Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff) | 1 | chevron_right |
| UNI EN 603-2 UNI EN 603-2 (Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties) | 18 | chevron_right |
| UNI EN 60454-3-1 UNI EN 60454-3-1 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3-1: Specifications for individual materials - PVC film tapes with pressure-sensitive adhesive) | 12 | chevron_right |
| UNI EN 60454-3-11 UNI EN 60454-3-11 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives) | 13 | chevron_right |
| UNI EN 60454-3-12 UNI EN 60454-3-12 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive) | 9 | chevron_right |
| UNI EN 60454-3-14 UNI EN 60454-3-14 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive) | 5 | chevron_right |
| UNI EN 60454-3-19 UNI EN 60454-3-19 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides) | 4 | chevron_right |
| UNI EN 60454-3-2 UNI EN 60454-3-2 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives) | 8 | chevron_right |
| UNI EN 60454-3-4 UNI EN 60454-3-4 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive) | 2 | chevron_right |
| UNI EN 60454-3-7 UNI EN 60454-3-7 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive) | 4 | chevron_right |
| UNI EN 60454-3-8 UNI EN 60454-3-8 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fiber) | 5 | chevron_right |
| UNI EN 60672-3 UNI EN 60672-3 (Ceramic and glass-insulating materials - Part 3: Specifications for individual materials) | 54 | chevron_right |
| UNI EN 60674-3-1 UNI EN 60674-3-1 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors) | 12 | chevron_right |
| UNI EN 60674-3-4 to 6 UNI EN 60674-3-4 to 6 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation) | 12 | chevron_right |
| UNI EN 60674-3-7 UNI EN 60674-3-7 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation) | 3 | chevron_right |
| UNI EN 60674-3-8 UNI EN 60674-3-8 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation) | 3 | chevron_right |
| UNI EN 60893-3-2 UNI EN 60893-3-2 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins) | 20 | chevron_right |
| UNI EN 60893-3-3 UNI EN 60893-3-3 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 606893-3-3)) | 2 | chevron_right |
| UNI EN 60893-3-4 UNI EN 60893-3-4 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4)) | 18 | chevron_right |
| UNI EN 60893-3-5 UNI EN 60893-3-5 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins) | 5 | chevron_right |
| UNI EN 60893-3-6 UNI EN 60893-3-6 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins) | 2 | chevron_right |
| UNI EN 60893-3-7 UNI EN 60893-3-7 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimid resins) | 1 | chevron_right |
| UNI EN 610 UNI EN 610 (Tin and tin alloys - Ingot tin) | 5 | chevron_right |
| UNI EN 611-1 UNI EN 611-1 (Tin and tin alloys - Pewter and pewterware - Part 1: Pewter) | 6 | chevron_right |
| UNI EN 611-2 UNI EN 611-2 (Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware) | 3 | chevron_right |
| UNI EN 61212-3-1 UNI EN 61212-3-1 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes) | 15 | chevron_right |
| UNI EN 61212-3-2 UNI EN 61212-3-2 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated molded tubes) | 6 | chevron_right |
| UNI EN 61212-3-3 UNI EN 61212-3-3 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated molded rods) | 11 | chevron_right |
| UNI EN 61249-2-1 UNI EN 61249-2-1 (Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad) | 3 | chevron_right |
| UNI EN 61249-2-10 UNI EN 61249-2-10 (Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| UNI EN 61249-2-11 UNI EN 61249-2-11 (Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| UNI EN 61249-2-21 UNI EN 61249-2-21 (Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| UNI EN 61249-2-22 UNI EN 61249-2-22 (Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| UNI EN 61249-2-23 UNI EN 61249-2-23 (Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad) | 3 | chevron_right |
| UNI EN 61249-2-26 UNI EN 61249-2-26 (Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| UNI EN 61249-2-27 UNI EN 61249-2-27 (Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| UNI EN 61249-2-30 UNI EN 61249-2-30 (Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| UNI EN 61249-2-35 UNI EN 61249-2-35 (Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| UNI EN 61249-2-36 UNI EN 61249-2-36 (Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| UNI EN 61249-2-37 UNI EN 61249-2-37 (Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| UNI EN 61249-2-38 UNI EN 61249-2-38 (Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| UNI EN 61249-2-39 UNI EN 61249-2-39 (Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| UNI EN 61249-2-40 UNI EN 61249-2-40 (Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| UNI EN 61249-2-41 UNI EN 61249-2-41 (Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| UNI EN 61249-2-42 UNI EN 61249-2-42 (Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| UNI EN 61249-2-43 UNI EN 61249-2-43 (Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| UNI EN 61249-2-44 UNI EN 61249-2-44 (Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| UNI EN 61249-2-5 UNI EN 61249-2-5 (Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core / woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| UNI EN 61249-2-6 UNI EN 61249-2-6 (Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| UNI EN 61249-2-8 UNI EN 61249-2-8 (Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| UNI EN 61249-2-9 UNI EN 61249-2-9 (Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| UNI EN 622-2 UNI EN 622-2 (Fibreboards - Specifications - Part 2: Requirements for hardboards) | 6 | chevron_right |
| UNI EN 622-3 UNI EN 622-3 (Fibreboards - Specifications - Part 3: Requirements for medium boards) | 10 | chevron_right |
| UNI EN 622-4 UNI EN 622-4 (Fibreboards - Specifications - Part 4: Requirements for softboards) | 5 | chevron_right |
| UNI EN 622-5 UNI EN 622-5 (Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)) | 9 | chevron_right |
| UNI EN 683-2 UNI EN 683-2 (Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties) | 26 | chevron_right |
| UNI EN 754-2 UNI EN 754-2 (Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties) | 100 | chevron_right |
| UNI EN 755-2 UNI EN 755-2 (Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties) | 140 | chevron_right |
| UNI EN 756 UNI EN 756 (Welding consumables - Solid wire, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels) | 34 | chevron_right |
| UNI EN 757 UNI EN 757 (Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification) | 9 | chevron_right |
| UNI EN 758 UNI EN 758 (Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels) | 8 | chevron_right |
| UNI EN 988 UNI EN 988 (Zinc and zinc alloys - Specifications for rolled flat products for building) | 1 | chevron_right |
| UNI EN IEC 60674-3-2 UNI EN IEC 60674-3-2 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation) | 5 | chevron_right |
| UNI EN IEC 60674-3-3 UNI EN IEC 60674-3-3 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation) | 6 | chevron_right |
| UNI EN IEC 60674-3-4 UNI EN IEC 60674-3-4 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4: Polyimide films used for electrical insulation) | 7 | chevron_right |
| UNI EN IEC 61249-2-45 UNI EN IEC 61249-2-45 (Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| UNI EN IEC 61249-2-46 UNI EN IEC 61249-2-46 (Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| UNI EN IEC 61249-2-47 UNI EN IEC 61249-2-47 (Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2.0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| UNI EN ISO 10081-1 UNI EN ISO 10081-1 (Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003)) | 13 | chevron_right |
| UNI EN ISO 10081-2 UNI EN ISO 10081-2 (Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon (ISO 10081-2:2003)) | 36 | chevron_right |
| UNI EN ISO 10081-3 UNI EN ISO 10081-3 (Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 50% residual carbon (ISO 10081-3:2003)) | 96 | chevron_right |
| UNI EN ISO 10081-4 UNI EN ISO 10081-4 (Classification of dense shaped refractory products - Part 4: Special products (ISO 10081-4:2014)) | 175 | chevron_right |
| UNI EN ISO 10366-1 UNI EN ISO 10366-1 (Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002)) | 11 | chevron_right |
| UNI EN ISO 1071 UNI EN ISO 1071 (Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification) | 41 | chevron_right |
| UNI EN ISO 11542-1 UNI EN ISO 11542-1 (Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001)) | 9 | chevron_right |
| UNI EN ISO 1163-1 UNI EN ISO 1163-1 (Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995)) | 24 | chevron_right |
| UNI EN ISO 11833-1 UNI EN ISO 11833-1 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)) | 24 | chevron_right |
| UNI EN ISO 11833-2 UNI EN ISO 11833-2 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)) | 7 | chevron_right |
| UNI EN ISO 11960 UNI EN ISO 11960 (Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells) | 24 | chevron_right |
| UNI EN ISO 11961 UNI EN ISO 11961 (Petroleum and natural gas industries - Steel drill pipe) | 16 | chevron_right |
| UNI EN ISO 11963 UNI EN ISO 11963 (Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2019)) | 14 | chevron_right |
| UNI EN ISO 12153 UNI EN ISO 12153 (Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification) | 21 | chevron_right |
| UNI EN ISO 12683 UNI EN ISO 12683 (Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004)) | 27 | chevron_right |
| UNI EN ISO 13085 UNI EN ISO 13085 (Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells (ISO 13085:2014)) | 4 | chevron_right |
| UNI EN ISO 13356 UNI EN ISO 13356 (Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO 13356:2015)) | 1 | chevron_right |
| UNI EN ISO 13680 UNI EN ISO 13680 (Oil and gas industries including lower carbon energy - Corrosion - resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material -Technical delivery conditions) | 101 | chevron_right |
| UNI EN ISO 14172 UNI EN ISO 14172 (Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015)) | 51 | chevron_right |
| UNI EN ISO 14343 UNI EN ISO 14343 (Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification) | 125 | chevron_right |
| UNI EN ISO 1456 UNI EN ISO 1456 (Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium) | 382 | chevron_right |
| UNI EN ISO 14631 UNI EN ISO 14631 (Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:2021)) | 3 | chevron_right |
| UNI EN ISO 14632 UNI EN ISO 14632 (Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021)) | 4 | chevron_right |
| UNI EN ISO 15013 UNI EN ISO 15013 (Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007)) | 7 | chevron_right |
| UNI EN ISO 15015 UNI EN ISO 15015 (Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)) | 4 | chevron_right |
| UNI EN ISO 15527 UNI EN ISO 15527 (Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018)) | 4 | chevron_right |
| UNI EN ISO 15546 UNI EN ISO 15546 (Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011)) | 4 | chevron_right |
| UNI EN ISO 16120-2 UNI EN ISO 16120-2 (Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod) | 60 | chevron_right |
| UNI EN ISO 16120-3 UNI EN ISO 16120-3 (Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod) | 6 | chevron_right |
| UNI EN ISO 16120-4 UNI EN ISO 16120-4 (Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications) | 68 | chevron_right |
| UNI EN ISO 1622-1 UNI EN ISO 1622-1 (Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:2012)) | 7 | chevron_right |
| UNI EN ISO 16834 UNI EN ISO 16834 (Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)) | 47 | chevron_right |
| UNI EN ISO 17633 UNI EN ISO 17633 (Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2025)) | 94 | chevron_right |
| UNI EN ISO 17634 UNI EN ISO 17634 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)) | 23 | chevron_right |
| UNI EN ISO 17672 UNI EN ISO 17672 (Brazing - Filler metals) | 148 | chevron_right |
| UNI EN ISO 17777 UNI EN ISO 17777 (Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification) | 46 | chevron_right |
| UNI EN ISO 18273 UNI EN ISO 18273 (Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification) | 70 | chevron_right |
| UNI EN ISO 18274 UNI EN ISO 18274 (Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification) | 74 | chevron_right |
| UNI EN ISO 18276 UNI EN ISO 18276 (Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification (ISO 18276:2017)) | 28 | chevron_right |
| UNI EN ISO 1872-1 UNI EN ISO 1872-1 (Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993)) | 59 | chevron_right |
| UNI EN ISO 1873-1 UNI EN ISO 1873-1 (Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995)) | 18 | chevron_right |
| UNI EN ISO 1874-1 UNI EN ISO 1874-1 (Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1874-1:2010)) | 522 | chevron_right |
| UNI EN ISO 19288 UNI EN ISO 19288 (Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification) | 28 | chevron_right |
| UNI EN ISO 19598 UNI EN ISO 19598 (Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment) | 19 | chevron_right |
| UNI EN ISO 20378 UNI EN ISO 20378 (Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification) | 10 | chevron_right |
| UNI EN ISO 2081 UNI EN ISO 2081 (Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel) | 18 | chevron_right |
| UNI EN ISO 2082 UNI EN ISO 2082 (Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017)) | 18 | chevron_right |
| UNI EN ISO 21305-1 UNI EN ISO 21305-1 (Plastics - Polycarbonate (PC) molding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019)) | 7 | chevron_right |
| UNI EN ISO 2179 UNI EN ISO 2179 (Electroplated coatings of tin-nickel alloy - Specification and test methods (ISO 2179:1986)) | 4 | chevron_right |
| UNI EN ISO 22068 UNI EN ISO 22068 (Sintered-metal injection-moulded materials - Specifications) | 36 | chevron_right |
| UNI EN ISO 24023-1 UNI EN ISO 24023-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials, Part 1: Designation system and basis for specifications) | 2 | chevron_right |
| UNI EN ISO 24034 UNI EN ISO 24034 (Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification) | 72 | chevron_right |
| UNI EN ISO 24373 UNI EN ISO 24373 (Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification) | 56 | chevron_right |
| UNI EN ISO 2560 UNI EN ISO 2560 (Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification) | 96 | chevron_right |
| UNI EN ISO 2580-1 UNI EN ISO 2580-1 (Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002)) | 41 | chevron_right |
| UNI EN ISO 26304 UNI EN ISO 26304 (Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification) | 62 | chevron_right |
| UNI EN ISO 2702 UNI EN ISO 2702 (Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)) | 12 | chevron_right |
| UNI EN ISO 28941-1 UNI EN ISO 28941-1 (Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 28941-1:2008)) | 20 | chevron_right |
| UNI EN ISO 2897-1 UNI EN ISO 2897-1 (Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997)) | 12 | chevron_right |
| UNI EN ISO 2898-1 UNI EN ISO 2898-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996)) | 2 | chevron_right |
| UNI EN ISO 29988-1 UNI EN ISO 29988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 29988-1:2019)) | 22 | chevron_right |
| UNI EN ISO 3183 UNI EN ISO 3183 (Petroleum and natural gas industries - Steel pipe for pipeline transportation systems) | 220 | chevron_right |
| UNI EN ISO 3506-1 UNI EN ISO 3506-1 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)) | 40 | chevron_right |
| UNI EN ISO 3506-2 UNI EN ISO 3506-2 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes) | 80 | chevron_right |
| UNI EN ISO 3506-3 UNI EN ISO 3506-3 (Fasteners - Mechanical properties of corrosion resistant stainless steel fasteners - Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes) | 16 | chevron_right |
| UNI EN ISO 3506-4 UNI EN ISO 3506-4 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws with specified grades and hardness classes) | 28 | chevron_right |
| UNI EN ISO 3506-5 UNI EN ISO 3506-5 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications) | 9 | chevron_right |
| UNI EN ISO 3506-6 UNI EN ISO 3506-6 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)) | 41 | chevron_right |
| UNI EN ISO 3506-7 UNI EN ISO 3506-7 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 7: Flat washers with specified grades and property classes) | 18 | chevron_right |
| UNI EN ISO 4042 UNI EN ISO 4042 (Fasteners - Electroplated coating systems (ISO 4042:2022)) | 72 | chevron_right |
| UNI EN ISO 4613-1 UNI EN ISO 4613-1 (Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993)) | 52 | chevron_right |
| UNI EN ISO 4894-1 UNI EN ISO 4894-1 (Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997)) | 3 | chevron_right |
| UNI EN ISO 4957 UNI EN ISO 4957 (Tool steels) | 96 | chevron_right |
| UNI EN ISO 5451 UNI EN ISO 5451 (Ferrovanadium - Specification and conditions of delivery) | 6 | chevron_right |
| UNI EN ISO 5755 UNI EN ISO 5755 (Sintered metal materials. Specifications (ISO 5755:2022)) | 205 | chevron_right |
| UNI EN ISO 5832-1 UNI EN ISO 5832-1 (Implants for surgery - Metallic materials - Part 1: Wrought stainless steel) | 1 | chevron_right |
| UNI EN ISO 5832-2 UNI EN ISO 5832-2 (Implants for surgery - Metallic materials - Part 2: Unalloyed titanium) | 6 | chevron_right |
| UNI EN ISO 5832-3 UNI EN ISO 5832-3 (Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy) | 2 | chevron_right |
| UNI EN ISO 5832-6 UNI EN ISO 5832-6 (Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:2022)) | 1 | chevron_right |
| UNI EN ISO 5832-7 UNI EN ISO 5832-7 (Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy) | 1 | chevron_right |
| UNI EN ISO 636 UNI EN ISO 636 (Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification) | 37 | chevron_right |
| UNI EN ISO 6402-1 UNI EN ISO 6402-1 (Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 6402-1:2002)) | 25 | chevron_right |
| UNI EN ISO 6501 UNI EN ISO 6501 (Ferronickel - Specification and delivery requirements) | 5 | chevron_right |
| UNI EN ISO 683-1 UNI EN ISO 683-1 (Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering) | 28 | chevron_right |
| UNI EN ISO 683-17 UNI EN ISO 683-17 (Heat-treatable steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels) | 73 | chevron_right |
| UNI EN ISO 683-2 UNI EN ISO 683-2 (Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering) | 50 | chevron_right |
| UNI EN ISO 683-3 UNI EN ISO 683-3 (Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels) | 72 | chevron_right |
| UNI EN ISO 683-4 UNI EN ISO 683-4 (Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels) | 21 | chevron_right |
| UNI EN ISO 683-5 UNI EN ISO 683-5 (Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels) | 11 | chevron_right |
| UNI EN ISO 683-7 UNI EN ISO 683-7 (Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels) | 167 | chevron_right |
| UNI EN ISO 6848 UNI EN ISO 6848 (Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)) | 11 | chevron_right |
| UNI EN ISO 6931-1 UNI EN ISO 6931-1 (Stainless steels for springs - Part 1:Wire) | 16 | chevron_right |
| UNI EN ISO 7153-1 UNI EN ISO 7153-1 (Surgical instruments - Materials - Part 1: Metals) | 50 | chevron_right |
| UNI EN ISO 7391-1 UNI EN ISO 7391-1 (Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 60 | chevron_right |
| UNI EN ISO 7792-1 UNI EN ISO 7792-1 (Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7792-1:2012)) | 225 | chevron_right |
| UNI EN ISO 7823-1 UNI EN ISO 7823-1 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)) | 1 | chevron_right |
| UNI EN ISO 7823-2 UNI EN ISO 7823-2 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)) | 1 | chevron_right |
| UNI EN ISO 7823-3 UNI EN ISO 7823-3 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2001)) | 1 | chevron_right |
| UNI EN ISO 8257-1 UNI EN ISO 8257-1 (Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998)) | 37 | chevron_right |
| UNI EN ISO 898-1 UNI EN ISO 898-1 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013)) | 10 | chevron_right |
| UNI EN ISO 898-2 UNI EN ISO 898-2 (Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)) | 7 | chevron_right |
| UNI EN ISO 898-3 UNI EN ISO 898-3 (Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes) | 4 | chevron_right |
| UNI EN ISO 898-5 UNI EN ISO 898-5 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread) | 4 | chevron_right |
| UNI EN ISO 898-6 UNI EN ISO 898-6 (Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread) | 7 | chevron_right |
| UNI EN ISO 8986-1 UNI EN ISO 8986-1 (Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:2009)) | 16 | chevron_right |
| UNI EN ISO 9351 UNI EN ISO 9351 (Galvanic anodes for cathodic protection in seawater and saline sediments) | 13 | chevron_right |
| UNI EN ISO 9453 UNI EN ISO 9453 (Soft solder alloys - Chemical compositions and forms) | 177 | chevron_right |
| UNI EN ISO 9717 UNI EN ISO 9717 (Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)) | 3 | chevron_right |
| UNI EN ISO 9988-1 UNI EN ISO 9988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 9988-1:2004)) | 97 | chevron_right |
| UNI ENV 10080 UNI ENV 10080 (Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric) | 4 | chevron_right |
| UNI ISO 4381 UNI ISO 4381 (Plain bearings, Lead and tin casting alloys for multilayer plain bearings) | 7 | chevron_right |
| UNI ISO 4382-1 UNI ISO 4382-1 (Plain bearings, Copper alloys, Cast copper alloys for solid and multilayer thick - walled bearings) | 10 | chevron_right |
| UNI prEN 10138-2 UNI prEN 10138-2 (Prestressing steels - Part 2: wire) | 8 | chevron_right |
| UNI prEN 10138-3 UNI prEN 10138-3 (Prestressing steels - Part 3: strand) | 22 | chevron_right |
| UNI prEN 10138-4 UNI prEN 10138-4 (Prestressing steels - Part 4: bars) | 6 | chevron_right |
| UNI prEN 10268 UNI prEN 10268 (Cold rolled flat products higher yield strength for cold forming - Technical delivery conditions) | 19 | chevron_right |
| UNI prEN 10338 UNI prEN 10338 (Hot rolled and cold rolled non-coated flat products of multiphase steels for cold forming - Technical delivery conditions) | 4 | chevron_right |
| UNI SPERIMENTALE 3056 UNI SPERIMENTALE 3056 (Primary magnesium-aluminium alloy for casting. (Mg 10%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3057 UNI SPERIMENTALE 3057 (Primary magnesium-aluminium alloy for casting. (Mg 7%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3569 UNI SPERIMENTALE 3569 (Primary wrought aluminium-silicium-magnesium-alloy (Si 0.4% - Mg 0.7%)) | 3 | chevron_right |
| UNI SPERIMENTALE 3572 UNI SPERIMENTALE 3572 (Wrought primary aluminium-silicon- magnesium-copper-nickel alloy (Si 12%, Mg 1%, Cu 1%, Ni 0,8%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3578 UNI SPERIMENTALE 3578 (Primary wrought aluminium-copper-iron- magnesium-nickel alloy (Cu 3.5%, Fe 1.5%, Si 0.6%, Mg 0.65%, Ni 0.6%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3581 UNI SPERIMENTALE 3581 (Primary wrought aluminium-copper-silicium-manganese-magnesium-alloy (Cu 4.4% - Si 0.8% - Mn 0.8% - Mg 0.4%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3582 UNI SPERIMENTALE 3582 (Primary wrought aluminium-copper-silicium-manganese-magnesium-plated alloy (Cu 4.4% - Si 0.8% - Mn 0.8% - Mg 0.4%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3583 UNI SPERIMENTALE 3583 (Primary wrought aluminium-copper-magnesium-manganese-alloy (Cu 4.5%, Mg 1.5%, Mn 0.6 %)) | 2 | chevron_right |
| UNI SPERIMENTALE 3584 UNI SPERIMENTALE 3584 (Primary wrought aluminium-copper-magnesium-manganese-clad alloy (Cu 4.5%, Mg 1.5%, Mn 0.6%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3599 UNI SPERIMENTALE 3599 (Primary Aluminium-silicon-magnesium-manganese alloy for casting (Si 7% - Mg 0,3% - Mn 0.5%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3600 UNI SPERIMENTALE 3600 (Primary aluminium-silicon-copper- magnesium alloy for castings (Si 5%, Cu 1.3%, Mg 0.5%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3601 UNI SPERIMENTALE 3601 (Primary aluminium-silicon-copper alloy for castings (Si 8.5%, Cu 3.5%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3602 UNI SPERIMENTALE 3602 (Primary aluminium-zinc-magnesium-iron- titanium alloy for castings (Zn 5%, Mg 0.6%, Fe 1%, Ti 0.2%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3735 UNI SPERIMENTALE 3735 (Primary wrought aluminium-zinc-magnesium-copper alloy (Zn 5.8% - Mg 2.5% - Cu 1.6%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3736 UNI SPERIMENTALE 3736 (Primary wrought aluminium-zinc-magnesium-copper-clad alloy (Zn 5.8%, Mg 2.5%, Cu 1.6%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3737 UNI SPERIMENTALE 3737 (Primary wrought aluminium-zinc-magnesium-copper alloy (Zn 7.8%, Mg 2.5%, Cu 1.6%)) | 2 | chevron_right |
| UNI SPERIMENTALE 3738 UNI SPERIMENTALE 3738 (Primary wrought aluminium-zinc-magnesium-copper-clad alloy (Zn 7.8% - Mg 2.5% - Cu 1.6%)) | 2 | chevron_right |
| UNI SPERIMENTALE 5949 UNI SPERIMENTALE 5949 (Special unalloyed and alloyed steel seamless tubes. Tubes with law temperature impact test. Qualities, requirements and tests) | 5 | chevron_right |
| Wrought primary aluminium and aluminium alloys. Aluminium-zinc alloys | 1 | chevron_right |