PN
Standard · Poland · 1041 references
| Standard number | Materials | |
|---|---|---|
| PN CEN/TS 13388 PN CEN/TS 13388 (Copper and copper alloys - Compendium of compositions and products) | 802 | chevron_right |
| PN EN 10001 PN EN 10001 (Definition and classification of pig-irons) | 13 | chevron_right |
| PN EN 10016-2 PN EN 10016-2 (Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod) | 60 | chevron_right |
| PN EN 10016-3 PN EN 10016-3 (Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod) | 6 | chevron_right |
| PN EN 10016-4 PN EN 10016-4 (Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications) | 68 | chevron_right |
| PN EN 10025 PN EN 10025 (Hot rolled products of non-alloy structural steels; technical delivery conditions) | 60 | chevron_right |
| PN EN 10025-2 PN EN 10025-2 (Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels) | 58 | chevron_right |
| PN EN 10025-3 PN EN 10025-3 (Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels) | 16 | chevron_right |
| PN EN 10025-4 PN EN 10025-4 (Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels) | 20 | chevron_right |
| PN EN 10025-5 PN EN 10025-5 (Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance) | 38 | chevron_right |
| PN EN 10025-6 PN EN 10025-6 (Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition) | 41 | chevron_right |
| PN EN 10028-2 PN EN 10028-2 (Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties) | 34 | chevron_right |
| PN EN 10028-3 PN EN 10028-3 (Flat products made of steels for pressure purposes - Part 3: weldable fine grain steels, normalized) | 30 | chevron_right |
| PN EN 10028-4 PN EN 10028-4 (Flat products made of steels for pressure purposes - Part 4: nickel alloy steels with specified low temperature properties) | 15 | chevron_right |
| PN EN 10028-5 PN EN 10028-5 (Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled) | 18 | chevron_right |
| PN EN 10028-6 PN EN 10028-6 (Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered) | 32 | chevron_right |
| PN EN 10028-7 PN EN 10028-7 (Flat products made of steels for pressure purposes - Part 7: Stainless steels) | 128 | chevron_right |
| PN EN 10083-1 PN EN 10083-1 (Quenched and tempered steels - Part 1: Technical delivery conditions for special steels (includes amendment A1:1996)) | 100 | chevron_right |
| PN EN 10083-2 PN EN 10083-2 (Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels) | 57 | chevron_right |
| PN EN 10083-3 PN EN 10083-3 (Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels) | 56 | chevron_right |
| PN EN 10084 PN EN 10084 (Case hardening steels - Technical delivery conditions) | 72 | chevron_right |
| PN EN 10085 PN EN 10085 (Nitriding steels - Technical delivery conditions) | 18 | chevron_right |
| PN EN 10087 PN EN 10087 (Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods) | 34 | chevron_right |
| PN EN 10088-1 PN EN 10088-1 (Stainless steels - Part 1: List of stainless steels) | 433 | chevron_right |
| PN EN 10088-2 PN EN 10088-2 (Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes) | 215 | chevron_right |
| PN EN 10088-3 PN EN 10088-3 (Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes) | 227 | chevron_right |
| PN EN 10088-4 PN EN 10088-4 (Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes) | 86 | chevron_right |
| PN EN 10088-5 PN EN 10088-5 (Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes) | 84 | chevron_right |
| PN EN 10089 PN EN 10089 (Hot-rolled steels for quenched and tempered springs - Technical delivery conditions) | 38 | chevron_right |
| PN EN 10090 PN EN 10090 (Valve steels and alloys for internal combustion engines) | 20 | chevron_right |
| PN EN 10095 PN EN 10095 (Heat resisting steels and nickel alloys) | 53 | chevron_right |
| PN EN 10106 PN EN 10106 (Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state) | 70 | chevron_right |
| PN EN 10107 PN EN 10107 (Grain-oriented electrical steel sheet and strip delivered in the fully processed state) | 98 | chevron_right |
| PN EN 10111 PN EN 10111 (Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions) | 8 | chevron_right |
| PN EN 10113-2 PN EN 10113-2 (Hot-rolled products in weldable fine grain structural steels - Part 2: delivery conditions for normalized rolled steels) | 16 | chevron_right |
| PN EN 10113-3 PN EN 10113-3 (Hot-rolled products in weldable fine grain structural steels - Part 3: delivery conditions for thermomechanically rolled steels) | 16 | chevron_right |
| PN EN 10120 PN EN 10120 (Steel sheet and strip for welded gas cylinders) | 10 | chevron_right |
| PN EN 10126 PN EN 10126 (Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state) | 12 | chevron_right |
| PN EN 10130 PN EN 10130 (Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions) | 17 | chevron_right |
| PN EN 10132 PN EN 10132 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions) | 74 | chevron_right |
| PN EN 10132-2 PN EN 10132-2 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels) | 8 | chevron_right |
| PN EN 10132-3 PN EN 10132-3 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering) | 24 | chevron_right |
| PN EN 10132-4 PN EN 10132-4 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4: Spring steels and other applications) | 30 | chevron_right |
| PN EN 10137-2 PN EN 10137-2 (Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels) | 40 | chevron_right |
| PN EN 10137-3 PN EN 10137-3 (Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels) | 16 | chevron_right |
| PN EN 10139 PN EN 10139 (Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions) | 12 | chevron_right |
| PN EN 10142 PN EN 10142 (Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions) | 38 | chevron_right |
| PN EN 10147 PN EN 10147 (Continuously hot-dip zinc coated structural steels strip and sheet - Technical delivery conditions) | 46 | chevron_right |
| PN EN 10149-2 PN EN 10149-2 (Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels) | 22 | chevron_right |
| PN EN 10149-3 PN EN 10149-3 (Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels) | 8 | chevron_right |
| PN EN 10151 PN EN 10151 (Stainless steel strip for springs - Technical delivery conditions) | 20 | chevron_right |
| PN EN 10152 PN EN 10152 (Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions) | 16 | chevron_right |
| PN EN 10154 PN EN 10154 (Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions) | 20 | chevron_right |
| PN EN 10155 PN EN 10155 (Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions) | 18 | chevron_right |
| PN EN 10165 PN EN 10165 (Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state) | 16 | chevron_right |
| PN EN 10169-1 PN EN 10169-1 (Continuously organic coated (coil coated) steel flat products - Part 1: general information (definitions, materials, tolerances, test methods)) | 15 | chevron_right |
| PN EN 10202 PN EN 10202 (Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel) | 48 | chevron_right |
| PN EN 10203 PN EN 10203 (Cold reduced electrolytic tinplate) | 8 | chevron_right |
| PN EN 10205 PN EN 10205 (Cold reduced tinmill products - Blackplate) | 51 | chevron_right |
| PN EN 10207 PN EN 10207 (Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars) | 9 | chevron_right |
| PN EN 10208-1 PN EN 10208-1 (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A) | 10 | chevron_right |
| PN EN 10208-2 PN EN 10208-2 (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B) | 32 | chevron_right |
| PN EN 10209 PN EN 10209 (Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions) | 22 | chevron_right |
| PN EN 10210-1 PN EN 10210-1 (Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 28 | chevron_right |
| PN EN 10210-3 PN EN 10210-3 (Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels) | 96 | chevron_right |
| PN EN 10213 PN EN 10213 (Steel castings for pressure purposes) | 66 | chevron_right |
| PN EN 10213-2 PN EN 10213-2 (Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures) | 26 | chevron_right |
| PN EN 10213-3 PN EN 10213-3 (Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures) | 14 | chevron_right |
| PN EN 10213-4 PN EN 10213-4 (Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades) | 20 | chevron_right |
| PN EN 10214 PN EN 10214 (Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions) | 26 | chevron_right |
| PN EN 10215 PN EN 10215 (Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions) | 21 | chevron_right |
| PN EN 10216-1 PN EN 10216-1 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties) | 12 | chevron_right |
| PN EN 10216-2 PN EN 10216-2 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties) | 58 | chevron_right |
| PN EN 10216-3 PN EN 10216-3 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes) | 34 | chevron_right |
| PN EN 10216-4 PN EN 10216-4 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties) | 18 | chevron_right |
| PN EN 10216-5 PN EN 10216-5 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes) | 80 | chevron_right |
| PN EN 10217-1 PN EN 10217-1 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties) | 12 | chevron_right |
| PN EN 10217-2 PN EN 10217-2 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties) | 8 | chevron_right |
| PN EN 10217-3 PN EN 10217-3 (Welded steel tubes for pressure purposes - Technical delivery conditions -Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties) | 20 | chevron_right |
| PN EN 10217-4 PN EN 10217-4 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties) | 4 | chevron_right |
| PN EN 10217-5 PN EN 10217-5 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties) | 6 | chevron_right |
| PN EN 10217-6 PN EN 10217-6 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties) | 4 | chevron_right |
| PN EN 10217-7 PN EN 10217-7 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes) | 46 | chevron_right |
| PN EN 10219-1 PN EN 10219-1 (Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 40 | chevron_right |
| PN EN 10219-3 PN EN 10219-3 (Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels) | 88 | chevron_right |
| PN EN 10222-2 PN EN 10222-2 (Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties) | 34 | chevron_right |
| PN EN 10222-3 PN EN 10222-3 (Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties) | 10 | chevron_right |
| PN EN 10222-4 PN EN 10222-4 (Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength) | 26 | chevron_right |
| PN EN 10222-5 PN EN 10222-5 (Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels) | 60 | chevron_right |
| PN EN 10224 PN EN 10224 (Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions) | 6 | chevron_right |
| PN EN 10225 PN EN 10225 (Weldable structural steels for fixed offshore structures - Technical delivery conditions) | 96 | chevron_right |
| PN EN 10225-1 PN EN 10225-1 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates) | 22 | chevron_right |
| PN EN 10225-2 PN EN 10225-2 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 2: Sections) | 18 | chevron_right |
| PN EN 10225-3 PN EN 10225-3 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 3: Hot finished hollow sections) | 24 | chevron_right |
| PN EN 10225-4 PN EN 10225-4 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections) | 18 | chevron_right |
| PN EN 10248-1 PN EN 10248-1 (Hot-rolled steel sheet piles - Part 1: Technical delivery conditions) | 16 | chevron_right |
| PN EN 10249-1 PN EN 10249-1 (Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions) | 6 | chevron_right |
| PN EN 10250-2 PN EN 10250-2 (Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels) | 47 | chevron_right |
| PN EN 10250-3 PN EN 10250-3 (Open die steel forgings for general engineering purposes - Part 3: Alloy special steels) | 42 | chevron_right |
| PN EN 10250-4 PN EN 10250-4 (Open die steel forgings for general engineering purposes - Part 4: Stainless steels) | 70 | chevron_right |
| PN EN 10253-1 PN EN 10253-1 (Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements) | 2 | chevron_right |
| PN EN 10253-2 PN EN 10253-2 (Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements) | 64 | chevron_right |
| PN EN 10253-3 PN EN 10253-3 (Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements) | 50 | chevron_right |
| PN EN 10253-4 PN EN 10253-4 (Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements) | 50 | chevron_right |
| PN EN 10255 PN EN 10255 (Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions) | 2 | chevron_right |
| PN EN 10263-2 PN EN 10263-2 (Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working) | 18 | chevron_right |
| PN EN 10263-3 PN EN 10263-3 (Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels) | 50 | chevron_right |
| PN EN 10263-4 PN EN 10263-4 (Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering) | 72 | chevron_right |
| PN EN 10263-5 PN EN 10263-5 (Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels) | 38 | chevron_right |
| PN EN 10264-4 PN EN 10264-4 (Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire) | 10 | chevron_right |
| PN EN 10265 PN EN 10265 (Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation) | 32 | chevron_right |
| PN EN 10267 PN EN 10267 (Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures) | 20 | chevron_right |
| PN EN 10268 PN EN 10268 (Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions) | 47 | chevron_right |
| PN EN 10269 PN EN 10269 (Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties) | 88 | chevron_right |
| PN EN 10270-1 PN EN 10270-1 (Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire) | 5 | chevron_right |
| PN EN 10270-2 PN EN 10270-2 (Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire) | 12 | chevron_right |
| PN EN 10270-3 PN EN 10270-3 (Steel wire for mechanical springs - Part 3: Stainless spring steel wire) | 12 | chevron_right |
| PN EN 10271 PN EN 10271 (Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions) | 15 | chevron_right |
| PN EN 10272 PN EN 10272 (Stainless steel bars for pressure purposes) | 70 | chevron_right |
| PN EN 10273 PN EN 10273 (Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties) | 32 | chevron_right |
| PN EN 10277 PN EN 10277 (Bright steel products - Technical delivery conditions) | 169 | chevron_right |
| PN EN 10277-2 PN EN 10277-2 (Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes) | 29 | chevron_right |
| PN EN 10277-3 PN EN 10277-3 (Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels) | 34 | chevron_right |
| PN EN 10277-4 PN EN 10277-4 (Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels) | 20 | chevron_right |
| PN EN 10277-5 PN EN 10277-5 (Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering) | 34 | chevron_right |
| PN EN 10283 PN EN 10283 (Corrosion resistant steel castings) | 61 | chevron_right |
| PN EN 10292 PN EN 10292 (Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions) | 197 | chevron_right |
| PN EN 10293 PN EN 10293 (Steel castings for general engineering uses) | 66 | chevron_right |
| PN EN 10294-1 PN EN 10294-1 (Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels) | 10 | chevron_right |
| PN EN 10294-2 PN EN 10294-2 (Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties) | 20 | chevron_right |
| PN EN 10295 PN EN 10295 (Heat resistant steel castings) | 58 | chevron_right |
| PN EN 10296-1 PN EN 10296-1 (Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes) | 34 | chevron_right |
| PN EN 10296-2 PN EN 10296-2 (Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel) | 66 | chevron_right |
| PN EN 10297-1 PN EN 10297-1 (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes) | 62 | chevron_right |
| PN EN 10297-2 PN EN 10297-2 (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel) | 84 | chevron_right |
| PN EN 10302 PN EN 10302 (Creep resisting steels, nickel and cobalt alloys) | 70 | chevron_right |
| PN EN 10303 PN EN 10303 (Thin magnetic steel sheet and strip for use at medium frequencies) | 18 | chevron_right |
| PN EN 10304 PN EN 10304 (Magnetic materials (iron and steel) for use in relays) | 5 | chevron_right |
| PN EN 10305-1 PN EN 10305-1 (Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes) | 30 | chevron_right |
| PN EN 10305-2 PN EN 10305-2 (Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes) | 10 | chevron_right |
| PN EN 10305-3 PN EN 10305-3 (Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes) | 50 | chevron_right |
| PN EN 10305-4 PN EN 10305-4 (Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems) | 6 | chevron_right |
| PN EN 10305-5 PN EN 10305-5 (Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes) | 32 | chevron_right |
| PN EN 10305-6 PN EN 10305-6 (Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems) | 10 | chevron_right |
| PN EN 10323 PN EN 10323 (Steel wire and wire products - Bead wire) | 5 | chevron_right |
| PN EN 10324 PN EN 10324 (Steel wire and wire products - Hose reinforcement wire) | 3 | chevron_right |
| PN EN 10326 PN EN 10326 (Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions) | 56 | chevron_right |
| PN EN 10327 PN EN 10327 (Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions) | 84 | chevron_right |
| PN EN 10331 PN EN 10331 (Magnetic materials - Specification for sintered soft magnetic materials) | 14 | chevron_right |
| PN EN 10336 PN EN 10336 (Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming) | 50 | chevron_right |
| PN EN 10338 PN EN 10338 (Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions) | 73 | chevron_right |
| PN EN 10340 PN EN 10340 (Steel castings for structural uses) | 24 | chevron_right |
| PN EN 10341 PN EN 10341 (Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state) | 28 | chevron_right |
| PN EN 10343 PN EN 10343 (Steels for quenching and tempering for construction purposes - Technical delivery conditions) | 26 | chevron_right |
| PN EN 10346 PN EN 10346 (Continuously hot-dip coated steel flat products - Technical delivery conditions) | 485 | chevron_right |
| PN EN 10349 PN EN 10349 (Steel castings - Austenitic manganese steel castings) | 18 | chevron_right |
| PN EN 10378 PN EN 10378 (Welded stainless steel square and rectangular tubes for mechanical and structural engineering and decorative use - Technical delivery conditions) | 46 | chevron_right |
| PN EN 1044 PN EN 1044 (Brazing - Filler metals) | 184 | chevron_right |
| PN EN 1057 PN EN 1057 (Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications) | 2 | chevron_right |
| PN EN 1094-2 PN EN 1094-2 (Insulating refractory products - Part 2: Classification of shaped products (ISO 2245:1990 modified)) | 24 | chevron_right |
| PN EN 1172 PN EN 1172 (Copper and copper alloys - Sheet and strip for building purposes) | 12 | chevron_right |
| PN EN 1179 PN EN 1179 (Zinc an zinc alloys - Primary zinc) | 5 | chevron_right |
| PN EN 12070 PN EN 12070 (Welding consumables - Wire electrodes, wires and rods for arc welding of creep-resisting steels) | 63 | chevron_right |
| PN EN 12071 PN EN 12071 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels) | 8 | chevron_right |
| PN EN 12072 PN EN 12072 (Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels) | 39 | chevron_right |
| PN EN 12163 PN EN 12163 (Copper and copper alloys - Rod for general purposes) | 110 | chevron_right |
| PN EN 12164 PN EN 12164 (Copper and copper alloys - Rod for free machining purposes) | 90 | chevron_right |
| PN EN 12165 PN EN 12165 (Copper and copper alloys - Wrought and unwrought forging stock) | 126 | chevron_right |
| PN EN 12166 PN EN 12166 (Copper and copper alloys - Wire for general purposes) | 104 | chevron_right |
| PN EN 12167 PN EN 12167 (Copper and copper alloys - Profiles and bars for general purposes) | 142 | chevron_right |
| PN EN 12168 PN EN 12168 (Copper and copper alloys - Hollow rod for free machining purposes) | 64 | chevron_right |
| PN EN 12369-1 PN EN 12369-1 (Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards) | 11 | chevron_right |
| PN EN 12369-3 PN EN 12369-3 (Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels) | 3 | chevron_right |
| PN EN 12392 PN EN 12392 (Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment) | 94 | chevron_right |
| PN EN 12420 PN EN 12420 (Copper and copper alloys - Forgings) | 126 | chevron_right |
| PN EN 12421 PN EN 12421 (Magnesium and magnesium alloys - Unalloyed magnesium) | 23 | chevron_right |
| PN EN 12438 PN EN 12438 (Magnesium and magnesium alloys - Magnesium alloys for cast anodes) | 30 | chevron_right |
| PN EN 12449 PN EN 12449 (Copper and copper alloys - Seamless, round tubes for general purposes) | 94 | chevron_right |
| PN EN 12450 PN EN 12450 (Copper and copper alloys - Seamless, round copper capillary tubes) | 2 | chevron_right |
| PN EN 12451 PN EN 12451 (Copper and copper alloys - Seamless, round tubes for heat exchangers) | 16 | chevron_right |
| PN EN 12452 PN EN 12452 (Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers) | 10 | chevron_right |
| PN EN 12475-1 PN EN 12475-1 (Classification of dense shaped refractory products - Part 1: Alumina-silica products) | 13 | chevron_right |
| PN EN 12475-2 PN EN 12475-2 (Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon) | 31 | chevron_right |
| PN EN 12475-3 PN EN 12475-3 (Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 30% residual carbon) | 55 | chevron_right |
| PN EN 12475-4 PN EN 12475-4 (Classification of dense shaped refractory products - Part 4: Special products) | 80 | chevron_right |
| PN EN 12476 PN EN 12476 (Phosphate conversion coatings of metals - Method of specifying requirements) | 4 | chevron_right |
| PN EN 12496 PN EN 12496 (Galvanic anodes for cathodic protection in seawater and saline mud) | 10 | chevron_right |
| PN EN 12513 PN EN 12513 (Founding - Abrasion resistant cast irons) | 38 | chevron_right |
| PN EN 12516-4 PN EN 12516-4 (Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel) | 78 | chevron_right |
| PN EN 12535 PN EN 12535 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels) | 11 | chevron_right |
| PN EN 12536 PN EN 12536 (Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification) | 6 | chevron_right |
| PN EN 12548 PN EN 12548 (Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves) | 32 | chevron_right |
| PN EN 12588 PN EN 12588 (Lead and lead alloys - Rolled lead sheet for building purposes) | 1 | chevron_right |
| PN EN 12659 PN EN 12659 (Lead and lead alloys - Lead) | 8 | chevron_right |
| PN EN 12735-1 PN EN 12735-1 (Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems) | 4 | chevron_right |
| PN EN 12735-2 PN EN 12735-2 (Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment) | 2 | chevron_right |
| PN EN 12765 PN EN 12765 (Classification of thermosetting wood adhesive for non-structural applications) | 4 | chevron_right |
| PN EN 12844 PN EN 12844 (Zinc and zinc alloys - Castings - Specifications) | 16 | chevron_right |
| PN EN 12861 PN EN 12861 (Copper and copper alloys - Scrap) | 83 | chevron_right |
| PN EN 12952-2 PN EN 12952-2 (Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories) | 114 | chevron_right |
| PN EN 12953-2 PN EN 12953-2 (Shell boilers - Part 2: Materials for pressure parts of boilers and accessories) | 29 | chevron_right |
| PN EN 1301-2 PN EN 1301-2 (Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties) | 45 | chevron_right |
| PN EN 13148 PN EN 13148 (Copper and copper alloys - Hot-dip tinned strip) | 56 | chevron_right |
| PN EN 13195 PN EN 13195 (Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)) | 48 | chevron_right |
| PN EN 13195-1 PN EN 13195-1 (Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications) | 20 | chevron_right |
| PN EN 13261 PN EN 13261 (Railway applications - Wheelsets and bogies - Axles - Product requirements) | 3 | chevron_right |
| PN EN 13262 PN EN 13262 (Railway applications - Wheelsets and bogies - Wheels - Product requirements) | 5 | chevron_right |
| PN EN 13283 PN EN 13283 (Zinc and zinc alloys - Secondary zinc) | 3 | chevron_right |
| PN EN 13347 PN EN 13347 (Copper and copper alloys - Rod and wire for welding and braze welding) | 58 | chevron_right |
| PN EN 13348 PN EN 13348 (Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum) | 2 | chevron_right |
| PN EN 13353 PN EN 13353 (Solid wood panels (SWP) - Requirements) | 9 | chevron_right |
| PN EN 13445-2 PN EN 13445-2 (Unfired pressure vessels - Part 2: Materials) | 408 | chevron_right |
| PN EN 13445-6 PN EN 13445-6 (Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron) | 20 | chevron_right |
| PN EN 13445-8 PN EN 13445-8 (Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys) | 34 | chevron_right |
| PN EN 13480-2 PN EN 13480-2 (Metallic industrial piping - Part 2: Materials) | 406 | chevron_right |
| PN EN 13599 PN EN 13599 (Copper and copper alloys - Copper plate, sheet and strip for electrical purposes) | 16 | chevron_right |
| PN EN 13600 PN EN 13600 (Copper and copper alloys - Seamless copper tubes for electrical purposes) | 20 | chevron_right |
| PN EN 13601 PN EN 13601 (Copper and copper alloys - Copper rod, bar and wire for general electrical purposes) | 32 | chevron_right |
| PN EN 13602 PN EN 13602 (Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors) | 10 | chevron_right |
| PN EN 13604 PN EN 13604 (Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper) | 4 | chevron_right |
| PN EN 13605 PN EN 13605 (Copper and copper alloys - Copper profiles and profiled wire for electrical purposes) | 36 | chevron_right |
| PN EN 13674-1 PN EN 13674-1 (Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above) | 18 | chevron_right |
| PN EN 13674-2 PN EN 13674-2 (Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above) | 18 | chevron_right |
| PN EN 13674-3 PN EN 13674-3 (Railway applications - Track - Rail - Part 3: Check rails) | 6 | chevron_right |
| PN EN 13674-4 PN EN 13674-4 (Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m) | 15 | chevron_right |
| PN EN 13835 PN EN 13835 (Founding - Austenitic cast irons) | 36 | chevron_right |
| PN EN 1386 PN EN 1386 (Aluminium and aluminium alloys - Tread plate - Specifications) | 22 | chevron_right |
| PN EN 1396 PN EN 1396 (Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications) | 62 | chevron_right |
| PN EN 13981-1 PN EN 13981-1 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products) | 20 | chevron_right |
| PN EN 13981-2 PN EN 13981-2 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets) | 10 | chevron_right |
| PN EN 13981-3 PN EN 13981-3 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings) | 17 | chevron_right |
| PN EN 13981-4 PN EN 13981-4 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings) | 8 | chevron_right |
| PN EN 14121 PN EN 14121 (Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications) | 9 | chevron_right |
| PN EN 14286 PN EN 14286 (Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods) | 18 | chevron_right |
| PN EN 14436 PN EN 14436 (Copper and copper alloys - Electrolytically tinned strip) | 54 | chevron_right |
| PN EN 14700 PN EN 14700 (Welding consumables - Welding consumables for hard-facing) | 30 | chevron_right |
| PN EN 1561 PN EN 1561 (Founding - Grey cast irons) | 41 | chevron_right |
| PN EN 1562 PN EN 1562 (Founding - Malleable cast irons) | 42 | chevron_right |
| PN EN 1563 PN EN 1563 (Founding - Spheroidal graphite cast irons) | 93 | chevron_right |
| PN EN 1564 PN EN 1564 (Founding - Ausferritic spheroidal graphite cast irons) | 33 | chevron_right |
| PN EN 15776 PN EN 15776 (Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%) | 33 | chevron_right |
| PN EN 1592-2 PN EN 1592-2 (Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties) | 24 | chevron_right |
| PN EN 1599 PN EN 1599 (Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels) | 12 | chevron_right |
| PN EN 1600 PN EN 1600 (Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels) | 34 | chevron_right |
| PN EN 16079 PN EN 16079 (Founding - Compacted (vermicular) graphite cast irons) | 15 | chevron_right |
| PN EN 16124 PN EN 16124 (Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications) | 18 | chevron_right |
| PN EN 16482 PN EN 16482 (Founding - Continuous cast iron bars) | 62 | chevron_right |
| PN EN 1652 PN EN 1652 (Copper and copper alloys - Plate, sheet, strip and circles for general purposes) | 84 | chevron_right |
| PN EN 1653 PN EN 1653 (Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units) | 24 | chevron_right |
| PN EN 1654 PN EN 1654 (Copper and copper alloys - Strip for springs and connectors) | 40 | chevron_right |
| PN EN 1668 PN EN 1668 (Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels) | 8 | chevron_right |
| PN EN 1676 PN EN 1676 (Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications) | 101 | chevron_right |
| PN EN 16914 PN EN 16914 (Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions) | 2 | chevron_right |
| PN EN 1706 PN EN 1706 (Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties) | 103 | chevron_right |
| PN EN 1715-2 PN EN 1715-2 (Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications) | 18 | chevron_right |
| PN EN 1715-3 PN EN 1715-3 (Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)) | 49 | chevron_right |
| PN EN 1715-4 PN EN 1715-4 (Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications) | 20 | chevron_right |
| PN EN 1753 PN EN 1753 (Magnesium and magnesium alloys - Magnesium alloy ingots and castings) | 158 | chevron_right |
| PN EN 1758 PN EN 1758 (Copper and copper alloys - Strip for lead frames) | 6 | chevron_right |
| PN EN 1774 PN EN 1774 (Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid) | 8 | chevron_right |
| PN EN 197-1 PN EN 197-1 (Cement - Part 1: Composition, specifications and conformity criteria for common cements) | 162 | chevron_right |
| PN EN 1976 PN EN 1976 (Copper and copper alloys - Cast unwrought copper products) | 44 | chevron_right |
| PN EN 1977 PN EN 1977 (Copper and copper alloys - Copper drawing stock (wire rod)) | 36 | chevron_right |
| PN EN 1978 PN EN 1978 (Copper and copper alloys - Copper cathodes) | 4 | chevron_right |
| PN EN 1981 PN EN 1981 (Copper and copper alloys - Master alloys) | 78 | chevron_right |
| PN EN 1982 PN EN 1982 (Copper and copper alloys - Ingots and castings) | 206 | chevron_right |
| PN EN 2030 PN EN 2030 (Aerospace series-Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De ≤ 150 mm) | 2 | chevron_right |
| PN EN 2031 PN EN 2031 (Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars) | 2 | chevron_right |
| PN EN 204 PN EN 204 (Classification of thermoplastic wood adhesives for non-structural applications) | 4 | chevron_right |
| PN EN 2072 PN EN 2072 (Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2085 PN EN 2085 (Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| PN EN 2086 PN EN 2086 (Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a ≤ 150 mm) | 1 | chevron_right |
| PN EN 2087 PN EN 2087 (Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheets and strips 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2088 PN EN 2088 (Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2089 PN EN 2089 (Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 20898-1 PN EN 20898-1 (Mechanical properties of fasteners - Part 1: Bolts, screws and studs) | 10 | chevron_right |
| PN EN 20898-2 PN EN 20898-2 (Mechanical properties of fasteners - Part 2: Nuts with specified proof load values) | 8 | chevron_right |
| PN EN 20898-6 PN EN 20898-6 (Mechanical properties of fasteners - Part 6: Nuts with specified proof load values) | 7 | chevron_right |
| PN EN 2090 PN EN 2090 (Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2092 PN EN 2092 (Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2093 PN EN 2093 (Aerospace series - Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| PN EN 2094 PN EN 2094 (Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgings 3 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| PN EN 2100 PN EN 2100 (Aerospace series - Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D ≤ 200 mm) | 1 | chevron_right |
| PN EN 2104 PN EN 2104 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD) | 1 | chevron_right |
| PN EN 2114 PN EN 2114 (Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D ≤ 10 mm) | 1 | chevron_right |
| PN EN 2115 PN EN 2115 (Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D ≤ 10 mm No) | 1 | chevron_right |
| PN EN 2116 PN EN 2116 (Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D ≤ 10 mm No) | 1 | chevron_right |
| PN EN 2117 PN EN 2117 (Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D ≤ 10 mm) | 1 | chevron_right |
| PN EN 2119 PN EN 2119 (Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa) | 2 | chevron_right |
| PN EN 2125 PN EN 2125 (Aerospace series - Aluminium alloy Al-P16-T6151 - Plates - 6 mm < a ≤ 120 mm) | 1 | chevron_right |
| PN EN 2126 PN EN 2126 (Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| PN EN 2127 PN EN 2127 (Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D ≤ 100 mm) | 1 | chevron_right |
| PN EN 2128 PN EN 2128 (Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm ≤ a or D ≤ 75 mm) | 1 | chevron_right |
| PN EN 2135 PN EN 2135 (Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De ≤ 40 mm) | 1 | chevron_right |
| PN EN 2137 PN EN 2137 (Aerospace series - Steel FE-PL75 - 1 100 MPa ≤ Rm ≤ 1 250 MPa - Bars - De ≤ 100 mm) | 1 | chevron_right |
| PN EN 2174 PN EN 2174 (Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De ≤ 100 mm - Rm ≥ 850 MPa) | 2 | chevron_right |
| PN EN 2205 PN EN 2205 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| PN EN 2206 PN EN 2206 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa ≤ Rm ≤ 850 MPa - Bars - De ≤ 150 mm) | 2 | chevron_right |
| PN EN 2209 PN EN 2209 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheets, strips and plates - 0,5 mm ≤ a ≤ 20 mm) | 2 | chevron_right |
| PN EN 2213 PN EN 2213 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa) | 3 | chevron_right |
| PN EN 2221 PN EN 2221 (Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm ≤ a ≤ 55 mm) | 1 | chevron_right |
| PN EN 2222 PN EN 2222 (Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings) | 1 | chevron_right |
| PN EN 2226 PN EN 2226 (Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De ≤ 150 mm) | 2 | chevron_right |
| PN EN 2252 PN EN 2252 (Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa) | 3 | chevron_right |
| PN EN 2256 PN EN 2256 (Aerospace series - Aluminium alloy AL-P2618A - T852 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| PN EN 2259 PN EN 2259 (Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD) | 1 | chevron_right |
| PN EN 2260 PN EN 2260 (Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD) | 1 | chevron_right |
| PN EN 2261 PN EN 2261 (Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD) | 1 | chevron_right |
| PN EN 2262 PN EN 2262 (Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD) | 1 | chevron_right |
| PN EN 2278 PN EN 2278 (Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 150 mm) | 2 | chevron_right |
| PN EN 2279 PN EN 2279 (Aerospace series - Steel FE-PM37 - 900 MPa < Rm < 1 100 MPa - Forgings - De < 150 mm) | 1 | chevron_right |
| PN EN 2280 PN EN 2280 (Aerospace series - Steel FE-PM37 - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheet - a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2302 PN EN 2302 (Aerospace series - Heat-resisting nickel base alloy NiCr20Co3Fe3 - Rm ≥ 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm) | 1 | chevron_right |
| PN EN 2306 PN EN 2306 (Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars) | 1 | chevron_right |
| PN EN 2318 PN EN 2318 (Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm) | 1 | chevron_right |
| PN EN 2319 PN EN 2319 (Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a < 75 mm) | 1 | chevron_right |
| PN EN 2320 PN EN 2320 (Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a ≤ 75 mm) | 1 | chevron_right |
| PN EN 2321 PN EN 2321 (Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a ≤ 150 m) | 1 | chevron_right |
| PN EN 2326 PN EN 2326 (Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm) | 1 | chevron_right |
| PN EN 2381 PN EN 2381 (Aerospace series - Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| PN EN 2384 PN EN 2384 (Aerospace series - Aluminium alloy AL-P2014A T6511 - Extruded bars and sections a or D ≤ 150 mm) | 1 | chevron_right |
| PN EN 2385 PN EN 2385 (Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm) | 1 | chevron_right |
| PN EN 2387 PN EN 2387 (Aerospace series - Aluminium alloy 2014A - T6 - Tubes for structures - 0,6 mm < a < 12,5 mm) | 1 | chevron_right |
| PN EN 2390 PN EN 2390 (Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0.6 mm ≤ a ≤ 12.5 mm) | 1 | chevron_right |
| PN EN 2395 PN EN 2395 (Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2398 PN EN 2398 (Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for machined bolts - D ≤ 25 mm) | 2 | chevron_right |
| PN EN 2399 PN EN 2399 (Aerospace series. Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for forged bolts. D ≤ 25 mm) | 2 | chevron_right |
| PN EN 2400 PN EN 2400 (Aerospace series - Heat resisting nickel base alloy NI-P96-HT - Cold drawn and precipitation treated - Wire - D ≤ 10 mm) | 1 | chevron_right |
| PN EN 2402 PN EN 2402 (Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D ≤ 10 mm) | 1 | chevron_right |
| PN EN 2422 PN EN 2422 (Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm < a ≤ 120 mm) | 1 | chevron_right |
| PN EN 2428 PN EN 2428 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD) | 1 | chevron_right |
| PN EN 2429 PN EN 2429 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD) | 1 | chevron_right |
| PN EN 2430 PN EN 2430 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD) | 1 | chevron_right |
| PN EN 2431 PN EN 2431 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD) | 1 | chevron_right |
| PN EN 2432 PN EN 2432 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD) | 1 | chevron_right |
| PN EN 2438 PN EN 2438 (Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| PN EN 2439 PN EN 2439 (Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Forgings - De ≤ 40 mm) | 2 | chevron_right |
| PN EN 2446 PN EN 2446 (Aerospace series - Steel FE-PL1503 (35CrMo4) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 25 mm) | 2 | chevron_right |
| PN EN 2448 PN EN 2448 (Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| PN EN 2450 PN EN 2450 (Aerospace series - Steel 31NiMoCr10-5-3 1230 MPa ≤ Rm ≤ 1420 MPa - Bars - De ≤ 40 mm) | 1 | chevron_right |
| PN EN 2451 PN EN 2451 (Aerospace series - Steel 31NiMoCr10 - 5 - 3 - 1230 MPa ≤ Rm ≤ 1420 MPa - Forgings - De ≤ 40 mm) | 1 | chevron_right |
| PN EN 2460 PN EN 2460 (Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Bars - De ≤ 70 mm) | 2 | chevron_right |
| PN EN 2461 PN EN 2461 (Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Forgings - De ≤ 70 mm) | 2 | chevron_right |
| PN EN 2465 PN EN 2465 (Aerospace series - Steel X2CrNi18-9 - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bar for machining - 4 mm ≤ De ≤ 100 mm) | 2 | chevron_right |
| PN EN 2466 PN EN 2466 (Aerospace series - Steel FE-PA3901 (X2CrNi19-11) - Softened - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| PN EN 2467 PN EN 2467 (Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa) | 3 | chevron_right |
| PN EN 2468 PN EN 2468 (Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm ≤ a ≤ 5 mm) | 1 | chevron_right |
| PN EN 2469 PN EN 2469 (Aerospace series. Steel FE-PA3901 (X1CrNi18-10). Air melted. Softened. Wires. 0,4 mm ≤ D ≤ 12,5 mm. 450 MPa ≤ Rm ≤ 650 MPa) | 2 | chevron_right |
| PN EN 2470 PN EN 2470 (Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm ≤ D ≤ 10 mm) | 1 | chevron_right |
| PN EN 2475 PN EN 2475 (Aerospace series - Steel 30CrNiMo8 (1.6580) - Air melted - Hardened and tempered - Bar for machining - De ≤ 100 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| PN EN 2476 PN EN 2476 (Aerospace series - Steel 30CrNiMo8 (1.6580) - 1100 MPa ≤ Rm ≤ 1300 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| PN EN 2478 PN EN 2478 (Aerospace series - Steel FE-PL2107 (30NiCrMo16) - 1 220 MPa ≤ Rm ≤ 1 370 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| PN EN 2480 PN EN 2480 (Aerospace series - Steel 36NiCrMo16 (1.6773) - 1250 MPa ≤ Rm ≤ 1400 MPa - Bars - De ≤ 75 mm) | 2 | chevron_right |
| PN EN 2481 PN EN 2481 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Forgings - De ≤ 75 mm) | 2 | chevron_right |
| PN EN 2482 PN EN 2482 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 100 mm) | 2 | chevron_right |
| PN EN 2483 PN EN 2483 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| PN EN 2486 PN EN 2486 (Aerospace series - Aluminium alloy AL-P2618A - Forging stock) | 1 | chevron_right |
| PN EN 2502 PN EN 2502 (Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Bars) | 2 | chevron_right |
| PN EN 2503 PN EN 2503 (Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Forgings - De ≤ 150 mm) | 2 | chevron_right |
| PN EN 2510 PN EN 2510 (Aerospace series - Aluminium alloy 2024 - T42 - Drawn tubes for structural applications) | 1 | chevron_right |
| PN EN 2511 PN EN 2511 (Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm < a ≤ 100 mm) | 1 | chevron_right |
| PN EN 2512 PN EN 2512 (Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a ≤ 100 mm) | 1 | chevron_right |
| PN EN 2540 PN EN 2540 (Aerospace series - Steel X7CrNiAl17-7 (1.4568) - Air melted - Solution treated and precipitation hardened - Sheet and strip - a ≤ 6 mm - 1 240 MPa ≤ Rm ≤ 1 450 MPa) | 2 | chevron_right |
| PN EN 2541 PN EN 2541 (Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Wire for spring - D ≤ 4,0 mm) | 1 | chevron_right |
| PN EN 2542 PN EN 2542 (Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and wire - De ≤ 40 mm - For prevailing torque nuts) | 2 | chevron_right |
| PN EN 2543 PN EN 2543 (Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip - 0,3 mm ≤ a ≤ 2 mm - For prevailing torque nuts) | 2 | chevron_right |
| PN EN 2566 PN EN 2566 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD) | 1 | chevron_right |
| PN EN 2567 PN EN 2567 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD) | 1 | chevron_right |
| PN EN 2568 PN EN 2568 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD) | 1 | chevron_right |
| PN EN 2573 PN EN 2573 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Wires - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa) | 3 | chevron_right |
| PN EN 2630 PN EN 2630 (Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm with peripheral coarse grain control) | 1 | chevron_right |
| PN EN 2632 PN EN 2632 (Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| PN EN 2633 PN EN 2633 (Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control) | 1 | chevron_right |
| PN EN 2635 PN EN 2635 (Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bar and section - a or D ≤ 200 mm with peripheral coarse grain control) | 1 | chevron_right |
| PN EN 2636 PN EN 2636 (Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm with peripheral coarse grain control) | 1 | chevron_right |
| PN EN 2638 PN EN 2638 (Aerospace series - Aluminium alloy 2024-T3 - Extruded bar and section - 1,2 mm ≤ (a or D) ≤ 150 mm with coarse peripheral grain control) | 1 | chevron_right |
| PN EN 2681 PN EN 2681 (Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| PN EN 2684 PN EN 2684 (Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm < a ≤ 140 mm) | 1 | chevron_right |
| PN EN 26848 PN EN 26848 (Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding) | 9 | chevron_right |
| PN EN 2687 PN EN 2687 (Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| PN EN 26871 PN EN 26871 (Dentistry; dental base metal casting alloys (ISO 6871:1987)) | 1 | chevron_right |
| PN EN 2693 PN EN 2693 (Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2694 PN EN 2694 (Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2695 PN EN 2695 (Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2696 PN EN 2696 (Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2699 PN EN 2699 (Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm < D < 50 mm) | 1 | chevron_right |
| PN EN 2702 PN EN 2702 (Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Drawn or extruded bar and section - a or D ≤ 200 mm) | 1 | chevron_right |
| PN EN 2703 PN EN 2703 (Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2704 PN EN 2704 (Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Drawn bars - De ≤ 75 mm) | 1 | chevron_right |
| PN EN 2709 PN EN 2709 (Aerospace series - Aluminium alloy 2024 - T3510 - Bars and sections -1.2 mm ≤ (a or D) ≤ 150 mm - With peripheral coarse grain control) | 1 | chevron_right |
| PN EN 2726 PN EN 2726 (Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a ≤ 20 mm) | 1 | chevron_right |
| PN EN 2728 PN EN 2728 (Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a ≤ 20 mm) | 1 | chevron_right |
| PN EN 2731 PN EN 2731 (Aerospace series - Magnesium alloy MG-C46001 - T6 - Sand casting) | 1 | chevron_right |
| PN EN 2732 PN EN 2732 (Aerospace series - Magnesium alloy MG-C46001-T6 - Chill casting) | 1 | chevron_right |
| PN EN 2795 PN EN 2795 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD) | 1 | chevron_right |
| PN EN 2796 PN EN 2796 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD) | 1 | chevron_right |
| PN EN 2798 PN EN 2798 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD) | 1 | chevron_right |
| PN EN 2799 PN EN 2799 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD) | 1 | chevron_right |
| PN EN 2802 PN EN 2802 (Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2803 PN EN 2803 (Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 2813 PN EN 2813 (Aerospace series - Aluminium alloy AL-P-6061 - T6 - Drawn tube for pressure applications - 0,6 mm ≤ a ≤ 12,5 mm) | 1 | chevron_right |
| PN EN 2815 PN EN 2815 (Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 965 MPa) | 2 | chevron_right |
| PN EN 2816 PN EN 2816 (Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 965 MPa) | 2 | chevron_right |
| PN EN 2817 PN EN 2817 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1070 MPa) | 2 | chevron_right |
| PN EN 2818 PN EN 2818 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1070 MPa) | 2 | chevron_right |
| PN EN 2821 PN EN 2821 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - Rm ≥ 1310 MPa) | 3 | chevron_right |
| PN EN 2835 PN EN 2835 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 40 IRHD) | 1 | chevron_right |
| PN EN 2836 PN EN 2836 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD) | 1 | chevron_right |
| PN EN 2837 PN EN 2837 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD) | 1 | chevron_right |
| PN EN 2838 PN EN 2838 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD) | 1 | chevron_right |
| PN EN 2839 PN EN 2839 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD) | 1 | chevron_right |
| PN EN 2840 PN EN 2840 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD) | 1 | chevron_right |
| PN EN 2841 PN EN 2841 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 60 IRHD) | 1 | chevron_right |
| PN EN 2842 PN EN 2842 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 70 IRHD) | 1 | chevron_right |
| PN EN 2843 PN EN 2843 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD) | 1 | chevron_right |
| PN EN 2844 PN EN 2844 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IRHD) | 1 | chevron_right |
| PN EN 2845 PN EN 2845 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 50 IRHD) | 1 | chevron_right |
| PN EN 2846 PN EN 2846 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD) | 1 | chevron_right |
| PN EN 2847 PN EN 2847 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 70 IRHD) | 1 | chevron_right |
| PN EN 2848 PN EN 2848 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 80 IRHD) | 1 | chevron_right |
| PN EN 2849 PN EN 2849 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD) | 1 | chevron_right |
| PN EN 286-4 PN EN 286-4 (Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway folling stock) | 10 | chevron_right |
| PN EN 28839 PN EN 28839 (Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals) | 28 | chevron_right |
| PN EN 29453 PN EN 29453 (Soft solder alloys. Chemical compositions and forms) | 74 | chevron_right |
| PN EN 2947 PN EN 2947 (Aerospace series. Steel FE-PA3004 (X10CrNi18-09). Air melted. Non heat treated. Cold drawn wire. a or D ≤ 2,3 mm) | 2 | chevron_right |
| PN EN 2952 PN EN 2952 (Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1270 MPa ≤ Rm ≤ 1550 MPa) | 1 | chevron_right |
| PN EN 2959 PN EN 2959 (Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners 3 mm ≤ D ≤ 30 mm) | 2 | chevron_right |
| PN EN 2960 PN EN 2960 (Aerospace series - Heat resisting nickel base alloy (NI-P101HT), Cold worked and solution treated - Bars for machining for fasteners 3 mm ≤ D ≤ 50 mm) | 1 | chevron_right |
| PN EN 300 PN EN 300 (Oriented Strand Boards (OSB) - Definitions, classification and specifications) | 4 | chevron_right |
| PN EN 3018 PN EN 3018 (Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm) | 2 | chevron_right |
| PN EN 3115 PN EN 3115 (Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D ≤ 10 mm) | 1 | chevron_right |
| PN EN 312 PN EN 312 (Particleboards - Specifications) | 7 | chevron_right |
| PN EN 3120 PN EN 3120 (Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress relieved - Seamless tube for pressure systems - 4 mm ≤ D ≤ 51 mm - 690 MPa ≤ Rm ≤ 1 030 MPa) | 1 | chevron_right |
| PN EN 3160 PN EN 3160 (Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1310 MPa) | 2 | chevron_right |
| PN EN 3161 PN EN 3161 (Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa) | 2 | chevron_right |
| PN EN 3162 PN EN 3162 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 930 MPa) | 3 | chevron_right |
| PN EN 3163 PN EN 3163 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| PN EN 3219 PN EN 3219 (Aerospace series - Heat resisting nickel base alloy (NI-P100HT) - Cold worked and softened - Bar and wire for continuous forging extrusion for fasteners - 3 mm ≤ D ≤ 30 mm) | 1 | chevron_right |
| PN EN 3220 PN EN 3220 (Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ≤ D ≤ 30 mm) | 1 | chevron_right |
| PN EN 3310 PN EN 3310 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Not heat treated - Forging stock, for annealed forgings - De ≤ 360 mm) | 2 | chevron_right |
| PN EN 3311 PN EN 3311 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar for machining - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1160 MPa) | 2 | chevron_right |
| PN EN 3312 PN EN 3312 (Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Forgings De ≤ 150 mm) | 2 | chevron_right |
| PN EN 3314 PN EN 3314 (Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D ≤ 75 mm) | 1 | chevron_right |
| PN EN 3315 PN EN 3315 (Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - De ≤ 75 mm) | 2 | chevron_right |
| PN EN 3329 PN EN 3329 (Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts) | 2 | chevron_right |
| PN EN 3330 PN EN 3330 (Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealead - Bar and wire - De ≤ 40 mm - For prevailing torque nuts) | 2 | chevron_right |
| PN EN 3332 PN EN 3332 (Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 3333 PN EN 3333 (Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 3335 PN EN 3335 (Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 3338 PN EN 3338 (Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| PN EN 3339 PN EN 3339 (Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a ≤ 200 mm) | 1 | chevron_right |
| PN EN 3341 PN EN 3341 (Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 3342 PN EN 3342 (Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D ≤ 150 mm) | 1 | chevron_right |
| PN EN 3344 PN EN 3344 (Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| PN EN 3347 PN EN 3347 (Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| PN EN 3351 PN EN 3351 (Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De ≤ 150 mm) | 1 | chevron_right |
| PN EN 3354 PN EN 3354 (Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Sheet for superplastic forming. a ≤ 6 mm) | 2 | chevron_right |
| PN EN 3355 PN EN 3355 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa) | 2 | chevron_right |
| PN EN 3357 PN EN 3357 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 150 mm - 1 200 MPa ≤ Rm ≤ 1 400 MPa) | 2 | chevron_right |
| PN EN 3358 PN EN 3358 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 150 mm - Rm ≥ 1400 MPa) | 2 | chevron_right |
| PN EN 3359 PN EN 3359 (Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Vacuum induction melted and consumable electrode remelted - softened - forging stocks - a or D ≤ 300 mm) | 3 | chevron_right |
| PN EN 3361 PN EN 3361 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6mm - 1070 MPa ≤ Rm ≤ 1220 MPa) | 3 | chevron_right |
| PN EN 3364 PN EN 3364 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted, softened - Forging stocks - a or D ≤ 300 mm) | 3 | chevron_right |
| PN EN 3365 PN EN 3365 (Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted, softened - forging stock - a or D ≤ 300 mm) | 3 | chevron_right |
| PN EN 3378 PN EN 3378 (Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets - 1,6 mm ≤ D ≤ 10 mm) | 1 | chevron_right |
| PN EN 3451 PN EN 3451 (Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock, for annealed forgings - a or D ≤ 300 mm) | 1 | chevron_right |
| PN EN 3456 PN EN 3456 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled - a ≤ 6 mm) | 2 | chevron_right |
| PN EN 3459 PN EN 3459 (Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a ≤ 50 mm) | 2 | chevron_right |
| PN EN 3460 PN EN 3460 (Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D ≤ 150 - Rm ≥ 390 MPa) | 1 | chevron_right |
| PN EN 3464 PN EN 3464 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm) | 2 | chevron_right |
| PN EN 3468 PN EN 3468 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 MPa ≤ Rm ≤ 700 MPa - Forgings - De ≤ 100 mm) | 3 | chevron_right |
| PN EN 3469 PN EN 3469 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa) | 2 | chevron_right |
| PN EN 3470 PN EN 3470 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1200 MPa ≤ Rm ≤ 1400 MPa) | 2 | chevron_right |
| PN EN 3471 PN EN 3471 (Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Strip for spring - a ≤ 4,0 mm) | 1 | chevron_right |
| PN EN 3474 PN EN 3474 (Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 3476 PN EN 3476 (Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Softened. Forging stock. a or D ≤ 300 mm) | 2 | chevron_right |
| PN EN 3479 PN EN 3479 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa) | 3 | chevron_right |
| PN EN 3480 PN EN 3480 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Plates - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| PN EN 3481 PN EN 3481 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Hollow bars - 5 mm ≤ a ≤ 12 mm) | 3 | chevron_right |
| PN EN 3482 PN EN 3482 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Forging stock - De ≤ 100 mm) | 3 | chevron_right |
| PN EN 3484 PN EN 3484 (Aerospace series - Steel X5CrNiCuNb16-4 (1.4549 type 1.4542) - As cast - Reference heat treatment: homogenised, solution treated, precipitation hardened and sub zero - Remelting stock) | 3 | chevron_right |
| PN EN 3486 PN EN 3486 (Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Solution annealed and precipitation hardened - 1400 ≤ Rm ≤ 1550 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| PN EN 3487 PN EN 3487 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| PN EN 3488 PN EN 3488 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Sheets and strips - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| PN EN 3489 PN EN 3489 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 ≤ Rm ≤ 750 MPa - Tubes for structures - 0.5 ≤ a ≤ 5 mm) | 3 | chevron_right |
| PN EN 3490 PN EN 3490 (Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted - Hardened and tempered - Bars for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 3 | chevron_right |
| PN EN 3491 PN EN 3491 (Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 2 | chevron_right |
| PN EN 3507 PN EN 3507 (Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa) | 2 | chevron_right |
| PN EN 3510 PN EN 3510 (Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm) | 2 | chevron_right |
| PN EN 3523 PN EN 3523 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars for machining - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa) | 3 | chevron_right |
| PN EN 3524 PN EN 3524 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm ≤ a ≤ 6 mm - 1080 MPa ≤ Rm ≤ 1280 MPa) | 2 | chevron_right |
| PN EN 3525 PN EN 3525 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm ≤ a ≤ 20 mm - 1080 MPa ≤ Rm ≤ 1280 MPa) | 2 | chevron_right |
| PN EN 3526 PN EN 3526 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1180 MPa) | 2 | chevron_right |
| PN EN 3527 PN EN 3527 (Aerospace series - Steel 33CrMoV12 (1.8522) - Air melted - Softened - Forging stock - a or D ≤ 300 mm) | 3 | chevron_right |
| PN EN 3528 PN EN 3528 (Aerospace series. Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 2 | chevron_right |
| PN EN 3529 PN EN 3529 (Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 2 | chevron_right |
| PN EN 3531 PN EN 3531 (Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 3 | chevron_right |
| PN EN 3532 PN EN 3532 (Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 3 | chevron_right |
| PN EN 3552 PN EN 3552 (Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 3553 PN EN 3553 (Aerospace series - Aluminium alloy AL-P2618A - T6511 - Extruded bar and section - a or D ≤ 160 mm) | 1 | chevron_right |
| PN EN 3557 PN EN 3557 (Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications - 0,6 mm ≤ a ≤ 3 mm) | 1 | chevron_right |
| PN EN 3638 PN EN 3638 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets, strips and plates - 0,5 ≤ a ≤ 10 mm) | 3 | chevron_right |
| PN EN 3639 PN EN 3639 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 3 | chevron_right |
| PN EN 3666 PN EN 3666 (Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1550 MPa ≤ Rm ≤ 1830 MPa) | 1 | chevron_right |
| PN EN 3668 PN EN 3668 (Aerospace series. Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9). Non heat treated. Forging stock. a or D ≤ 250 mm) | 2 | chevron_right |
| PN EN 3671 PN EN 3671 (Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D ≤ 250 mm) | 2 | chevron_right |
| PN EN 3677 PN EN 3677 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa) | 3 | chevron_right |
| PN EN 3678 PN EN 3678 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa) | 3 | chevron_right |
| PN EN 3697 PN EN 3697 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD) | 1 | chevron_right |
| PN EN 3698 PN EN 3698 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD) | 1 | chevron_right |
| PN EN 3761 PN EN 3761 (Aerospace series - Heat resisting alloy FE-PA2601 - Softened and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1100 MPa ≤ Rm ≤ 1300 MPa) | 1 | chevron_right |
| PN EN 3762 PN EN 3762 (Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold worked - Wire for forged fasteners - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| PN EN 3813 PN EN 3813 (Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. De ≤ 50 mm) | 2 | chevron_right |
| PN EN 3816 PN EN 3816 (Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened and cold rolled - Sheet and strip a ≤ 3 mm - Rm ≥ 800 MPa) | 2 | chevron_right |
| PN EN 3825 PN EN 3825 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD) | 1 | chevron_right |
| PN EN 3826 PN EN 3826 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD) | 1 | chevron_right |
| PN EN 3827 PN EN 3827 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD) | 1 | chevron_right |
| PN EN 3872 PN EN 3872 (Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a ≤ 200 mm) | 1 | chevron_right |
| PN EN 3882 PN EN 3882 (Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3883 PN EN 3883 (Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3884 PN EN 3884 (Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3885 PN EN 3885 (Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3886 PN EN 3886 (Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3887 PN EN 3887 (Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3888 PN EN 3888 (Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3889 PN EN 3889 (Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3890 PN EN 3890 (Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3892 PN EN 3892 (Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding) | 1 | chevron_right |
| PN EN 3893 PN EN 3893 (Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding) | 1 | chevron_right |
| PN EN 3894 PN EN 3894 (Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3895 PN EN 3895 (Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3896 PN EN 3896 (Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding) | 2 | chevron_right |
| PN EN 3897 PN EN 3897 (Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding) | 2 | chevron_right |
| PN EN 39 PN EN 39 (Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions) | 2 | chevron_right |
| PN EN 3917 PN EN 3917 (Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3918 PN EN 3918 (Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Tape) | 2 | chevron_right |
| PN EN 3919 PN EN 3919 (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| PN EN 3920 PN EN 3920 (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3921 PN EN 3921 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| PN EN 3922 PN EN 3922 (Aerospace series - Nickel base alloy Ni-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| PN EN 3923 PN EN 3923 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3924 PN EN 3924 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| PN EN 3925 PN EN 3925 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| PN EN 3926 PN EN 3926 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| PN EN 3927 PN EN 3927 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3928 PN EN 3928 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| PN EN 3930 PN EN 3930 (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3931 PN EN 3931 (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Tape) | 2 | chevron_right |
| PN EN 3932 PN EN 3932 (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| PN EN 3933 PN EN 3933 (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3934 PN EN 3934 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| PN EN 3935 PN EN 3935 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| PN EN 3936 PN EN 3936 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3937 PN EN 3937 (Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3938 PN EN 3938 (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| PN EN 3939 PN EN 3939 (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3940 PN EN 3940 (Aerospace series - Nickel base alloy NI-B46001 (NiCoSi5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| PN EN 3941 PN EN 3941 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| PN EN 3942 PN EN 3942 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| PN EN 3943 PN EN 3943 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3944 PN EN 3944 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| PN EN 3945 PN EN 3945 (Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3946 PN EN 3946 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3947 PN EN 3947 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| PN EN 3948 PN EN 3948 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Wire) | 2 | chevron_right |
| PN EN 3952 PN EN 3952 (Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire) | 2 | chevron_right |
| PN EN 3953 PN EN 3953 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire) | 2 | chevron_right |
| PN EN 3954 PN EN 3954 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3955 PN EN 3955 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| PN EN 3956 PN EN 3956 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire) | 2 | chevron_right |
| PN EN 3957 PN EN 3957 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3958 PN EN 3958 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| PN EN 3959 PN EN 3959 (Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3960 PN EN 3960 (Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| PN EN 3961 PN EN 3961 (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| PN EN 3962 PN EN 3962 (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire) | 2 | chevron_right |
| PN EN 3963 PN EN 3963 (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Rolled foil) | 1 | chevron_right |
| PN EN 3964 PN EN 3964 (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Wire) | 1 | chevron_right |
| PN EN 3965 PN EN 3965 (Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing - Rolled foil) | 1 | chevron_right |
| PN EN 3969 PN EN 3969 (Aerospace series. Steel FE-PL1507 (40CrMoV12). Air melted. Annealed. Forging stock. a or D ≤ 350 mm) | 2 | chevron_right |
| PN EN 3971 PN EN 3971 (Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm) | 2 | chevron_right |
| PN EN 3972 PN EN 3972 (Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa) | 2 | chevron_right |
| PN EN 3973 PN EN 3973 (Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa) | 2 | chevron_right |
| PN EN 3979 PN EN 3979 (Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 3982 PN EN 3982 (Aerospace series - Aluminium alloy AL-P7050 - AlZn6CuMgZr - T7451 - Plates - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| PN EN 3983 PN EN 3983 (Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| PN EN 3997 PN EN 3997 (Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T3 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 3998 PN EN 3998 (Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 3999 PN EN 3999 (Aerospace series - Aluminium alloy AL-P2024-T351 - Sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4001 PN EN 4001 (Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4002 PN EN 4002 (Aerospace series. Aluminium alloy AL-P2219-T81. Sheet and strip 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4003 PN EN 4003 (Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4004 PN EN 4004 (Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4005 PN EN 4005 (Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4006 PN EN 4006 (Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4007 PN EN 4007 (Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4085 PN EN 4085 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| PN EN 4098 PN EN 4098 (Aerospace series - Steel 40CrMoV12 (1.8523) - Consumable electrode remelted - Hardened and tempered - Forgings - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa) | 3 | chevron_right |
| PN EN 4099 PN EN 4099 (Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4100 PN EN 4100 (Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4101 PN EN 4101 (Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4102 PN EN 4102 (Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4103 PN EN 4103 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| PN EN 4104 PN EN 4104 (Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing - Powder or paste) | 1 | chevron_right |
| PN EN 4105 PN EN 4105 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape) | 2 | chevron_right |
| PN EN 4202 PN EN 4202 (Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm < a ≤ 25 mm) | 1 | chevron_right |
| PN EN 4203 PN EN 4203 (Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4204 PN EN 4204 (Aerospace series - Aluminium alloy AL-P8090 - T841 - Sheet - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4209 PN EN 4209 (Aerospace series - Aluminium alloy AL-P2219-T851 - Plate - 6 mm < a ≤ 50 mm) | 1 | chevron_right |
| PN EN 4211 PN EN 4211 (Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6 mm < a ≤ 25 mm) | 1 | chevron_right |
| PN EN 4212 PN EN 4212 (Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| PN EN 4213 PN EN 4213 (Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| PN EN 4214 PN EN 4214 (Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm < a ≤ 20 mm) | 1 | chevron_right |
| PN EN 4215 PN EN 4215 (Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| PN EN 4216 PN EN 4216 (Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa) | 2 | chevron_right |
| PN EN 4244 PN EN 4244 (Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D 200 mm - 1 000 MPa Rm 1 140 MPa) | 1 | chevron_right |
| PN EN 4245 PN EN 4245 (Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - As forged - Forging stock - De 300 mm) | 1 | chevron_right |
| PN EN 4247 PN EN 4247 (Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm < a ≤ 140 mm) | 1 | chevron_right |
| PN EN 4250 PN EN 4250 (Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| PN EN 4262 PN EN 4262 (Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880 MPa) | 2 | chevron_right |
| PN EN 4263 PN EN 4263 (Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960 MPa) | 2 | chevron_right |
| PN EN 4264 PN EN 4264 (Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 - As forged - Forging stock - a or D ≤ 200 mm) | 2 | chevron_right |
| PN EN 4283 PN EN 4283 (Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm < a ≤ 40 mm) | 1 | chevron_right |
| PN EN 4286 PN EN 4286 (Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a ≤ 125 mm) | 1 | chevron_right |
| PN EN 4287 PN EN 4287 (Aerospace series - Aluminium alloy AL-P7010 - Forging stock) | 1 | chevron_right |
| PN EN 4289 PN EN 4289 (Aerospace series - Aluminium alloy AL-P7175- Forging stock) | 1 | chevron_right |
| PN EN 4291 PN EN 4291 (Aerospace series - Aluminium alloy AL-P8090 - Forging stock) | 1 | chevron_right |
| PN EN 4292 PN EN 4292 (Aerospace series - Aluminium alloy AL-R39002 - Forging stock) | 1 | chevron_right |
| PN EN 4293 PN EN 4293 (Aerospce series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D ≤ 150 mm) | 1 | chevron_right |
| PN EN 4313 PN EN 4313 (Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4314 PN EN 4314 (Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4680) - Consumable electrode remelted - Not heat treated - Forging stock - a or D ≤ 250 mm) | 3 | chevron_right |
| PN EN 4315 PN EN 4315 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - a or D ≤ 100 mm - Rm ≥ 900 MPa) | 3 | chevron_right |
| PN EN 4317 PN EN 4317 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Not heat treated - Forging stock - a or D ≤ 200 mm) | 3 | chevron_right |
| PN EN 4318 PN EN 4318 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm - Rm ≥ 960 MPa) | 3 | chevron_right |
| PN EN 4324 PN EN 4324 (Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod) | 1 | chevron_right |
| PN EN 4325 PN EN 4325 (Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4326 PN EN 4326 (Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4327 PN EN 4327 (Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4328 PN EN 4328 (Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4329 PN EN 4329 (Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4330 PN EN 4330 (Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4331 PN EN 4331 (Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4332 PN EN 4332 (Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4333 PN EN 4333 (Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4334 PN EN 4334 (Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4335 PN EN 4335 (Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4336 PN EN 4336 (Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4337 PN EN 4337 (Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn3) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4338 PN EN 4338 (Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4339 PN EN 4339 (Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4340 PN EN 4340 (Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| PN EN 4341 PN EN 4341 (Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| PN EN 4342 PN EN 4342 (Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| PN EN 4343 PN EN 4343 (Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4344 PN EN 4344 (Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4346 PN EN 4346 (Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm) | 2 | chevron_right |
| PN EN 4347 PN EN 4347 (Aerospace series Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm) | 2 | chevron_right |
| PN EN 4372 PN EN 4372 (Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D ≤ 10 mm) | 2 | chevron_right |
| PN EN 4373 PN EN 4373 (Aerospace series. Heat resisting alloy NI-PD9001 (NiCu31). Annealed, seamless tube D ≤ 75 mm, a ≤ 3 mm) | 2 | chevron_right |
| PN EN 4374 PN EN 4374 (Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - De ≤ 200 mm) | 2 | chevron_right |
| PN EN 4376 PN EN 4376 (Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated - Bar and section, De ≤ 200 mm) | 2 | chevron_right |
| PN EN 4377 PN EN 4377 (Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| PN EN 4379 PN EN 4379 (Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De ≤ 200 mm) | 2 | chevron_right |
| PN EN 4382 PN EN 4382 (Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D ≤ 50 mm, a ≤ 3 mm) | 2 | chevron_right |
| PN EN 4383 PN EN 4383 (Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock) | 2 | chevron_right |
| PN EN 4384 PN EN 4384 (Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock) | 2 | chevron_right |
| PN EN 440 PN EN 440 (Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification) | 10 | chevron_right |
| PN EN 4449 PN EN 4449 (Aerospace series - Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4450 PN EN 4450 (Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| PN EN 4461 PN EN 4461 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa) | 2 | chevron_right |
| PN EN 4462 PN EN 4462 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa) | 2 | chevron_right |
| PN EN 4463 PN EN 4463 (Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| PN EN 4464 PN EN 4464 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 200 MPa) | 2 | chevron_right |
| PN EN 4465 PN EN 4465 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 300 MPa) | 2 | chevron_right |
| PN EN 4466 PN EN 4466 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 400 MPa) | 2 | chevron_right |
| PN EN 4467 PN EN 4467 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa) | 2 | chevron_right |
| PN EN 4468 PN EN 4468 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa) | 2 | chevron_right |
| PN EN 4469 PN EN 4469 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| PN EN 4470 PN EN 4470 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1200 MPa) | 2 | chevron_right |
| PN EN 4471 PN EN 4471 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1300 MPa) | 2 | chevron_right |
| PN EN 4472 PN EN 4472 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| PN EN 4528 PN EN 4528 (Aerospace series. Steel FE-PA 3903 (X10CrNi18-8) - Cold rolled - Strip for springs. a ≤ 3 mm. 1250 MPa ≤ Rm ≤ 1640 MPa) | 2 | chevron_right |
| PN EN 4566 PN EN 4566 (Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| PN EN 4570 PN EN 4570 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 Solution treated Forgings De ≤ 100 mm) | 2 | chevron_right |
| PN EN 4571 PN EN 4571 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Bars and sections - De = 100 mm) | 2 | chevron_right |
| PN EN 4572 PN EN 4572 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Sheets and strips - a ≤ 3 mm) | 2 | chevron_right |
| PN EN 4573 PN EN 4573 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm) | 2 | chevron_right |
| PN EN 4574 PN EN 4574 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| PN EN 4575 PN EN 4575 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and descaled - Sheets and plates - 3 mm < a ≤ 50 mm) | 2 | chevron_right |
| PN EN 4615 PN EN 4615 (Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting) | 1 | chevron_right |
| PN EN 4616 PN EN 4616 (Aerospace series - Magnesium alloy MG-C18002 - T4 - Chill casting) | 1 | chevron_right |
| PN EN 4627 PN EN 4627 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 3 | chevron_right |
| PN EN 4628 PN EN 4628 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| PN EN 4629 PN EN 4629 (Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De ≤ 300 mm) | 2 | chevron_right |
| PN EN 4630 PN EN 4630 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 3 | chevron_right |
| PN EN 4631 PN EN 4631 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 3 | chevron_right |
| PN EN 4642 PN EN 4642 (Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 2 | chevron_right |
| PN EN 4655 PN EN 4655 (Aerospace series. Steel FEPM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| PN EN 4656 PN EN 4656 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1520 MPa) | 2 | chevron_right |
| PN EN 4657 PN EN 4657 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation remelted - Bars - a or D < 200 mm - Rm > 1 650 MPa) | 2 | chevron_right |
| PN EN 4658 PN EN 4658 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 520 MPa) | 2 | chevron_right |
| PN EN 4659 PN EN 4659 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 650 Mpa) | 2 | chevron_right |
| PN EN 4670 PN EN 4670 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| PN EN 4671 PN EN 4671 (Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1400 MPa) | 2 | chevron_right |
| PN EN 4672 PN EN 4672 (Aerospace series - Steel FE-PM1504 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| PN EN 4675 PN EN 4675 (Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Bars - De < 110 mm) | 2 | chevron_right |
| PN EN 4683 PN EN 4683 (Aerospace series - Steel FE-WM 3504 (X4CrNiMo16-5-1) - Air melted - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| PN EN 4685 PN EN 4685 (Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 mm - Rm ≥ 1 240 MPa) | 1 | chevron_right |
| PN EN 4720 PN EN 4720 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| PN EN 4721 PN EN 4721 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 2 | chevron_right |
| PN EN 4725 PN EN 4725 (Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm < a ≤ 150 mm) | 1 | chevron_right |
| PN EN 4825 PN EN 4825 (Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consumable electrode remelted - Hardened and tempered - Bars - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1100 MPa) | 2 | chevron_right |
| PN EN 4842 PN EN 4842 (Aerospace series - X5CrNiCu15-5 (1.4545)- Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining, a or D ≤ 250 mm, 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)) | 2 | chevron_right |
| PN EN 485-2 PN EN 485-2 (Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties) | 110 | chevron_right |
| PN EN 486 PN EN 486 (Aluminium and aluminium alloys - Extrusion ingots - Specifications) | 444 | chevron_right |
| PN EN 487 PN EN 487 (Aluminium and aluminium alloys - Rolling ingots - Specifications) | 184 | chevron_right |
| PN EN 4882 PN EN 4882 (Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa) | 2 | chevron_right |
| PN EN 4883 PN EN 4883 (Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Plates - 6 mm ≤ a ≤ 100 mm - Rm ≥ 1 070 MPa) | 2 | chevron_right |
| PN EN 4884 PN EN 4884 (Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa) | 2 | chevron_right |
| PN EN 4890 PN EN 4890 (Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1050 MPa) | 1 | chevron_right |
| PN EN 4900 PN EN 4900 (Aerospace series - Aluminium alloy 5086 - H111 - Extruded bars - 10 mm ≤ D ≤ 300 mm) | 1 | chevron_right |
| PN EN 4904 PN EN 4904 (Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa - Bars - 100 mm ≤ D ≤ 250 mm) | 2 | chevron_right |
| PN EN 499 PN EN 499 (Welding consumables - Covered electrodes for manual metal arc welding of non alloy and fine grain steels) | 7 | chevron_right |
| PN EN 50149 PN EN 50149 (Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires) | 20 | chevron_right |
| PN EN 50183 PN EN 50183 (Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires) | 6 | chevron_right |
| PN EN 50189 PN EN 50189 (Conductors for overhead lines. Zinc coated steel wires) | 6 | chevron_right |
| PN EN 50307 PN EN 50307 (Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables) | 23 | chevron_right |
| PN EN 541 PN EN 541 (Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications) | 22 | chevron_right |
| PN EN 546-2 PN EN 546-2 (Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties) | 22 | chevron_right |
| PN EN 549 PN EN 549 (Rubber materials for seals and diaphragms for gas appliances and gas equipment) | 60 | chevron_right |
| PN EN 570 PN EN 570 (Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification) | 47 | chevron_right |
| PN EN 573-3 PN EN 573-3 (Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products) | 454 | chevron_right |
| PN EN 575 PN EN 575 (Aluminium and aluminium alloys - Master alloys produced by melting - Specifications) | 100 | chevron_right |
| PN EN 576 PN EN 576 (Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications) | 54 | chevron_right |
| PN EN 586-2 PN EN 586-2 (Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements) | 12 | chevron_right |
| PN EN 601 PN EN 601 (Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff) | 1 | chevron_right |
| PN EN 602 PN EN 602 (Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff) | 1 | chevron_right |
| PN EN 603-2 PN EN 603-2 (Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties) | 18 | chevron_right |
| PN EN 60454-3-1 PN EN 60454-3-1 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3-1: Specifications for individual materials - PVC film tapes with pressure-sensitive adhesive) | 12 | chevron_right |
| PN EN 60454-3-11 PN EN 60454-3-11 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives) | 13 | chevron_right |
| PN EN 60454-3-12 PN EN 60454-3-12 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive) | 9 | chevron_right |
| PN EN 60454-3-14 PN EN 60454-3-14 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive) | 5 | chevron_right |
| PN EN 60454-3-19 PN EN 60454-3-19 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides) | 4 | chevron_right |
| PN EN 60454-3-2 PN EN 60454-3-2 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives) | 8 | chevron_right |
| PN EN 60454-3-4 PN EN 60454-3-4 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive) | 2 | chevron_right |
| PN EN 60454-3-7 PN EN 60454-3-7 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive) | 4 | chevron_right |
| PN EN 60454-3-8 PN EN 60454-3-8 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fiber) | 5 | chevron_right |
| PN EN 60672-3 PN EN 60672-3 (Ceramic and glass-insulating materials - Part 3: Specifications for individual materials) | 54 | chevron_right |
| PN EN 60674-3-1 PN EN 60674-3-1 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors) | 12 | chevron_right |
| PN EN 60674-3-4 to 6 PN EN 60674-3-4 to 6 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation) | 12 | chevron_right |
| PN EN 60674-3-7 PN EN 60674-3-7 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation) | 3 | chevron_right |
| PN EN 60674-3-8 PN EN 60674-3-8 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation) | 3 | chevron_right |
| PN EN 60893-3-2 PN EN 60893-3-2 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins) | 20 | chevron_right |
| PN EN 60893-3-3 PN EN 60893-3-3 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 606893-3-3)) | 2 | chevron_right |
| PN EN 60893-3-4 PN EN 60893-3-4 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4)) | 18 | chevron_right |
| PN EN 60893-3-5 PN EN 60893-3-5 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins) | 5 | chevron_right |
| PN EN 60893-3-6 PN EN 60893-3-6 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins) | 2 | chevron_right |
| PN EN 60893-3-7 PN EN 60893-3-7 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimid resins) | 1 | chevron_right |
| PN EN 610 PN EN 610 (Tin and tin alloys - Ingot tin) | 5 | chevron_right |
| PN EN 611-1 PN EN 611-1 (Tin and tin alloys - Pewter and pewterware - Part 1: Pewter) | 6 | chevron_right |
| PN EN 611-2 PN EN 611-2 (Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware) | 3 | chevron_right |
| PN EN 61212-3-1 PN EN 61212-3-1 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes) | 15 | chevron_right |
| PN EN 61212-3-2 PN EN 61212-3-2 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated molded tubes) | 6 | chevron_right |
| PN EN 61212-3-3 PN EN 61212-3-3 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated molded rods) | 11 | chevron_right |
| PN EN 61249-2-1 PN EN 61249-2-1 (Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad) | 3 | chevron_right |
| PN EN 61249-2-10 PN EN 61249-2-10 (Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| PN EN 61249-2-11 PN EN 61249-2-11 (Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| PN EN 61249-2-2 PN EN 61249-2-2 (Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad) | 4 | chevron_right |
| PN EN 61249-2-21 PN EN 61249-2-21 (Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| PN EN 61249-2-22 PN EN 61249-2-22 (Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| PN EN 61249-2-23 PN EN 61249-2-23 (Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad) | 3 | chevron_right |
| PN EN 61249-2-26 PN EN 61249-2-26 (Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| PN EN 61249-2-27 PN EN 61249-2-27 (Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| PN EN 61249-2-30 PN EN 61249-2-30 (Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| PN EN 61249-2-35 PN EN 61249-2-35 (Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| PN EN 61249-2-36 PN EN 61249-2-36 (Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| PN EN 61249-2-37 PN EN 61249-2-37 (Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| PN EN 61249-2-38 PN EN 61249-2-38 (Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| PN EN 61249-2-39 PN EN 61249-2-39 (Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| PN EN 61249-2-40 PN EN 61249-2-40 (Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| PN EN 61249-2-41 PN EN 61249-2-41 (Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| PN EN 61249-2-42 PN EN 61249-2-42 (Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| PN EN 61249-2-43 PN EN 61249-2-43 (Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| PN EN 61249-2-44 PN EN 61249-2-44 (Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| PN EN 61249-2-5 PN EN 61249-2-5 (Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core / woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| PN EN 61249-2-6 PN EN 61249-2-6 (Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| PN EN 61249-2-8 PN EN 61249-2-8 (Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| PN EN 61249-2-9 PN EN 61249-2-9 (Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| PN EN 622-2 PN EN 622-2 (Fibreboards - Specifications - Part 2: Requirements for hardboards) | 6 | chevron_right |
| PN EN 622-3 PN EN 622-3 (Fibreboards - Specifications - Part 3: Requirements for medium boards) | 10 | chevron_right |
| PN EN 622-4 PN EN 622-4 (Fibreboards - Specifications - Part 4: Requirements for softboards) | 5 | chevron_right |
| PN EN 622-5 PN EN 622-5 (Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)) | 9 | chevron_right |
| PN EN 683-2 PN EN 683-2 (Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties) | 26 | chevron_right |
| PN EN 754-2 PN EN 754-2 (Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties) | 100 | chevron_right |
| PN EN 755-2 PN EN 755-2 (Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties) | 140 | chevron_right |
| PN EN 756 PN EN 756 (Welding consumables - Solid wire, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels) | 34 | chevron_right |
| PN EN 757 PN EN 757 (Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification) | 9 | chevron_right |
| PN EN 758 PN EN 758 (Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels) | 8 | chevron_right |
| PN EN 988 PN EN 988 (Zinc and zinc alloys - Specifications for rolled flat products for building) | 1 | chevron_right |
| PN EN IEC 60674-3-2 PN EN IEC 60674-3-2 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation) | 5 | chevron_right |
| PN EN IEC 60674-3-3 PN EN IEC 60674-3-3 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation) | 6 | chevron_right |
| PN EN IEC 60674-3-4 PN EN IEC 60674-3-4 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4: Polyimide films used for electrical insulation) | 7 | chevron_right |
| PN EN IEC 61249-2-45 PN EN IEC 61249-2-45 (Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| PN EN IEC 61249-2-46 PN EN IEC 61249-2-46 (Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| PN EN IEC 61249-2-47 PN EN IEC 61249-2-47 (Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2.0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| PN EN ISO 10081-1 PN EN ISO 10081-1 (Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003)) | 13 | chevron_right |
| PN EN ISO 10081-2 PN EN ISO 10081-2 (Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon (ISO 10081-2:2003)) | 36 | chevron_right |
| PN EN ISO 10081-3 PN EN ISO 10081-3 (Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 50% residual carbon (ISO 10081-3:2003)) | 96 | chevron_right |
| PN EN ISO 10081-4 PN EN ISO 10081-4 (Classification of dense shaped refractory products - Part 4: Special products (ISO 10081-4:2014)) | 175 | chevron_right |
| PN EN ISO 10366-1 PN EN ISO 10366-1 (Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002)) | 11 | chevron_right |
| PN EN ISO 1071 PN EN ISO 1071 (Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification) | 41 | chevron_right |
| PN EN ISO 11542-1 PN EN ISO 11542-1 (Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001)) | 9 | chevron_right |
| PN EN ISO 1163-1 PN EN ISO 1163-1 (Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995)) | 24 | chevron_right |
| PN EN ISO 11833-1 PN EN ISO 11833-1 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)) | 24 | chevron_right |
| PN EN ISO 11833-2 PN EN ISO 11833-2 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)) | 7 | chevron_right |
| PN EN ISO 11960 PN EN ISO 11960 (Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells) | 24 | chevron_right |
| PN EN ISO 11961 PN EN ISO 11961 (Petroleum and natural gas industries - Steel drill pipe) | 16 | chevron_right |
| PN EN ISO 11963 PN EN ISO 11963 (Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2019)) | 14 | chevron_right |
| PN EN ISO 12153 PN EN ISO 12153 (Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification) | 21 | chevron_right |
| PN EN ISO 12683 PN EN ISO 12683 (Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004)) | 27 | chevron_right |
| PN EN ISO 13085 PN EN ISO 13085 (Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells (ISO 13085:2014)) | 4 | chevron_right |
| PN EN ISO 13356 PN EN ISO 13356 (Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO 13356:2015)) | 1 | chevron_right |
| PN EN ISO 13680 PN EN ISO 13680 (Oil and gas industries including lower carbon energy - Corrosion - resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material -Technical delivery conditions) | 101 | chevron_right |
| PN EN ISO 14172 PN EN ISO 14172 (Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015)) | 51 | chevron_right |
| PN EN ISO 14343 PN EN ISO 14343 (Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification) | 125 | chevron_right |
| PN EN ISO 1456 PN EN ISO 1456 (Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium) | 382 | chevron_right |
| PN EN ISO 14631 PN EN ISO 14631 (Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:2021)) | 3 | chevron_right |
| PN EN ISO 14632 PN EN ISO 14632 (Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021)) | 4 | chevron_right |
| PN EN ISO 15013 PN EN ISO 15013 (Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007)) | 7 | chevron_right |
| PN EN ISO 15015 PN EN ISO 15015 (Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)) | 4 | chevron_right |
| PN EN ISO 15527 PN EN ISO 15527 (Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018)) | 4 | chevron_right |
| PN EN ISO 15546 PN EN ISO 15546 (Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011)) | 4 | chevron_right |
| PN EN ISO 16120-2 PN EN ISO 16120-2 (Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod) | 60 | chevron_right |
| PN EN ISO 16120-3 PN EN ISO 16120-3 (Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod) | 6 | chevron_right |
| PN EN ISO 16120-4 PN EN ISO 16120-4 (Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications) | 68 | chevron_right |
| PN EN ISO 1622-1 PN EN ISO 1622-1 (Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:2012)) | 7 | chevron_right |
| PN EN ISO 16834 PN EN ISO 16834 (Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)) | 47 | chevron_right |
| PN EN ISO 17633 PN EN ISO 17633 (Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2025)) | 94 | chevron_right |
| PN EN ISO 17634 PN EN ISO 17634 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)) | 23 | chevron_right |
| PN EN ISO 17672 PN EN ISO 17672 (Brazing - Filler metals) | 148 | chevron_right |
| PN EN ISO 17777 PN EN ISO 17777 (Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification) | 46 | chevron_right |
| PN EN ISO 18273 PN EN ISO 18273 (Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification) | 70 | chevron_right |
| PN EN ISO 18274 PN EN ISO 18274 (Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification) | 74 | chevron_right |
| PN EN ISO 18276 PN EN ISO 18276 (Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification (ISO 18276:2017)) | 28 | chevron_right |
| PN EN ISO 1872-1 PN EN ISO 1872-1 (Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993)) | 59 | chevron_right |
| PN EN ISO 1873-1 PN EN ISO 1873-1 (Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995)) | 18 | chevron_right |
| PN EN ISO 1874-1 PN EN ISO 1874-1 (Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1874-1:2010)) | 522 | chevron_right |
| PN EN ISO 19288 PN EN ISO 19288 (Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification) | 28 | chevron_right |
| PN EN ISO 19598 PN EN ISO 19598 (Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment) | 19 | chevron_right |
| PN EN ISO 20378 PN EN ISO 20378 (Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification) | 10 | chevron_right |
| PN EN ISO 2081 PN EN ISO 2081 (Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel) | 18 | chevron_right |
| PN EN ISO 2082 PN EN ISO 2082 (Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017)) | 18 | chevron_right |
| PN EN ISO 21305-1 PN EN ISO 21305-1 (Plastics - Polycarbonate (PC) molding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019)) | 7 | chevron_right |
| PN EN ISO 2179 PN EN ISO 2179 (Electroplated coatings of tin-nickel alloy - Specification and test methods (ISO 2179:1986)) | 4 | chevron_right |
| PN EN ISO 22068 PN EN ISO 22068 (Sintered-metal injection-moulded materials - Specifications) | 36 | chevron_right |
| PN EN ISO 24023-1 PN EN ISO 24023-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials, Part 1: Designation system and basis for specifications) | 2 | chevron_right |
| PN EN ISO 24034 PN EN ISO 24034 (Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification) | 72 | chevron_right |
| PN EN ISO 24373 PN EN ISO 24373 (Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification) | 56 | chevron_right |
| PN EN ISO 2560 PN EN ISO 2560 (Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification) | 96 | chevron_right |
| PN EN ISO 2580-1 PN EN ISO 2580-1 (Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002)) | 41 | chevron_right |
| PN EN ISO 26304 PN EN ISO 26304 (Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification) | 62 | chevron_right |
| PN EN ISO 2702 PN EN ISO 2702 (Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)) | 12 | chevron_right |
| PN EN ISO 28941-1 PN EN ISO 28941-1 (Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 28941-1:2008)) | 20 | chevron_right |
| PN EN ISO 2897-1 PN EN ISO 2897-1 (Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997)) | 12 | chevron_right |
| PN EN ISO 2898-1 PN EN ISO 2898-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996)) | 2 | chevron_right |
| PN EN ISO 29988-1 PN EN ISO 29988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 29988-1:2019)) | 22 | chevron_right |
| PN EN ISO 3183 PN EN ISO 3183 (Petroleum and natural gas industries - Steel pipe for pipeline transportation systems) | 220 | chevron_right |
| PN EN ISO 3506-1 PN EN ISO 3506-1 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)) | 40 | chevron_right |
| PN EN ISO 3506-2 PN EN ISO 3506-2 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes) | 80 | chevron_right |
| PN EN ISO 3506-3 PN EN ISO 3506-3 (Fasteners - Mechanical properties of corrosion resistant stainless steel fasteners - Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes) | 16 | chevron_right |
| PN EN ISO 3506-4 PN EN ISO 3506-4 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws with specified grades and hardness classes) | 28 | chevron_right |
| PN EN ISO 3506-5 PN EN ISO 3506-5 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications) | 9 | chevron_right |
| PN EN ISO 3506-6 PN EN ISO 3506-6 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)) | 41 | chevron_right |
| PN EN ISO 3506-7 PN EN ISO 3506-7 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 7: Flat washers with specified grades and property classes) | 18 | chevron_right |
| PN EN ISO 4042 PN EN ISO 4042 (Fasteners - Electroplated coating systems (ISO 4042:2022)) | 72 | chevron_right |
| PN EN ISO 4613-1 PN EN ISO 4613-1 (Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993)) | 52 | chevron_right |
| PN EN ISO 4894-1 PN EN ISO 4894-1 (Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997)) | 3 | chevron_right |
| PN EN ISO 4957 PN EN ISO 4957 (Tool steels) | 96 | chevron_right |
| PN EN ISO 5451 PN EN ISO 5451 (Ferrovanadium - Specification and conditions of delivery) | 6 | chevron_right |
| PN EN ISO 5755 PN EN ISO 5755 (Sintered metal materials. Specifications (ISO 5755:2022)) | 205 | chevron_right |
| PN EN ISO 5832-1 PN EN ISO 5832-1 (Implants for surgery - Metallic materials - Part 1: Wrought stainless steel) | 1 | chevron_right |
| PN EN ISO 5832-2 PN EN ISO 5832-2 (Implants for surgery - Metallic materials - Part 2: Unalloyed titanium) | 6 | chevron_right |
| PN EN ISO 5832-3 PN EN ISO 5832-3 (Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy) | 2 | chevron_right |
| PN EN ISO 5832-6 PN EN ISO 5832-6 (Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:2022)) | 1 | chevron_right |
| PN EN ISO 5832-7 PN EN ISO 5832-7 (Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy) | 1 | chevron_right |
| PN EN ISO 636 PN EN ISO 636 (Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification) | 37 | chevron_right |
| PN EN ISO 6402-1 PN EN ISO 6402-1 (Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 6402-1:2002)) | 25 | chevron_right |
| PN EN ISO 6501 PN EN ISO 6501 (Ferronickel - Specification and delivery requirements) | 5 | chevron_right |
| PN EN ISO 683-1 PN EN ISO 683-1 (Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering) | 28 | chevron_right |
| PN EN ISO 683-17 PN EN ISO 683-17 (Heat-treatable steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels) | 73 | chevron_right |
| PN EN ISO 683-2 PN EN ISO 683-2 (Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering) | 50 | chevron_right |
| PN EN ISO 683-3 PN EN ISO 683-3 (Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels) | 72 | chevron_right |
| PN EN ISO 683-4 PN EN ISO 683-4 (Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels) | 21 | chevron_right |
| PN EN ISO 683-5 PN EN ISO 683-5 (Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels) | 11 | chevron_right |
| PN EN ISO 683-7 PN EN ISO 683-7 (Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels) | 167 | chevron_right |
| PN EN ISO 6848 PN EN ISO 6848 (Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)) | 11 | chevron_right |
| PN EN ISO 6931-1 PN EN ISO 6931-1 (Stainless steels for springs - Part 1:Wire) | 16 | chevron_right |
| PN EN ISO 7153-1 PN EN ISO 7153-1 (Surgical instruments - Materials - Part 1: Metals) | 50 | chevron_right |
| PN EN ISO 7391-1 PN EN ISO 7391-1 (Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 60 | chevron_right |
| PN EN ISO 7792-1 PN EN ISO 7792-1 (Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7792-1:2012)) | 225 | chevron_right |
| PN EN ISO 7823-1 PN EN ISO 7823-1 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)) | 1 | chevron_right |
| PN EN ISO 7823-2 PN EN ISO 7823-2 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)) | 1 | chevron_right |
| PN EN ISO 7823-3 PN EN ISO 7823-3 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2001)) | 1 | chevron_right |
| PN EN ISO 8257-1 PN EN ISO 8257-1 (Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998)) | 37 | chevron_right |
| PN EN ISO 898-1 PN EN ISO 898-1 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013)) | 10 | chevron_right |
| PN EN ISO 898-2 PN EN ISO 898-2 (Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)) | 7 | chevron_right |
| PN EN ISO 898-3 PN EN ISO 898-3 (Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes) | 4 | chevron_right |
| PN EN ISO 898-5 PN EN ISO 898-5 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread) | 4 | chevron_right |
| PN EN ISO 898-6 PN EN ISO 898-6 (Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread) | 7 | chevron_right |
| PN EN ISO 8986-1 PN EN ISO 8986-1 (Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:2009)) | 16 | chevron_right |
| PN EN ISO 9351 PN EN ISO 9351 (Galvanic anodes for cathodic protection in seawater and saline sediments) | 13 | chevron_right |
| PN EN ISO 9453 PN EN ISO 9453 (Soft solder alloys - Chemical compositions and forms) | 177 | chevron_right |
| PN EN ISO 9717 PN EN ISO 9717 (Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)) | 3 | chevron_right |
| PN EN ISO 9988-1 PN EN ISO 9988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 9988-1:2004)) | 97 | chevron_right |
| PN ENV 10080 PN ENV 10080 (Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric) | 4 | chevron_right |
| PN H-88027 PN H-88027 (Casting aluminium alloys) | 11 | chevron_right |
| PN prEN 10138-2 PN prEN 10138-2 (Prestressing steels - Part 2: wire) | 8 | chevron_right |
| PN prEN 10138-3 PN prEN 10138-3 (Prestressing steels - Part 3: strand) | 22 | chevron_right |
| PN prEN 10138-4 PN prEN 10138-4 (Prestressing steels - Part 4: bars) | 6 | chevron_right |
| PN prEN 10268 PN prEN 10268 (Cold rolled flat products higher yield strength for cold forming - Technical delivery conditions) | 19 | chevron_right |
| PN prEN 10338 PN prEN 10338 (Hot rolled and cold rolled non-coated flat products of multiphase steels for cold forming - Technical delivery conditions) | 4 | chevron_right |
| PN-H-74231 PN-H-74231 (Rotary drilling -- Drilling fluid pipes) | 2 | chevron_right |
| PN-H-74235 PN-H-74235 (Drill pipes casing core drilling) | 2 | chevron_right |
| PN-H-74238 PN-H-74238 (Seamless steel tubing pipes of standard diameter) | 5 | chevron_right |
| PN-H-74244 PN-H-74244 (Welded steel pipes) | 5 | chevron_right |
| PN-H-74245 PN-H-74245 (Cold-drowning or rolled seamless steel tubes of specified application) | 9 | chevron_right |
| PN-H-74246 PN-H-74246 (Seamless steel pipes controlled general purposes) | 9 | chevron_right |
| PN-H-74247 PN-H-74247 (Steel tubes for the food industry) | 6 | chevron_right |
| PN-H-74248 PN-H-74248 (Hot rolling tubes for hydraulic cylinders) | 6 | chevron_right |
| PN-H-74598 PN-H-74598 (Aluminium and aluminium alloys-Drawning tubes for aircraft industry) | 8 | chevron_right |
| PN-H-74599 PN-H-74599 (Aluminium alloy PA2 - Hollow section for bushes for ferrule - secured eye terminations) | 1 | chevron_right |
| PN-H-82120 PN-H-82120 (Copper - Grades) | 29 | chevron_right |
| PN-H-82160 PN-H-82160 (Wrought aluminium - Grades) | 17 | chevron_right |
| PN-H-82163 PN-H-82163 (Unalloyed aluminium for primary ingots) | 9 | chevron_right |
| PN-H-82180 PN-H-82180 (Wrought nickel - Grades) | 18 | chevron_right |
| PN-H-83002 PN-H-83002 (Foundry pig iron) | 28 | chevron_right |
| PN-H-83144 PN-H-83144 (Alloy cast iron - Grades) | 48 | chevron_right |
| PN-H-83152 PN-H-83152 (Structural carbon cast steel - Grades) | 10 | chevron_right |
| PN-H-83156 PN-H-83156 (Constructional alloy cast steel) | 24 | chevron_right |
| PN-H-83157 PN-H-83157 (Cast steel for high temperature service -- Grades) | 9 | chevron_right |
| PN-H-83158 PN-H-83158 (Corrosion-resistant cast steel -- Grades) | 18 | chevron_right |
| PN-H-83159 PN-H-83159 (Heat-resisting and creep-resisting cast steel -- Grades) | 9 | chevron_right |
| PN-H-83160 PN-H-83160 (Abrasive wear resistant cast steel. Grades) | 12 | chevron_right |
| PN-H-83161 PN-H-83161 (Tool cast steel - Grades) | 18 | chevron_right |
| PN-H-83170 PN-H-83170 (Auxiliary foundry materials - Spheroidisers) | 20 | chevron_right |
| PN-H-84016 PN-H-84016 (High strength low-alloy balanced steel -- Grades) | 7 | chevron_right |
| PN-H-84017 PN-H-84017 (Low alloy structural steel with improved atmospheric corrosion resistance - Grades) | 18 | chevron_right |
| PN-H-84018 PN-H-84018 (High strength low alloy steel -- Grades) | 71 | chevron_right |
| PN-H-84019 PN-H-84019 (Unalloyed wrought steel for case hardening and for quenching and tempering - Grades) | 45 | chevron_right |
| PN-H-84020 PN-H-84020 (Structural unalloyed steel for general purposes - Grades) | 53 | chevron_right |
| PN-H-84023-02 PN-H-84023-02 (Steel for determined purposes. Low carbon magnetically soft steel. Grades) | 10 | chevron_right |
| PN-H-84023-03 PN-H-84023-03 (Steel for determined purposes. Low carbon steel for plates sheets and strips. Grades) | 12 | chevron_right |
| PN-H-84023-04 PN-H-84023-04 (Steel for determined purposes. Standard quality low carbon steel. Grades) | 7 | chevron_right |
| PN-H-84023-05 PN-H-84023-05 (Steel for determined purposes. High-quality low carbon, low alloy and alloy steel. Grades) | 24 | chevron_right |
| PN-H-84023-06 PN-H-84023-06 (Steel for determined purposes -- Steel for concrete reinforcement -- Grades) | 11 | chevron_right |
| PN-H-84023-07 PN-H-84023-07 (Steel for determined purposes. Pipe steel. Grades) | 18 | chevron_right |
| PN-H-84023-08 PN-H-84023-08 (Steel for determined purposes. Steel for construction of link chains. Grades) | 7 | chevron_right |
| PN-H-84023-09 PN-H-84023-09 (Steel for determined purposes -- Steel for cylinders for technical gas -- Grades) | 2 | chevron_right |
| PN-H-84024 PN-H-84024 (Steel for elevated temperature service - Grades) | 37 | chevron_right |
| PN-H-84026 PN-H-84026 (Free-machining steel. Bars, wire rod and wire. Requirements and tests) | 7 | chevron_right |
| PN-H-84027-02 PN-H-84027-02 (Steel for railway - Smith forgings - Grades) | 4 | chevron_right |
| PN-H-84027-03 PN-H-84027-03 (Steel for railway - Axles of wheel sets for rail vehicles - Grades) | 5 | chevron_right |
| PN-H-84027-04 PN-H-84027-04 (Steel for railway - Forgings of draw-gear - Grades) | 4 | chevron_right |
| PN-H-84027-06 PN-H-84027-06 (Steel for railway - Tires for wheels sets of rail vehicles - Grades) | 4 | chevron_right |
| PN-H-84027-07 PN-H-84027-07 (Steel for railway - Rails for normal width rail-track - Grades) | 4 | chevron_right |
| PN-H-84027-08 PN-H-84027-08 (Steel for railway - Rolled sections for railway accessories - Grades) | 4 | chevron_right |
| PN-H-84027-1 PN-H-84027-1 (Steel for railway - Wheel centres - Grades) | 5 | chevron_right |
| PN-H-84028 PN-H-84028 (Non alloyed steel for wire rods for conversion to wire - Grades) | 54 | chevron_right |
| PN-H-84030-02 PN-H-84030-02 (Structural alloy steel - Carburizing steel - Grades) | 16 | chevron_right |
| PN-H-84030-03 PN-H-84030-03 (Structural alloy steel - Nitriding steel - Grades) | 3 | chevron_right |
| PN-H-84030-04 PN-H-84030-04 (Structural alloyed steel - Steel for heat treatment (quenching + tempering) and surface hardening - Grades) | 35 | chevron_right |
| PN-H-84032 PN-H-84032 (Steel for springs - Grades) | 17 | chevron_right |
| PN-H-84035 PN-H-84035 (Alloyed structural steels for super loading equipment. Grades) | 13 | chevron_right |
| PN-H-84038 PN-H-84038 (Hard magnetic alloy steel -- Bars -- Requirements and testing) | 2 | chevron_right |
| PN-H-84041 PN-H-84041 (Ball and roller bearings steel - Blooms, billets, bars, wire rods and wires) | 2 | chevron_right |
| PN-H-84042 PN-H-84042 (Micro-alloyed steels profiles and accessories for mining) | 2 | chevron_right |
| PN-H-85020 PN-H-85020 (Carbon steel tool - Grades) | 16 | chevron_right |
| PN-H-85021 PN-H-85021 (Alloy tool steel for hot-work - Grades) | 12 | chevron_right |
| PN-H-85022 PN-H-85022 (High-speed steel - Grades) | 10 | chevron_right |
| PN-H-85023 PN-H-85023 (Alloy tool steel for cold-work - Grades) | 20 | chevron_right |
| PN-H-86020 PN-H-86020 (Corrosion resisting steel (stainless steel and acid resistant steel). Grades) | 34 | chevron_right |
| PN-H-86022 PN-H-86022 (Heat resisting steel. Grades) | 19 | chevron_right |
| PN-H-87025 PN-H-87025 (Wrought copper-zinc alloys - Grades) | 48 | chevron_right |
| PN-H-87026 PN-H-87026 (Casting copper alloy, grades) | 21 | chevron_right |
| PN-H-87027 PN-H-87027 (Wrought copper-nickel-zinc alloys, grades) | 12 | chevron_right |
| PN-H-87045 PN-H-87045 (Wrought nickel alloys -- Grades) | 43 | chevron_right |
| PN-H-87046 PN-H-87046 (Alloy nickel - Grades) | 19 | chevron_right |
| PN-H-87047 PN-H-87047 (Soft magnetic alloys nickel-iron and cobalt-iron - Grades) | 11 | chevron_right |
| PN-H-87051 PN-H-87051 (Wrought copper-aluminium alloys. Grades) | 5 | chevron_right |
| PN-H-87052 PN-H-87052 (Wrought copper - nickel alloys, Grades) | 12 | chevron_right |
| PN-H-87053 PN-H-87053 (Alloyed copper - Grades) | 31 | chevron_right |
| PN-H-87201 PN-H-87201 (Lead alloys) | 47 | chevron_right |
| PN-H-88026 PN-H-88026 (Wrought aluminium alloys, Grades) | 54 | chevron_right |
| PN-H-92133 PN-H-92133 (Low-carbon, soft-magnetic and hot-rolled steel. Strip plates and sheets) | 4 | chevron_right |
| PN-H-92145 PN-H-92145 (TMS1 steel - Cold rolled sheets) | 1 | chevron_right |
| PN-H-92147 PN-H-92147 (Steel - Plates and universal plates for shipbuilding) | 13 | chevron_right |
| PN-H-92149 PN-H-92149 (Structural weather-resisting steel sheets) | 4 | chevron_right |
| PN-H-92327 PN-H-92327 (Low carbon steel. Cold rolled strip) | 14 | chevron_right |
| PN-H-92334 PN-H-92334 (Unalloyed structural steel for general purposes. Cold rolled strip) | 11 | chevron_right |
| PN-H-92336 PN-H-92336 (Steel and high electrical resistance nickel alloys strips) | 8 | chevron_right |
| PN-H-92602 PN-H-92602 (Carbon steel. Wire rod for spring wire) | 7 | chevron_right |
| PN-H-92610 PN-H-92610 (Steel and nickel alloys -- High electrical resistance wire) | 7 | chevron_right |
| PN-H-92811 PN-H-92811 (Copper and copper alloys - Strips for radiators) | 10 | chevron_right |
| PN-H-92825 PN-H-92825 (Copper-nickel alloy MNM441 - Strips) | 1 | chevron_right |
| PN-H-93005 PN-H-93005 (Steel for springs - Peeled bars, cold drawn bars and wires) | 18 | chevron_right |
| PN-H-93011 PN-H-93011 (Structural steel - Hot rolled square billets and for technical gas cylinders and stationary pressure vessels) | 4 | chevron_right |
| PN-H-93017 PN-H-93017 (Steel - Bars and sections for shipbuilding) | 13 | chevron_right |
| PN-H-93027 PN-H-93027 (Rolled steel - Bars and wire rod for link chains) | 10 | chevron_right |
| PN-H-93028 PN-H-93028 (Steel -- Hot rolled wire rod and bars for mining link chains) | 3 | chevron_right |
| PN-H-93220 PN-H-93220 (Steel B500SP high ductility for concrete reinforcement - bars and rolling ribbed) | 1 | chevron_right |
| PN-H-93234 PN-H-93234 (Steel for springs - Cold drawn bars and wire for valve springs) | 2 | chevron_right |
| PN-H-93235 PN-H-93235 (Structural non-alloyed and alloyed steel. Billets and bars hot rolled for motorization) | 23 | chevron_right |
| PN-H-93238 PN-H-93238 (Alloy steels to work in elevated temperatures. Hot rolled and forged and die forgings for turbine blades) | 8 | chevron_right |
| PN-H-93247-1 PN-H-93247-1 (Weldable steel B500A to the reinforcement of concrete -Part 1: Wire ribbed) | 1 | chevron_right |
| PN-H-93247-2 PN-H-93247-2 (Weldable steel B500A to the reinforcement of concrete -Part 2: Welded mesh reinforcement) | 1 | chevron_right |
| PN-H-93421 PN-H-93421 (Railway rails normal width rail-track) | 5 | chevron_right |
| PN-H-93431 PN-H-93431 (Hot rolled steel shapes for the drop center rims trackwheels production) | 2 | chevron_right |
| PN-H-93440 PN-H-93440 (Steel -- Tram rails with groove) | 1 | chevron_right |
| PN-H-93836 PN-H-93836 (Nickel and nickel alloys - Wire) | 9 | chevron_right |
| PN-H-93846 PN-H-93846 (Copper-nickel-manganese alloy MNM401 - Wire) | 1 | chevron_right |
| PN-H-93850 PN-H-93850 (Alloyed copper - Wire) | 8 | chevron_right |
| PN-H-94010 PN-H-94010 (Steel die forgings for aircraft -- Technical requirements and tests) | 36 | chevron_right |
| PN-H-94014 PN-H-94014 (Die forgings of steel for motor - cars industry - requirements and testing) | 52 | chevron_right |
| PN-H-94015 PN-H-94015 (Rotor steel forgings for power generator) | 1 | chevron_right |
| PN-H-94017 PN-H-94017 (Bars and free forgings steel for diesel engines) | 16 | chevron_right |
| PN-H-94018 PN-H-94018 (Steel forgings for shafts and rotor disks for steam turbins) | 8 | chevron_right |
| PN-H-94019 PN-H-94019 (Steel forgings for ladles trunnion) | 1 | chevron_right |
| PN-H-94020 PN-H-94020 (Steel forgings for geared parts) | 13 | chevron_right |
| PN-H-94021 PN-H-94021 (Steel forgings for rolling bearings rings) | 3 | chevron_right |
| PN-H-94022 PN-H-94022 (Hardened forged rolls for cold rolling) | 5 | chevron_right |
| PN-H-94023 PN-H-94023 (Roll forged rings made of unalloyed and alloyed steel) | 115 | chevron_right |
| PN-H-94054 PN-H-94054 (Forged bars of carbon and alloy tool steels for cold work) | 34 | chevron_right |
| PN-H-94056 PN-H-94056 (Flat forged bars, die-blocks and disks for forging dies) | 10 | chevron_right |
| PN-H-98001 PN-H-98001 (Wrought copper alloy - Slugs for special purposes) | 2 | chevron_right |
| PN-ISO 3755 PN-ISO 3755 (Cast carbon steels for general engineering purposes (ISO 3755:1991)) | 8 | chevron_right |
| PN-ISO 6935-1 PN-ISO 6935-1 (Steel for the reinforcement of concrete - Smooth Bars (ISO 6935-1:1991)) | 10 | chevron_right |
| PN-ISO 6935-2 PN-ISO 6935-2 (Steel for the reinforcement of concrete -Ribbed bars (ISO 6935-2:1991)) | 5 | chevron_right |
| PN-K-91042 PN-K-91042 (Railway rolling stock -- Black tyres for wheel sets -- Requirements and tests) | 1 | chevron_right |
| PN-K-91044 PN-K-91044 (Railway rolling stock treiler stock unmachined wheel tyres specification) | 1 | chevron_right |
| PN-K-91046 PN-K-91046 (Traction vehicles -- Wheel set axles -- Requirements and tests) | 1 | chevron_right |
| PN-M-69420 PN-M-69420 (Welding -- Solid wires for welding and surfacing of steel) | 61 | chevron_right |