ISO
Standard · International · 390 references
| Standard number | Materials | |
|---|---|---|
| International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2009) | 1 | chevron_right |
| ISO 1005-1 ISO 1005-1 (Railway rolling stock material - Part 1: Rough-rolled tyres for tractive and trailing stock - Technical delivery conditions) | 7 | chevron_right |
| ISO 1005-3 ISO 1005-3 (Railway rolling stock material - Part 3: Axles for tractive and trailing stock - Quality requirements) | 5 | chevron_right |
| ISO 1005-4 ISO 1005-4 (Railway rolling stock material - Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock - Quality requirements) | 3 | chevron_right |
| ISO 1005-6 ISO 1005-6 (Railway rolling stock material - Part 6: Solid wheels for tractive and trailing stock - Technical delivery conditions) | 48 | chevron_right |
| ISO 10081-1 ISO 10081-1 (Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003)) | 13 | chevron_right |
| ISO 10081-2 ISO 10081-2 (Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon) | 36 | chevron_right |
| ISO 10081-3 ISO 10081-3 (Classification of dense shaped refractory products - Part 3: Basic products containing from 7 % to 50 % residual carbon) | 96 | chevron_right |
| ISO 10081-4 ISO 10081-4 (Classification of dense shaped refractory products - Part 4: Special products) | 175 | chevron_right |
| ISO 10334 ISO 10334 (Implants for surgery - Malleable wires for use as sutures and other surgical applications) | 4 | chevron_right |
| ISO 10366-1 ISO 10366-1 (Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 11 | chevron_right |
| ISO 10384 ISO 10384 (Hot-rolled carbon steel sheet as defined by chemical composition) | 16 | chevron_right |
| ISO 10386 ISO 10386 (Ferroboron - Specification and conditions of delivery) | 6 | chevron_right |
| ISO 10387 ISO 10387 (Metal chrome - Specification and conditions of delivery) | 5 | chevron_right |
| ISO 1052 ISO 1052 (Steels for general engineering purposes) | 3 | chevron_right |
| ISO 10544 ISO 10544 (Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric) | 3 | chevron_right |
| ISO 10679 ISO 10679 (Steel - Cast tool steel) | 62 | chevron_right |
| ISO 10683 ISO 10683 (Fasteners - Non-electrolytically applied zinc flake coating systems) | 20 | chevron_right |
| ISO 1071 ISO 1071 (Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification) | 41 | chevron_right |
| ISO 10799 ISO 10799 (Structural steels - Cold-formed, welded, structural hollow sections - Technical delivery requirements) | 19 | chevron_right |
| ISO 10799-1 ISO 10799-1 (Cold-formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 19 | chevron_right |
| ISO 1083 ISO 1083 (Spheroidal graphite cast irons - Classification) | 48 | chevron_right |
| ISO 115 ISO 115 (Unalloyed aluminium ingots for remelting - Classification and composition) | 20 | chevron_right |
| ISO 11542-1 ISO 11542-1 (Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 9 | chevron_right |
| ISO 1163-1 ISO 1163-1 (Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 24 | chevron_right |
| ISO 11692 ISO 11692 (Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures) | 15 | chevron_right |
| ISO 11833-1 ISO 11833-1 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm) | 24 | chevron_right |
| ISO 11833-2 ISO 11833-2 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm) | 7 | chevron_right |
| ISO 1187 ISO 1187 (Special wrought copper alloys - Chemical composition and forms of wrought products) | 9 | chevron_right |
| ISO 11949 ISO 11949 (Cold-reduced tinmill products - Electrolytic tinplate) | 64 | chevron_right |
| ISO 11950 ISO 11950 (Cold-reduced tinmill products - Electrolytic chromium/chromium oxide-coated steel) | 64 | chevron_right |
| ISO 11951 ISO 11951 (Cold-reduced tinmill products - Blackplate) | 65 | chevron_right |
| ISO 11960 ISO 11960 (Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells) | 15 | chevron_right |
| ISO 11961 ISO 11961 (Petroleum and natural gas industries - Steel drill pipe) | 16 | chevron_right |
| ISO 11963 ISO 11963 (Plastics - Polycarbonate sheets - Types, dimensions and characteristics) | 14 | chevron_right |
| ISO 11972 ISO 11972 (Corrosion-resistant cast steels for general applications) | 57 | chevron_right |
| ISO 11973 ISO 11973 (Heat-resistant cast steels and alloys for general applications) | 59 | chevron_right |
| ISO 12086-1 ISO 12086-1 (Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 56 | chevron_right |
| ISO 121 ISO 121 (Magnesium-aluminium-zinc alloy ingots and alloy castings - Chemical composition and mechanical properties of sand cast reference test bars) | 10 | chevron_right |
| ISO 12153 ISO 12153 (Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification) | 21 | chevron_right |
| ISO 12633-1 ISO 12633-1 (Hot-finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 11 | chevron_right |
| ISO 12725 ISO 12725 (Nickel and nickel alloy castings) | 32 | chevron_right |
| ISO 13085 ISO 13085 (Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells (ISO 13085:2014)) | 4 | chevron_right |
| ISO 13092 ISO 13092 (Titanium and titanium alloys - Titanium sponge) | 10 | chevron_right |
| ISO 13356 ISO 13356 (Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)) | 1 | chevron_right |
| ISO 1336 ISO 1336 (Wrought coppers (having minimum copper contents of 97,5 %) - Chemical composition and forms of wrought products) | 13 | chevron_right |
| ISO 1337 ISO 1337 (Wrought coppers (having minimum copper contents of 99,85 %) - Chemical composition and forms of wrought products) | 7 | chevron_right |
| ISO 1338 ISO 1338 (Cast copper alloys - Composition and mechanical properties) | 22 | chevron_right |
| ISO 13521 ISO 13521 (Austenitic manganese steel castings) | 20 | chevron_right |
| ISO 13583-2 ISO 13583-2 (Centrifugally cast steel and alloy products - Part 2: Heat resistant materials) | 42 | chevron_right |
| ISO 13680 ISO 13680 (Oil and gas industries including lower carbon energy - Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions) | 100 | chevron_right |
| ISO 13782 ISO 13782 (Implants for surgery - Metallic materials - Unalloyed tantalum for surgical implant applications) | 2 | chevron_right |
| ISO 13887 ISO 13887 (Steel sheet, cold-reduced, of higher yield strength with improved formability) | 7 | chevron_right |
| ISO 13976 ISO 13976 (Hot-rolled steel sheet in coils of structural quality and heavy thickness) | 6 | chevron_right |
| ISO 14172 ISO 14172 (Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification) | 51 | chevron_right |
| ISO 14341 ISO 14341 (Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification) | 10 | chevron_right |
| ISO 14343 ISO 14343 (Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification) | 125 | chevron_right |
| ISO 1456 ISO 1456 (Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium) | 382 | chevron_right |
| ISO 14590 ISO 14590 (Cold-reduced steel sheet of high tensile strength and low yield point with improved formability) | 26 | chevron_right |
| ISO 14631 ISO 14631 (Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods) | 3 | chevron_right |
| ISO 14632 ISO 14632 (Extruded sheets of polyethylene (PE-HD) - Requirements and test methods) | 4 | chevron_right |
| ISO 14737 ISO 14737 (Carbon and low alloy cast steels for general applications) | 51 | chevron_right |
| ISO 14788 ISO 14788 (Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities) | 35 | chevron_right |
| ISO 14811 ISO 14811 (Ultra-low carbon high boron steel wire rod for copper cladded wire) | 4 | chevron_right |
| ISO 15013 ISO 15013 (Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods) | 7 | chevron_right |
| ISO 15015 ISO 15015 (Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods) | 4 | chevron_right |
| ISO 15177 ISO 15177 (Hot-rolled twin-roll cast carbon steel sheet of commercial quality) | 1 | chevron_right |
| ISO 15179 ISO 15179 (Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel) | 20 | chevron_right |
| ISO 15201 ISO 15201 (Zinc and zinc alloys - Castings - Specifications) | 18 | chevron_right |
| ISO 15208 ISO 15208 (Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality) | 10 | chevron_right |
| ISO 15211 ISO 15211 (Steel sheet, twin-roll cast, zinc-coated by the continuous hot-dip process, of structural quality and high strength) | 29 | chevron_right |
| ISO 15510 ISO 15510 (Stainless steels -- Chemical composition) | 423 | chevron_right |
| ISO 15527 ISO 15527 (Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods) | 4 | chevron_right |
| ISO 15546 ISO 15546 (Petroleum and natural gas industries - Aluminium alloy drill pipe) | 4 | chevron_right |
| ISO 15726 ISO 15726 (Metallic and other inorganic coatings - Electrodeposited zinc alloys with nickel, cobalt or iron) | 21 | chevron_right |
| ISO 15987 ISO 15987 (Plastics - Film and sheeting - Biaxially oriented polyamide (nylon) films) | 2 | chevron_right |
| ISO 15988 ISO 15988 (Plastics - Film and sheeting - Biaxially oriented poly(ethylene terephthalate) (PET) films) | 2 | chevron_right |
| ISO 16112 ISO 16112 (Compacted (vermicular) graphite cast irons - Classification) | 10 | chevron_right |
| ISO 16120-2 ISO 16120-2 (Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod) | 60 | chevron_right |
| ISO 16120-3 ISO 16120-3 (Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod) | 6 | chevron_right |
| ISO 16120-4 ISO 16120-4 (Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications) | 68 | chevron_right |
| ISO 16143-1 ISO 16143-1 (Stainless steels for general purposes - Part 1: Corrosion-resistant flat products) | 153 | chevron_right |
| ISO 16143-2 ISO 16143-2 (Stainless steels for general purposes - Part 2: Semi-finished products, bars, rods and sections) | 131 | chevron_right |
| ISO 16143-3 ISO 16143-3 (Stainless steels for general purposes - Part 3: Wire) | 104 | chevron_right |
| ISO 16143-4 ISO 16143-4 (Stainless steels for general purposes - Part 4: Bright products) | 70 | chevron_right |
| ISO 16172 ISO 16172 (Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe) | 5 | chevron_right |
| ISO 16220 ISO 16220 (Magnesium and magnesium alloys - Magnesium alloy ingots and castings) | 108 | chevron_right |
| ISO 1622-1 ISO 1622-1 (Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 7 | chevron_right |
| ISO 16293-1 ISO 16293-1 (Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties) | 1 | chevron_right |
| ISO 1634 ISO 1634 (Wrought copper and copper alloys - Rolled flat products (plate, sheet, strip) - Mechanical properties) | 54 | chevron_right |
| ISO 1634-1 ISO 1634-1 (Wrought copper and copper alloy plate, sheet and strip - Part 1: Technical conditions of delivery for plate, sheet and strip for general purposes) | 28 | chevron_right |
| ISO 1634-3 ISO 1634-3 (Wrought copper and copper alloy plate, sheet and strip - Part 3: Technical conditions of delivery for wrought copper alloy strip for springs) | 14 | chevron_right |
| ISO 1635 ISO 1635 (Wrought copper and copper alloys - Round tubes for general purposes - Mechanical properties) | 19 | chevron_right |
| ISO 1637 ISO 1637 (Wrought copper and copper alloy rod and bar - Technical conditions of delivery) | 68 | chevron_right |
| ISO 1638 ISO 1638 (Wrought copper and copper alloys - Drawn solid products supplied in coils or on reels - Mechanical properties) | 31 | chevron_right |
| ISO 1639 ISO 1639 (Wrought copper alloys - Extruded sections - Mechanical properties) | 8 | chevron_right |
| ISO 1640 ISO 1640 (Wrought copper alloys - Forgings - Mechanical properties) | 9 | chevron_right |
| ISO 1642 ISO 1642 (Plastics - Industrial laminated sheets based on thermosetting resins - Specification) | 36 | chevron_right |
| ISO 16650 ISO 16650 (Bead wire) | 5 | chevron_right |
| ISO 16834 ISO 16834 (Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification) | 47 | chevron_right |
| ISO 17087 ISO 17087 (Specifications for adhesives used for finger joints in non-structural lumber products) | 2 | chevron_right |
| ISO 17555 ISO 17555 (Plastics - Film and sheeting - Biaxially oriented polypropylene (PP) films) | 2 | chevron_right |
| ISO 17557 ISO 17557 (Plastics - Film and sheeting - Cast polypropylene (PP) films) | 4 | chevron_right |
| ISO 17615 ISO 17615 (Aluminium and aluminium alloys -- Alloyed ingots for remelting -- Specifications) | 41 | chevron_right |
| ISO 17633 ISO 17633 (Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification) | 94 | chevron_right |
| ISO 17634 ISO 17634 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification) | 23 | chevron_right |
| ISO 17672 ISO 17672 (Brazing - Filler metals) | 148 | chevron_right |
| ISO 17777 ISO 17777 (Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification) | 46 | chevron_right |
| ISO 17804 ISO 17804 (Founding - Ausferritic spheroidal graphite cast irons - Classification) | 13 | chevron_right |
| ISO 17832 ISO 17832 (Non-parallel steel wire and cords for tyre reinforcement) | 2 | chevron_right |
| ISO 18273 ISO 18273 (Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification) | 70 | chevron_right |
| ISO 18274 ISO 18274 (Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification) | 74 | chevron_right |
| ISO 18275 ISO 18275 (Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification) | 99 | chevron_right |
| ISO 18276 ISO 18276 (Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification) | 28 | chevron_right |
| ISO 18487-1 ISO 18487-1 (Aerospace series - Titanium tube for 35 MPa operating pressure - Part 1: Inch series) | 1 | chevron_right |
| ISO 185 ISO 185 (Grey cast irons - Classification) | 14 | chevron_right |
| ISO 1872-1 ISO 1872-1 (Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 59 | chevron_right |
| ISO 1873-1 ISO 1873-1 (Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 18 | chevron_right |
| ISO 1874-1 ISO 1874-1 (Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification) | 534 | chevron_right |
| ISO 18741 ISO 18741 (Ship and marine technology - High-manganese austenitic steel - Specification for high-manganese austenitic steel forgings for cryogenic temperature) | 2 | chevron_right |
| ISO 18760 ISO 18760 (Ships and marine technology - High-manganese austenitic steel - Longitudinally welded high-manganese austenitic steel pipes for cryogenic temperature) | 1 | chevron_right |
| ISO 18762 ISO 18762 (Tubes of titanium and titanium alloys - Welded tubes for condensers and heat exchangers - Technical delivery conditions) | 32 | chevron_right |
| ISO 19069-1 ISO 19069-1 (Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 33 | chevron_right |
| ISO 19203 ISO 19203 (Hot-dip galvanized and zinc-aluminium coated steel wires for bridge cables - Specifications) | 5 | chevron_right |
| ISO 19209 ISO 19209 (Adhesives - Classification of thermoplastic wood adhesives for non-structural applications) | 4 | chevron_right |
| ISO 19288 ISO 19288 (Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification) | 28 | chevron_right |
| ISO 19598 ISO 19598 (Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment) | 19 | chevron_right |
| ISO 19960 ISO 19960 (Cast steels and alloys with special physical properties) | 26 | chevron_right |
| ISO 20378 ISO 20378 (Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification) | 10 | chevron_right |
| ISO 20805 ISO 20805 (Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming) | 5 | chevron_right |
| ISO 2081 ISO 2081 (Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel) | 18 | chevron_right |
| ISO 2082 ISO 2082 (Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel) | 18 | chevron_right |
| ISO 209 ISO 209 (Wrought aluminium and aluminium alloys - Chemical composition) | 660 | chevron_right |
| ISO 209-1 ISO 209-1 (Wrought aluminium and aluminium alloys - Chemical composition and forms of products - Part 1: Chemical composition) | 68 | chevron_right |
| ISO 21305-1 ISO 21305-1 (Plastics - Polycarbonate (PC) molding and extrusion materials - Part 1: Designation system and basis for specification) | 7 | chevron_right |
| ISO 21334 ISO 21334 (Titanium and titanium alloys - Strip for welded tubes - Technical delivery conditions) | 17 | chevron_right |
| ISO 2179 ISO 2179 (Electroplated coatings of tin-nickel alloy - Specification and test methods) | 4 | chevron_right |
| ISO 21850-1 ISO 21850-1 (Dentistry - Materials for dental instruments - Part 1: Stainless steel) | 32 | chevron_right |
| ISO 21988 ISO 21988 (Abrasion-resistant cast irons - Classification) | 13 | chevron_right |
| ISO 22068 ISO 22068 (Sintered-metal injection-moulded materials - Specifications) | 36 | chevron_right |
| ISO 23213 ISO 23213 (Carbon steel wire for bedding and seating springs) | 6 | chevron_right |
| ISO 23515 ISO 23515 (Titanium and titanium alloys - Designation system) | 66 | chevron_right |
| ISO 23694 ISO 23694 (Wrought magnesium and magnesium alloys - Extruded rods/bars and tubes) | 15 | chevron_right |
| ISO 23700 ISO 23700 (Wrought magnesium and magnesium alloys - Rolled plates and sheets) | 41 | chevron_right |
| ISO 23717 ISO 23717 (Steel wire and wire products - Hose reinforcement wire) | 11 | chevron_right |
| ISO 24023-1 ISO 24023-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials, Part 1: Designation system and basis for specifications) | 2 | chevron_right |
| ISO 24034 ISO 24034 (Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification) | 72 | chevron_right |
| ISO 2408 ISO 2408 (Steel wire ropes for general purposes - Minimum requirements) | 5 | chevron_right |
| ISO 24314 ISO 24314 (Structural steels - Structural steels for building with improved seismic resistance - Technical delivery conditions) | 4 | chevron_right |
| ISO 24373 ISO 24373 (Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification) | 56 | chevron_right |
| ISO 2560 ISO 2560 (Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels) | 96 | chevron_right |
| ISO 2580-1 ISO 2580-1 (Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 41 | chevron_right |
| ISO 2604-1 ISO 2604-1 (Steel products for pressure purposes - Quality requirements - Part 1: Forgings) | 45 | chevron_right |
| ISO 2604-2 ISO 2604-2 (Steel products for pressure purposes - Quality requirements - Part 2: Wrought seamless tubes) | 37 | chevron_right |
| ISO 2604-3 ISO 2604-3 (Steel products for pressure purposes - Quality requirements - Part 3: Electric resistance and induction-welded tubes) | 13 | chevron_right |
| ISO 2604-4 ISO 2604-4 (Steel products for pressure purposes - Quality requirements - Part 4: Plates) | 5 | chevron_right |
| ISO 2604-5 ISO 2604-5 (Steel products for pressure purposes - Quality requirements - Part 5: Longitudinally welded austenitic stainless steel tubes) | 9 | chevron_right |
| ISO 2604-6 ISO 2604-6 (Steel products for pressure purposes - Quality requirements - Part 6: Submerged arc longitudinally or spirally welded steel tubes) | 12 | chevron_right |
| ISO 26202 ISO 26202 (Magnesium and magnesium alloys - Magnesium alloys for cast anodes) | 36 | chevron_right |
| ISO 26304 ISO 26304 (Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification) | 62 | chevron_right |
| ISO 26602 ISO 26602 (Fine ceramics (advanced ceramics, advanced technical ceramics) - Silicon nitride materials for rolling bearing balls and rollers) | 3 | chevron_right |
| ISO 2702 ISO 2702 (Fasteners - Heat treated tapping screws - Mechanical and physical properties) | 12 | chevron_right |
| ISO 2779 ISO 2779 (Aluminium machining alloys - Chemical composition and mechanical properties of alloys Al-Cu6 Bi Pb and Al-Cu4 Pb Mg) | 2 | chevron_right |
| ISO 28078-1 ISO 28078-1 (Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 32 | chevron_right |
| ISO 2892 ISO 2892 (Austenitic cast irons - Classification) | 32 | chevron_right |
| ISO 28941-1 ISO 28941-1 (Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 20 | chevron_right |
| ISO 2897-1 ISO 2897-1 (Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 12 | chevron_right |
| ISO 2898-1 ISO 2898-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 2 | chevron_right |
| ISO 2937 ISO 2937 (Plain end seamless steel tubes for mechanical application) | 5 | chevron_right |
| ISO 2938 ISO 2938 (Hollow steel bars for machining) | 2 | chevron_right |
| ISO 29988-1 ISO 29988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 22 | chevron_right |
| ISO 301 ISO 301 (Zinc alloy ingots intended for castings) | 18 | chevron_right |
| ISO 3115 ISO 3115 (Castings in magnesium alloys containing zirconium - Chemical composition and mechanical properties) | 7 | chevron_right |
| ISO 3116 ISO 3116 (Magnesium and magnesium alloys - Wrought magnesium and magnesium alloys) | 143 | chevron_right |
| ISO 3183 ISO 3183 (Petroleum and natural gas industries - Steel pipe for pipeline transportation systems) | 204 | chevron_right |
| ISO 3183-1 ISO 3183-1 (Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 1: Pipes of requirement class A) | 9 | chevron_right |
| ISO 3183-2 ISO 3183-2 (Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 2: Pipes of requirements class B) | 16 | chevron_right |
| ISO 3183-3 ISO 3183-3 (Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 3: Pipes of requirement class C) | 25 | chevron_right |
| ISO 3304 ISO 3304 (Plain end seamless precision steel tubes - Technical conditions for delivery) | 5 | chevron_right |
| ISO 3305 ISO 3305 (Plain end welded precision steel tubes - Technical conditions for delivery) | 5 | chevron_right |
| ISO 3306 ISO 3306 (Plain end as-welded and sized precision steel tubes - Technical conditions for delivery) | 5 | chevron_right |
| ISO 3335 ISO 3335 (Extruded solid profiles in aluminium-zinc- magnesium alloy Al Zn4,5 Mg1 (7020) - Chemical composition and mechanical properties) | 2 | chevron_right |
| ISO 3448 ISO 3448 (Industrial liquid lubricants - ISO viscosity classification) | 20 | chevron_right |
| ISO 3506-1 ISO 3506-1 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes.) | 40 | chevron_right |
| ISO 3506-2 ISO 3506-2 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes) | 80 | chevron_right |
| ISO 3506-3 ISO 3506-3 (Fasteners - Mechanical properties of corrosion resistant stainless steel fasteners - Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes) | 20 | chevron_right |
| ISO 3506-4 ISO 3506-4 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws with specified grades and hardness classes) | 28 | chevron_right |
| ISO 3506-5 ISO 3506-5 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications) | 9 | chevron_right |
| ISO 3506-6 ISO 3506-6 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners) | 41 | chevron_right |
| ISO 3506-7 ISO 3506-7 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 7: Flat washers with specified grades and property classes) | 18 | chevron_right |
| ISO 3522 ISO 3522 (Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties) | 56 | chevron_right |
| ISO 3573 ISO 3573 (Hot-rolled carbon steel sheet of commercial and drawing qualities) | 4 | chevron_right |
| ISO 3574 ISO 3574 (Cold-reduced carbon steel sheet of commercial and drawing qualities) | 5 | chevron_right |
| ISO 3575 ISO 3575 (Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities) | 17 | chevron_right |
| ISO 3580 ISO 3580 (Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification) | 67 | chevron_right |
| ISO 3581 ISO 3581 (Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification) | 44 | chevron_right |
| ISO 3755 ISO 3755 (Cast carbon steels for general engineering purposes) | 8 | chevron_right |
| ISO 4042 ISO 4042 (Fasteners - Electroplated coating systems) | 103 | chevron_right |
| ISO 426-1 ISO 426-1 (Wrought copper-zinc alloys - Chemical composition and forms of wrought products - Part 1: Non-leaded and special copper-zinc alloys) | 25 | chevron_right |
| ISO 426-2 ISO 426-2 (Wrought copper-zinc alloys - Chemical composition and forms of wrought products - Part 2: Leaded copper-zinc alloys) | 14 | chevron_right |
| ISO 427 ISO 427 (Wrought copper-tin alloys - Chemical composition and forms of wrought products) | 8 | chevron_right |
| ISO 428 ISO 428 (Wrought copper-aluminium alloys - Chemical composition and forms of wrought products) | 11 | chevron_right |
| ISO 429 ISO 429 (Wrought copper-nickel alloys - Chemical composition and forms of wrought products) | 6 | chevron_right |
| ISO 430 ISO 430 (Wrought copper-nickel-zinc alloys - Chemical composition and forms of wrought products) | 9 | chevron_right |
| ISO 431 ISO 431 (Copper refinery shapes) | 15 | chevron_right |
| ISO 4381 ISO 4381 (Plain bearings - Tin casting alloys for multilayer plain bearings) | 7 | chevron_right |
| ISO 4382-1 ISO 4382-1 (Plain bearings - Copper alloys - Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings) | 10 | chevron_right |
| ISO 4382-2 ISO 4382-2 (Plain bearings - Copper alloys - Part 2: Wrought copper alloys for solid plain bearings) | 4 | chevron_right |
| ISO 4525 ISO 4525 (Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials) | 19 | chevron_right |
| ISO 4526 ISO 4526 (Metallic coatings - Electroplated coatings of nickel for engineering purposes) | 6 | chevron_right |
| ISO 4613-1 ISO 4613-1 (Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification) | 52 | chevron_right |
| ISO 4738 ISO 4738 (Copper drawing stock (wire rod)) | 10 | chevron_right |
| ISO 4894-1 ISO 4894-1 (Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 3 | chevron_right |
| ISO 4950-2 ISO 4950-2 (High yield strength flat steel products - Part 2: Products supplied in the normalized or controlled rolled condition) | 12 | chevron_right |
| ISO 4950-3 ISO 4950-3 (High yield strength flat steel products - Part 3: Products supplied in the heat-treated (quenched and tempered) condition) | 12 | chevron_right |
| ISO 4951 ISO 4951 (High yield strength steel bars and sections) | 6 | chevron_right |
| ISO 4951-2 ISO 4951-2 (High yield strength steel bars and sections - Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels) | 6 | chevron_right |
| ISO 4951-3 ISO 4951-3 (High yield strength steel bars and sections - Part 3: Delivery conditions for thermomechanically-rolled steels) | 6 | chevron_right |
| ISO 4952 ISO 4952 (Structural steels with improved atmospheric corrosion resistance) | 32 | chevron_right |
| ISO 4954 ISO 4954 (Steels for cold heading and cold extruding) | 188 | chevron_right |
| ISO 4954-1 ISO 4954-1 (Steels for cold heading and cold extruding - Technical delivery conditions - Part 1: Non-alloy and alloy steels) | 87 | chevron_right |
| ISO 4954-2 ISO 4954-2 (Steels for cold heading and cold extruding - Technical delivery conditions - Part 2: Stainless steels) | 43 | chevron_right |
| ISO 4955 ISO 4955 (Heat-resistant steels) | 93 | chevron_right |
| ISO 4957 ISO 4957 (Tool steels) | 87 | chevron_right |
| ISO 4960 ISO 4960 (Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %) | 12 | chevron_right |
| ISO 4977-2 ISO 4977-2 (Double cold-reduced electrolytic tinplate - Part 2: Coil for subsequent cutting into sheets) | 3 | chevron_right |
| ISO 4978 ISO 4978 (Steel sheet and strip for welded gas cylinders) | 10 | chevron_right |
| ISO 4991 ISO 4991 (Steel castings for pressure purposes) | 118 | chevron_right |
| ISO 4995 ISO 4995 (Hot-rolled steel sheet of structural quality) | 9 | chevron_right |
| ISO 4996 ISO 4996 (Hot-rolled steel sheet of high yield stress structural quality) | 15 | chevron_right |
| ISO 4997 ISO 4997 (Cold-reduced carbon steel sheet of structural quality) | 11 | chevron_right |
| ISO 4998 ISO 4998 (Steel sheet, zinc‐coated and zinc‐iron alloy‐coated by the continuous hot‐dip process, of structural quality) | 19 | chevron_right |
| ISO 4999 ISO 4999 (Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities) | 23 | chevron_right |
| ISO 5000 ISO 5000 (Steel sheet, aluminium-silicon alloy coated by the continuous hot-dip process, of commercial and drawing qualities) | 13 | chevron_right |
| ISO 5001 ISO 5001 (Cold-reduced carbon steel sheet for vitreous enamelling) | 5 | chevron_right |
| ISO 5002 ISO 5002 (Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities) | 23 | chevron_right |
| ISO 5182 ISO 5182 (Resistance welding - Materials for electrodes and ancillary equipment) | 29 | chevron_right |
| ISO 5445 ISO 5445 (Ferrosilicon - Specification and conditions of delivery) | 12 | chevron_right |
| ISO 5446 ISO 5446 (Ferromanganese - Specification and conditions of delivery) | 65 | chevron_right |
| ISO 5447 ISO 5447 (Ferrosilicomanganese - Specification and conditions of delivery) | 14 | chevron_right |
| ISO 5449 ISO 5449 (Ferrosilicochromium - Specification and conditions of delivery) | 12 | chevron_right |
| ISO 5450 ISO 5450 (Ferrotungsten - Specification and conditions of delivery) | 2 | chevron_right |
| ISO 5451 ISO 5451 (Ferrovanadium - Specification and conditions of delivery) | 9 | chevron_right |
| ISO 5452 ISO 5452 (Ferromolybdenum - Specification and conditions of delivery) | 6 | chevron_right |
| ISO 5453 ISO 5453 (Ferroniobium - Specification and conditions of delivery) | 7 | chevron_right |
| ISO 5454 ISO 5454 (Ferrotitanium - Specification and conditions of delivery) | 8 | chevron_right |
| ISO 559 ISO 559 (Steel tubes for water and sewage) | 5 | chevron_right |
| ISO 5755 ISO 5755 (Sintered metal materials. Specifications (ISO 5755:2022)) | 337 | chevron_right |
| ISO 5755-1 ISO 5755-1 (Materials, for bearings, impregnated with liquid lubricant) | 13 | chevron_right |
| ISO 5755-2 ISO 5755-2 (Sintered metal materials - Specifications - Part 2: Sintered iron and sintered steel containing one or both of the elements carbon and copper, used for structural parts) | 30 | chevron_right |
| ISO 5755-3 ISO 5755-3 (Sintered metal materials - Specifications - Part 3: Sintered alloyed and sintered stainless steels used for structural parts) | 30 | chevron_right |
| ISO 5832-1 ISO 5832-1 (Implants for surgery - Metallic materials - Part 1: Wrought stainless steel) | 1 | chevron_right |
| ISO 5832-10 ISO 5832-10 (Implants for surgery-metallic materials - Part 10: Wrought titanium-5, alluminium-2.5, iron- alloy) | 1 | chevron_right |
| ISO 5832-11 ISO 5832-11 (Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy) | 1 | chevron_right |
| ISO 5832-12 ISO 5832-12 (Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy) | 2 | chevron_right |
| ISO 5832-14 ISO 5832-14 (Implants for surgery - Metallic materials - Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy) | 1 | chevron_right |
| ISO 5832-2 ISO 5832-2 (Implants for surgery - Metallic materials - Part 2: Unalloyed titanium) | 6 | chevron_right |
| ISO 5832-3 ISO 5832-3 (Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy) | 2 | chevron_right |
| ISO 5832-4 ISO 5832-4 (Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy) | 1 | chevron_right |
| ISO 5832-5 ISO 5832-5 (Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel) | 1 | chevron_right |
| ISO 5832-6 ISO 5832-6 (Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy) | 1 | chevron_right |
| ISO 5832-7 ISO 5832-7 (Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy) | 1 | chevron_right |
| ISO 5832-8 ISO 5832-8 (Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy) | 1 | chevron_right |
| ISO 5832-9 ISO 5832-9 (Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel) | 1 | chevron_right |
| ISO 5834-1 ISO 5834-1 (Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form) | 3 | chevron_right |
| ISO 5834-2 ISO 5834-2 (Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms) | 3 | chevron_right |
| ISO 5922 ISO 5922 (Malleable cast iron) | 29 | chevron_right |
| ISO 5950 ISO 5950 (Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities) | 4 | chevron_right |
| ISO 5951 ISO 5951 (Hot-rolled steel sheet of higher yield strength with improved formability) | 6 | chevron_right |
| ISO 5952 ISO 5952 (Steel sheet, hot-rolled, of structural quality with improved atmospheric corrosion resistance) | 10 | chevron_right |
| ISO 5954 ISO 5954 (Cold-reduced carbon steel sheet according to hardness requirements) | 5 | chevron_right |
| ISO 610 ISO 610 (High-tensile steel chains (round link) for chain conveyors and coal ploughs) | 3 | chevron_right |
| ISO 6207 ISO 6207 (Seamless nickel and nickel alloy tube) | 56 | chevron_right |
| ISO 6208 ISO 6208 (Nickel and nickel alloy plate, sheet and strip) | 66 | chevron_right |
| ISO 6279 ISO 6279 (Plain bearings - Aluminium alloys for solid bearings) | 6 | chevron_right |
| ISO 6283 ISO 6283 (Refined nickel) | 8 | chevron_right |
| ISO 630 ISO 630 (Structural steels - Plates, wide flats, bars, sections and profiles) | 23 | chevron_right |
| ISO 630-2 ISO 630-2 (Structural steels - Part 2: Technical delivery conditions for structural steels for general purposes) | 40 | chevron_right |
| ISO 630-3 ISO 630-3 (Structural steels - Part 3: Technical delivery conditions for fine-grain structural steels) | 56 | chevron_right |
| ISO 630-4 ISO 630-4 (Structural steels - Part 4: Technical delivery conditions for high yield strength quenched and tempered structural steel plates and wide flats) | 30 | chevron_right |
| ISO 630-5 ISO 630-5 (Structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance) | 42 | chevron_right |
| ISO 6305-2 ISO 6305-2 (Railway components - Technical delivery requirements - Part 2: Non-alloy carbon steel baseplates) | 2 | chevron_right |
| ISO 630-6 ISO 630-6 (Structural steels - Part 6: Technical delivery conditions for seismic-improved structural steels for building) | 5 | chevron_right |
| ISO 6316 ISO 6316 (Hot-rolled steel strip of structural quality) | 9 | chevron_right |
| ISO 6317 ISO 6317 (Hot-rolled carbon steel strip of commercial and drawing qualities) | 4 | chevron_right |
| ISO 636 ISO 636 (Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification) | 37 | chevron_right |
| ISO 6361-2 ISO 6361-2 (Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2: Mechanical properties) | 93 | chevron_right |
| ISO 6361-5 ISO 6361-5 (Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 5: Chemical composition) | 70 | chevron_right |
| ISO 6362-2 ISO 6362-2 (Wrought aluminium and aluminium alloys extruded rods/bars, tubes and profiles - Part 2: Mechanical properties) | 102 | chevron_right |
| ISO 6362-7 ISO 6362-7 (Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 7: Chemical composition) | 84 | chevron_right |
| ISO 6363-2 ISO 6363-2 (Wrought aluminium and aluminium alloys - Cold-drawn rods/bars, tubes and wires - Part 2: Mechanical properties) | 84 | chevron_right |
| ISO 6402-1 ISO 6402-1 (Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 25 | chevron_right |
| ISO 6435 ISO 6435 (Stainless steel bars for the reinforcement of concrete) | 28 | chevron_right |
| ISO 6474-1 ISO 6474-1 (Implants for surgery - Ceramic materials - Part 1: Ceramic materials based on high purity alumina) | 2 | chevron_right |
| ISO 6474-2 ISO 6474-2 (Implants for surgery - Ceramic materials - Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement) | 2 | chevron_right |
| ISO 6501 ISO 6501 (Ferronickel - Specification and delivery requirements) | 5 | chevron_right |
| ISO 6621-3 ISO 6621-3 (Internal combustion engines - Piston rings - Part 3: Material specifications) | 28 | chevron_right |
| ISO 683-1 ISO 683-1 (Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering) | 64 | chevron_right |
| ISO 683-10 ISO 683-10 (Heat-treatable steels, alloy steels and free-cutting steels - Part 10: Wrought nitriding steels) | 3 | chevron_right |
| ISO 683-11 ISO 683-11 (Heat-treatable steels, alloy steels and free-cutting steels - Part 11: Wrought case-hardening steels) | 31 | chevron_right |
| ISO 683-13 ISO 683-13 (Heat-treatable steels, alloy steels and free-cutting steels - Part 13: Wrought stainless steels) | 36 | chevron_right |
| ISO 683-14 ISO 683-14 (Heat-treatable steels, alloy steels and free-cutting steels - Part 14: Hot-rolled steels for quenched and tempered springs) | 15 | chevron_right |
| ISO 683-15 ISO 683-15 (Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines) | 13 | chevron_right |
| ISO 683-16 ISO 683-16 (Heat-treated steels, alloy steels and free-cutting steels - Part 16: Precipitation hardening stainless steels) | 9 | chevron_right |
| ISO 683-17 ISO 683-17 (Heat-treatable steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels) | 38 | chevron_right |
| ISO 683-18 ISO 683-18 (Heat-treatable steels, alloy steels and free - cutting steels - Part 18: Bright products of unalloyed and low alloy steels) | 182 | chevron_right |
| ISO 683-2 ISO 683-2 (Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering) | 25 | chevron_right |
| ISO 683-3 ISO 683-3 (Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels) | 36 | chevron_right |
| ISO 683-4 ISO 683-4 (Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels) | 21 | chevron_right |
| ISO 683-5 ISO 683-5 (Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels) | 11 | chevron_right |
| ISO 683-6 ISO 683-6 (Heat-treatable steels, alloy steels and free-cutting steels - Part 6: Hot-rolled steels for quenched and tempered springs) | 10 | chevron_right |
| ISO 683-7 ISO 683-7 (Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels) | 85 | chevron_right |
| ISO 683-9 ISO 683-9 (Heat-treatable steels, alloy steels and free-cutting steels - Part 9: Wrought free-cutting steels) | 12 | chevron_right |
| ISO 6848 ISO 6848 (Arc welding and cutting - Nonconsumable tungsten electrodes - Classification) | 11 | chevron_right |
| ISO 6871-1 ISO 6871-1 (Dental base metal casting alloys - Part 1: Cobalt-based alloys) | 1 | chevron_right |
| ISO 6930 ISO 6930 (High yield strength flat steel products for cold forming) | 25 | chevron_right |
| ISO 6930-1 ISO 6930-1 (High yield strength steel plates and wide flats for cold forming - Part 1: Delivery conditions for thermomechanically-rolled steels) | 9 | chevron_right |
| ISO 6930-2 ISO 6930-2 (High yield strength steel plates and wide flats for cold forming - Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels) | 6 | chevron_right |
| ISO 6931-1 ISO 6931-1 (Stainless steels for springs - Part 1: Wire) | 18 | chevron_right |
| ISO 6931-2 ISO 6931-2 (Stainless steels for springs - Part 2: Narrow strip) | 13 | chevron_right |
| ISO 6932 ISO 6932 (Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %) | 9 | chevron_right |
| ISO 6934-2 ISO 6934-2 (Steel for the prestressing of concrete - Part 2: Cold-drawn wire) | 1 | chevron_right |
| ISO 6934-5 ISO 6934-5 (Steel for the prestressing of concrete - Part 5: Hot-rolled steel bars with or without subsequent processing) | 7 | chevron_right |
| ISO 6935-1 ISO 6935-1 (Steel for the reinforcement of concrete - Part 1: Plain bars) | 12 | chevron_right |
| ISO 6935-2 ISO 6935-2 (Steel for the reinforcement of concrete - Part 2: Ribbed bars) | 38 | chevron_right |
| ISO 6984 ISO 6984 (Round non-alloy steel wires for stranded wire ropes for mine hoisting - Specifications) | 3 | chevron_right |
| ISO 7153-1 ISO 7153-1 (Surgical instruments - Materials - Part 1: Metals) | 50 | chevron_right |
| ISO 7209 ISO 7209 (Titanium and titanium alloys - Plate, sheet and strip - Technical delivery conditions) | 30 | chevron_right |
| ISO 7217 ISO 7217 (Titanium and titanium alloys - Bar, rod and billet - Technical delivery conditions) | 34 | chevron_right |
| ISO 7391-1 ISO 7391-1 (Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 60 | chevron_right |
| ISO 752 ISO 752 (Zinc ingots) | 5 | chevron_right |
| ISO 7599 ISO 7599 (Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium) | 5 | chevron_right |
| ISO 7792-1 ISO 7792-1 (Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 225 | chevron_right |
| ISO 7823-1 ISO 7823-1 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets) | 1 | chevron_right |
| ISO 7823-2 ISO 7823-2 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets) | 1 | chevron_right |
| ISO 7823-3 ISO 7823-3 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets) | 1 | chevron_right |
| ISO 8257-1 ISO 8257-1 (Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 37 | chevron_right |
| ISO 8287 ISO 8287 (Magnesium and magnesium alloys - Unalloyed magnesium - Chemical composition) | 15 | chevron_right |
| ISO 8353 ISO 8353 (Steel sheet, zinc-aluminium-magnesium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities) | 102 | chevron_right |
| ISO 8457-2 ISO 8457-2 (Steel wire rod - Part 2: Quality requirements for unalloyed steel wire rods for conversion to wire) | 131 | chevron_right |
| ISO 8458-2 ISO 8458-2 (Steel wire for mechanical springs - Part 2: Patented cold-drawn non-alloy steel wire) | 41 | chevron_right |
| ISO 8458-3 ISO 8458-3 (Steel wire for mechanical springs - Part 3: Oil-hardened and tempered wire) | 19 | chevron_right |
| ISO 8839 ISO 8839 (Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals) | 28 | chevron_right |
| ISO 898-1 ISO 898-1 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread) | 10 | chevron_right |
| ISO 898-2 ISO 898-2 (Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes) | 9 | chevron_right |
| ISO 898-3 ISO 898-3 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes) | 4 | chevron_right |
| ISO 898-5 ISO 898-5 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses) | 4 | chevron_right |
| ISO 898-6 ISO 898-6 (Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread) | 7 | chevron_right |
| ISO 8986-1 ISO 8986-1 (Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 16 | chevron_right |
| ISO 9147 ISO 9147 (Pig-irons - Definition and classification) | 13 | chevron_right |
| ISO 9327-2 ISO 9327-2 (Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties) | 9 | chevron_right |
| ISO 9327-3 ISO 9327-3 (Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 3: Nickel steels with specified low temperature properties) | 7 | chevron_right |
| ISO 9327-4 ISO 9327-4 (Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof strength) | 16 | chevron_right |
| ISO 9327-5 ISO 9327-5 (Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels) | 31 | chevron_right |
| ISO 9328-2 ISO 9328-2 (Steel flat products for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steels with specified elevated temperature properties) | 61 | chevron_right |
| ISO 9328-3 ISO 9328-3 (Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized) | 36 | chevron_right |
| ISO 9328-3 ISO 9328-3 (Steel plates and strips for pressure purposes - Technical delivery conditions - Part 3: Nickel-alloyed steels with specified low temperature properties) | 6 | chevron_right |
| ISO 9328-4 ISO 9328-4 (Steel flat products for pressure purposes - Technical delivery conditions - Part 4: Nickel-alloy steels with specified low temperature properties) | 59 | chevron_right |
| ISO 9328-5 ISO 9328-5 (Steel plates and strips for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled) | 43 | chevron_right |
| ISO 9328-6 ISO 9328-6 (Steel flat products for pressure purposes - Technical delivery conditions - Part 6: Weldable fine grain steels, quenched and tempered) | 30 | chevron_right |
| ISO 9328-7 ISO 9328-7 (Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels) | 62 | chevron_right |
| ISO 9329-1 ISO 9329-1 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Unalloyed steels with specified room temperature properties) | 4 | chevron_right |
| ISO 9329-2 ISO 9329-2 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties) | 18 | chevron_right |
| ISO 9329-3 ISO 9329-3 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties) | 10 | chevron_right |
| ISO 9329-4 ISO 9329-4 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels) | 17 | chevron_right |
| ISO 9330-1 ISO 9330-1 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Unalloyed steel tubes with specified room temperature properties) | 5 | chevron_right |
| ISO 9330-2 ISO 9330-2 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties) | 7 | chevron_right |
| ISO 9330-3 ISO 9330-3 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties) | 8 | chevron_right |
| ISO 9330-4 ISO 9330-4 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties) | 7 | chevron_right |
| ISO 9330-5 ISO 9330-5 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties) | 9 | chevron_right |
| ISO 9330-6 ISO 9330-6 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes) | 12 | chevron_right |
| ISO 9351 ISO 9351 (Galvanic anodes for cathodic protection in seawater and saline sediments) | 13 | chevron_right |
| ISO 9364 ISO 9364 (Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities) | 17 | chevron_right |
| ISO 9453 ISO 9453 (Soft solder alloys - Chemical compositions and forms) | 147 | chevron_right |
| ISO 9477 ISO 9477 (High strength cast steels for general engineering and structural purposes) | 4 | chevron_right |
| ISO 9722 ISO 9722 (Nickel and nickel alloys - Composition and forms of wrought products) | 72 | chevron_right |
| ISO 9723 ISO 9723 (Nickel and nickel alloy bars) | 64 | chevron_right |
| ISO 9724 ISO 9724 (Nickel and nickel alloy wire and drawing stock) | 56 | chevron_right |
| ISO 9725 ISO 9725 (Nickel and nickel alloy forgings) | 58 | chevron_right |
| ISO 9975 ISO 9975 (Round non-alloy steel wires for locked coil mine winding ropes - Specifications) | 1 | chevron_right |
| ISO 9988-1 ISO 9988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 97 | chevron_right |
| ISO/R 115 ISO/R 115 (Classification and composition of unalloyed aluminium ingots for remelting) | 4 | chevron_right |
| ISO/R 164 ISO/R 164 (Composition of aluminium alloy castings) | 22 | chevron_right |
| ISO/R 2147 ISO/R 2147 (Aluminium alloys - Sand cast test pieces - Mechanical properties) | 5 | chevron_right |
| ISO/TR 11637 ISO/TR 11637 (Boron treated engineering steels for quenching and tempering) | 11 | chevron_right |
| ISO/TR 2136 ISO/TR 2136 (Wrought aluminium and aluminium alloys - Rolled products - Mechanical properties) | 34 | chevron_right |
| ISO/TR 2778 ISO/TR 2778 (Wrought aluminium and aluminium alloys -- Drawn tubes -- Mechanical properties) | 31 | chevron_right |
| ISO/TR 4956 ISO/TR 4956 (Wrought steels for use at elevated temperatures in engines) | 11 | chevron_right |
| ISO/TR 945-3 ISO/TR 945-3 (Microstructure of cast irons - Part 3: Matrix structures) | 41 | chevron_right |
| ISO/TS 15510 ISO/TS 15510 (Stainless steels - Chemical composition) | 82 | chevron_right |