DIN
Standard · Germany · 1604 references
| Standard number | Materials | |
|---|---|---|
| Alloy special structural steels | 8 | chevron_right |
| Alloyed CoCrMoV steel | 4 | chevron_right |
| Alloyed CoNiCr Steel | 2 | chevron_right |
| Alloyed CrMn steel | 5 | chevron_right |
| Alloyed CrMn steel for cementation | 2 | chevron_right |
| Alloyed CrMnMoV steel; heat-treatable steel | 3 | chevron_right |
| Alloyed CrMnNi Steel | 1 | chevron_right |
| Alloyed CrMo steel | 13 | chevron_right |
| Alloyed CrMoNiW steel | 2 | chevron_right |
| Alloyed CrMoV steel | 24 | chevron_right |
| Alloyed CrMoV tool steel | 2 | chevron_right |
| Alloyed CrMoVS steel | 2 | chevron_right |
| Alloyed CrMoW steel | 4 | chevron_right |
| Alloyed CrNi steel | 2 | chevron_right |
| Alloyed CrNiMn steel | 2 | chevron_right |
| Alloyed CrNiMnMo Steel | 4 | chevron_right |
| Alloyed CrNiMo Steel | 4 | chevron_right |
| Alloyed CrNiMoV steel | 8 | chevron_right |
| Alloyed CrNiMoVS steel; Free-cutting steel | 2 | chevron_right |
| Alloyed CrSiMoV steel | 2 | chevron_right |
| Alloyed CrSiV steel | 2 | chevron_right |
| Alloyed CrV steel | 6 | chevron_right |
| Alloyed CrVMo steel | 5 | chevron_right |
| Alloyed CrVMoW steel | 2 | chevron_right |
| Alloyed CrVW steel | 2 | chevron_right |
| Alloyed MnCr steel | 2 | chevron_right |
| Alloyed MnCrMo steel | 2 | chevron_right |
| Alloyed MnCrV steel | 2 | chevron_right |
| Alloyed MnCrW steel | 2 | chevron_right |
| Alloyed MnNiCr steel | 1 | chevron_right |
| Alloyed MnNiCrV steel | 2 | chevron_right |
| Alloyed MnSiMo steel | 2 | chevron_right |
| Alloyed MnSiV steel | 2 | chevron_right |
| Alloyed MoNi steel | 2 | chevron_right |
| Alloyed MoV steel | 2 | chevron_right |
| Alloyed NiCr steel | 14 | chevron_right |
| Alloyed NiCrMo steel | 21 | chevron_right |
| Alloyed NiCrMo steel for cutting tool and cold work tool steel | 1 | chevron_right |
| Alloyed NiCrMoV steel | 8 | chevron_right |
| Alloyed NiCrMoW steel | 2 | chevron_right |
| Alloyed NiCrV steel | 2 | chevron_right |
| Alloyed NiMo steel | 3 | chevron_right |
| Alloyed Si steel | 2 | chevron_right |
| Alloyed SiCr steel | 4 | chevron_right |
| Alloyed SiCrV steel | 4 | chevron_right |
| Alloyed V steel | 2 | chevron_right |
| Alloyed VCrMoW steel | 2 | chevron_right |
| Alloyed W steel | 6 | chevron_right |
| Alloyed WCr steel | 2 | chevron_right |
| Alloyed WCrCoV steel | 2 | chevron_right |
| Alloyed WCrMoV steel | 4 | chevron_right |
| Alloyed WCrV steel | 8 | chevron_right |
| Alloyed WV steel | 2 | chevron_right |
| Carbon heat-treatable steel | 14 | chevron_right |
| Carbon heat-treatable steel, with lead | 5 | chevron_right |
| Carbon heat-treatable steel, with lead for quenching and tempering | 7 | chevron_right |
| Carbon heat-treatable steel, with Pb | 4 | chevron_right |
| Carbon steel | 22 | chevron_right |
| Case hardening steels | 1 | chevron_right |
| Casting CoCrMo alloys | 2 | chevron_right |
| Casting NiCrCo alloy | 1 | chevron_right |
| Casting NiCrMo alloy | 2 | chevron_right |
| CoCrMo alloy casting | 1 | chevron_right |
| CoCrNiFeMo alloy | 2 | chevron_right |
| CoCrNiMoW alloy; High-temperature resisting material | 2 | chevron_right |
| Cold formed welded structural hollow sections of non-alloy and fine grain steels | 1 | chevron_right |
| Cold rolled strip, sheet and Bake-Hardening higher yield strength steels for cold forming | 5 | chevron_right |
| Cold work cool steels for castings | 10 | chevron_right |
| Constructional carbon steel | 3 | chevron_right |
| Constructional low alloyed Mn steel | 2 | chevron_right |
| Constructional low carbon steel | 2 | chevron_right |
| DIN 1017-1 DIN 1017-1 (Steel Bars; Hot Rolled Flat Steel for General Purpose, Dimensions, Weights, Permissible Variations) | 1 | chevron_right |
| DIN 13912 DIN 13912 (Dentistry - Dental casting alloys - Basis nickel, cobalt, iron) | 1 | chevron_right |
| DIN 1611 DIN 1611 (Mild unalloyed engineering steels) | 6 | chevron_right |
| DIN 1614-1 DIN 1614-1 (Steel flat products; hot rolled sheet and strip; technical delivery conditions; mild unalloyed steels for cold reducing) | 14 | chevron_right |
| DIN 1614-2 DIN 1614-2 (Steel flat products; hot rolled sheet and strip; technical delivery conditions; mild unalloyed steels for immediate cold forming) | 8 | chevron_right |
| DIN 1615 DIN 1615 (Welded circular tubes of unalloyed steel without special quality requirements; technical conditions of delivery) | 2 | chevron_right |
| DIN 1621 DIN 1621 (Rolled ingot steel, iron plate (Heavy plates over 4,75 mm)) | 2 | chevron_right |
| DIN 1622 DIN 1622 (Steel plate, thickness up to 3-4,75 mm (Medium sheet). Technical delivery conditiones) | 10 | chevron_right |
| DIN 1623 DIN 1623 (Cold rolled strip and sheet - Technical delivery conditions - General structural steels) | 19 | chevron_right |
| DIN 1623-1 DIN 1623-1 (Steel flat products; Cold rolled sheet and strip; Technical delivery conditions; Mild unalloyed steels for cold forming) | 14 | chevron_right |
| DIN 1623-2 DIN 1623-2 (Steel flat products; cold reduced sheet and strip; technical delivery conditions; general purpose structural steels) | 27 | chevron_right |
| DIN 1623-3 DIN 1623-3 (Steel flat products; cold reduced sheet and strip; technical delivery conditions; mild unalloyed steels for vitreous enamelling) | 8 | chevron_right |
| DIN 1624 DIN 1624 (Steel flat products; cold reduced mild unalloyed steel strip in widths not exceeding 650 mm; technical delivery conditions) | 8 | chevron_right |
| DIN 1626 DIN 1626 (Welded circular unalloyed steel tubes subject to special requirements; technical delivery conditions) | 8 | chevron_right |
| DIN 1626-2 DIN 1626-2 (Welded Steel Pipes in Unalloyed and Low Alloy Steels for Supply Purposes, Process Plant and Tanks; Pipes for General Use (Commercial Quality), Technical Conditions of Delivery) | 6 | chevron_right |
| DIN 1626-3 DIN 1626-3 (Welded Steel Pipes in Unalloyed and Low Alloy Steels for Supply Purposes, Process Plant and Tanks; Pipes with Quality Specifications, Technical Conditions of Delivery) | 7 | chevron_right |
| DIN 1626-4 DIN 1626-4 (Welded Steel Pipes in Unalloyed and Low Alloy Steels for Supply Purposes, Process Plant and Tanks; Specially Tested Pipes with Quality Specifications, Technical Conditions of Delivery) | 7 | chevron_right |
| DIN 1628 DIN 1628 (High performance welded circular unalloyed steel tubes; technical delivery conditions) | 6 | chevron_right |
| DIN 1629 DIN 1629 (Seamless circular unalloyed steel tubes subject to special requirements; technical delivery conditions) | 10 | chevron_right |
| DIN 1629-2 DIN 1629-2 (Seamless unalloyed steel pipes for pipelines, apparatus and tanks) | 2 | chevron_right |
| DIN 1629-3 DIN 1629-3 (Seamless unalloyed steel pipes for pipelines, apparatus and tanks; Pipes with special quality specifications) | 8 | chevron_right |
| DIN 1629-4 DIN 1629-4 (Seamless unalloyed steel pipes for pipelines, apparatus and tanks) | 8 | chevron_right |
| DIN 1630 DIN 1630 (High performance seamless circular unalloyed steel tubes; technical delivery conditions) | 6 | chevron_right |
| DIN 1651 DIN 1651 (Free-cutting steels; technical delivery conditions) | 51 | chevron_right |
| DIN 1652 DIN 1652 (Bright Unalloyed Steel; Technical Conditions of Delivery) | 42 | chevron_right |
| DIN 1652-2 DIN 1652-2 (Bright steel made from structural steel; technical delivery conditions) | 40 | chevron_right |
| DIN 1652-3 DIN 1652-3 (Bright steel made from case hardening steel; technical delivery conditions) | 38 | chevron_right |
| DIN 1652-4 DIN 1652-4 (Bright steel made from steel for quenching and tempering; technical delivery conditions) | 78 | chevron_right |
| DIN 1654-2 DIN 1654-2 (Cold heading and cold extruding steels; technical delivery conditions for killed unalloyed steels not intended for heat treatment) | 8 | chevron_right |
| DIN 1654-3 DIN 1654-3 (Cold heading and cold extruding steels; technical delivery conditions for case hardening steels) | 14 | chevron_right |
| DIN 1654-4 DIN 1654-4 (Cold heading and cold extruding steels; technical delivery conditions for steels for quenching and tempering) | 34 | chevron_right |
| DIN 1654-5 DIN 1654-5 (Cold heading and cold extruding steels; technical delivery conditions for stainless steels) | 20 | chevron_right |
| DIN 1669 DIN 1669 (Spring steels for leaf and elliptic springs) | 6 | chevron_right |
| DIN 16773-1 DIN 16773-1 (Plastic moulding materials; polyamide(PA) homopolymeres for moulding and extrusion; classification and designation) | 77 | chevron_right |
| DIN 1681 DIN 1681 (Cast steels for general engineering purposes; technical delivery conditions) | 26 | chevron_right |
| DIN 1691 DIN 1691 (Flake graphite cast iron (grey cast iron); properties) | 38 | chevron_right |
| DIN 1692 DIN 1692 (Malleable cast iron; Concepts, properties) | 18 | chevron_right |
| DIN 1693-1 DIN 1693-1 (Cast Iron with Nodular Graphite; Unalloyed and Low Alloy Grades) | 14 | chevron_right |
| DIN 1693-2 DIN 1693-2 (Cast Iron with Nodular Graphite; Unalloyed and Low Alloy Grades; Properties in Cast-on Test Piece) | 10 | chevron_right |
| DIN 1694 DIN 1694 (Austenitic cast iron) | 46 | chevron_right |
| DIN 1695 DIN 1695 (Abrasion resisting alloy cast iron) | 18 | chevron_right |
| DIN 1701 DIN 1701 (Refined nickel) | 13 | chevron_right |
| DIN 1702 DIN 1702 (Nickel Anodes) | 8 | chevron_right |
| DIN 1704 DIN 1704 (Tin) | 10 | chevron_right |
| DIN 1705 DIN 1705 (Copper-tin and copper-tin-zinc casting alloys (Cast tin bronze and gunmetal); Castings) | 34 | chevron_right |
| DIN 1706 DIN 1706 (Zinc) | 12 | chevron_right |
| DIN 1707 DIN 1707 (Soft solders) | 100 | chevron_right |
| DIN 1708 DIN 1708 (Copper; Cathodes and Refinery Shapes) | 16 | chevron_right |
| DIN 1709 DIN 1709 (Copper-zinc alloy castings (brass and special brass castings)) | 40 | chevron_right |
| DIN 17100 DIN 17100 (Hot rolled products in non-alloy steels for general structural applications) | 103 | chevron_right |
| DIN 17102 DIN 17102 (Weldable normalized fine grain structural steels; technical delivery conditions for plate, strip, wide flats, sections and bars) | 64 | chevron_right |
| DIN 17103 DIN 17103 (Weldable fine grain structural steel forgings; technical delivery conditions) | 30 | chevron_right |
| DIN 17111 DIN 17111 (Low Carbon Unalloyed Steels for Bolts, Nuts and Rivets; Technical Conditions of Delivery) | 22 | chevron_right |
| DIN 17115 DIN 17115 (Steels for welded round link chains; technical delivery conditions) | 46 | chevron_right |
| DIN 17119 DIN 17119 (Welded cold formed square and rectangular steel tubes (hollow sections) for structural steelwork; technical delivery conditions) | 18 | chevron_right |
| DIN 17120 DIN 17120 (Welded circular steel tubes for structural steelwork; technical delivery conditions) | 12 | chevron_right |
| DIN 1712-1 DIN 1712-1 (Aluminium; Ingots) | 12 | chevron_right |
| DIN 17121 DIN 17121 (Seamless circular steel tubes for structural steelwork; technical delivery conditions) | 10 | chevron_right |
| DIN 1712-3 DIN 1712-3 (Aluminium; Half-finished Products) | 14 | chevron_right |
| DIN 17123 DIN 17123 (Welded circular fine grain steel tubes for structural steelwork; technical delivery conditions) | 30 | chevron_right |
| DIN 17125 DIN 17125 (Square and rectangular fine grain steel tubes (hollow sections) for structural steelwork; technical delivery conditions) | 30 | chevron_right |
| DIN 17135 DIN 17135 (Non-aging Steels; Quality Specifications) | 7 | chevron_right |
| DIN 1714 DIN 1714 (Copper-aluminium casting alloys (Cast aluminium bronze); Castings) | 30 | chevron_right |
| DIN 17140 DIN 17140 (Wire rod produced from basic steel and unalloyed quality and special steels; technical terms of delivery) | 32 | chevron_right |
| DIN 17140-1 DIN 17140-1 (Wire rod for cold drawing; technical delivery conditions for basic steel and unalloyed quality steels) | 58 | chevron_right |
| DIN 17145 DIN 17145 (Round Wire Rod for Welding Filler Metals; Technical Conditions of Delivery) | 104 | chevron_right |
| DIN 1715-1 DIN 1715-1 (Thermostat metals; Technical delivery conditions) | 14 | chevron_right |
| DIN 17155 DIN 17155 (Creep resistant steel plate and strip; technical delivery conditions) | 29 | chevron_right |
| DIN 17155-1 DIN 17155-1 (Steel plates and strips for pressure purposes; part 1: general requirements) | 10 | chevron_right |
| DIN 17155-2 DIN 17155-2 (Steel plates and strips for pressure purposes; part 2: unalloyed and alloyed steels with specified elevated temperature properties) | 19 | chevron_right |
| DIN 1716 DIN 1716 (Copper-lead-tin casting alloys (Cast tin-lead bronze); Castings) | 18 | chevron_right |
| DIN 17162-1 DIN 17162-1 (Flat Steel Products; Hot-dip Zinc Coated Strip and Sheet of Mild Unalloyed Steels; Technical Conditions of Delivery) | 15 | chevron_right |
| DIN 17162-2 DIN 17162-2 (Flat products of steel; hot-dip zinc coated strip and sheet; technical delivery conditions; structural steels) | 10 | chevron_right |
| DIN 17172 DIN 17172 (Steel Pipes for Long-distance Pipelines for Combustible Liquids and Gases; Technical Conditions of Delivery) | 28 | chevron_right |
| DIN 17173 DIN 17173 (Seamless steel tubes for low temperatures; technical delivery conditions) | 14 | chevron_right |
| DIN 17174 DIN 17174 (Welded steel tubes for low temperatures; technical delivery conditions) | 12 | chevron_right |
| DIN 17175 DIN 17175 (Seamless Tubes of Heat-resistant Steels - Technical Conditions of Delivery) | 19 | chevron_right |
| DIN 17175-1 DIN 17175-1 (Seamless steel tubes for elevated temperatures; Technical delivery conditions) | 14 | chevron_right |
| DIN 17175-2 DIN 17175-2 (Seamless tubes of creep resistant steels) | 10 | chevron_right |
| DIN 17176 DIN 17176 (Seamless circular steel tubes for hydrogen service at elevated temperatures and pressures; technical delivery conditions) | 18 | chevron_right |
| DIN 17177 DIN 17177 (Electric Pressure-welded Steel Tubes for Elevated Temperatures - Technical Conditions of Delivery) | 7 | chevron_right |
| DIN 17178 DIN 17178 (Welded circular fine grain steel tubes subject to special requirements - Technical delivery conditions) | 40 | chevron_right |
| DIN 17179 DIN 17179 (Seamless circular tubes of fine grain steels for special requirements; technical delivery conditions) | 40 | chevron_right |
| DIN 17182 DIN 17182 (Steel castings with improved weldability and toughness for general use) | 10 | chevron_right |
| DIN 1719 DIN 1719 (Lead; composition) | 14 | chevron_right |
| DIN 17200 DIN 17200 (Quenched and tempered steels; technical delivery conditions) | 90 | chevron_right |
| DIN 17204 DIN 17204 (Seamless circular tubes of steels for quenching and tempering; technical delivery conditions) | 62 | chevron_right |
| DIN 17205 DIN 17205 (Quenched and tempered steel castings for general applications; technical delivery conditions) | 20 | chevron_right |
| DIN 17210 DIN 17210 (Case hardening steels; technical delivery conditions) | 51 | chevron_right |
| DIN 17211 DIN 17211 (Nitriding steels - Technical delivery conditions) | 16 | chevron_right |
| DIN 17212 DIN 17212 (Flame and Induction Hardening Steels; Quality Specifications) | 18 | chevron_right |
| DIN 17221 DIN 17221 (Hot rolled steels for springs suitable for quenching and tempering - Technical delivery conditions) | 30 | chevron_right |
| DIN 17222 DIN 17222 (Cold Rolled Steel Strips for Springs; Technical Conditions of Delivery) | 40 | chevron_right |
| DIN 17223-1 DIN 17223-1 (Round steel wire for springs; patented cold drawn, carbon steel wire for springs; technical delivery conditions) | 8 | chevron_right |
| DIN 17223-2 DIN 17223-2 (Round steel wire for springs; oil quenched and tempered carbon and alloy steel wire; technical delivery conditions) | 8 | chevron_right |
| DIN 17224 DIN 17224 (Stainless steel wire and strip for springs; technical delivery conditions) | 8 | chevron_right |
| DIN 17225 DIN 17225 (High-temperature Steels for Springs; Quality Properties) | 12 | chevron_right |
| DIN 17230 DIN 17230 (Ball and Roller Bearing Steels; Technical Conditions of Delivery) | 55 | chevron_right |
| DIN 17240 DIN 17240 (Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications) | 20 | chevron_right |
| DIN 17243 DIN 17243 (Forgings and hot rolled or forged bars of weldable steels for elevated temperatures; technical delivery conditions) | 16 | chevron_right |
| DIN 17245 DIN 17245 (Ferritic steel castings with elevated temperature properties; technical delivery conditions) | 14 | chevron_right |
| DIN 17245-1 DIN 17245-1 (Heat resisting steel castings; Technical delivery conditions) | 10 | chevron_right |
| DIN 17245-2 DIN 17245-2 (Heat resisting steel castings; Quality specifications) | 16 | chevron_right |
| DIN 1725-1 DIN 1725-1 (Aluminium alloys; Wrought alloys) | 96 | chevron_right |
| DIN 1725-2 DIN 1725-2 (Aluminium alloys, casting alloys; sand casting, gravity die casting, pressure die casting, investment casting) | 134 | chevron_right |
| DIN 1725-3 DIN 1725-3 (Aluminium Alloys; Master Alloys) | 26 | chevron_right |
| DIN 17280 DIN 17280 (Steels with low temperature toughness; technical delivery conditions for plate, sheet, strip, wide flats, sections, bars and forgings) | 16 | chevron_right |
| DIN 1729-1 DIN 1729-1 (Wrought magnesium alloys) | 10 | chevron_right |
| DIN 1729-2 DIN 1729-2 (Magnesium Alloys; Casting Alloys; Sand Castings, Gravitiy Die Castings, Pressure Die Castings) | 44 | chevron_right |
| DIN 1732-1 DIN 1732-1 (Filler metals for welding aluminium and aluminium alloys) | 18 | chevron_right |
| DIN 1733-1 DIN 1733-1 (Filler metals for welding copper and copper alloys) | 50 | chevron_right |
| DIN 17350 DIN 17350 (Tool Steels; Technical Conditions of Delivery) | 100 | chevron_right |
| DIN 1736-1 DIN 1736-1 (Welding filler metals for nickel and nickel alloys) | 77 | chevron_right |
| DIN 1736-2 DIN 1736-2 (Welding filler metals for nickel and nickel alloys; sample, test pieces, mechanical properties) | 60 | chevron_right |
| DIN 1737-1 DIN 1737-1 (Filler metals for welding titanium and titanium-palladium alloys) | 8 | chevron_right |
| DIN 17405 DIN 17405 (Soft Magnetic Materials for Direct Current Relays; Technical Conditions of Delivery) | 31 | chevron_right |
| DIN 1741 DIN 1741 (Lead alloys for pressure die castings) | 8 | chevron_right |
| DIN 17410 DIN 17410 (Materials for Permanent Magnets; Technical Conditions of Delivery) | 31 | chevron_right |
| DIN 1742 DIN 1742 (Tin Alloys for Pressure; Die Castings) | 5 | chevron_right |
| DIN 1743-1 DIN 1743-1 (High Purity Zinc Casting Alloys; Ingot Metals) | 8 | chevron_right |
| DIN 1743-2 DIN 1743-2 (High Purity Zinc Casting Alloys; Pressure-, Sand- and Gravity Die Castings) | 12 | chevron_right |
| DIN 17440 DIN 17440 (Stainless steels - Technical delivery conditions for drawn wire) | 76 | chevron_right |
| DIN 17441 DIN 17441 (Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes) | 55 | chevron_right |
| DIN 17442 DIN 17442 (Rolled, Wrought or Cast Stainless Steel Products for Medical Instruments) | 8 | chevron_right |
| DIN 17443 DIN 17443 (Wrought stainless steels for surgical implants; technical delivery conditions) | 8 | chevron_right |
| DIN 17445 DIN 17445 (Corrosion resistant steel castings) | 60 | chevron_right |
| DIN 1745-1 DIN 1745-1 (Wrought aluminium and aluminium alloy plate, sheet and strip greater than 0,35 mm in thickness; Properties) | 64 | chevron_right |
| DIN 17455 DIN 17455 (Welded circular tubes of stainless steels for general requirements; technical delivery conditions) | 34 | chevron_right |
| DIN 17456 DIN 17456 (Seamless circular stainless steel tubes with general quality requirements - Technical delivery conditions) | 39 | chevron_right |
| DIN 17457 DIN 17457 (Welded circular austenitic stainless steel tubes subject to special requirements; technical delivery conditions) | 24 | chevron_right |
| DIN 17458 DIN 17458 (Seamless circular austenitic stainless steel tubes subject to special requirements; technical delivery conditions) | 26 | chevron_right |
| DIN 17459 DIN 17459 (Seamless circular high-temperature austenitic steel tubes; technical delivery conditions) | 22 | chevron_right |
| DIN 17460 DIN 17460 (High temperature austenitic steel plate and sheet, cold and hot rolled strip, bars and forgings - Technical delivery conditions) | 22 | chevron_right |
| DIN 1746-1 DIN 1746-1 (Wrought aluminium and aluminium alloy tubes; properties) | 50 | chevron_right |
| DIN 17465 DIN 17465 (Heat resisting steel castings) | 38 | chevron_right |
| DIN 17470 DIN 17470 (Heating conductor alloys; technical delivery conditions for round and flat wire) | 17 | chevron_right |
| DIN 17471 DIN 17471 (Resistance alloys - Properties) | 44 | chevron_right |
| DIN 1747-1 DIN 1747-1 (Wrought aluminium and aluminium alloy rod and bar; Properties) | 42 | chevron_right |
| DIN 17480 DIN 17480 (Valve materials; technical delivery conditions) | 18 | chevron_right |
| DIN 1748-1 DIN 1748-1 (Wrought aluminium and aluminium extruded sections; Properties) | 54 | chevron_right |
| DIN 1749-1 DIN 1749-1 (Drop Forgings of Aluminium and Wrought Aluminium Alloys; Strength Properties) | 30 | chevron_right |
| DIN 17606-1 DIN 17606-1 (Open Die Forgings of Wrought Aluminium Alloys - Strength Properties) | 18 | chevron_right |
| DIN 17640-1 DIN 17640-1 (General purpose lead alloys) | 22 | chevron_right |
| DIN 17641 DIN 17641 (Lead-antimony Alloys (Antimonial Lead)) | 16 | chevron_right |
| DIN 17655 DIN 17655 (Unalloyed and low alloy, copper materials for casting; Castings) | 15 | chevron_right |
| DIN 17656 DIN 17656 (Copper Casting Alloys; Ingot Metals, Composition) | 56 | chevron_right |
| DIN 17657 DIN 17657 (Copper Master Alloys; Composition) | 30 | chevron_right |
| DIN 17658 DIN 17658 (Copper-nickel Casting Alloys; Castings) | 4 | chevron_right |
| DIN 17660 DIN 17660 (Wrought copper alloys; copper-zinc alloys (brass); (special brass); chemical composition) | 92 | chevron_right |
| DIN 17662 DIN 17662 (Wrought copper alloys; copper-tin alloys; (tin bronze); composition) | 12 | chevron_right |
| DIN 17663 DIN 17663 (Wrought copper alloys; copper-nickel-zinc alloys; (nickel silver); composition) | 24 | chevron_right |
| DIN 17664 DIN 17664 (Wrought copper alloys; copper-nickel alloys; composition) | 19 | chevron_right |
| DIN 17665 DIN 17665 (Wrought copper alloys; copper-aluminium alloys; (aluminium bronze); composition) | 29 | chevron_right |
| DIN 17666 DIN 17666 (Low alloy wrought copper alloys - Composition) | 60 | chevron_right |
| DIN 17670-1 DIN 17670-1 (Wrought copper and copper alloys strip, sheet an plate; properties) | 157 | chevron_right |
| DIN 17671-1 DIN 17671-1 (Wrought copper and copper alloy tubes. Properties.) | 158 | chevron_right |
| DIN 17672-1 DIN 17672-1 (Wrought copper and copper alloy rod and bar; properties) | 147 | chevron_right |
| DIN 17673-1 DIN 17673-1 (Wrought copper and copper alloy drop forgings; properties) | 82 | chevron_right |
| DIN 17674-1 DIN 17674-1 (Wrought copper and copper alloy extruded sections; properties) | 43 | chevron_right |
| DIN 17677-1 DIN 17677-1 (Wrought copper and copper alloy wire) | 52 | chevron_right |
| DIN 17678-1 DIN 17678-1 (Wrought copper and copper alloy hand forgings; properties) | 45 | chevron_right |
| DIN 17679 DIN 17679 (Tubes of copper and wrought copper alloys with rolled fins for heat exchangers) | 12 | chevron_right |
| DIN 17682 DIN 17682 (Round Spring Wires Made of Wrought Copper Alloys; Strength Properties; Technical Conditions of Delivery) | 23 | chevron_right |
| DIN 17730 DIN 17730 (Nickel and nickel-copper alloys; castings) | 12 | chevron_right |
| DIN 17740 DIN 17740 (Wrought nickel - Chemical composition) | 19 | chevron_right |
| DIN 17741 DIN 17741 (Wrought nickel alloys, low alloyed - Chemical composition) | 14 | chevron_right |
| DIN 17742 DIN 17742 (Wrought nickel alloys with chromium - Chemical composition) | 32 | chevron_right |
| DIN 17743 DIN 17743 (Wrought nickel alloys with copper - Chemical composition) | 9 | chevron_right |
| DIN 17744 DIN 17744 (Wrought nickel alloys with molybdenum and chromium - Chemical composition) | 50 | chevron_right |
| DIN 17745 DIN 17745 (Wrought alloys of nickel and iron - Chemical composition) | 53 | chevron_right |
| DIN 17750 DIN 17750 (Strips and sheets of wrought nickel and nickel alloys - Properties) | 85 | chevron_right |
| DIN 17751 DIN 17751 (Tubes of wrought nickel and nickel alloys - Properties) | 58 | chevron_right |
| DIN 17752 DIN 17752 (Rods and bars of nickel and wrought nickel alloys - Properties) | 72 | chevron_right |
| DIN 17753 DIN 17753 (Wires of wrought nickel and nickel alloys - Properties) | 66 | chevron_right |
| DIN 17754 DIN 17754 (Forgings and drop forgings of wrought nickel and nickel alloys; properties) | 24 | chevron_right |
| DIN 17770 DIN 17770 (Zinc alloy sheet and strip for use in building construction; technical delivery conditions) | 2 | chevron_right |
| DIN 1780 DIN 1780 (Wrought copper alloy strips for springs; technical conditions of delivery) | 80 | chevron_right |
| DIN 17810 DIN 17810 (Tin alloy for table plate (pewter); chemical composition) | 6 | chevron_right |
| DIN 1785 DIN 1785 (Wrought copper and copper alloy tubes for condensers and heat exchangers) | 18 | chevron_right |
| DIN 17850 DIN 17850 (Titanium - Chemical composition) | 12 | chevron_right |
| DIN 17851 DIN 17851 (Titanium alloys - Chemical composition) | 24 | chevron_right |
| DIN 17860 DIN 17860 (Strips and sheets of titanium and titanium alloys - Technical delivery conditions) | 26 | chevron_right |
| DIN 17861 DIN 17861 (Seamless circular titanium and titanium alloy tubes; technical delivery conditions) | 14 | chevron_right |
| DIN 17862 DIN 17862 (Titanium and titanium alloy bars - Technical specification) | 30 | chevron_right |
| DIN 17863 DIN 17863 (Wire of Titanium) | 8 | chevron_right |
| DIN 17864 DIN 17864 (Titanium and titanium wrought alloys forgings (open-die forgings and drop forgings) - Technical specification) | 30 | chevron_right |
| DIN 17865 DIN 17865 (Titanium and titanium alloy investment castings and rammed graphite castings; technical delivery conditions) | 18 | chevron_right |
| DIN 17866 DIN 17866 (Welded circular titanium and titanium alloy tubes; technical delivery conditions) | 8 | chevron_right |
| DIN 17869 DIN 17869 (Material properties of titanium and titanium alloys; additional data) | 30 | chevron_right |
| DIN 1787 DIN 1787 (Copper - Half-finished Products) | 13 | chevron_right |
| DIN 1788 DIN 1788 (Wrought aluminium and aluminium alloy sheet and strip with thicknesses between 0,021 and 0,350 mm; Properties) | 22 | chevron_right |
| DIN 1790-1 DIN 1790-1 (Wrought aluminium and aluminium alloy wire; Properties) | 46 | chevron_right |
| DIN 17933-60 DIN 17933-60 (Copper and copper alloys - Part 60: Copper plate, sheet and strip for electrical purposes (Proposal for a European Standard)) | 16 | chevron_right |
| DIN 17933-61 DIN 17933-61 (Copper and copper alloys - Part 61: Seamless copper tubes for electrical purposes (Proposal for a European Standard)) | 16 | chevron_right |
| DIN 17933-62 DIN 17933-62 (Copper and copper alloys - Part 62: Copper rod, bar and wire for general electrical purposes (Proposal for a European Standard)) | 28 | chevron_right |
| DIN 17933-63 DIN 17933-63 (Copper and copper alloys - Part 63: Drawn, round copper wire for the manufacture of electrical conductors (Proposal for a European Standard)) | 10 | chevron_right |
| DIN 17933-65 DIN 17933-65 (Copper and copper alloys - Part 65: Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications (Proposal for a European Standard)) | 4 | chevron_right |
| DIN 17933-66 DIN 17933-66 (Copper and copper alloys - Part 66: Copper profiles and profiled wire for electrical purposes (Proposal for a European Standard)) | 24 | chevron_right |
| DIN 21544 DIN 21544 (Steel for mine support sections; technical delivery conditions) | 6 | chevron_right |
| DIN 2391-2 DIN 2391-2 (Seamless precision steel tubes - Part 2: Technical delivery conditions) | 10 | chevron_right |
| DIN 2393-2 DIN 2393-2 (Welded precision steel tubes - Part 2: Technical delivery conditions) | 22 | chevron_right |
| DIN 2394-2 DIN 2394-2 (As-welded and sized precision steel tubes - Part 2: Technical delivery conditions) | 22 | chevron_right |
| DIN 2395-3 DIN 2395-3 (Rectangular and square electric-welded precision steel tubes; Dimensions and technical conditions of delivery for tubes to be used in motor vehicle construction) | 10 | chevron_right |
| DIN 2528 DIN 2528 (Steel flanges; technical delivery conditions) | 6 | chevron_right |
| DIN 30910-3 DIN 30910-3 (Sintered metal materials - Sintered-material specifications - Part 3: Materials for bearings and structural parts with bearing properties) | 17 | chevron_right |
| DIN 30910-4 DIN 30910-4 (Sintered metal materials - Sintered-material specifications - Part 4: Materials for structural parts) | 34 | chevron_right |
| DIN 30910-6 DIN 30910-6 (Sintered metal materials; Werkstoff-Leistungsblätter (WLB) sint-material specifications; part 6: hot-forged sintered steels for structural parts) | 3 | chevron_right |
| DIN 40500-1 DIN 40500-1 (Copper for electrical purposes - Sheet and strip, technical terms of delivery) | 10 | chevron_right |
| DIN 40500-3 DIN 40500-3 (Copper for electrical purposes; sections, rods, bars, technical terms of delivery) | 8 | chevron_right |
| DIN 40500-4 DIN 40500-4 (Copper for electrical purposes - Wires of copper and silveralloyed copper - Terms of delivery) | 14 | chevron_right |
| DIN 40500-5 DIN 40500-5 (Copper for electrical purposes - Tinned wire - Technical delivery conditions) | 6 | chevron_right |
| DIN 40501-1 DIN 40501-1 (Aluminium for electrical purposes - E-Al plate, sheet and strip - Technical delivery conditions) | 2 | chevron_right |
| DIN 40501-2 DIN 40501-2 (Aluminium for use in electrical engineering - Part 2: Tubes, rods, bars and sections - Technical delivery conditions) | 2 | chevron_right |
| DIN 40501-3 DIN 40501-3 (Aluminium for electrical purposes; E-Al and E-AlMgSi0, 5 bars and sections; technical delivery conditions) | 4 | chevron_right |
| DIN 41301 DIN 41301 (Electro Sheets; Magnetic Materials for Transformers) | 22 | chevron_right |
| DIN 46400-1 DIN 46400-1 (Steel flat products with special magnetic properties; cold rolled, non-oriented, finally annealed magnetic sheet and strip; technical delivery conditions) | 45 | chevron_right |
| DIN 46400-2 DIN 46400-2 (Steel flat products with special magnetic properties; magnetic sheet and strip of unalloyed steels, cold rolled, nonoriented, delivered in the semi-processed state; technical delivery conditions) | 12 | chevron_right |
| DIN 46400-3 DIN 46400-3 (Steel flat products with special magnetic properties; grain- oriented magnetic steel sheet and strip; technical delivery conditions) | 6 | chevron_right |
| DIN 488-1 DIN 488-1 (Reinforcing steels; grades, properties, marking) | 24 | chevron_right |
| DIN 536-1 DIN 536-1 (Craine rails; dimensions, sectional properties, steel grades for crane rails with foot flange, form A) | 11 | chevron_right |
| DIN 5512-1 DIN 5512-1 (Steels for use in rail vehicle construction Part 1: Hot-rolled, unalloyed structural steels and hot-rolled structural steels with improved atmospheric corrosion resistance) | 16 | chevron_right |
| DIN 5512-2 DIN 5512-2 (Materials for rail vehicles - Steels - Part 2: Unalloyed steels for cold rolled flat products less than 3 mm thickness; selected standard) | 8 | chevron_right |
| DIN 5512-3 DIN 5512-3 (Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard) | 18 | chevron_right |
| DIN 5513 DIN 5513 (Materials for rail vehicles; aluminium and aluminium alloys) | 14 | chevron_right |
| DIN 8513-1 DIN 8513-1 (Brazing and braze weld filler metals; Copper base brazing alloys) | 19 | chevron_right |
| DIN 8513-2 DIN 8513-2 (Brazing and braze weld filler metals; Silver-bearing brazing alloys with less than 20% by wt. Silver) | 12 | chevron_right |
| DIN 8513-4 DIN 8513-4 (Brazing and braze welding filler metals; Aluminium base brazing alloys) | 5 | chevron_right |
| DIN 8513-5 DIN 8513-5 (Brazing filler metals; Nickel base filler metals for high temperature brazing) | 18 | chevron_right |
| DIN 8529-1 DIN 8529-1 (Classification of covered electrodes for manual metal arc- welding of high strength steels) | 13 | chevron_right |
| DIN 8554-1 DIN 8554-1 (Unalloyed and low alloy filler rods for gas welding; designation, technical delivery conditions) | 7 | chevron_right |
| DIN 8556-1 DIN 8556-1 (Classification of covered electrodes for manual metal arc-welding of stainless and heat resisting steels) | 1 | chevron_right |
| DIN 8557-1 DIN 8557-1 (Filler metals and weld deposit for submerged arc welding of non-alloy and alloy steels; designation) | 12 | chevron_right |
| DIN 8559-1 DIN 8559-1 (Welding filler metals for gas-shielded arc welding; wire electrodes and deposits for gas metal arc welding of carbon steels, carbon-manganese steels and micro alloyed steels; classification, designation) | 5 | chevron_right |
| DIN 8573-1 DIN 8573-1 (Filler metals for welding unalloyed and low alloy cast iron materials; Designation; Technical delivery conditions) | 6 | chevron_right |
| DIN 8575-1 DIN 8575-1 (Classification of covered electrodes for manual metal arc welding of creep-resisting steels) | 28 | chevron_right |
| DIN 9715 DIN 9715 (Semi-finished products of wrought magnesium alloys properties) | 8 | chevron_right |
| DIN CEN/TS 13388 DIN CEN/TS 13388 (Copper and copper alloys - Compendium of compositions and products) | 802 | chevron_right |
| DIN EN 10001 DIN EN 10001 (Definition and classification of pig-irons) | 13 | chevron_right |
| DIN EN 10016-2 DIN EN 10016-2 (Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod) | 60 | chevron_right |
| DIN EN 10016-3 DIN EN 10016-3 (Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod) | 6 | chevron_right |
| DIN EN 10016-4 DIN EN 10016-4 (Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications) | 68 | chevron_right |
| DIN EN 10025 DIN EN 10025 (Hot rolled products of non-alloy structural steels; technical delivery conditions) | 60 | chevron_right |
| DIN EN 10025-2 DIN EN 10025-2 (Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels) | 58 | chevron_right |
| DIN EN 10025-3 DIN EN 10025-3 (Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels) | 16 | chevron_right |
| DIN EN 10025-4 DIN EN 10025-4 (Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels) | 20 | chevron_right |
| DIN EN 10025-5 DIN EN 10025-5 (Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance) | 38 | chevron_right |
| DIN EN 10025-6 DIN EN 10025-6 (Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition) | 41 | chevron_right |
| DIN EN 10028-2 DIN EN 10028-2 (Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties) | 34 | chevron_right |
| DIN EN 10028-3 DIN EN 10028-3 (Flat products made of steels for pressure purposes - Part 3: weldable fine grain steels, normalized) | 30 | chevron_right |
| DIN EN 10028-4 DIN EN 10028-4 (Flat products made of steels for pressure purposes - Part 4: nickel alloy steels with specified low temperature properties) | 15 | chevron_right |
| DIN EN 10028-5 DIN EN 10028-5 (Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled) | 18 | chevron_right |
| DIN EN 10028-6 DIN EN 10028-6 (Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered) | 32 | chevron_right |
| DIN EN 10028-7 DIN EN 10028-7 (Flat products made of steels for pressure purposes - Part 7: Stainless steels) | 128 | chevron_right |
| DIN EN 10083-1 DIN EN 10083-1 (Quenched and tempered steels - Part 1: Technical delivery conditions for special steels (includes amendment A1:1996)) | 100 | chevron_right |
| DIN EN 10083-2 DIN EN 10083-2 (Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels) | 57 | chevron_right |
| DIN EN 10083-3 DIN EN 10083-3 (Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels) | 56 | chevron_right |
| DIN EN 10084 DIN EN 10084 (Case hardening steels - Technical delivery conditions) | 72 | chevron_right |
| DIN EN 10085 DIN EN 10085 (Nitriding steels - Technical delivery conditions) | 18 | chevron_right |
| DIN EN 10087 DIN EN 10087 (Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods) | 34 | chevron_right |
| DIN EN 10088-1 DIN EN 10088-1 (Stainless steels - Part 1: List of stainless steels) | 433 | chevron_right |
| DIN EN 10088-2 DIN EN 10088-2 (Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes) | 215 | chevron_right |
| DIN EN 10088-3 DIN EN 10088-3 (Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes) | 227 | chevron_right |
| DIN EN 10088-4 DIN EN 10088-4 (Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes) | 86 | chevron_right |
| DIN EN 10088-5 DIN EN 10088-5 (Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes) | 84 | chevron_right |
| DIN EN 10089 DIN EN 10089 (Hot-rolled steels for quenched and tempered springs - Technical delivery conditions) | 38 | chevron_right |
| DIN EN 10090 DIN EN 10090 (Valve steels and alloys for internal combustion engines) | 20 | chevron_right |
| DIN EN 10095 DIN EN 10095 (Heat resisting steels and nickel alloys) | 53 | chevron_right |
| DIN EN 10106 DIN EN 10106 (Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state) | 70 | chevron_right |
| DIN EN 10107 DIN EN 10107 (Grain-oriented electrical steel sheet and strip delivered in the fully processed state) | 98 | chevron_right |
| DIN EN 10111 DIN EN 10111 (Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions) | 8 | chevron_right |
| DIN EN 10113-2 DIN EN 10113-2 (Hot-rolled products in weldable fine grain structural steels - Part 2: delivery conditions for normalized rolled steels) | 16 | chevron_right |
| DIN EN 10113-3 DIN EN 10113-3 (Hot-rolled products in weldable fine grain structural steels - Part 3: delivery conditions for thermomechanically rolled steels) | 16 | chevron_right |
| DIN EN 10120 DIN EN 10120 (Steel sheet and strip for welded gas cylinders) | 10 | chevron_right |
| DIN EN 10126 DIN EN 10126 (Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state) | 12 | chevron_right |
| DIN EN 10130 DIN EN 10130 (Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions) | 17 | chevron_right |
| DIN EN 10132 DIN EN 10132 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions) | 74 | chevron_right |
| DIN EN 10132-2 DIN EN 10132-2 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels) | 8 | chevron_right |
| DIN EN 10132-3 DIN EN 10132-3 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering) | 24 | chevron_right |
| DIN EN 10132-4 DIN EN 10132-4 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4: Spring steels and other applications) | 30 | chevron_right |
| DIN EN 10137-2 DIN EN 10137-2 (Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels) | 40 | chevron_right |
| DIN EN 10137-3 DIN EN 10137-3 (Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels) | 16 | chevron_right |
| DIN EN 10139 DIN EN 10139 (Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions) | 12 | chevron_right |
| DIN EN 10142 DIN EN 10142 (Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions) | 32 | chevron_right |
| DIN EN 10147 DIN EN 10147 (Continuously hot-dip zinc coated structural steels strip and sheet - Technical delivery conditions) | 46 | chevron_right |
| DIN EN 10149-2 DIN EN 10149-2 (Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels) | 22 | chevron_right |
| DIN EN 10149-3 DIN EN 10149-3 (Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels) | 8 | chevron_right |
| DIN EN 10151 DIN EN 10151 (Stainless steel strip for springs - Technical delivery conditions) | 20 | chevron_right |
| DIN EN 10152 DIN EN 10152 (Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions) | 16 | chevron_right |
| DIN EN 10154 DIN EN 10154 (Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions) | 20 | chevron_right |
| DIN EN 10155 DIN EN 10155 (Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions) | 18 | chevron_right |
| DIN EN 10165 DIN EN 10165 (Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state) | 16 | chevron_right |
| DIN EN 10169-1 DIN EN 10169-1 (Continuously organic coated (coil coated) steel flat products - Part 1: general information (definitions, materials, tolerances, test methods)) | 15 | chevron_right |
| DIN EN 10202 DIN EN 10202 (Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel) | 48 | chevron_right |
| DIN EN 10203 DIN EN 10203 (Cold reduced electrolytic tinplate) | 8 | chevron_right |
| DIN EN 10205 DIN EN 10205 (Cold reduced tinmill products - Blackplate) | 51 | chevron_right |
| DIN EN 10207 DIN EN 10207 (Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars) | 9 | chevron_right |
| DIN EN 10208-1 DIN EN 10208-1 (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A) | 10 | chevron_right |
| DIN EN 10208-2 DIN EN 10208-2 (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B) | 32 | chevron_right |
| DIN EN 10209 DIN EN 10209 (Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions) | 22 | chevron_right |
| DIN EN 10210-1 DIN EN 10210-1 (Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 28 | chevron_right |
| DIN EN 10210-3 DIN EN 10210-3 (Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels) | 96 | chevron_right |
| DIN EN 10213 DIN EN 10213 (Steel castings for pressure purposes) | 66 | chevron_right |
| DIN EN 10213-2 DIN EN 10213-2 (Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures) | 26 | chevron_right |
| DIN EN 10213-3 DIN EN 10213-3 (Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures) | 14 | chevron_right |
| DIN EN 10213-4 DIN EN 10213-4 (Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades) | 20 | chevron_right |
| DIN EN 10214 DIN EN 10214 (Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions) | 26 | chevron_right |
| DIN EN 10215 DIN EN 10215 (Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions) | 21 | chevron_right |
| DIN EN 10216-1 DIN EN 10216-1 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties) | 12 | chevron_right |
| DIN EN 10216-2 DIN EN 10216-2 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties) | 58 | chevron_right |
| DIN EN 10216-3 DIN EN 10216-3 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes) | 34 | chevron_right |
| DIN EN 10216-4 DIN EN 10216-4 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties) | 18 | chevron_right |
| DIN EN 10216-5 DIN EN 10216-5 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes) | 80 | chevron_right |
| DIN EN 10217-1 DIN EN 10217-1 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties) | 12 | chevron_right |
| DIN EN 10217-2 DIN EN 10217-2 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties) | 8 | chevron_right |
| DIN EN 10217-3 DIN EN 10217-3 (Welded steel tubes for pressure purposes - Technical delivery conditions -Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties) | 20 | chevron_right |
| DIN EN 10217-4 DIN EN 10217-4 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties) | 4 | chevron_right |
| DIN EN 10217-5 DIN EN 10217-5 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties) | 6 | chevron_right |
| DIN EN 10217-6 DIN EN 10217-6 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties) | 4 | chevron_right |
| DIN EN 10217-7 DIN EN 10217-7 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes) | 46 | chevron_right |
| DIN EN 10219-1 DIN EN 10219-1 (Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 40 | chevron_right |
| DIN EN 10219-3 DIN EN 10219-3 (Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels) | 88 | chevron_right |
| DIN EN 10222-2 DIN EN 10222-2 (Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties) | 34 | chevron_right |
| DIN EN 10222-3 DIN EN 10222-3 (Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties) | 10 | chevron_right |
| DIN EN 10222-4 DIN EN 10222-4 (Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength) | 26 | chevron_right |
| DIN EN 10222-5 DIN EN 10222-5 (Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels) | 60 | chevron_right |
| DIN EN 10224 DIN EN 10224 (Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions) | 6 | chevron_right |
| DIN EN 10225 DIN EN 10225 (Weldable structural steels for fixed offshore structures - Technical delivery conditions) | 96 | chevron_right |
| DIN EN 10225-1 DIN EN 10225-1 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates) | 22 | chevron_right |
| DIN EN 10225-2 DIN EN 10225-2 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 2: Sections) | 18 | chevron_right |
| DIN EN 10225-3 DIN EN 10225-3 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 3: Hot finished hollow sections) | 24 | chevron_right |
| DIN EN 10225-4 DIN EN 10225-4 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections) | 18 | chevron_right |
| DIN EN 10248-1 DIN EN 10248-1 (Hot-rolled steel sheet piles - Part 1: Technical delivery conditions) | 16 | chevron_right |
| DIN EN 10249-1 DIN EN 10249-1 (Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions) | 6 | chevron_right |
| DIN EN 10250-2 DIN EN 10250-2 (Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels) | 47 | chevron_right |
| DIN EN 10250-3 DIN EN 10250-3 (Open die steel forgings for general engineering purposes - Part 3: Alloy special steels) | 42 | chevron_right |
| DIN EN 10250-4 DIN EN 10250-4 (Open die steel forgings for general engineering purposes - Part 4: Stainless steels) | 70 | chevron_right |
| DIN EN 10253-1 DIN EN 10253-1 (Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements) | 2 | chevron_right |
| DIN EN 10253-2 DIN EN 10253-2 (Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements) | 64 | chevron_right |
| DIN EN 10253-3 DIN EN 10253-3 (Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements) | 50 | chevron_right |
| DIN EN 10253-4 DIN EN 10253-4 (Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements) | 50 | chevron_right |
| DIN EN 10255 DIN EN 10255 (Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions) | 2 | chevron_right |
| DIN EN 10263-2 DIN EN 10263-2 (Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working) | 18 | chevron_right |
| DIN EN 10263-3 DIN EN 10263-3 (Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels) | 50 | chevron_right |
| DIN EN 10263-4 DIN EN 10263-4 (Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering) | 72 | chevron_right |
| DIN EN 10263-5 DIN EN 10263-5 (Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels) | 38 | chevron_right |
| DIN EN 10264-4 DIN EN 10264-4 (Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire) | 10 | chevron_right |
| DIN EN 10265 DIN EN 10265 (Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation) | 32 | chevron_right |
| DIN EN 10267 DIN EN 10267 (Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures) | 20 | chevron_right |
| DIN EN 10268 DIN EN 10268 (Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions) | 47 | chevron_right |
| DIN EN 10269 DIN EN 10269 (Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties) | 88 | chevron_right |
| DIN EN 10270-1 DIN EN 10270-1 (Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire) | 5 | chevron_right |
| DIN EN 10270-2 DIN EN 10270-2 (Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire) | 12 | chevron_right |
| DIN EN 10270-3 DIN EN 10270-3 (Steel wire for mechanical springs - Part 3: Stainless spring steel wire) | 12 | chevron_right |
| DIN EN 10271 DIN EN 10271 (Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions) | 15 | chevron_right |
| DIN EN 10272 DIN EN 10272 (Stainless steel bars for pressure purposes) | 70 | chevron_right |
| DIN EN 10273 DIN EN 10273 (Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties) | 32 | chevron_right |
| DIN EN 10277 DIN EN 10277 (Bright steel products - Technical delivery conditions) | 169 | chevron_right |
| DIN EN 10277-2 DIN EN 10277-2 (Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes) | 29 | chevron_right |
| DIN EN 10277-3 DIN EN 10277-3 (Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels) | 34 | chevron_right |
| DIN EN 10277-4 DIN EN 10277-4 (Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels) | 20 | chevron_right |
| DIN EN 10277-5 DIN EN 10277-5 (Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering) | 34 | chevron_right |
| DIN EN 10283 DIN EN 10283 (Corrosion resistant steel castings) | 61 | chevron_right |
| DIN EN 10292 DIN EN 10292 (Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions) | 197 | chevron_right |
| DIN EN 10293 DIN EN 10293 (Steel castings for general engineering uses) | 66 | chevron_right |
| DIN EN 10294-1 DIN EN 10294-1 (Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels) | 10 | chevron_right |
| DIN EN 10294-2 DIN EN 10294-2 (Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties) | 20 | chevron_right |
| DIN EN 10295 DIN EN 10295 (Heat resistant steel castings) | 58 | chevron_right |
| DIN EN 10296-1 DIN EN 10296-1 (Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes) | 34 | chevron_right |
| DIN EN 10296-2 DIN EN 10296-2 (Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel) | 66 | chevron_right |
| DIN EN 10297-1 DIN EN 10297-1 (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes) | 62 | chevron_right |
| DIN EN 10297-2 DIN EN 10297-2 (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel) | 84 | chevron_right |
| DIN EN 10302 DIN EN 10302 (Creep resisting steels, nickel and cobalt alloys) | 70 | chevron_right |
| DIN EN 10303 DIN EN 10303 (Thin magnetic steel sheet and strip for use at medium frequencies) | 18 | chevron_right |
| DIN EN 10304 DIN EN 10304 (Magnetic materials (iron and steel) for use in relays) | 5 | chevron_right |
| DIN EN 10305-1 DIN EN 10305-1 (Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes) | 30 | chevron_right |
| DIN EN 10305-2 DIN EN 10305-2 (Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes) | 10 | chevron_right |
| DIN EN 10305-3 DIN EN 10305-3 (Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes) | 50 | chevron_right |
| DIN EN 10305-4 DIN EN 10305-4 (Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems) | 6 | chevron_right |
| DIN EN 10305-5 DIN EN 10305-5 (Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes) | 32 | chevron_right |
| DIN EN 10305-6 DIN EN 10305-6 (Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems) | 10 | chevron_right |
| DIN EN 10323 DIN EN 10323 (Steel wire and wire products - Bead wire) | 5 | chevron_right |
| DIN EN 10324 DIN EN 10324 (Steel wire and wire products - Hose reinforcement wire) | 3 | chevron_right |
| DIN EN 10326 DIN EN 10326 (Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions) | 56 | chevron_right |
| DIN EN 10327 DIN EN 10327 (Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions) | 84 | chevron_right |
| DIN EN 10331 DIN EN 10331 (Magnetic materials - Specification for sintered soft magnetic materials) | 14 | chevron_right |
| DIN EN 10336 DIN EN 10336 (Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming) | 50 | chevron_right |
| DIN EN 10338 DIN EN 10338 (Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions) | 73 | chevron_right |
| DIN EN 10340 DIN EN 10340 (Steel castings for structural uses) | 24 | chevron_right |
| DIN EN 10341 DIN EN 10341 (Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state) | 28 | chevron_right |
| DIN EN 10343 DIN EN 10343 (Steels for quenching and tempering for construction purposes - Technical delivery conditions) | 26 | chevron_right |
| DIN EN 10346 DIN EN 10346 (Continuously hot-dip coated steel flat products - Technical delivery conditions) | 485 | chevron_right |
| DIN EN 10349 DIN EN 10349 (Steel castings - Austenitic manganese steel castings) | 18 | chevron_right |
| DIN EN 10378 DIN EN 10378 (Welded stainless steel square and rectangular tubes for mechanical and structural engineering and decorative use - Technical delivery conditions) | 46 | chevron_right |
| DIN EN 1044 DIN EN 1044 (Brazing - Filler metals) | 184 | chevron_right |
| DIN EN 1057 DIN EN 1057 (Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications) | 2 | chevron_right |
| DIN EN 1094-2 DIN EN 1094-2 (Insulating refractory products - Part 2: Classification of shaped products (ISO 2245:1990 modified)) | 24 | chevron_right |
| DIN EN 1172 DIN EN 1172 (Copper and copper alloys - Sheet and strip for building purposes) | 12 | chevron_right |
| DIN EN 1179 DIN EN 1179 (Zinc an zinc alloys - Primary zinc) | 5 | chevron_right |
| DIN EN 12070 DIN EN 12070 (Welding consumables - Wire electrodes, wires and rods for arc welding of creep-resisting steels) | 63 | chevron_right |
| DIN EN 12071 DIN EN 12071 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels) | 8 | chevron_right |
| DIN EN 12072 DIN EN 12072 (Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels) | 39 | chevron_right |
| DIN EN 12163 DIN EN 12163 (Copper and copper alloys - Rod for general purposes) | 110 | chevron_right |
| DIN EN 12164 DIN EN 12164 (Copper and copper alloys - Rod for free machining purposes) | 90 | chevron_right |
| DIN EN 12165 DIN EN 12165 (Copper and copper alloys - Wrought and unwrought forging stock) | 126 | chevron_right |
| DIN EN 12166 DIN EN 12166 (Copper and copper alloys - Wire for general purposes) | 104 | chevron_right |
| DIN EN 12167 DIN EN 12167 (Copper and copper alloys - Profiles and bars for general purposes) | 142 | chevron_right |
| DIN EN 12168 DIN EN 12168 (Copper and copper alloys - Hollow rod for free machining purposes) | 64 | chevron_right |
| DIN EN 12369-1 DIN EN 12369-1 (Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards) | 11 | chevron_right |
| DIN EN 12369-3 DIN EN 12369-3 (Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels) | 3 | chevron_right |
| DIN EN 12392 DIN EN 12392 (Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment) | 94 | chevron_right |
| DIN EN 12420 DIN EN 12420 (Copper and copper alloys - Forgings) | 126 | chevron_right |
| DIN EN 12421 DIN EN 12421 (Magnesium and magnesium alloys - Unalloyed magnesium) | 23 | chevron_right |
| DIN EN 12438 DIN EN 12438 (Magnesium and magnesium alloys - Magnesium alloys for cast anodes) | 30 | chevron_right |
| DIN EN 12449 DIN EN 12449 (Copper and copper alloys - Seamless, round tubes for general purposes) | 94 | chevron_right |
| DIN EN 12450 DIN EN 12450 (Copper and copper alloys - Seamless, round copper capillary tubes) | 2 | chevron_right |
| DIN EN 12451 DIN EN 12451 (Copper and copper alloys - Seamless, round tubes for heat exchangers) | 16 | chevron_right |
| DIN EN 12452 DIN EN 12452 (Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers) | 10 | chevron_right |
| DIN EN 12475-1 DIN EN 12475-1 (Classification of dense shaped refractory products - Part 1: Alumina-silica products) | 13 | chevron_right |
| DIN EN 12475-2 DIN EN 12475-2 (Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon) | 31 | chevron_right |
| DIN EN 12475-3 DIN EN 12475-3 (Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 30% residual carbon) | 55 | chevron_right |
| DIN EN 12475-4 DIN EN 12475-4 (Classification of dense shaped refractory products - Part 4: Special products) | 80 | chevron_right |
| DIN EN 12476 DIN EN 12476 (Phosphate conversion coatings of metals - Method of specifying requirements) | 4 | chevron_right |
| DIN EN 12496 DIN EN 12496 (Galvanic anodes for cathodic protection in seawater and saline mud) | 10 | chevron_right |
| DIN EN 12513 DIN EN 12513 (Founding - Abrasion resistant cast irons) | 38 | chevron_right |
| DIN EN 12516-4 DIN EN 12516-4 (Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel) | 78 | chevron_right |
| DIN EN 12535 DIN EN 12535 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels) | 11 | chevron_right |
| DIN EN 12536 DIN EN 12536 (Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification) | 6 | chevron_right |
| DIN EN 12548 DIN EN 12548 (Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves) | 32 | chevron_right |
| DIN EN 12588 DIN EN 12588 (Lead and lead alloys - Rolled lead sheet for building purposes) | 1 | chevron_right |
| DIN EN 12659 DIN EN 12659 (Lead and lead alloys - Lead) | 8 | chevron_right |
| DIN EN 12735-1 DIN EN 12735-1 (Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems) | 4 | chevron_right |
| DIN EN 12735-2 DIN EN 12735-2 (Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment) | 2 | chevron_right |
| DIN EN 12765 DIN EN 12765 (Classification of thermosetting wood adhesive for non-structural applications) | 4 | chevron_right |
| DIN EN 12844 DIN EN 12844 (Zinc and zinc alloys - Castings - Specifications) | 16 | chevron_right |
| DIN EN 12861 DIN EN 12861 (Copper and copper alloys - Scrap) | 83 | chevron_right |
| DIN EN 12952-2 DIN EN 12952-2 (Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories) | 114 | chevron_right |
| DIN EN 12953-2 DIN EN 12953-2 (Shell boilers - Part 2: Materials for pressure parts of boilers and accessories) | 29 | chevron_right |
| DIN EN 1301-2 DIN EN 1301-2 (Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties) | 45 | chevron_right |
| DIN EN 13148 DIN EN 13148 (Copper and copper alloys - Hot-dip tinned strip) | 56 | chevron_right |
| DIN EN 13195 DIN EN 13195 (Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)) | 48 | chevron_right |
| DIN EN 13195-1 DIN EN 13195-1 (Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications) | 20 | chevron_right |
| DIN EN 13261 DIN EN 13261 (Railway applications - Wheelsets and bogies - Axles - Product requirements) | 3 | chevron_right |
| DIN EN 13262 DIN EN 13262 (Railway applications - Wheelsets and bogies - Wheels - Product requirements) | 5 | chevron_right |
| DIN EN 13283 DIN EN 13283 (Zinc and zinc alloys - Secondary zinc) | 3 | chevron_right |
| DIN EN 13347 DIN EN 13347 (Copper and copper alloys - Rod and wire for welding and braze welding) | 58 | chevron_right |
| DIN EN 13348 DIN EN 13348 (Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum) | 2 | chevron_right |
| DIN EN 13353 DIN EN 13353 (Solid wood panels (SWP) - Requirements) | 9 | chevron_right |
| DIN EN 13445-2 DIN EN 13445-2 (Unfired pressure vessels - Part 2: Materials) | 408 | chevron_right |
| DIN EN 13445-6 DIN EN 13445-6 (Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron) | 20 | chevron_right |
| DIN EN 13445-8 DIN EN 13445-8 (Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys) | 34 | chevron_right |
| DIN EN 13480-2 DIN EN 13480-2 (Metallic industrial piping - Part 2: Materials) | 406 | chevron_right |
| DIN EN 13599 DIN EN 13599 (Copper and copper alloys - Copper plate, sheet and strip for electrical purposes) | 16 | chevron_right |
| DIN EN 13600 DIN EN 13600 (Copper and copper alloys - Seamless copper tubes for electrical purposes) | 20 | chevron_right |
| DIN EN 13601 DIN EN 13601 (Copper and copper alloys - Copper rod, bar and wire for general electrical purposes) | 32 | chevron_right |
| DIN EN 13602 DIN EN 13602 (Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors) | 10 | chevron_right |
| DIN EN 13604 DIN EN 13604 (Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper) | 4 | chevron_right |
| DIN EN 13605 DIN EN 13605 (Copper and copper alloys - Copper profiles and profiled wire for electrical purposes) | 36 | chevron_right |
| DIN EN 13674-1 DIN EN 13674-1 (Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above) | 18 | chevron_right |
| DIN EN 13674-2 DIN EN 13674-2 (Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above) | 18 | chevron_right |
| DIN EN 13674-3 DIN EN 13674-3 (Railway applications - Track - Rail - Part 3: Check rails) | 6 | chevron_right |
| DIN EN 13674-4 DIN EN 13674-4 (Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m) | 15 | chevron_right |
| DIN EN 13835 DIN EN 13835 (Founding - Austenitic cast irons) | 36 | chevron_right |
| DIN EN 1386 DIN EN 1386 (Aluminium and aluminium alloys - Tread plate - Specifications) | 22 | chevron_right |
| DIN EN 1396 DIN EN 1396 (Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications) | 62 | chevron_right |
| DIN EN 13981-1 DIN EN 13981-1 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products) | 20 | chevron_right |
| DIN EN 13981-2 DIN EN 13981-2 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets) | 10 | chevron_right |
| DIN EN 13981-3 DIN EN 13981-3 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings) | 17 | chevron_right |
| DIN EN 13981-4 DIN EN 13981-4 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings) | 8 | chevron_right |
| DIN EN 14121 DIN EN 14121 (Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications) | 9 | chevron_right |
| DIN EN 14286 DIN EN 14286 (Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods) | 18 | chevron_right |
| DIN EN 14436 DIN EN 14436 (Copper and copper alloys - Electrolytically tinned strip) | 54 | chevron_right |
| DIN EN 14700 DIN EN 14700 (Welding consumables - Welding consumables for hard-facing) | 30 | chevron_right |
| DIN EN 1561 DIN EN 1561 (Founding - Grey cast irons) | 41 | chevron_right |
| DIN EN 1562 DIN EN 1562 (Founding - Malleable cast irons) | 42 | chevron_right |
| DIN EN 1563 DIN EN 1563 (Founding - Spheroidal graphite cast irons) | 93 | chevron_right |
| DIN EN 1564 DIN EN 1564 (Founding - Ausferritic spheroidal graphite cast irons) | 33 | chevron_right |
| DIN EN 15776 DIN EN 15776 (Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%) | 33 | chevron_right |
| DIN EN 1592-2 DIN EN 1592-2 (Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties) | 24 | chevron_right |
| DIN EN 1599 DIN EN 1599 (Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels) | 12 | chevron_right |
| DIN EN 1600 DIN EN 1600 (Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels) | 34 | chevron_right |
| DIN EN 16079 DIN EN 16079 (Founding - Compacted (vermicular) graphite cast irons) | 15 | chevron_right |
| DIN EN 16124 DIN EN 16124 (Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications) | 18 | chevron_right |
| DIN EN 16482 DIN EN 16482 (Founding - Continuous cast iron bars) | 62 | chevron_right |
| DIN EN 1652 DIN EN 1652 (Copper and copper alloys - Plate, sheet, strip and circles for general purposes) | 84 | chevron_right |
| DIN EN 1653 DIN EN 1653 (Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units) | 24 | chevron_right |
| DIN EN 1654 DIN EN 1654 (Copper and copper alloys - Strip for springs and connectors) | 40 | chevron_right |
| DIN EN 1668 DIN EN 1668 (Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels) | 8 | chevron_right |
| DIN EN 1676 DIN EN 1676 (Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications) | 101 | chevron_right |
| DIN EN 16914 DIN EN 16914 (Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions) | 2 | chevron_right |
| DIN EN 1706 DIN EN 1706 (Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties) | 103 | chevron_right |
| DIN EN 1715-2 DIN EN 1715-2 (Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications) | 18 | chevron_right |
| DIN EN 1715-3 DIN EN 1715-3 (Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)) | 49 | chevron_right |
| DIN EN 1715-4 DIN EN 1715-4 (Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications) | 20 | chevron_right |
| DIN EN 1753 DIN EN 1753 (Magnesium and magnesium alloys - Magnesium alloy ingots and castings) | 158 | chevron_right |
| DIN EN 1758 DIN EN 1758 (Copper and copper alloys - Strip for lead frames) | 6 | chevron_right |
| DIN EN 1774 DIN EN 1774 (Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid) | 8 | chevron_right |
| DIN EN 197-1 DIN EN 197-1 (Cement - Part 1: Composition, specifications and conformity criteria for common cements) | 162 | chevron_right |
| DIN EN 1976 DIN EN 1976 (Copper and copper alloys - Cast unwrought copper products) | 44 | chevron_right |
| DIN EN 1977 DIN EN 1977 (Copper and copper alloys - Copper drawing stock (wire rod)) | 36 | chevron_right |
| DIN EN 1978 DIN EN 1978 (Copper and copper alloys - Copper cathodes) | 4 | chevron_right |
| DIN EN 1981 DIN EN 1981 (Copper and copper alloys - Master alloys) | 78 | chevron_right |
| DIN EN 1982 DIN EN 1982 (Copper and copper alloys - Ingots and castings) | 206 | chevron_right |
| DIN EN 2030 DIN EN 2030 (Aerospace series-Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De ≤ 150 mm) | 2 | chevron_right |
| DIN EN 2031 DIN EN 2031 (Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars) | 2 | chevron_right |
| DIN EN 204 DIN EN 204 (Classification of thermoplastic wood adhesives for non-structural applications) | 4 | chevron_right |
| DIN EN 2072 DIN EN 2072 (Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2085 DIN EN 2085 (Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| DIN EN 2086 DIN EN 2086 (Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a ≤ 150 mm) | 1 | chevron_right |
| DIN EN 2087 DIN EN 2087 (Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheets and strips 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2088 DIN EN 2088 (Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2089 DIN EN 2089 (Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 20898-1 DIN EN 20898-1 (Mechanical properties of fasteners - Part 1: Bolts, screws and studs) | 10 | chevron_right |
| DIN EN 20898-2 DIN EN 20898-2 (Mechanical properties of fasteners - Part 2: Nuts with specified proof load values) | 8 | chevron_right |
| DIN EN 20898-6 DIN EN 20898-6 (Mechanical properties of fasteners - Part 6: Nuts with specified proof load values) | 7 | chevron_right |
| DIN EN 2090 DIN EN 2090 (Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2092 DIN EN 2092 (Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2093 DIN EN 2093 (Aerospace series - Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| DIN EN 2094 DIN EN 2094 (Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgings 3 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| DIN EN 2100 DIN EN 2100 (Aerospace series - Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D ≤ 200 mm) | 1 | chevron_right |
| DIN EN 2104 DIN EN 2104 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD) | 1 | chevron_right |
| DIN EN 2114 DIN EN 2114 (Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D ≤ 10 mm) | 1 | chevron_right |
| DIN EN 2115 DIN EN 2115 (Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D ≤ 10 mm No) | 1 | chevron_right |
| DIN EN 2116 DIN EN 2116 (Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D ≤ 10 mm No) | 1 | chevron_right |
| DIN EN 2117 DIN EN 2117 (Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D ≤ 10 mm) | 1 | chevron_right |
| DIN EN 2119 DIN EN 2119 (Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa) | 2 | chevron_right |
| DIN EN 2125 DIN EN 2125 (Aerospace series - Aluminium alloy Al-P16-T6151 - Plates - 6 mm < a ≤ 120 mm) | 1 | chevron_right |
| DIN EN 2126 DIN EN 2126 (Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| DIN EN 2127 DIN EN 2127 (Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D ≤ 100 mm) | 1 | chevron_right |
| DIN EN 2128 DIN EN 2128 (Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm ≤ a or D ≤ 75 mm) | 1 | chevron_right |
| DIN EN 2135 DIN EN 2135 (Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De ≤ 40 mm) | 1 | chevron_right |
| DIN EN 2137 DIN EN 2137 (Aerospace series - Steel FE-PL75 - 1 100 MPa ≤ Rm ≤ 1 250 MPa - Bars - De ≤ 100 mm) | 1 | chevron_right |
| DIN EN 2174 DIN EN 2174 (Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De ≤ 100 mm - Rm ≥ 850 MPa) | 2 | chevron_right |
| DIN EN 2205 DIN EN 2205 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| DIN EN 2206 DIN EN 2206 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa ≤ Rm ≤ 850 MPa - Bars - De ≤ 150 mm) | 2 | chevron_right |
| DIN EN 2209 DIN EN 2209 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheets, strips and plates - 0,5 mm ≤ a ≤ 20 mm) | 2 | chevron_right |
| DIN EN 2213 DIN EN 2213 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa) | 3 | chevron_right |
| DIN EN 2221 DIN EN 2221 (Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm ≤ a ≤ 55 mm) | 1 | chevron_right |
| DIN EN 2222 DIN EN 2222 (Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings) | 1 | chevron_right |
| DIN EN 2226 DIN EN 2226 (Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De ≤ 150 mm) | 2 | chevron_right |
| DIN EN 2252 DIN EN 2252 (Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa) | 3 | chevron_right |
| DIN EN 2256 DIN EN 2256 (Aerospace series - Aluminium alloy AL-P2618A - T852 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| DIN EN 2259 DIN EN 2259 (Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD) | 1 | chevron_right |
| DIN EN 2260 DIN EN 2260 (Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD) | 1 | chevron_right |
| DIN EN 2261 DIN EN 2261 (Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD) | 1 | chevron_right |
| DIN EN 2262 DIN EN 2262 (Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD) | 1 | chevron_right |
| DIN EN 2278 DIN EN 2278 (Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 150 mm) | 2 | chevron_right |
| DIN EN 2279 DIN EN 2279 (Aerospace series - Steel FE-PM37 - 900 MPa < Rm < 1 100 MPa - Forgings - De < 150 mm) | 1 | chevron_right |
| DIN EN 2280 DIN EN 2280 (Aerospace series - Steel FE-PM37 - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheet - a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2302 DIN EN 2302 (Aerospace series - Heat-resisting nickel base alloy NiCr20Co3Fe3 - Rm ≥ 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm) | 1 | chevron_right |
| DIN EN 2306 DIN EN 2306 (Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars) | 1 | chevron_right |
| DIN EN 2318 DIN EN 2318 (Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm) | 1 | chevron_right |
| DIN EN 2319 DIN EN 2319 (Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a < 75 mm) | 1 | chevron_right |
| DIN EN 2320 DIN EN 2320 (Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a ≤ 75 mm) | 1 | chevron_right |
| DIN EN 2321 DIN EN 2321 (Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a ≤ 150 m) | 1 | chevron_right |
| DIN EN 2326 DIN EN 2326 (Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm) | 1 | chevron_right |
| DIN EN 2381 DIN EN 2381 (Aerospace series - Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| DIN EN 2384 DIN EN 2384 (Aerospace series - Aluminium alloy AL-P2014A T6511 - Extruded bars and sections a or D ≤ 150 mm) | 1 | chevron_right |
| DIN EN 2385 DIN EN 2385 (Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm) | 1 | chevron_right |
| DIN EN 2387 DIN EN 2387 (Aerospace series - Aluminium alloy 2014A - T6 - Tubes for structures - 0,6 mm < a < 12,5 mm) | 1 | chevron_right |
| DIN EN 2390 DIN EN 2390 (Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0.6 mm ≤ a ≤ 12.5 mm) | 1 | chevron_right |
| DIN EN 2395 DIN EN 2395 (Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2398 DIN EN 2398 (Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for machined bolts - D ≤ 25 mm) | 2 | chevron_right |
| DIN EN 2399 DIN EN 2399 (Aerospace series. Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for forged bolts. D ≤ 25 mm) | 2 | chevron_right |
| DIN EN 2400 DIN EN 2400 (Aerospace series - Heat resisting nickel base alloy NI-P96-HT - Cold drawn and precipitation treated - Wire - D ≤ 10 mm) | 1 | chevron_right |
| DIN EN 2402 DIN EN 2402 (Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D ≤ 10 mm) | 1 | chevron_right |
| DIN EN 2422 DIN EN 2422 (Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm < a ≤ 120 mm) | 1 | chevron_right |
| DIN EN 2428 DIN EN 2428 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD) | 1 | chevron_right |
| DIN EN 2429 DIN EN 2429 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD) | 1 | chevron_right |
| DIN EN 2430 DIN EN 2430 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD) | 1 | chevron_right |
| DIN EN 2431 DIN EN 2431 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD) | 1 | chevron_right |
| DIN EN 2432 DIN EN 2432 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD) | 1 | chevron_right |
| DIN EN 2438 DIN EN 2438 (Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| DIN EN 2439 DIN EN 2439 (Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Forgings - De ≤ 40 mm) | 2 | chevron_right |
| DIN EN 2446 DIN EN 2446 (Aerospace series - Steel FE-PL1503 (35CrMo4) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 25 mm) | 2 | chevron_right |
| DIN EN 2448 DIN EN 2448 (Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| DIN EN 2450 DIN EN 2450 (Aerospace series - Steel 31NiMoCr10-5-3 1230 MPa ≤ Rm ≤ 1420 MPa - Bars - De ≤ 40 mm) | 1 | chevron_right |
| DIN EN 2451 DIN EN 2451 (Aerospace series - Steel 31NiMoCr10 - 5 - 3 - 1230 MPa ≤ Rm ≤ 1420 MPa - Forgings - De ≤ 40 mm) | 1 | chevron_right |
| DIN EN 2460 DIN EN 2460 (Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Bars - De ≤ 70 mm) | 2 | chevron_right |
| DIN EN 2461 DIN EN 2461 (Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Forgings - De ≤ 70 mm) | 2 | chevron_right |
| DIN EN 2465 DIN EN 2465 (Aerospace series - Steel X2CrNi18-9 - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bar for machining - 4 mm ≤ De ≤ 100 mm) | 2 | chevron_right |
| DIN EN 2466 DIN EN 2466 (Aerospace series - Steel FE-PA3901 (X2CrNi19-11) - Softened - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| DIN EN 2467 DIN EN 2467 (Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa) | 3 | chevron_right |
| DIN EN 2468 DIN EN 2468 (Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm ≤ a ≤ 5 mm) | 1 | chevron_right |
| DIN EN 2469 DIN EN 2469 (Aerospace series. Steel FE-PA3901 (X1CrNi18-10). Air melted. Softened. Wires. 0,4 mm ≤ D ≤ 12,5 mm. 450 MPa ≤ Rm ≤ 650 MPa) | 2 | chevron_right |
| DIN EN 2470 DIN EN 2470 (Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm ≤ D ≤ 10 mm) | 1 | chevron_right |
| DIN EN 2475 DIN EN 2475 (Aerospace series - Steel 30CrNiMo8 (1.6580) - Air melted - Hardened and tempered - Bar for machining - De ≤ 100 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| DIN EN 2476 DIN EN 2476 (Aerospace series - Steel 30CrNiMo8 (1.6580) - 1100 MPa ≤ Rm ≤ 1300 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| DIN EN 2478 DIN EN 2478 (Aerospace series - Steel FE-PL2107 (30NiCrMo16) - 1 220 MPa ≤ Rm ≤ 1 370 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| DIN EN 2480 DIN EN 2480 (Aerospace series - Steel 36NiCrMo16 (1.6773) - 1250 MPa ≤ Rm ≤ 1400 MPa - Bars - De ≤ 75 mm) | 2 | chevron_right |
| DIN EN 2481 DIN EN 2481 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Forgings - De ≤ 75 mm) | 2 | chevron_right |
| DIN EN 2482 DIN EN 2482 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 100 mm) | 2 | chevron_right |
| DIN EN 2483 DIN EN 2483 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| DIN EN 2486 DIN EN 2486 (Aerospace series - Aluminium alloy AL-P2618A - Forging stock) | 1 | chevron_right |
| DIN EN 2502 DIN EN 2502 (Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Bars) | 2 | chevron_right |
| DIN EN 2503 DIN EN 2503 (Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Forgings - De ≤ 150 mm) | 2 | chevron_right |
| DIN EN 2510 DIN EN 2510 (Aerospace series - Aluminium alloy 2024 - T42 - Drawn tubes for structural applications) | 1 | chevron_right |
| DIN EN 2511 DIN EN 2511 (Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm < a ≤ 100 mm) | 1 | chevron_right |
| DIN EN 2512 DIN EN 2512 (Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a ≤ 100 mm) | 1 | chevron_right |
| DIN EN 2540 DIN EN 2540 (Aerospace series - Steel X7CrNiAl17-7 (1.4568) - Air melted - Solution treated and precipitation hardened - Sheet and strip - a ≤ 6 mm - 1 240 MPa ≤ Rm ≤ 1 450 MPa) | 2 | chevron_right |
| DIN EN 2541 DIN EN 2541 (Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Wire for spring - D ≤ 4,0 mm) | 1 | chevron_right |
| DIN EN 2542 DIN EN 2542 (Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and wire - De ≤ 40 mm - For prevailing torque nuts) | 2 | chevron_right |
| DIN EN 2543 DIN EN 2543 (Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip - 0,3 mm ≤ a ≤ 2 mm - For prevailing torque nuts) | 2 | chevron_right |
| DIN EN 2566 DIN EN 2566 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD) | 1 | chevron_right |
| DIN EN 2567 DIN EN 2567 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD) | 1 | chevron_right |
| DIN EN 2568 DIN EN 2568 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD) | 1 | chevron_right |
| DIN EN 2573 DIN EN 2573 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Wires - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa) | 3 | chevron_right |
| DIN EN 2630 DIN EN 2630 (Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm with peripheral coarse grain control) | 1 | chevron_right |
| DIN EN 2632 DIN EN 2632 (Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| DIN EN 2633 DIN EN 2633 (Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control) | 1 | chevron_right |
| DIN EN 2635 DIN EN 2635 (Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bar and section - a or D ≤ 200 mm with peripheral coarse grain control) | 1 | chevron_right |
| DIN EN 2636 DIN EN 2636 (Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm with peripheral coarse grain control) | 1 | chevron_right |
| DIN EN 2638 DIN EN 2638 (Aerospace series - Aluminium alloy 2024-T3 - Extruded bar and section - 1,2 mm ≤ (a or D) ≤ 150 mm with coarse peripheral grain control) | 1 | chevron_right |
| DIN EN 2681 DIN EN 2681 (Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| DIN EN 2684 DIN EN 2684 (Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm < a ≤ 140 mm) | 1 | chevron_right |
| DIN EN 26848 DIN EN 26848 (Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding) | 9 | chevron_right |
| DIN EN 2687 DIN EN 2687 (Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| DIN EN 26871 DIN EN 26871 (Dentistry; dental base metal casting alloys (ISO 6871:1987)) | 1 | chevron_right |
| DIN EN 2693 DIN EN 2693 (Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2694 DIN EN 2694 (Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2695 DIN EN 2695 (Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2696 DIN EN 2696 (Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2699 DIN EN 2699 (Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm < D < 50 mm) | 1 | chevron_right |
| DIN EN 2702 DIN EN 2702 (Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Drawn or extruded bar and section - a or D ≤ 200 mm) | 1 | chevron_right |
| DIN EN 2703 DIN EN 2703 (Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2704 DIN EN 2704 (Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Drawn bars - De ≤ 75 mm) | 1 | chevron_right |
| DIN EN 2709 DIN EN 2709 (Aerospace series - Aluminium alloy 2024 - T3510 - Bars and sections -1.2 mm ≤ (a or D) ≤ 150 mm - With peripheral coarse grain control) | 1 | chevron_right |
| DIN EN 2726 DIN EN 2726 (Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a ≤ 20 mm) | 1 | chevron_right |
| DIN EN 2728 DIN EN 2728 (Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a ≤ 20 mm) | 1 | chevron_right |
| DIN EN 2731 DIN EN 2731 (Aerospace series - Magnesium alloy MG-C46001 - T6 - Sand casting) | 1 | chevron_right |
| DIN EN 2732 DIN EN 2732 (Aerospace series - Magnesium alloy MG-C46001-T6 - Chill casting) | 1 | chevron_right |
| DIN EN 2795 DIN EN 2795 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD) | 1 | chevron_right |
| DIN EN 2796 DIN EN 2796 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD) | 1 | chevron_right |
| DIN EN 2798 DIN EN 2798 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD) | 1 | chevron_right |
| DIN EN 2799 DIN EN 2799 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD) | 1 | chevron_right |
| DIN EN 2802 DIN EN 2802 (Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2803 DIN EN 2803 (Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 2813 DIN EN 2813 (Aerospace series - Aluminium alloy AL-P-6061 - T6 - Drawn tube for pressure applications - 0,6 mm ≤ a ≤ 12,5 mm) | 1 | chevron_right |
| DIN EN 2815 DIN EN 2815 (Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 965 MPa) | 2 | chevron_right |
| DIN EN 2816 DIN EN 2816 (Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 965 MPa) | 2 | chevron_right |
| DIN EN 2817 DIN EN 2817 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1070 MPa) | 2 | chevron_right |
| DIN EN 2818 DIN EN 2818 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1070 MPa) | 2 | chevron_right |
| DIN EN 2821 DIN EN 2821 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - Rm ≥ 1310 MPa) | 3 | chevron_right |
| DIN EN 2835 DIN EN 2835 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 40 IRHD) | 1 | chevron_right |
| DIN EN 2836 DIN EN 2836 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD) | 1 | chevron_right |
| DIN EN 2837 DIN EN 2837 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD) | 1 | chevron_right |
| DIN EN 2838 DIN EN 2838 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD) | 1 | chevron_right |
| DIN EN 2839 DIN EN 2839 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD) | 1 | chevron_right |
| DIN EN 2840 DIN EN 2840 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD) | 1 | chevron_right |
| DIN EN 2841 DIN EN 2841 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 60 IRHD) | 1 | chevron_right |
| DIN EN 2842 DIN EN 2842 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 70 IRHD) | 1 | chevron_right |
| DIN EN 2843 DIN EN 2843 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD) | 1 | chevron_right |
| DIN EN 2844 DIN EN 2844 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IRHD) | 1 | chevron_right |
| DIN EN 2845 DIN EN 2845 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 50 IRHD) | 1 | chevron_right |
| DIN EN 2846 DIN EN 2846 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD) | 1 | chevron_right |
| DIN EN 2847 DIN EN 2847 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 70 IRHD) | 1 | chevron_right |
| DIN EN 2848 DIN EN 2848 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 80 IRHD) | 1 | chevron_right |
| DIN EN 2849 DIN EN 2849 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD) | 1 | chevron_right |
| DIN EN 286-4 DIN EN 286-4 (Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway folling stock) | 10 | chevron_right |
| DIN EN 28839 DIN EN 28839 (Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals) | 28 | chevron_right |
| DIN EN 29453 DIN EN 29453 (Soft solder alloys. Chemical compositions and forms) | 74 | chevron_right |
| DIN EN 2947 DIN EN 2947 (Aerospace series. Steel FE-PA3004 (X10CrNi18-09). Air melted. Non heat treated. Cold drawn wire. a or D ≤ 2,3 mm) | 2 | chevron_right |
| DIN EN 2952 DIN EN 2952 (Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1270 MPa ≤ Rm ≤ 1550 MPa) | 1 | chevron_right |
| DIN EN 2959 DIN EN 2959 (Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners 3 mm ≤ D ≤ 30 mm) | 2 | chevron_right |
| DIN EN 2960 DIN EN 2960 (Aerospace series - Heat resisting nickel base alloy (NI-P101HT), Cold worked and solution treated - Bars for machining for fasteners 3 mm ≤ D ≤ 50 mm) | 1 | chevron_right |
| DIN EN 300 DIN EN 300 (Oriented Strand Boards (OSB) - Definitions, classification and specifications) | 4 | chevron_right |
| DIN EN 3018 DIN EN 3018 (Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm) | 2 | chevron_right |
| DIN EN 3115 DIN EN 3115 (Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D ≤ 10 mm) | 1 | chevron_right |
| DIN EN 312 DIN EN 312 (Particleboards - Specifications) | 7 | chevron_right |
| DIN EN 3120 DIN EN 3120 (Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress relieved - Seamless tube for pressure systems - 4 mm ≤ D ≤ 51 mm - 690 MPa ≤ Rm ≤ 1 030 MPa) | 1 | chevron_right |
| DIN EN 3160 DIN EN 3160 (Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1310 MPa) | 2 | chevron_right |
| DIN EN 3161 DIN EN 3161 (Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa) | 2 | chevron_right |
| DIN EN 3162 DIN EN 3162 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 930 MPa) | 3 | chevron_right |
| DIN EN 3163 DIN EN 3163 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| DIN EN 3219 DIN EN 3219 (Aerospace series - Heat resisting nickel base alloy (NI-P100HT) - Cold worked and softened - Bar and wire for continuous forging extrusion for fasteners - 3 mm ≤ D ≤ 30 mm) | 1 | chevron_right |
| DIN EN 3220 DIN EN 3220 (Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ≤ D ≤ 30 mm) | 1 | chevron_right |
| DIN EN 3310 DIN EN 3310 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Not heat treated - Forging stock, for annealed forgings - De ≤ 360 mm) | 2 | chevron_right |
| DIN EN 3311 DIN EN 3311 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar for machining - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1160 MPa) | 2 | chevron_right |
| DIN EN 3312 DIN EN 3312 (Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Forgings De ≤ 150 mm) | 2 | chevron_right |
| DIN EN 3314 DIN EN 3314 (Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D ≤ 75 mm) | 1 | chevron_right |
| DIN EN 3315 DIN EN 3315 (Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - De ≤ 75 mm) | 2 | chevron_right |
| DIN EN 3329 DIN EN 3329 (Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts) | 2 | chevron_right |
| DIN EN 3330 DIN EN 3330 (Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealead - Bar and wire - De ≤ 40 mm - For prevailing torque nuts) | 2 | chevron_right |
| DIN EN 3332 DIN EN 3332 (Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 3333 DIN EN 3333 (Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 3335 DIN EN 3335 (Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 3338 DIN EN 3338 (Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| DIN EN 3339 DIN EN 3339 (Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a ≤ 200 mm) | 1 | chevron_right |
| DIN EN 3341 DIN EN 3341 (Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 3342 DIN EN 3342 (Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D ≤ 150 mm) | 1 | chevron_right |
| DIN EN 3344 DIN EN 3344 (Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| DIN EN 3347 DIN EN 3347 (Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| DIN EN 3351 DIN EN 3351 (Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De ≤ 150 mm) | 1 | chevron_right |
| DIN EN 3354 DIN EN 3354 (Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Sheet for superplastic forming. a ≤ 6 mm) | 2 | chevron_right |
| DIN EN 3355 DIN EN 3355 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa) | 2 | chevron_right |
| DIN EN 3357 DIN EN 3357 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 150 mm - 1 200 MPa ≤ Rm ≤ 1 400 MPa) | 2 | chevron_right |
| DIN EN 3358 DIN EN 3358 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 150 mm - Rm ≥ 1400 MPa) | 2 | chevron_right |
| DIN EN 3359 DIN EN 3359 (Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Vacuum induction melted and consumable electrode remelted - softened - forging stocks - a or D ≤ 300 mm) | 3 | chevron_right |
| DIN EN 3361 DIN EN 3361 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6mm - 1070 MPa ≤ Rm ≤ 1220 MPa) | 3 | chevron_right |
| DIN EN 3364 DIN EN 3364 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted, softened - Forging stocks - a or D ≤ 300 mm) | 3 | chevron_right |
| DIN EN 3365 DIN EN 3365 (Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted, softened - forging stock - a or D ≤ 300 mm) | 3 | chevron_right |
| DIN EN 3378 DIN EN 3378 (Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets - 1,6 mm ≤ D ≤ 10 mm) | 1 | chevron_right |
| DIN EN 3451 DIN EN 3451 (Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock, for annealed forgings - a or D ≤ 300 mm) | 1 | chevron_right |
| DIN EN 3456 DIN EN 3456 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled - a ≤ 6 mm) | 2 | chevron_right |
| DIN EN 3459 DIN EN 3459 (Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a ≤ 50 mm) | 2 | chevron_right |
| DIN EN 3460 DIN EN 3460 (Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D ≤ 150 - Rm ≥ 390 MPa) | 1 | chevron_right |
| DIN EN 3464 DIN EN 3464 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm) | 2 | chevron_right |
| DIN EN 3468 DIN EN 3468 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 MPa ≤ Rm ≤ 700 MPa - Forgings - De ≤ 100 mm) | 3 | chevron_right |
| DIN EN 3469 DIN EN 3469 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa) | 2 | chevron_right |
| DIN EN 3470 DIN EN 3470 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1200 MPa ≤ Rm ≤ 1400 MPa) | 2 | chevron_right |
| DIN EN 3471 DIN EN 3471 (Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Strip for spring - a ≤ 4,0 mm) | 1 | chevron_right |
| DIN EN 3474 DIN EN 3474 (Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 3476 DIN EN 3476 (Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Softened. Forging stock. a or D ≤ 300 mm) | 2 | chevron_right |
| DIN EN 3479 DIN EN 3479 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa) | 3 | chevron_right |
| DIN EN 3480 DIN EN 3480 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Plates - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| DIN EN 3481 DIN EN 3481 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Hollow bars - 5 mm ≤ a ≤ 12 mm) | 3 | chevron_right |
| DIN EN 3482 DIN EN 3482 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Forging stock - De ≤ 100 mm) | 3 | chevron_right |
| DIN EN 3484 DIN EN 3484 (Aerospace series - Steel X5CrNiCuNb16-4 (1.4549 type 1.4542) - As cast - Reference heat treatment: homogenised, solution treated, precipitation hardened and sub zero - Remelting stock) | 3 | chevron_right |
| DIN EN 3486 DIN EN 3486 (Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Solution annealed and precipitation hardened - 1400 ≤ Rm ≤ 1550 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| DIN EN 3487 DIN EN 3487 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| DIN EN 3488 DIN EN 3488 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Sheets and strips - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| DIN EN 3489 DIN EN 3489 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 ≤ Rm ≤ 750 MPa - Tubes for structures - 0.5 ≤ a ≤ 5 mm) | 3 | chevron_right |
| DIN EN 3490 DIN EN 3490 (Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted - Hardened and tempered - Bars for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 3 | chevron_right |
| DIN EN 3491 DIN EN 3491 (Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 2 | chevron_right |
| DIN EN 3507 DIN EN 3507 (Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa) | 2 | chevron_right |
| DIN EN 3510 DIN EN 3510 (Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm) | 2 | chevron_right |
| DIN EN 3523 DIN EN 3523 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars for machining - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa) | 3 | chevron_right |
| DIN EN 3524 DIN EN 3524 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm ≤ a ≤ 6 mm - 1080 MPa ≤ Rm ≤ 1280 MPa) | 2 | chevron_right |
| DIN EN 3525 DIN EN 3525 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm ≤ a ≤ 20 mm - 1080 MPa ≤ Rm ≤ 1280 MPa) | 2 | chevron_right |
| DIN EN 3526 DIN EN 3526 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1180 MPa) | 2 | chevron_right |
| DIN EN 3527 DIN EN 3527 (Aerospace series - Steel 33CrMoV12 (1.8522) - Air melted - Softened - Forging stock - a or D ≤ 300 mm) | 3 | chevron_right |
| DIN EN 3528 DIN EN 3528 (Aerospace series. Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 2 | chevron_right |
| DIN EN 3529 DIN EN 3529 (Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 2 | chevron_right |
| DIN EN 3531 DIN EN 3531 (Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 3 | chevron_right |
| DIN EN 3532 DIN EN 3532 (Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 3 | chevron_right |
| DIN EN 3552 DIN EN 3552 (Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 3553 DIN EN 3553 (Aerospace series - Aluminium alloy AL-P2618A - T6511 - Extruded bar and section - a or D ≤ 160 mm) | 1 | chevron_right |
| DIN EN 3557 DIN EN 3557 (Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications - 0,6 mm ≤ a ≤ 3 mm) | 1 | chevron_right |
| DIN EN 3638 DIN EN 3638 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets, strips and plates - 0,5 ≤ a ≤ 10 mm) | 3 | chevron_right |
| DIN EN 3639 DIN EN 3639 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 3 | chevron_right |
| DIN EN 3666 DIN EN 3666 (Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1550 MPa ≤ Rm ≤ 1830 MPa) | 1 | chevron_right |
| DIN EN 3668 DIN EN 3668 (Aerospace series. Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9). Non heat treated. Forging stock. a or D ≤ 250 mm) | 2 | chevron_right |
| DIN EN 3671 DIN EN 3671 (Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D ≤ 250 mm) | 2 | chevron_right |
| DIN EN 3677 DIN EN 3677 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa) | 3 | chevron_right |
| DIN EN 3678 DIN EN 3678 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa) | 3 | chevron_right |
| DIN EN 3697 DIN EN 3697 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD) | 1 | chevron_right |
| DIN EN 3698 DIN EN 3698 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD) | 1 | chevron_right |
| DIN EN 3761 DIN EN 3761 (Aerospace series - Heat resisting alloy FE-PA2601 - Softened and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1100 MPa ≤ Rm ≤ 1300 MPa) | 1 | chevron_right |
| DIN EN 3762 DIN EN 3762 (Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold worked - Wire for forged fasteners - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| DIN EN 3813 DIN EN 3813 (Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. De ≤ 50 mm) | 2 | chevron_right |
| DIN EN 3816 DIN EN 3816 (Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened and cold rolled - Sheet and strip a ≤ 3 mm - Rm ≥ 800 MPa) | 2 | chevron_right |
| DIN EN 3825 DIN EN 3825 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD) | 1 | chevron_right |
| DIN EN 3826 DIN EN 3826 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD) | 1 | chevron_right |
| DIN EN 3827 DIN EN 3827 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD) | 1 | chevron_right |
| DIN EN 3872 DIN EN 3872 (Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a ≤ 200 mm) | 1 | chevron_right |
| DIN EN 3882 DIN EN 3882 (Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3883 DIN EN 3883 (Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3884 DIN EN 3884 (Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3885 DIN EN 3885 (Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3886 DIN EN 3886 (Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3887 DIN EN 3887 (Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3888 DIN EN 3888 (Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3889 DIN EN 3889 (Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3890 DIN EN 3890 (Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3892 DIN EN 3892 (Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding) | 1 | chevron_right |
| DIN EN 3893 DIN EN 3893 (Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding) | 1 | chevron_right |
| DIN EN 3894 DIN EN 3894 (Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3895 DIN EN 3895 (Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3896 DIN EN 3896 (Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 3897 DIN EN 3897 (Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding) | 2 | chevron_right |
| DIN EN 39 DIN EN 39 (Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions) | 2 | chevron_right |
| DIN EN 3917 DIN EN 3917 (Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3918 DIN EN 3918 (Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Tape) | 2 | chevron_right |
| DIN EN 3919 DIN EN 3919 (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| DIN EN 3920 DIN EN 3920 (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3921 DIN EN 3921 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| DIN EN 3922 DIN EN 3922 (Aerospace series - Nickel base alloy Ni-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| DIN EN 3923 DIN EN 3923 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3924 DIN EN 3924 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| DIN EN 3925 DIN EN 3925 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| DIN EN 3926 DIN EN 3926 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| DIN EN 3927 DIN EN 3927 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3928 DIN EN 3928 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| DIN EN 3930 DIN EN 3930 (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3931 DIN EN 3931 (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Tape) | 2 | chevron_right |
| DIN EN 3932 DIN EN 3932 (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| DIN EN 3933 DIN EN 3933 (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3934 DIN EN 3934 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| DIN EN 3935 DIN EN 3935 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| DIN EN 3936 DIN EN 3936 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3937 DIN EN 3937 (Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3938 DIN EN 3938 (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| DIN EN 3939 DIN EN 3939 (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3940 DIN EN 3940 (Aerospace series - Nickel base alloy NI-B46001 (NiCoSi5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| DIN EN 3941 DIN EN 3941 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| DIN EN 3942 DIN EN 3942 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| DIN EN 3943 DIN EN 3943 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3944 DIN EN 3944 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| DIN EN 3945 DIN EN 3945 (Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3946 DIN EN 3946 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3947 DIN EN 3947 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| DIN EN 3948 DIN EN 3948 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Wire) | 2 | chevron_right |
| DIN EN 3952 DIN EN 3952 (Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire) | 2 | chevron_right |
| DIN EN 3953 DIN EN 3953 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire) | 2 | chevron_right |
| DIN EN 3954 DIN EN 3954 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3955 DIN EN 3955 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| DIN EN 3956 DIN EN 3956 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire) | 2 | chevron_right |
| DIN EN 3957 DIN EN 3957 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3958 DIN EN 3958 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| DIN EN 3959 DIN EN 3959 (Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3960 DIN EN 3960 (Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| DIN EN 3961 DIN EN 3961 (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| DIN EN 3962 DIN EN 3962 (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire) | 2 | chevron_right |
| DIN EN 3963 DIN EN 3963 (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Rolled foil) | 1 | chevron_right |
| DIN EN 3964 DIN EN 3964 (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Wire) | 1 | chevron_right |
| DIN EN 3965 DIN EN 3965 (Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing - Rolled foil) | 1 | chevron_right |
| DIN EN 3969 DIN EN 3969 (Aerospace series. Steel FE-PL1507 (40CrMoV12). Air melted. Annealed. Forging stock. a or D ≤ 350 mm) | 2 | chevron_right |
| DIN EN 3971 DIN EN 3971 (Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm) | 2 | chevron_right |
| DIN EN 3972 DIN EN 3972 (Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa) | 2 | chevron_right |
| DIN EN 3973 DIN EN 3973 (Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa) | 2 | chevron_right |
| DIN EN 3979 DIN EN 3979 (Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 3982 DIN EN 3982 (Aerospace series - Aluminium alloy AL-P7050 - AlZn6CuMgZr - T7451 - Plates - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| DIN EN 3983 DIN EN 3983 (Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| DIN EN 3997 DIN EN 3997 (Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T3 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 3998 DIN EN 3998 (Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 3999 DIN EN 3999 (Aerospace series - Aluminium alloy AL-P2024-T351 - Sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4001 DIN EN 4001 (Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4002 DIN EN 4002 (Aerospace series. Aluminium alloy AL-P2219-T81. Sheet and strip 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4003 DIN EN 4003 (Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4004 DIN EN 4004 (Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4005 DIN EN 4005 (Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4006 DIN EN 4006 (Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4007 DIN EN 4007 (Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4085 DIN EN 4085 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| DIN EN 4098 DIN EN 4098 (Aerospace series - Steel 40CrMoV12 (1.8523) - Consumable electrode remelted - Hardened and tempered - Forgings - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa) | 3 | chevron_right |
| DIN EN 4099 DIN EN 4099 (Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4100 DIN EN 4100 (Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4101 DIN EN 4101 (Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4102 DIN EN 4102 (Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4103 DIN EN 4103 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| DIN EN 4104 DIN EN 4104 (Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing - Powder or paste) | 1 | chevron_right |
| DIN EN 4105 DIN EN 4105 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape) | 2 | chevron_right |
| DIN EN 4202 DIN EN 4202 (Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm < a ≤ 25 mm) | 1 | chevron_right |
| DIN EN 4203 DIN EN 4203 (Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4204 DIN EN 4204 (Aerospace series - Aluminium alloy AL-P8090 - T841 - Sheet - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4209 DIN EN 4209 (Aerospace series - Aluminium alloy AL-P2219-T851 - Plate - 6 mm < a ≤ 50 mm) | 1 | chevron_right |
| DIN EN 4211 DIN EN 4211 (Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6 mm < a ≤ 25 mm) | 1 | chevron_right |
| DIN EN 4212 DIN EN 4212 (Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| DIN EN 4213 DIN EN 4213 (Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| DIN EN 4214 DIN EN 4214 (Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm < a ≤ 20 mm) | 1 | chevron_right |
| DIN EN 4215 DIN EN 4215 (Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| DIN EN 4216 DIN EN 4216 (Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa) | 2 | chevron_right |
| DIN EN 4244 DIN EN 4244 (Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D 200 mm - 1 000 MPa Rm 1 140 MPa) | 1 | chevron_right |
| DIN EN 4245 DIN EN 4245 (Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - As forged - Forging stock - De 300 mm) | 1 | chevron_right |
| DIN EN 4247 DIN EN 4247 (Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm < a ≤ 140 mm) | 1 | chevron_right |
| DIN EN 4250 DIN EN 4250 (Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| DIN EN 4262 DIN EN 4262 (Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880 MPa) | 2 | chevron_right |
| DIN EN 4263 DIN EN 4263 (Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960 MPa) | 2 | chevron_right |
| DIN EN 4264 DIN EN 4264 (Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 - As forged - Forging stock - a or D ≤ 200 mm) | 2 | chevron_right |
| DIN EN 4283 DIN EN 4283 (Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm < a ≤ 40 mm) | 1 | chevron_right |
| DIN EN 4286 DIN EN 4286 (Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a ≤ 125 mm) | 1 | chevron_right |
| DIN EN 4287 DIN EN 4287 (Aerospace series - Aluminium alloy AL-P7010 - Forging stock) | 1 | chevron_right |
| DIN EN 4289 DIN EN 4289 (Aerospace series - Aluminium alloy AL-P7175- Forging stock) | 1 | chevron_right |
| DIN EN 4291 DIN EN 4291 (Aerospace series - Aluminium alloy AL-P8090 - Forging stock) | 1 | chevron_right |
| DIN EN 4292 DIN EN 4292 (Aerospace series - Aluminium alloy AL-R39002 - Forging stock) | 1 | chevron_right |
| DIN EN 4293 DIN EN 4293 (Aerospce series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D ≤ 150 mm) | 1 | chevron_right |
| DIN EN 4313 DIN EN 4313 (Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4314 DIN EN 4314 (Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4680) - Consumable electrode remelted - Not heat treated - Forging stock - a or D ≤ 250 mm) | 3 | chevron_right |
| DIN EN 4315 DIN EN 4315 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - a or D ≤ 100 mm - Rm ≥ 900 MPa) | 3 | chevron_right |
| DIN EN 4317 DIN EN 4317 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Not heat treated - Forging stock - a or D ≤ 200 mm) | 3 | chevron_right |
| DIN EN 4318 DIN EN 4318 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm - Rm ≥ 960 MPa) | 3 | chevron_right |
| DIN EN 4324 DIN EN 4324 (Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod) | 1 | chevron_right |
| DIN EN 4325 DIN EN 4325 (Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4326 DIN EN 4326 (Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4327 DIN EN 4327 (Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4328 DIN EN 4328 (Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4329 DIN EN 4329 (Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4330 DIN EN 4330 (Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4331 DIN EN 4331 (Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4332 DIN EN 4332 (Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4333 DIN EN 4333 (Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4334 DIN EN 4334 (Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4335 DIN EN 4335 (Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4336 DIN EN 4336 (Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4337 DIN EN 4337 (Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn3) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4338 DIN EN 4338 (Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4339 DIN EN 4339 (Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4340 DIN EN 4340 (Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| DIN EN 4341 DIN EN 4341 (Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| DIN EN 4342 DIN EN 4342 (Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| DIN EN 4343 DIN EN 4343 (Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4344 DIN EN 4344 (Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4346 DIN EN 4346 (Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm) | 2 | chevron_right |
| DIN EN 4347 DIN EN 4347 (Aerospace series Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm) | 2 | chevron_right |
| DIN EN 4372 DIN EN 4372 (Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D ≤ 10 mm) | 2 | chevron_right |
| DIN EN 4373 DIN EN 4373 (Aerospace series. Heat resisting alloy NI-PD9001 (NiCu31). Annealed, seamless tube D ≤ 75 mm, a ≤ 3 mm) | 2 | chevron_right |
| DIN EN 4374 DIN EN 4374 (Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - De ≤ 200 mm) | 2 | chevron_right |
| DIN EN 4376 DIN EN 4376 (Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated - Bar and section, De ≤ 200 mm) | 2 | chevron_right |
| DIN EN 4377 DIN EN 4377 (Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| DIN EN 4379 DIN EN 4379 (Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De ≤ 200 mm) | 2 | chevron_right |
| DIN EN 4382 DIN EN 4382 (Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D ≤ 50 mm, a ≤ 3 mm) | 2 | chevron_right |
| DIN EN 4383 DIN EN 4383 (Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock) | 2 | chevron_right |
| DIN EN 4384 DIN EN 4384 (Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock) | 2 | chevron_right |
| DIN EN 440 DIN EN 440 (Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification) | 10 | chevron_right |
| DIN EN 4449 DIN EN 4449 (Aerospace series - Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4450 DIN EN 4450 (Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| DIN EN 4461 DIN EN 4461 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa) | 2 | chevron_right |
| DIN EN 4462 DIN EN 4462 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa) | 2 | chevron_right |
| DIN EN 4463 DIN EN 4463 (Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| DIN EN 4464 DIN EN 4464 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 200 MPa) | 2 | chevron_right |
| DIN EN 4465 DIN EN 4465 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 300 MPa) | 2 | chevron_right |
| DIN EN 4466 DIN EN 4466 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 400 MPa) | 2 | chevron_right |
| DIN EN 4467 DIN EN 4467 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa) | 2 | chevron_right |
| DIN EN 4468 DIN EN 4468 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa) | 2 | chevron_right |
| DIN EN 4469 DIN EN 4469 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| DIN EN 4470 DIN EN 4470 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1200 MPa) | 2 | chevron_right |
| DIN EN 4471 DIN EN 4471 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1300 MPa) | 2 | chevron_right |
| DIN EN 4472 DIN EN 4472 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| DIN EN 4528 DIN EN 4528 (Aerospace series. Steel FE-PA 3903 (X10CrNi18-8) - Cold rolled - Strip for springs. a ≤ 3 mm. 1250 MPa ≤ Rm ≤ 1640 MPa) | 2 | chevron_right |
| DIN EN 4566 DIN EN 4566 (Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| DIN EN 4570 DIN EN 4570 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 Solution treated Forgings De ≤ 100 mm) | 2 | chevron_right |
| DIN EN 4571 DIN EN 4571 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Bars and sections - De = 100 mm) | 2 | chevron_right |
| DIN EN 4572 DIN EN 4572 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Sheets and strips - a ≤ 3 mm) | 2 | chevron_right |
| DIN EN 4573 DIN EN 4573 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm) | 2 | chevron_right |
| DIN EN 4574 DIN EN 4574 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| DIN EN 4575 DIN EN 4575 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and descaled - Sheets and plates - 3 mm < a ≤ 50 mm) | 2 | chevron_right |
| DIN EN 4615 DIN EN 4615 (Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting) | 1 | chevron_right |
| DIN EN 4616 DIN EN 4616 (Aerospace series - Magnesium alloy MG-C18002 - T4 - Chill casting) | 1 | chevron_right |
| DIN EN 4627 DIN EN 4627 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 3 | chevron_right |
| DIN EN 4628 DIN EN 4628 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| DIN EN 4629 DIN EN 4629 (Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De ≤ 300 mm) | 2 | chevron_right |
| DIN EN 4630 DIN EN 4630 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 3 | chevron_right |
| DIN EN 4631 DIN EN 4631 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 3 | chevron_right |
| DIN EN 4642 DIN EN 4642 (Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 2 | chevron_right |
| DIN EN 4655 DIN EN 4655 (Aerospace series. Steel FEPM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| DIN EN 4656 DIN EN 4656 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1520 MPa) | 2 | chevron_right |
| DIN EN 4657 DIN EN 4657 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation remelted - Bars - a or D < 200 mm - Rm > 1 650 MPa) | 2 | chevron_right |
| DIN EN 4658 DIN EN 4658 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 520 MPa) | 2 | chevron_right |
| DIN EN 4659 DIN EN 4659 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 650 Mpa) | 2 | chevron_right |
| DIN EN 4670 DIN EN 4670 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| DIN EN 4671 DIN EN 4671 (Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1400 MPa) | 2 | chevron_right |
| DIN EN 4672 DIN EN 4672 (Aerospace series - Steel FE-PM1504 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| DIN EN 4675 DIN EN 4675 (Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Bars - De < 110 mm) | 2 | chevron_right |
| DIN EN 4683 DIN EN 4683 (Aerospace series - Steel FE-WM 3504 (X4CrNiMo16-5-1) - Air melted - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| DIN EN 4685 DIN EN 4685 (Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 mm - Rm ≥ 1 240 MPa) | 1 | chevron_right |
| DIN EN 4720 DIN EN 4720 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| DIN EN 4721 DIN EN 4721 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 2 | chevron_right |
| DIN EN 4725 DIN EN 4725 (Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm < a ≤ 150 mm) | 1 | chevron_right |
| DIN EN 4825 DIN EN 4825 (Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consumable electrode remelted - Hardened and tempered - Bars - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1100 MPa) | 2 | chevron_right |
| DIN EN 4842 DIN EN 4842 (Aerospace series - X5CrNiCu15-5 (1.4545)- Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining, a or D ≤ 250 mm, 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)) | 2 | chevron_right |
| DIN EN 485-2 DIN EN 485-2 (Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties) | 110 | chevron_right |
| DIN EN 486 DIN EN 486 (Aluminium and aluminium alloys - Extrusion ingots - Specifications) | 444 | chevron_right |
| DIN EN 487 DIN EN 487 (Aluminium and aluminium alloys - Rolling ingots - Specifications) | 184 | chevron_right |
| DIN EN 4882 DIN EN 4882 (Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa) | 2 | chevron_right |
| DIN EN 4883 DIN EN 4883 (Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Plates - 6 mm ≤ a ≤ 100 mm - Rm ≥ 1 070 MPa) | 2 | chevron_right |
| DIN EN 4884 DIN EN 4884 (Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa) | 2 | chevron_right |
| DIN EN 4890 DIN EN 4890 (Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1050 MPa) | 1 | chevron_right |
| DIN EN 4900 DIN EN 4900 (Aerospace series - Aluminium alloy 5086 - H111 - Extruded bars - 10 mm ≤ D ≤ 300 mm) | 1 | chevron_right |
| DIN EN 4904 DIN EN 4904 (Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa - Bars - 100 mm ≤ D ≤ 250 mm) | 2 | chevron_right |
| DIN EN 499 DIN EN 499 (Welding consumables - Covered electrodes for manual metal arc welding of non alloy and fine grain steels) | 7 | chevron_right |
| DIN EN 50149 DIN EN 50149 (Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires) | 20 | chevron_right |
| DIN EN 50183 DIN EN 50183 (Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires) | 6 | chevron_right |
| DIN EN 50189 DIN EN 50189 (Conductors for overhead lines. Zinc coated steel wires) | 6 | chevron_right |
| DIN EN 50307 DIN EN 50307 (Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables) | 23 | chevron_right |
| DIN EN 541 DIN EN 541 (Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications) | 22 | chevron_right |
| DIN EN 546-2 DIN EN 546-2 (Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties) | 22 | chevron_right |
| DIN EN 549 DIN EN 549 (Rubber materials for seals and diaphragms for gas appliances and gas equipment) | 60 | chevron_right |
| DIN EN 570 DIN EN 570 (Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification) | 47 | chevron_right |
| DIN EN 573-3 DIN EN 573-3 (Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products) | 454 | chevron_right |
| DIN EN 575 DIN EN 575 (Aluminium and aluminium alloys - Master alloys produced by melting - Specifications) | 100 | chevron_right |
| DIN EN 576 DIN EN 576 (Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications) | 54 | chevron_right |
| DIN EN 586-2 DIN EN 586-2 (Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements) | 12 | chevron_right |
| DIN EN 601 DIN EN 601 (Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff) | 1 | chevron_right |
| DIN EN 602 DIN EN 602 (Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff) | 1 | chevron_right |
| DIN EN 603-2 DIN EN 603-2 (Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties) | 18 | chevron_right |
| DIN EN 60454-3-1 DIN EN 60454-3-1 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3-1: Specifications for individual materials - PVC film tapes with pressure-sensitive adhesive) | 12 | chevron_right |
| DIN EN 60454-3-11 DIN EN 60454-3-11 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives) | 13 | chevron_right |
| DIN EN 60454-3-12 DIN EN 60454-3-12 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive) | 9 | chevron_right |
| DIN EN 60454-3-14 DIN EN 60454-3-14 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive) | 5 | chevron_right |
| DIN EN 60454-3-19 DIN EN 60454-3-19 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides) | 4 | chevron_right |
| DIN EN 60454-3-2 DIN EN 60454-3-2 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives) | 8 | chevron_right |
| DIN EN 60454-3-4 DIN EN 60454-3-4 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive) | 2 | chevron_right |
| DIN EN 60454-3-7 DIN EN 60454-3-7 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive) | 4 | chevron_right |
| DIN EN 60454-3-8 DIN EN 60454-3-8 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fiber) | 5 | chevron_right |
| DIN EN 60672-3 DIN EN 60672-3 (Ceramic and glass-insulating materials - Part 3: Specifications for individual materials) | 54 | chevron_right |
| DIN EN 60674-3-1 DIN EN 60674-3-1 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors) | 12 | chevron_right |
| DIN EN 60674-3-4 to 6 DIN EN 60674-3-4 to 6 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation) | 12 | chevron_right |
| DIN EN 60674-3-7 DIN EN 60674-3-7 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation) | 3 | chevron_right |
| DIN EN 60674-3-8 DIN EN 60674-3-8 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation) | 3 | chevron_right |
| DIN EN 60893-3-2 DIN EN 60893-3-2 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins) | 20 | chevron_right |
| DIN EN 60893-3-3 DIN EN 60893-3-3 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 606893-3-3)) | 2 | chevron_right |
| DIN EN 60893-3-4 DIN EN 60893-3-4 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4)) | 18 | chevron_right |
| DIN EN 60893-3-5 DIN EN 60893-3-5 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins) | 5 | chevron_right |
| DIN EN 60893-3-6 DIN EN 60893-3-6 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins) | 2 | chevron_right |
| DIN EN 60893-3-7 DIN EN 60893-3-7 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimid resins) | 1 | chevron_right |
| DIN EN 610 DIN EN 610 (Tin and tin alloys - Ingot tin) | 5 | chevron_right |
| DIN EN 611-1 DIN EN 611-1 (Tin and tin alloys - Pewter and pewterware - Part 1: Pewter) | 6 | chevron_right |
| DIN EN 611-2 DIN EN 611-2 (Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware) | 3 | chevron_right |
| DIN EN 61212-3-1 DIN EN 61212-3-1 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes) | 15 | chevron_right |
| DIN EN 61212-3-2 DIN EN 61212-3-2 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated molded tubes) | 6 | chevron_right |
| DIN EN 61212-3-3 DIN EN 61212-3-3 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated molded rods) | 11 | chevron_right |
| DIN EN 61249-2-1 DIN EN 61249-2-1 (Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad) | 3 | chevron_right |
| DIN EN 61249-2-10 DIN EN 61249-2-10 (Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| DIN EN 61249-2-11 DIN EN 61249-2-11 (Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| DIN EN 61249-2-2 DIN EN 61249-2-2 (Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad) | 4 | chevron_right |
| DIN EN 61249-2-21 DIN EN 61249-2-21 (Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| DIN EN 61249-2-22 DIN EN 61249-2-22 (Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| DIN EN 61249-2-23 DIN EN 61249-2-23 (Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad) | 3 | chevron_right |
| DIN EN 61249-2-26 DIN EN 61249-2-26 (Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| DIN EN 61249-2-27 DIN EN 61249-2-27 (Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| DIN EN 61249-2-30 DIN EN 61249-2-30 (Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| DIN EN 61249-2-35 DIN EN 61249-2-35 (Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| DIN EN 61249-2-36 DIN EN 61249-2-36 (Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| DIN EN 61249-2-37 DIN EN 61249-2-37 (Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| DIN EN 61249-2-38 DIN EN 61249-2-38 (Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| DIN EN 61249-2-39 DIN EN 61249-2-39 (Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| DIN EN 61249-2-40 DIN EN 61249-2-40 (Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| DIN EN 61249-2-41 DIN EN 61249-2-41 (Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| DIN EN 61249-2-42 DIN EN 61249-2-42 (Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| DIN EN 61249-2-43 DIN EN 61249-2-43 (Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| DIN EN 61249-2-44 DIN EN 61249-2-44 (Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| DIN EN 61249-2-5 DIN EN 61249-2-5 (Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core / woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| DIN EN 61249-2-6 DIN EN 61249-2-6 (Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| DIN EN 61249-2-8 DIN EN 61249-2-8 (Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| DIN EN 61249-2-9 DIN EN 61249-2-9 (Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| DIN EN 622-2 DIN EN 622-2 (Fibreboards - Specifications - Part 2: Requirements for hardboards) | 6 | chevron_right |
| DIN EN 622-3 DIN EN 622-3 (Fibreboards - Specifications - Part 3: Requirements for medium boards) | 10 | chevron_right |
| DIN EN 622-4 DIN EN 622-4 (Fibreboards - Specifications - Part 4: Requirements for softboards) | 5 | chevron_right |
| DIN EN 622-5 DIN EN 622-5 (Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)) | 9 | chevron_right |
| DIN EN 683-2 DIN EN 683-2 (Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties) | 26 | chevron_right |
| DIN EN 754-2 DIN EN 754-2 (Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties) | 100 | chevron_right |
| DIN EN 755-2 DIN EN 755-2 (Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties) | 140 | chevron_right |
| DIN EN 756 DIN EN 756 (Welding consumables - Solid wire, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels) | 34 | chevron_right |
| DIN EN 757 DIN EN 757 (Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification) | 9 | chevron_right |
| DIN EN 758 DIN EN 758 (Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels) | 8 | chevron_right |
| DIN EN 988 DIN EN 988 (Zinc and zinc alloys - Specifications for rolled flat products for building) | 1 | chevron_right |
| DIN EN IEC 60674-3-2 DIN EN IEC 60674-3-2 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation) | 5 | chevron_right |
| DIN EN IEC 60674-3-3 DIN EN IEC 60674-3-3 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation) | 6 | chevron_right |
| DIN EN IEC 60674-3-4 DIN EN IEC 60674-3-4 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4: Polyimide films used for electrical insulation) | 7 | chevron_right |
| DIN EN IEC 61249-2-45 DIN EN IEC 61249-2-45 (Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| DIN EN IEC 61249-2-46 DIN EN IEC 61249-2-46 (Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| DIN EN IEC 61249-2-47 DIN EN IEC 61249-2-47 (Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2.0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| DIN EN ISO 10081-1 DIN EN ISO 10081-1 (Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003)) | 13 | chevron_right |
| DIN EN ISO 10081-2 DIN EN ISO 10081-2 (Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon (ISO 10081-2:2003)) | 36 | chevron_right |
| DIN EN ISO 10081-3 DIN EN ISO 10081-3 (Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 50% residual carbon (ISO 10081-3:2003)) | 96 | chevron_right |
| DIN EN ISO 10081-4 DIN EN ISO 10081-4 (Classification of dense shaped refractory products - Part 4: Special products (ISO 10081-4:2014)) | 175 | chevron_right |
| DIN EN ISO 10366-1 DIN EN ISO 10366-1 (Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002)) | 11 | chevron_right |
| DIN EN ISO 1071 DIN EN ISO 1071 (Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification) | 41 | chevron_right |
| DIN EN ISO 11542-1 DIN EN ISO 11542-1 (Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001)) | 9 | chevron_right |
| DIN EN ISO 1163-1 DIN EN ISO 1163-1 (Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995)) | 24 | chevron_right |
| DIN EN ISO 11833-1 DIN EN ISO 11833-1 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)) | 24 | chevron_right |
| DIN EN ISO 11833-2 DIN EN ISO 11833-2 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)) | 7 | chevron_right |
| DIN EN ISO 11960 DIN EN ISO 11960 (Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells) | 24 | chevron_right |
| DIN EN ISO 11961 DIN EN ISO 11961 (Petroleum and natural gas industries - Steel drill pipe) | 16 | chevron_right |
| DIN EN ISO 11963 DIN EN ISO 11963 (Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2019)) | 14 | chevron_right |
| DIN EN ISO 12153 DIN EN ISO 12153 (Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification) | 21 | chevron_right |
| DIN EN ISO 12683 DIN EN ISO 12683 (Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004)) | 27 | chevron_right |
| DIN EN ISO 13085 DIN EN ISO 13085 (Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells (ISO 13085:2014)) | 4 | chevron_right |
| DIN EN ISO 13356 DIN EN ISO 13356 (Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO 13356:2015)) | 1 | chevron_right |
| DIN EN ISO 13680 DIN EN ISO 13680 (Oil and gas industries including lower carbon energy - Corrosion - resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material -Technical delivery conditions) | 101 | chevron_right |
| DIN EN ISO 14172 DIN EN ISO 14172 (Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015)) | 51 | chevron_right |
| DIN EN ISO 14343 DIN EN ISO 14343 (Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification) | 125 | chevron_right |
| DIN EN ISO 1456 DIN EN ISO 1456 (Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium) | 382 | chevron_right |
| DIN EN ISO 14631 DIN EN ISO 14631 (Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:2021)) | 3 | chevron_right |
| DIN EN ISO 14632 DIN EN ISO 14632 (Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021)) | 4 | chevron_right |
| DIN EN ISO 15013 DIN EN ISO 15013 (Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007)) | 7 | chevron_right |
| DIN EN ISO 15015 DIN EN ISO 15015 (Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)) | 4 | chevron_right |
| DIN EN ISO 15527 DIN EN ISO 15527 (Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018)) | 4 | chevron_right |
| DIN EN ISO 15546 DIN EN ISO 15546 (Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011)) | 4 | chevron_right |
| DIN EN ISO 16120-2 DIN EN ISO 16120-2 (Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod) | 60 | chevron_right |
| DIN EN ISO 16120-3 DIN EN ISO 16120-3 (Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod) | 6 | chevron_right |
| DIN EN ISO 16120-4 DIN EN ISO 16120-4 (Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications) | 68 | chevron_right |
| DIN EN ISO 1622-1 DIN EN ISO 1622-1 (Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:2012)) | 7 | chevron_right |
| DIN EN ISO 16834 DIN EN ISO 16834 (Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)) | 47 | chevron_right |
| DIN EN ISO 17633 DIN EN ISO 17633 (Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2025)) | 94 | chevron_right |
| DIN EN ISO 17634 DIN EN ISO 17634 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)) | 23 | chevron_right |
| DIN EN ISO 17672 DIN EN ISO 17672 (Brazing - Filler metals) | 148 | chevron_right |
| DIN EN ISO 17777 DIN EN ISO 17777 (Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification) | 46 | chevron_right |
| DIN EN ISO 18273 DIN EN ISO 18273 (Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification) | 70 | chevron_right |
| DIN EN ISO 18274 DIN EN ISO 18274 (Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification) | 74 | chevron_right |
| DIN EN ISO 18276 DIN EN ISO 18276 (Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification (ISO 18276:2017)) | 28 | chevron_right |
| DIN EN ISO 1872-1 DIN EN ISO 1872-1 (Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993)) | 59 | chevron_right |
| DIN EN ISO 1873-1 DIN EN ISO 1873-1 (Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995)) | 18 | chevron_right |
| DIN EN ISO 1874-1 DIN EN ISO 1874-1 (Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1874-1:2010)) | 522 | chevron_right |
| DIN EN ISO 19288 DIN EN ISO 19288 (Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification) | 28 | chevron_right |
| DIN EN ISO 19598 DIN EN ISO 19598 (Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment) | 19 | chevron_right |
| DIN EN ISO 20378 DIN EN ISO 20378 (Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification) | 10 | chevron_right |
| DIN EN ISO 2081 DIN EN ISO 2081 (Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel) | 18 | chevron_right |
| DIN EN ISO 2082 DIN EN ISO 2082 (Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017)) | 18 | chevron_right |
| DIN EN ISO 21305-1 DIN EN ISO 21305-1 (Plastics - Polycarbonate (PC) molding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019)) | 7 | chevron_right |
| DIN EN ISO 2179 DIN EN ISO 2179 (Electroplated coatings of tin-nickel alloy - Specification and test methods (ISO 2179:1986)) | 4 | chevron_right |
| DIN EN ISO 22068 DIN EN ISO 22068 (Sintered-metal injection-moulded materials - Specifications) | 36 | chevron_right |
| DIN EN ISO 24023-1 DIN EN ISO 24023-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials, Part 1: Designation system and basis for specifications) | 2 | chevron_right |
| DIN EN ISO 24034 DIN EN ISO 24034 (Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification) | 72 | chevron_right |
| DIN EN ISO 24373 DIN EN ISO 24373 (Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification) | 56 | chevron_right |
| DIN EN ISO 2560 DIN EN ISO 2560 (Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification) | 96 | chevron_right |
| DIN EN ISO 2580-1 DIN EN ISO 2580-1 (Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002)) | 41 | chevron_right |
| DIN EN ISO 26304 DIN EN ISO 26304 (Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification) | 62 | chevron_right |
| DIN EN ISO 2702 DIN EN ISO 2702 (Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)) | 12 | chevron_right |
| DIN EN ISO 28941-1 DIN EN ISO 28941-1 (Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 28941-1:2008)) | 20 | chevron_right |
| DIN EN ISO 2897-1 DIN EN ISO 2897-1 (Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997)) | 12 | chevron_right |
| DIN EN ISO 2898-1 DIN EN ISO 2898-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996)) | 2 | chevron_right |
| DIN EN ISO 29988-1 DIN EN ISO 29988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 29988-1:2019)) | 22 | chevron_right |
| DIN EN ISO 3183 DIN EN ISO 3183 (Petroleum and natural gas industries - Steel pipe for pipeline transportation systems) | 220 | chevron_right |
| DIN EN ISO 3506-1 DIN EN ISO 3506-1 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)) | 40 | chevron_right |
| DIN EN ISO 3506-2 DIN EN ISO 3506-2 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes) | 80 | chevron_right |
| DIN EN ISO 3506-3 DIN EN ISO 3506-3 (Fasteners - Mechanical properties of corrosion resistant stainless steel fasteners - Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes) | 16 | chevron_right |
| DIN EN ISO 3506-4 DIN EN ISO 3506-4 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws with specified grades and hardness classes) | 28 | chevron_right |
| DIN EN ISO 3506-5 DIN EN ISO 3506-5 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications) | 9 | chevron_right |
| DIN EN ISO 3506-6 DIN EN ISO 3506-6 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)) | 41 | chevron_right |
| DIN EN ISO 3506-7 DIN EN ISO 3506-7 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 7: Flat washers with specified grades and property classes) | 18 | chevron_right |
| DIN EN ISO 4042 DIN EN ISO 4042 (Fasteners - Electroplated coating systems (ISO 4042:2022)) | 72 | chevron_right |
| DIN EN ISO 4613-1 DIN EN ISO 4613-1 (Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993)) | 52 | chevron_right |
| DIN EN ISO 4894-1 DIN EN ISO 4894-1 (Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997)) | 3 | chevron_right |
| DIN EN ISO 4957 DIN EN ISO 4957 (Tool steels) | 96 | chevron_right |
| DIN EN ISO 5451 DIN EN ISO 5451 (Ferrovanadium - Specification and conditions of delivery) | 6 | chevron_right |
| DIN EN ISO 5755 DIN EN ISO 5755 (Sintered metal materials. Specifications (ISO 5755:2022)) | 205 | chevron_right |
| DIN EN ISO 5832-1 DIN EN ISO 5832-1 (Implants for surgery - Metallic materials - Part 1: Wrought stainless steel) | 1 | chevron_right |
| DIN EN ISO 5832-2 DIN EN ISO 5832-2 (Implants for surgery - Metallic materials - Part 2: Unalloyed titanium) | 6 | chevron_right |
| DIN EN ISO 5832-3 DIN EN ISO 5832-3 (Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy) | 2 | chevron_right |
| DIN EN ISO 5832-6 DIN EN ISO 5832-6 (Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:2022)) | 1 | chevron_right |
| DIN EN ISO 5832-7 DIN EN ISO 5832-7 (Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy) | 1 | chevron_right |
| DIN EN ISO 636 DIN EN ISO 636 (Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification) | 37 | chevron_right |
| DIN EN ISO 6402-1 DIN EN ISO 6402-1 (Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 6402-1:2002)) | 25 | chevron_right |
| DIN EN ISO 6501 DIN EN ISO 6501 (Ferronickel - Specification and delivery requirements) | 5 | chevron_right |
| DIN EN ISO 683-1 DIN EN ISO 683-1 (Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering) | 28 | chevron_right |
| DIN EN ISO 683-17 DIN EN ISO 683-17 (Heat-treatable steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels) | 73 | chevron_right |
| DIN EN ISO 683-2 DIN EN ISO 683-2 (Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering) | 50 | chevron_right |
| DIN EN ISO 683-3 DIN EN ISO 683-3 (Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels) | 72 | chevron_right |
| DIN EN ISO 683-4 DIN EN ISO 683-4 (Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels) | 21 | chevron_right |
| DIN EN ISO 683-5 DIN EN ISO 683-5 (Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels) | 11 | chevron_right |
| DIN EN ISO 683-7 DIN EN ISO 683-7 (Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels) | 167 | chevron_right |
| DIN EN ISO 6848 DIN EN ISO 6848 (Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)) | 11 | chevron_right |
| DIN EN ISO 6931-1 DIN EN ISO 6931-1 (Stainless steels for springs - Part 1:Wire) | 16 | chevron_right |
| DIN EN ISO 7153-1 DIN EN ISO 7153-1 (Surgical instruments - Materials - Part 1: Metals) | 50 | chevron_right |
| DIN EN ISO 7391-1 DIN EN ISO 7391-1 (Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 60 | chevron_right |
| DIN EN ISO 7792-1 DIN EN ISO 7792-1 (Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7792-1:2012)) | 225 | chevron_right |
| DIN EN ISO 7823-1 DIN EN ISO 7823-1 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)) | 1 | chevron_right |
| DIN EN ISO 7823-2 DIN EN ISO 7823-2 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)) | 1 | chevron_right |
| DIN EN ISO 7823-3 DIN EN ISO 7823-3 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2001)) | 1 | chevron_right |
| DIN EN ISO 8257-1 DIN EN ISO 8257-1 (Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998)) | 37 | chevron_right |
| DIN EN ISO 898-1 DIN EN ISO 898-1 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013)) | 10 | chevron_right |
| DIN EN ISO 898-2 DIN EN ISO 898-2 (Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)) | 7 | chevron_right |
| DIN EN ISO 898-3 DIN EN ISO 898-3 (Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes) | 4 | chevron_right |
| DIN EN ISO 898-5 DIN EN ISO 898-5 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread) | 4 | chevron_right |
| DIN EN ISO 898-6 DIN EN ISO 898-6 (Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread) | 7 | chevron_right |
| DIN EN ISO 8986-1 DIN EN ISO 8986-1 (Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:2009)) | 16 | chevron_right |
| DIN EN ISO 9351 DIN EN ISO 9351 (Galvanic anodes for cathodic protection in seawater and saline sediments) | 13 | chevron_right |
| DIN EN ISO 9453 DIN EN ISO 9453 (Soft solder alloys - Chemical compositions and forms) | 177 | chevron_right |
| DIN EN ISO 9717 DIN EN ISO 9717 (Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)) | 3 | chevron_right |
| DIN EN ISO 9988-1 DIN EN ISO 9988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 9988-1:2004)) | 97 | chevron_right |
| DIN ENV 10080 DIN ENV 10080 (Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric) | 4 | chevron_right |
| DIN ISO 4381 DIN ISO 4381 (Plain bearings - Tin casting alloys for multilayer plain bearings) | 3 | chevron_right |
| DIN prEN 10138-2 DIN prEN 10138-2 (Prestressing steels - Part 2: wire) | 8 | chevron_right |
| DIN prEN 10138-3 DIN prEN 10138-3 (Prestressing steels - Part 3: strand) | 22 | chevron_right |
| DIN prEN 10138-4 DIN prEN 10138-4 (Prestressing steels - Part 4: bars) | 6 | chevron_right |
| DIN prEN 10268 DIN prEN 10268 (Cold rolled flat products higher yield strength for cold forming - Technical delivery conditions) | 19 | chevron_right |
| DIN prEN 10338 DIN prEN 10338 (Hot rolled and cold rolled non-coated flat products of multiphase steels for cold forming - Technical delivery conditions) | 4 | chevron_right |
| DIN V 17900 DIN V 17900 (Copper and copper alloys - European materials - Compendium of compositions and products (CR 13388:1998)) | 595 | chevron_right |
| Electrical heating alloys | 1 | chevron_right |
| Fine grain steel | 2 | chevron_right |
| Fine grained carbon steel | 5 | chevron_right |
| Fine grained killed carbon steel | 1 | chevron_right |
| Fine grained low carbon steel | 11 | chevron_right |
| Fine grained steel | 3 | chevron_right |
| Fine grained steels for cold pressing | 2 | chevron_right |
| Flat products for pressure purposes | 1 | chevron_right |
| Flat products; Hot rolled sheet and strip | 1 | chevron_right |
| Free-cutting alloyed CrMoS steel | 2 | chevron_right |
| Free-cutting alloyed NiCrMo steel | 2 | chevron_right |
| Free-cutting heat-treatable steel | 10 | chevron_right |
| Free-cutting steel | 4 | chevron_right |
| Hardened steel; Ball and roller bearing steels | 2 | chevron_right |
| Heat treatable alloyed Cr steel | 11 | chevron_right |
| Heat treatable alloyed CrB steel | 2 | chevron_right |
| Heat treatable alloyed CrMnMo steel | 28 | chevron_right |
| Heat treatable alloyed CrMnMoPb steel | 6 | chevron_right |
| Heat treatable alloyed CrMnMoV steel | 4 | chevron_right |
| Heat treatable alloyed CrMnV steel | 8 | chevron_right |
| Heat treatable alloyed CrMo steel | 4 | chevron_right |
| Heat treatable alloyed CrMoNi steel | 2 | chevron_right |
| Heat treatable alloyed CrNiMo steel | 2 | chevron_right |
| Heat treatable alloyed CrSiMnMo steel | 2 | chevron_right |
| Heat treatable alloyed CrSiMo steel | 2 | chevron_right |
| Heat treatable alloyed CrSiMoV steel | 2 | chevron_right |
| Heat treatable alloyed CrVMo steel | 2 | chevron_right |
| Heat treatable alloyed MnCr steel | 20 | chevron_right |
| Heat treatable alloyed MnCrMo steel | 2 | chevron_right |
| Heat treatable alloyed MnCrPb steel | 2 | chevron_right |
| Heat treatable alloyed MnNiCr steel | 2 | chevron_right |
| Heat treatable alloyed NiCrMo steel | 12 | chevron_right |
| Heat treatable alloyed NiCrMo steel | 7 | chevron_right |
| Heat treatable alloyed SiCr steel | 2 | chevron_right |
| Heat treatable alloyed SiCrMn steel | 3 | chevron_right |
| Heat treatable alloyed SiNiCrMo steel | 2 | chevron_right |
| Heat treatable alloyed steel | 3 | chevron_right |
| Heat treatable alloyed WCrV steel | 1 | chevron_right |
| Heat treatable low alloyed CrNi steel | 2 | chevron_right |
| Heat treatable low alloyed CrNiMnMo steel | 2 | chevron_right |
| Heat treatable low alloyed CrNiMo steel | 2 | chevron_right |
| Heat treatable low alloyed MnNiCrMo steel | 6 | chevron_right |
| Heat treatable low alloyed NiCr steel | 6 | chevron_right |
| Heat treatable low alloyed NiCrMnMo steel | 4 | chevron_right |
| Heat treatable low alloyed NiCrMo steel | 8 | chevron_right |
| Heat treatable low alloyed NiCrPb steel | 2 | chevron_right |
| Heat treatable low alloyed NiMnCrMo steel | 2 | chevron_right |
| Heat treatable low alloyed NiMoCr steel | 8 | chevron_right |
| Heat treatable low alloyed SiCrMo steel | 1 | chevron_right |
| Heat treatable Mn alloyed steel | 2 | chevron_right |
| Heating conductor alloys | 2 | chevron_right |
| Heat-resisting Cr steel | 2 | chevron_right |
| Heat-resisting Cr steel; Rolled and forged products | 4 | chevron_right |
| Heat-resisting CrAl steel | 2 | chevron_right |
| Heat-resisting CrAl steel; Rolled and forged products | 2 | chevron_right |
| Heat-resisting CrMnNiN steel | 2 | chevron_right |
| Heat-resisting CrNi steel | 6 | chevron_right |
| Heat-resisting CrNiAlTi steel | 2 | chevron_right |
| Heat-resisting CrNiMoNb steel | 2 | chevron_right |
| Heat-resisting CrNiNb steel | 4 | chevron_right |
| Heat-resisting CrNiSi steel | 4 | chevron_right |
| Heat-resisting CrNiSiN steel | 1 | chevron_right |
| Heat-resisting CrNiTiZr steel | 2 | chevron_right |
| Heat-resisting CrSi steel | 2 | chevron_right |
| Heat-resisting CrSi steel; Rolled and forged products | 10 | chevron_right |
| Heat-resisting CrSiMoW steel | 2 | chevron_right |
| Heat-resisting MnCrSi steel | 2 | chevron_right |
| Heat-resisting NiCr steel | 2 | chevron_right |
| Heat-resisting NiCrNb steel | 4 | chevron_right |
| Heat-resisting NiCrSi steel | 2 | chevron_right |
| Heat-resisting NiCrTi steel | 2 | chevron_right |
| Heat-resisting steels | 6 | chevron_right |
| Heat-treatable alloyed MnV steel | 4 | chevron_right |
| Heat-treatable carbon steel | 7 | chevron_right |
| High alloyed Co, high-speed steel | 2 | chevron_right |
| High alloyed Co, high-speed steels | 3 | chevron_right |
| High alloyed Cr stainless steel | 7 | chevron_right |
| High alloyed Cr stainless steel; heat treatable steel | 1 | chevron_right |
| High alloyed Cr steel | 9 | chevron_right |
| High alloyed CrAl heat resisting steel | 2 | chevron_right |
| High alloyed CrCo steel | 2 | chevron_right |
| High alloyed CrCoMo heat resisting steel | 1 | chevron_right |
| High alloyed CrCoMo steel | 4 | chevron_right |
| High alloyed CrCoMoV steel | 4 | chevron_right |
| High alloyed CrCoW steel | 2 | chevron_right |
| High alloyed CrCu stainless steel | 2 | chevron_right |
| High alloyed CrMnNi stainless steel | 2 | chevron_right |
| High alloyed CrMnNi steel; non-magnetic | 2 | chevron_right |
| High alloyed CrMnNiMoN steel | 2 | chevron_right |
| High alloyed CrMnNiV steel; non-magnetic | 2 | chevron_right |
| High alloyed CrMo heat resisting steel | 1 | chevron_right |
| High alloyed CrMo stainless heat treatable steel | 4 | chevron_right |
| High alloyed CrMo stainless steel | 6 | chevron_right |
| High alloyed CrMo steel | 6 | chevron_right |
| High alloyed CrMoNb steel | 1 | chevron_right |
| High alloyed CrMoS stainless steel | 2 | chevron_right |
| High alloyed CrMoSiS stainless steel | 2 | chevron_right |
| High alloyed CrMoV stainless steel | 2 | chevron_right |
| High alloyed CrMoV steel | 5 | chevron_right |
| High alloyed CrMoV steel for cutting tool and cold work tool steel | 2 | chevron_right |
| High alloyed CrNi stainless steel | 7 | chevron_right |
| High alloyed CrNi steel | 5 | chevron_right |
| High alloyed CrNi Steel; non-magnetic | 4 | chevron_right |
| High alloyed CrNiCu steel | 2 | chevron_right |
| High alloyed CrNiCuTi steel | 2 | chevron_right |
| High alloyed CrNiMn steel; non-magnetic | 4 | chevron_right |
| High alloyed CrNiMnMo non magnetic steel | 2 | chevron_right |
| High alloyed CrNiMnMoCu steel | 2 | chevron_right |
| High alloyed CrNiMnMoN steel | 6 | chevron_right |
| High alloyed CrNiMo heat resisting steel | 3 | chevron_right |
| High alloyed CrNiMo stainless steel | 8 | chevron_right |
| High alloyed CrNiMo steel; non-magnetic | 2 | chevron_right |
| High alloyed CrNiMoCu stainless steel | 2 | chevron_right |
| High alloyed CrNiMoMn heat resisting steel | 1 | chevron_right |
| High alloyed CrNiMoMn steel; non-magnetic | 2 | chevron_right |
| High alloyed CrNiMoN steel | 4 | chevron_right |
| High alloyed CrNiMoNb steel | 4 | chevron_right |
| High alloyed CrNiMoS steel | 2 | chevron_right |
| High alloyed CrNiNb steel | 2 | chevron_right |
| High alloyed CrNiSi steel | 2 | chevron_right |
| High alloyed CrV steel | 2 | chevron_right |
| High alloyed CrVMo stainless heat treatable steel | 2 | chevron_right |
| High alloyed CrVMo steel | 6 | chevron_right |
| High alloyed CrWMoV steel | 2 | chevron_right |
| High alloyed MnCr non magnetic steel | 2 | chevron_right |
| High alloyed Ni steel | 10 | chevron_right |
| High alloyed NiCoMo steel | 2 | chevron_right |
| High alloyed NiCoTiNb steel | 2 | chevron_right |
| High alloyed NiCr stainless steel | 8 | chevron_right |
| High alloyed NiCr steel | 2 | chevron_right |
| High alloyed NiCrMo heat resisting steel | 1 | chevron_right |
| High alloyed NiCrMo stainless steel | 2 | chevron_right |
| High alloyed NiCrMo steel | 4 | chevron_right |
| High alloyed NiCrMoCu stainless steel | 2 | chevron_right |
| High alloyed NiCrMoCu steel | 1 | chevron_right |
| High alloyed NiCrMoMn heat resisting steel | 1 | chevron_right |
| High alloyed NiCrSi stainless steel | 2 | chevron_right |
| High alloyed NiCrSi steel | 2 | chevron_right |
| High alloyed NiMnCr steel | 2 | chevron_right |
| High alloyed stainless steel | 2 | chevron_right |
| High carbon steel | 63 | chevron_right |
| High carbon steel | 2 | chevron_right |
| High carbon steel with lead | 4 | chevron_right |
| High yield strength steels for cold forming | 1 | chevron_right |
| High yield strength structural steels | 15 | chevron_right |
| High-speed steel | 4 | chevron_right |
| High-speed steels | 22 | chevron_right |
| High-temperature resisting CoCrNiMoW alloy | 2 | chevron_right |
| High-temperature resisting CoCrNiW alloy | 1 | chevron_right |
| High-temperature resisting CoCrNiWMoNb steel | 4 | chevron_right |
| High-temperature resisting CrCoMo steel | 1 | chevron_right |
| High-temperature resisting CrCu steel | 2 | chevron_right |
| High-temperature resisting CrMo steel | 2 | chevron_right |
| High-temperature resisting CrNb steel | 2 | chevron_right |
| High-temperature resisting CrNiCo steel | 2 | chevron_right |
| High-temperature resisting CrNiCu steel | 2 | chevron_right |
| High-temperature resisting CrNiMn steel | 2 | chevron_right |
| High-temperature resisting CrNiMo steel | 3 | chevron_right |
| High-temperature resisting CrNiNb steel | 2 | chevron_right |
| High-temperature resisting CrNiW steel | 3 | chevron_right |
| High-temperature resisting CrTi steel | 4 | chevron_right |
| High-temperature resisting MnCrMoCu steel | 2 | chevron_right |
| High-temperature resisting Ni alloy | 2 | chevron_right |
| High-temperature resisting Ni alloy | 4 | chevron_right |
| High-temperature resisting NiCoCrMo alloy | 1 | chevron_right |
| High-temperature resisting NiCoCrMo alloy | 1 | chevron_right |
| High-temperature resisting NiCoCrMoAl alloy | 1 | chevron_right |
| High-temperature resisting NiCr alloy | 4 | chevron_right |
| High-temperature resisting NiCrAl alloy | 2 | chevron_right |
| High-temperature resisting NiCrCoMo alloy | 2 | chevron_right |
| High-temperature resisting NiCrCoMoTiAl alloy | 3 | chevron_right |
| High-temperature resisting NiCrCoMoTiAl alloy | 1 | chevron_right |
| High-temperature resisting NiCrFe alloy | 1 | chevron_right |
| High-temperature resisting NiCrFeMn alloy | 2 | chevron_right |
| High-temperature resisting NiCrFeMo alloy | 8 | chevron_right |
| High-temperature resisting NiCrFeTi alloy | 1 | chevron_right |
| High-temperature resisting NiCrFeTi alloy | 1 | chevron_right |
| High-temperature resisting NiCrMo alloy | 2 | chevron_right |
| High-temperature resisting NiCrMo alloy | 8 | chevron_right |
| High-temperature resisting NiCrMo steel | 3 | chevron_right |
| High-temperature resisting NiCrMoTiAl alloy | 4 | chevron_right |
| High-temperature resisting NiCrMoW alloy | 4 | chevron_right |
| High-temperature resisting NiFeCrMoTi alloy | 1 | chevron_right |
| High-temperature resisting NiFeCrMoTi alloy | 1 | chevron_right |
| High-temperature resisting NiFeCrW alloy | 2 | chevron_right |
| High-temperature resisting steel | 2 | chevron_right |
| Hot-rolled flat products made of high yield strength steels for cold forming | 6 | chevron_right |
| Low alloy Mn steel | 6 | chevron_right |
| Low alloyed Cr steel | 6 | chevron_right |
| Low alloyed Cr steel for ball and roller bearing | 2 | chevron_right |
| Low alloyed CrMn steel | 5 | chevron_right |
| Low alloyed CuNb steel | 2 | chevron_right |
| Low alloyed CuNi steel | 2 | chevron_right |
| Low alloyed manganese steel | 10 | chevron_right |
| Low alloyed manganese steel, micro-alloyed | 1 | chevron_right |
| Low alloyed Mn steel | 6 | chevron_right |
| Low alloyed Mn steel for quenching and tempering | 6 | chevron_right |
| Low alloyed MnB steel | 11 | chevron_right |
| Low alloyed MnCrNb steel | 1 | chevron_right |
| Low alloyed MnCrTiB steel | 2 | chevron_right |
| Low alloyed MnMo steel | 12 | chevron_right |
| Low alloyed MnMoCrV steel | 2 | chevron_right |
| Low alloyed MnNi steel | 2 | chevron_right |
| Low alloyed MnNiCrMo steel | 2 | chevron_right |
| Low alloyed MnNiMo steel | 2 | chevron_right |
| Low alloyed MnSi steel | 10 | chevron_right |
| Low alloyed MnSiV steel | 2 | chevron_right |
| Low alloyed MnV steel | 8 | chevron_right |
| Low alloyed Mo steel | 1 | chevron_right |
| Low alloyed MoMnSi steel | 2 | chevron_right |
| Low alloyed MoV steel | 4 | chevron_right |
| Low alloyed Ni steel | 8 | chevron_right |
| Low alloyed NiCoMo steel | 4 | chevron_right |
| Low alloyed NiCoMoTi steel | 2 | chevron_right |
| Low alloyed NiCr steel | 11 | chevron_right |
| Low alloyed NiCrMn steel | 4 | chevron_right |
| Low alloyed NiCrMo steel | 3 | chevron_right |
| Low alloyed NiMn steel | 4 | chevron_right |
| Low alloyed NiMnCrMo steel | 2 | chevron_right |
| Low alloyed NiMnMo steel | 6 | chevron_right |
| Low alloyed NiMoMn steel | 2 | chevron_right |
| Low carbon steel | 59 | chevron_right |
| Low carbon steel, micro-alloyed | 4 | chevron_right |
| Low carbon steel; killed | 2 | chevron_right |
| Low carbon unalloyed steels for bolts, nuts and rivets | 2 | chevron_right |
| Low manganese carbon killed steel | 3 | chevron_right |
| Low manganese carbon steel | 3 | chevron_right |
| Low Mn fine grained steel | 3 | chevron_right |
| Martensitic hardenable stainless steel | 2 | chevron_right |
| Martensitic, precipitation hardening, stainless steels | 1 | chevron_right |
| Mechanical properties of weldable fine grain steels | 3 | chevron_right |
| NiCoCr alloy | 2 | chevron_right |
| NiCr alloy | 4 | chevron_right |
| NiCrAl alloy | 4 | chevron_right |
| NiCrAlMo alloy; High-temperature resisting material | 2 | chevron_right |
| NiCrMo alloy | 1 | chevron_right |
| NiCrMo alloy casting | 1 | chevron_right |
| NiCrMo alloy casting | 1 | chevron_right |
| NiCrMo alloy; High-temperature resisting material | 1 | chevron_right |
| NiCrMo alloy; High-temperature resisting material | 2 | chevron_right |
| NiCrMoTi alloy; High-temperature resisting material | 3 | chevron_right |
| NiFeCr alloy | 2 | chevron_right |
| NiFeCrMo alloy; High-temperature resisting material | 1 | chevron_right |
| NiMo alloy casting | 2 | chevron_right |
| NiMoCrFeW alloy | 2 | chevron_right |
| NiMoFe alloy | 1 | chevron_right |
| NiMoFe alloy | 1 | chevron_right |
| Nitriding steels | 2 | chevron_right |
| Non alloy quality steel | 2 | chevron_right |
| Non alloy steel sheet | 2 | chevron_right |
| Non magnetizable steels | 10 | chevron_right |
| Non-alloy carbon steel | 1 | chevron_right |
| Non-alloy low carbon steel; flat products | 14 | chevron_right |
| Normal and Higher Strength Hull Structural Steels | 9 | chevron_right |
| Plates and wide flats made of high yield strength structural steels | 10 | chevron_right |
| Quenched and tempered steel castings for general purposes | 1 | chevron_right |
| Reinforcing steels | 2 | chevron_right |
| Relay iron | 10 | chevron_right |
| SEL 675 SEL 675 (Seamless tubes of high temperature steels; Technical delivery conditions) | 1 | chevron_right |
| SEW 021 SEW 021 (Continuously hot-dip galvanized sheet and strip from the soft steel DX56D for cold forming - Technical delivery conditions) | 2 | chevron_right |
| SEW 028 SEW 028 (Non-alloy and alloy steels with specified properties at moderately elevated and elevated temperatures for pressure vessel purposes; Technical delivery conditions for flat products) | 3 | chevron_right |
| SEW 081 SEW 081 (Mechanical-technological properties of grain-refined structural steels suitable for welding, normalized, according to DIN 17102 in the measurement range of > 150 mm ≤ 250 mm) | 3 | chevron_right |
| SEW 081-1 SEW 081-1 (Mechanical properties of weldable fine grain steels normalized or normalized rolled in greater thicknesses up to 250 mm - Part 1: Fine grain steels in accordance with DIN EN 10113-2 for steel constructions) | 5 | chevron_right |
| SEW 083 SEW 083 (Fine-grained structural steel suitable for welding, thermo-mechanically reshaped; technical conditions of supply for sheet metal, strip and wide flat steel) | 9 | chevron_right |
| SEW 084 SEW 084 (Fine-grained structural steels suitable for welding, thermo-mechanically reshaped. Technical conditions of supply for sectional steel and steel bars with profile-shaped cross-section) | 3 | chevron_right |
| SEW 085 SEW 085 (Weldable fine grain structural steel for highly stressed steel construction. Technical delivery conditions) | 6 | chevron_right |
| SEW 087 SEW 087 (Structural steels with improved atmospheric corrosion resistance; hints for supply, processing and application) | 3 | chevron_right |
| SEW 090-1 SEW 090-1 (High-strength liquid quenched and tempered fine grain steels. Part 1: Technical delivery conditions for flat products.) | 3 | chevron_right |
| SEW 090-2 SEW 090-2 (High strength liquid quenched and tempered fine grain steels. Part 2: Technical delivery conditions for tubes and hollow sections) | 2 | chevron_right |
| SEW 092 SEW 092 (Hot-rolled fine grain steels for cold forming) | 9 | chevron_right |
| SEW 097-2 SEW 097-2 (Hot- and cold-rolled multiphase steel flat products for cold forming - Cold-rolled flat products - Technical delivery conditions) | 3 | chevron_right |
| SEW 101 SEW 101 (Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures (with vanadium allowance)) | 4 | chevron_right |
| SEW 150 SEW 150 (Non alloyed tool steels) | 5 | chevron_right |
| SEW 200 SEW 200 (Alloyed cold work tool steels) | 19 | chevron_right |
| SEW 250 SEW 250 (Hot work tool steels) | 6 | chevron_right |
| SEW 320 SEW 320 (High speed steels) | 8 | chevron_right |
| SEW 350 SEW 350 (Rolling Steel) | 5 | chevron_right |
| SEW 385 SEW 385 (Iron alloys with special thermal extension) | 4 | chevron_right |
| SEW 390 SEW 390 (Non magnetizable steels. Technical delivery conditions) | 2 | chevron_right |
| SEW 395 SEW 395 (Non magnetizable steel casting. Technical delivery conditions) | 1 | chevron_right |
| SEW 400 SEW 400 (Stainless steels for rolled and forged products) | 9 | chevron_right |
| SEW 410 SEW 410 (Corrosion resistant steel casting. Technical conditions of delivery) | 22 | chevron_right |
| SEW 470 SEW 470 (Heat resisting rolled and forged steels) | 9 | chevron_right |
| SEW 510 SEW 510 (Quenched and tempered steel casting for castings with wall thicknesses over 100 mm) | 6 | chevron_right |
| SEW 515 SEW 515 (Quenched and tempered steel casting for castings with wall thicknesses over 100 mm) | 7 | chevron_right |
| SEW 520 SEW 520 (High-strength cast steel with good weldability - Technical delivery conditions) | 8 | chevron_right |
| SEW 595 SEW 595 (Cast steel for crude oil and natural gas installations) | 9 | chevron_right |
| SEW 605 SEW 605 (From hot-working temperatures continuously cooled steels with bainitic microstructure) | 15 | chevron_right |
| SEW 640 SEW 640 (Steels for components in the primary circuit of nuclear power plants) | 3 | chevron_right |
| SEW 670 SEW 670 (High temperature steels; quality regulations) | 2 | chevron_right |
| SEW 680 SEW 680 (Cryogenic steel; Quality specifications) | 4 | chevron_right |
| SEW 685 SEW 685 (Cryogenic steel casting/steel castings having high impact strength at low temperatures - Technical delivery conditions) | 6 | chevron_right |
| SEW 835 SEW 835 (Cast steel for flame and induction hardening - Technical conditions of delivery) | 2 | chevron_right |
| Spring alloyed Si steel; Heat treatable steel | 2 | chevron_right |
| Spring alloyed SiCr steel; Heat treatable steel | 1 | chevron_right |
| Stainless Cr Steel | 2 | chevron_right |
| Stainless steel | 15 | chevron_right |
| Stainless steels - ferritic | 2 | chevron_right |
| Steels for use in rail vehicle construction | 4 | chevron_right |
| Structural steels with improved atmospheric corrosion resistance | 1 | chevron_right |
| Tool carbon steel | 5 | chevron_right |
| Tool steels | 8 | chevron_right |
| Tools alloyed Cr steel | 6 | chevron_right |
| Tools high alloyed Cr steel | 3 | chevron_right |
| Ultra high carbon steel | 4 | chevron_right |
| VDI 2230-1 VDI 2230-1 (Systematic calculation of highly stressed bolted joints - Joints with one cylindrical bolt) | 21 | chevron_right |
| VDI 3388 VDI 3388 (Materials for trimming and forming dies) | 14 | chevron_right |
| WB 240 WB 240 (Wrought aluminum alloys AIMgSi F40, WN 3.2315) | 1 | chevron_right |
| WB 252 WB 252 (Cast steel GS-24, CrNiMo 3 2 5, WN 1.6552) | 1 | chevron_right |
| WB 277/1 WB 277/1 (Cryogenic austenitic rolled and forged steel, 5 X 18 9 CrMnNiN, material WN 1.6909) | 1 | chevron_right |
| WB 277/2 WB 277/2 (Cryogenic austenitic rolled and forged steel, X 5 CrMnNiN 18 9 wk, material WN 1.6909) | 1 | chevron_right |
| WB 364 WB 364 (Carbon steel, C 22.3, WN 1.0427; Bar, forging, flange, ring) | 1 | chevron_right |
| WB 367 WB 367 (Austenitic spheroidal graphite cast, GGG-NiMn 23 3, WN 0.7673) | 1 | chevron_right |
| WB 368 WB 368 (Austenitic spheroidal graphite cast, GGG-NiCr 20 2, WN 0.7660) | 1 | chevron_right |
| WB 371 WB 371 (Cryogenic austenitic rolled and forged steel, X 3 CrNIN 18 10, WN 1.6907) | 1 | chevron_right |
| WB 372 WB 372 (Cryogenic austenitic rolled and forged steel, X 3 CrNiMoN 18 14, WN. 1.6967) | 1 | chevron_right |
| WB 376 WB 376 (Weldability, heat resistant steel, 17 MnMoV 6-4 (WB 35), WN 1.5403) | 1 | chevron_right |
| WB 381 WB 381 (Heat-resistant tempered cast steel GS-18 NiMoCr 3 7, material No. 1.6761) | 1 | chevron_right |
| WB 384 WB 384 (Weldable heat resistant steel 13 MnNiMo 5-4 (WB 34); Material No.1.8807) | 1 | chevron_right |
| WB 388 WB 388 (Temperature Chewy fine grained, 11 MnNi 5 3, 12 MnNi 6 3 and 13 MnNi 6 3, material No. 1.6212, 1.6213, 1.6217) | 1 | chevron_right |
| WB 406 WB 406 (Weathering fine grain structural steel COR-TEN A, WN 1.8962) | 1 | chevron_right |
| WB 406 WB 406 (Weathering fine grain structural steel PATINAX 355 P, WN 1.8946) | 1 | chevron_right |
| WB 414 WB 414 (Wrought aluminum alloy AlMgSi 1, WN 3.2315) | 1 | chevron_right |
| WB 423 WB 423 (Wrought aluminum alloy AlMgSi1 F28, F31 material no. 3.2315) | 1 | chevron_right |
| WB 427/1 WB 427/1 (Fine-grain structural steel 15 MnNi 6 3 Material no. 1.6210) | 1 | chevron_right |
| WB 427/2 WB 427/2 (Fine grain structural steel 15 MnNi 6 3. Material no. 1.6210) | 1 | chevron_right |
| WB 427/3 WB 427/3 (Fine grain structural steel; 15 MnNi 6 3 Material no. 1.6210. Forged piece as a seamless hollow body for nozzles, shell sections and flanges, as well as forged piece as a solid part) | 1 | chevron_right |
| WB 436 WB 436 (Highly corrosion-resistant alloy NiMo 28, material no. 2.4617; Strip, sheet, forging, bar) | 1 | chevron_right |
| WB 450 WB 450 (Heavy metal casting G-CuZn 35 Al 1) | 1 | chevron_right |
| WB 451 WB 451 (Austenitic steel forged, X6CrNiTi18-10 S, material No.1.4533, X6CrNiNb18-10 S, material No. 1.4553, X6CrNiMoTi 17-12-2 S, material No.1.4579) | 3 | chevron_right |
| WB 453 WB 453 (Carbon forged steel C 22.8 S1; Material No 1.1338, bars, forgings) | 1 | chevron_right |
| WB 459/2 WB 459/2 (Weldable heat resistant steel, 15 NiCuMoNb 5 S 1 (WB 36 S 1), material No. 1.6369) | 1 | chevron_right |
| WB 459/3 WB 459/3 (Weldable heat resistant steel, 15 NiCuMoNb 5 S 1, material No. 1.6369) | 1 | chevron_right |
| WB 460/1 WB 460/1 (Fine grained steel,16 MnNi 6 3, material No.1.6211) | 1 | chevron_right |
| WB 467 WB 467 (Austenitic rolled and forged steel, X 3 NiCrCuMoTi 27 23, material No. 1.4503) | 1 | chevron_right |
| WB 486 WB 486 (Austenitic rolled and forged steel, X 1 CrNiMoN 25 25 2, material No.1.4465) | 1 | chevron_right |
| WB 497 WB 497 (Heat resisting rolled and forged steel, X 5 NiCrCeNb 32-27, material No.1.4877) | 1 | chevron_right |
| WB 500 WB 500 (Heat-resistant cast steel, CS -17 CrMnMo 55, material No.1.7355) | 1 | chevron_right |
| WB 506 WB 506 (Heat resistant steel, 15 CrMoV 5 10, WN 1.7745) | 1 | chevron_right |
| WB 515 WB 515 (High corrosion resistant steel, NiCr 21 Mo 16 W, WN 2.4606) | 1 | chevron_right |
| WB 516 WB 516 (High chromium alloyed steel, X1CrNiMoCuN33-32-1, WN 1.4591; Sheet, section, bar, forging) | 1 | chevron_right |
| WB 519 WB 519 (High chromium - containing nickel - chromium- iron alloy, NiCr 28 FeSiCe, material No.2.4889) | 1 | chevron_right |
| WB 536 WB 536 (Tube special quality PSX 80 - L555MB) | 1 | chevron_right |
| WB 539 WB 539 (High corrosion resistant steel, NiCr23Mo16Cu, WN 2.4675; Strip, sheet, forgings, rod) | 1 | chevron_right |
| WB 540 WB 540 (High-carbon nickel-chromium-iron alloy NiCr25FeAIY, material No. 2.4633; sheet, forgings, section, bar) | 1 | chevron_right |
| WB 541 WB 541 (Seamless composite pipes made of ferritic and austenitic steels) | 1 | chevron_right |
| WB 546 WB 546 (Heat resistant rolled and forged steel X6CrNiNbN25-20 Material-No. 1.4952; Seamless tube) | 1 | chevron_right |
| WB 586 WB 586 (Highly corrosion resistant Nickel-base alloy NiCr21Mo20N, Material-No. 2.4700; Sheet and strip) | 1 | chevron_right |
| WB307 WB307 (Non-magnetic, austenitic stainless steel, special, X 4 CrNiMoN 23 15, WN 1.3951) | 1 | chevron_right |
| WB327 WB327 (Wrought aluminum alloy AIMgSi1 for pressurized gas container, WN 3.2318) | 1 | chevron_right |
| WB400 WB400 (Highly corrosion resistant alloy NiMo16Cr15W; Material number 2.4819; Sheet, strip, forging, rod, tube, ring) | 1 | chevron_right |
| WB424 WB424 (High corrosion-resistant alloy NiMo16Cr16Ti; Material No. 2.4610, strip, sheet, forging, rod, seamless tube) | 1 | chevron_right |
| WB532 WB532 (Tube special quality PSX 75, material No.1.8968) | 1 | chevron_right |
| Wear ressisting high alloyed Mn steel | 4 | chevron_right |
| Wear ressisting low Mn steel | 2 | chevron_right |
| Weldable fine grain structural steel | 10 | chevron_right |
| Weldable fine grained steels | 10 | chevron_right |
| Weldable high strength low alloyed MnCr steel | 20 | chevron_right |
| Weldable high strength low alloyed MnCrNi steel | 4 | chevron_right |
| Weldable high strength low alloyed MnCrSiVMo steel | 2 | chevron_right |
| Weldable high strength low alloyed MnSiCrMo steel | 2 | chevron_right |
| Weldable high strength low alloyed MnTi steel | 2 | chevron_right |
| Weldable high strength low alloyed NiCrMnMo steel | 6 | chevron_right |
| Weldable high strength low alloyed steel | 3 | chevron_right |
| Weldable high strength structural steel | 2 | chevron_right |
| Weldable low alloyed MnCrSiMo steel | 2 | chevron_right |
| Weldable low alloyed steel | 3 | chevron_right |
| Wrought low alloyed NiCrMn alloy | 2 | chevron_right |
| Wrought low alloyed NiCrMn alloy | 2 | chevron_right |
| Wrought low alloyed NiMn alloy | 2 | chevron_right |
| Wrought low alloyed NiMnSi alloy | 4 | chevron_right |
| Wrought low alloyed NiW alloy | 1 | chevron_right |
| Wrought low alloyed NiW alloy | 1 | chevron_right |
| Wrought NiCrMn alloy | 2 | chevron_right |
| Wrought NiMn alloy | 1 | chevron_right |