AFNOR NF
Standard · France · 1202 references
| Standard number | Materials | |
|---|---|---|
| Austenitic stainless steel | 4 | chevron_right |
| Carburizing alloy | 11 | chevron_right |
| Chromium molybdenum steel | 2 | chevron_right |
| Chromium steel | 4 | chevron_right |
| FD A 35-555 FD A 35-555 (Iron and steel. Structural steel bars delivered in the tempered condition) | 6 | chevron_right |
| FD A 35-570 FD A 35-570 (French stainless steels grades not retained in EN 10088 parts 2 and 3) | 41 | chevron_right |
| FD A65-700 FD A65-700 (Magnesium and its alloys. Characteristics, use, applications.) | 34 | chevron_right |
| High strength alloy steels | 10 | chevron_right |
| Low-carbon steel and HSLA steel | 3 | chevron_right |
| Martensitic stainless steel | 1 | chevron_right |
| Medium-carbon steel | 8 | chevron_right |
| Miscellaneous or unclassified high-alloy steel | 4 | chevron_right |
| Mold steel and special-purpose tool steel | 1 | chevron_right |
| NF 35-080-1 NF 35-080-1 (Reinforcing steel - Weldable steel - Part 1: Bars and coils) | 5 | chevron_right |
| NF A 32-051 NF A 32-051 (Foundry products. Cast steel grades for general purpose) | 8 | chevron_right |
| NF A 32-052 NF A 32-052 (Steel castings - Magnetic steel casting grades) | 10 | chevron_right |
| NF A 32-053 NF A 32-053 (Foundry products - Cast steels for low temperatures purposes) | 11 | chevron_right |
| NF A 32-054 NF A 32-054 (Foundry products - Cast steels for general purpose in mechanical engineering) | 33 | chevron_right |
| NF A 32-055 NF A 32-055 (Foundry products. Weldable cast steels for pressure vessels) | 37 | chevron_right |
| NF A 32-056 NF A 32-056 (Foundry products. Austenitic and austeno-ferritic stainless cast steel) | 10 | chevron_right |
| NF A 32-057 NF A 32-057 (Heat resistant steel castings) | 13 | chevron_right |
| NF A 32-058 NF A 32-058 (Foundry products - Abrasion resistant cast steels) | 56 | chevron_right |
| NF A 32-059 NF A 32-059 (Foundry products. Martensitic stainless cast steel) | 8 | chevron_right |
| NF A 32-060 NF A 32-060 (Foundry products - Cast steel and nickel alloy castings for pumps, valves and fittings (enclosures and internal components)) | 204 | chevron_right |
| NF A 32-101 NF A 32-101 (Founding. Grey cast irons) | 5 | chevron_right |
| NF A 32-160 NF A 32-160 (Foundry products. Cast iron for low temperatures purposes) | 10 | chevron_right |
| NF A 32-201 NF A 32-201 (Founding - Spheroidal graphite cast iron) | 9 | chevron_right |
| NF A 32-211 NF A 32-211 (Foundry products. Spheroidal graphite cast iron for fittings and pressure vessels) | 10 | chevron_right |
| NF A 32-301 NF A 32-301 (Founding - Austenitic cast irons) | 23 | chevron_right |
| NF A 32-401 NF A 32-401 (Foundry products - Alloy and unalloyed white cast iron castings) | 9 | chevron_right |
| NF A 32-701 NF A 32-701 (Foundry products. Whitehearth malleable cast iron) | 3 | chevron_right |
| NF A 32-702 NF A 32-702 (Foundry products. Malleable iron casting with nodular ferritic or perlitic graphite) | 6 | chevron_right |
| NF A 33-101 NF A 33-101 (Iron and steel. Carbon steels. Types for forging and heat treatment. Semi-finished products, bars and wire-rods) | 12 | chevron_right |
| NF A 33-102 NF A 33-102 (Steel products. General purpose non-alloy steel semi-finished products for rerolling) | 7 | chevron_right |
| NF A 33-111 NF A 33-111 (Dispersoid steels for hot forging. Semi-finished products and bars) | 20 | chevron_right |
| NF A 35-014 NF A 35-014 (Reinforcing steels - Plain, indented or ribbed stainless steel bars and coils) | 42 | chevron_right |
| NF A 35-015 NF A 35-015 (Reinforcing steel - Weldable smooth steel - Bars and coils) | 3 | chevron_right |
| NF A 35-016 NF A 35-016 (Concrete reinforcing bars. Bars and wire with improved adherence) | 1 | chevron_right |
| NF A 35-017 NF A 35-017 (Steel for concrete reinforcement - Non-weldable ribbed bars and coils) | 1 | chevron_right |
| NF A 35-019-1 NF A 35-019-1 (Reinforcing steels - Weldable intended steel of technical class B500A - Part 1: bars and coils) | 1 | chevron_right |
| NF A 35-019-2 NF A 35-019-2 (Reinforcing steels . Weldable indented steel of technical class B500A . Part 2: welded fabric) | 1 | chevron_right |
| NF A 35-028 NF A 35-028 (Reinforcing steel - Lattice girders) | 6 | chevron_right |
| NF A 35-030 NF A 35-030 (Steel products - High-bond non-weldable ribbed steel bars for concrete poles, supports for over head lines) | 1 | chevron_right |
| NF A 35-049 NF A 35-049 (Iron and steel. General purpose steel. Bars and wire-rod for drawing. Grades and types) | 6 | chevron_right |
| NF A 35-051 NF A 35-051 (Iron and steel. Non-alloy steel wire rod for wire drawing and cold rolling. Grades) | 31 | chevron_right |
| NF A 35-052 NF A 35-052 (Iron and steel - Plain steel wire rod for transformation in steel for the reinforcement of concrete) | 2 | chevron_right |
| NF A 35-053 NF A 35-053 (Iron and steel. Non-alloy steel wire rod for products made by hot or cold forming. Types) | 17 | chevron_right |
| NF A 35-054 NF A 35-054 (Iron and steel products - Non-alloy steel wire rod for prestressing reinforcement work - Types) | 9 | chevron_right |
| NF A 35-055 NF A 35-055 (Iron and steel. Wire rod in non-alloy steel for coated electrodes. Grades and types) | 2 | chevron_right |
| NF A 35-056 NF A 35-056 (Iron and steel products - Carbon steel and alloy steel wire rod for coiled electrodes for gas-shielded arc welding and submerged-arc welding) | 14 | chevron_right |
| NF A 35-057 NF A 35-057 (Iron and steel. Wire rods made of unalloyed steel for the manufacture of high resisting cold-formed spring wires. Types) | 10 | chevron_right |
| NF A 35-500 NF A 35-500 (Iron and steel. Steel types E24, E28, E36 for use in metallic construction) | 31 | chevron_right |
| NF A 35-501 NF A 35-501 (Structural steels - Grades and types - Sheets, medium and heavy plates, universal plates, bars and sections) | 15 | chevron_right |
| NF A 35-502 NF A 35-502 (Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions) | 7 | chevron_right |
| NF A 35-551 NF A 35-551 (Case hardening steels - Technical delivery conditions) | 55 | chevron_right |
| NF A 35-552 NF A 35-552 (Iron and steel - Special purpose unalloyed and alloyed structural steels for heat treatment - Grades - Semi-products, bars and wire rods) | 43 | chevron_right |
| NF A 35-556 NF A 35-556 (Iron and steel. Heat treatable steels for externally threaded fasteners for structural purposes) | 15 | chevron_right |
| NF A 35-557 NF A 35-557 (Iron and steel. Heat treatable steels for externally threaded, high performance fasteners for engineering purposes) | 19 | chevron_right |
| NF A 35-558 NF A 35-558 (Iron and steel. Heat treatable steels for externally threaded high performance fasteners for use at high temperatures) | 13 | chevron_right |
| NF A 35-559 NF A 35-559 (Iron and steel. Heat treatable special steels and stainless steels for externally threaded fasteners for use at low temperatures) | 5 | chevron_right |
| NF A 35-561 NF A 35-561 (Iron and steel. Free machining steel bar and wire rod for general purposes. Technical delivery conditions) | 11 | chevron_right |
| NF A 35-562 NF A 35-562 (Iron and steel. Heat treated free-cutting special steel. Bars and wire rods drawing. Types) | 6 | chevron_right |
| NF A 35-564 NF A 35-564 (Iron and steel products. Special steels bars and wire rod for cold forming) | 36 | chevron_right |
| NF A 35-565 NF A 35-565 (Iron and steel. Bearing steels. Types) | 42 | chevron_right |
| NF A 35-566 NF A 35-566 (Iron and steel products. Chain steels. Grades and types) | 16 | chevron_right |
| NF A 35-567 NF A 35-567 (Iron and steel. Case hardened alloy steels for solid highly- stressed mechanical parts. Grades. Semi-finished products and bars) | 2 | chevron_right |
| NF A 35-571 NF A 35-571 (Iron and steel. Special structural steels suitable for the manufacture of suspension components) | 40 | chevron_right |
| NF A 35-572 NF A 35-572 (Iron and steel. Stainless steel for general purposes. Grades) | 23 | chevron_right |
| NF A 35-573 NF A 35-573 (Stainless steels for general purposes - Plates, wide strips and strips) | 84 | chevron_right |
| NF A 35-574 NF A 35-574 (Iron and steel. Stainless steel for general purposes. Semi - finished products, bars and wire rod) | 52 | chevron_right |
| NF A 35-575 NF A 35-575 (Iron and Steel. Stainless Steel for general purposes. Grades. III - Wire rod) | 20 | chevron_right |
| NF A 35-577 NF A 35-577 (Iron and steel - Stainless steel wire rods for cold forming) | 13 | chevron_right |
| NF A 35-578 NF A 35-578 (Iron and steel - Stainless steel for high temperature application) | 31 | chevron_right |
| NF A 35-579 NF A 35-579 (Valve steels and alloys for internal combustion engines) | 19 | chevron_right |
| NF A 35-582 NF A 35-582 (Austenitic stainless steels with nitrogen addition) | 3 | chevron_right |
| NF A 35-583 NF A 35-583 (Iron and steel. Stainless steel. Stainless steel wire rods for the preparation of filler material for welding or sprayer metal coating) | 31 | chevron_right |
| NF A 35-586 NF A 35-586 (Coding of french standardized stainless steels) | 97 | chevron_right |
| NF A 35-590 NF A 35-590 (Iron and steel - Tool steels) | 178 | chevron_right |
| NF A 35-595 NF A 35-595 (Steel products - Stainless steels for cutlery) | 42 | chevron_right |
| NF A 35-596 NF A 35-596 (Iron and steel. Carbon steels for cutlery) | 5 | chevron_right |
| NF A 36-102 NF A 36-102 (Iron and steel. Continuously hot-rolled strip of non-alloy and alloy steels for cold re-rolling. Technical delivery conditions) | 63 | chevron_right |
| NF A 36-201 NF A 36-201 (High yield strength steel plates for welded structures. Grades and types) | 3 | chevron_right |
| NF A 36-204 NF A 36-204 (Iron and steel products. High yield strength steel plates for delivery in the treated condition for welded constructions. Grades and types) | 20 | chevron_right |
| NF A 36-206 NF A 36-206 (Iron and steel. Mo, Mn-Mo and Cr-Mo alloy steel plate for boilers and pressure vessels. Grades and types) | 8 | chevron_right |
| NF A 36-207 NF A 36-207 (High yield strength steel plates for pressure vessels. Grades and types) | 8 | chevron_right |
| NF A 36-208 NF A 36-208 (Iron and steel. Nickel alloy steel plates for low temperature boilers and pressure vessels) | 9 | chevron_right |
| NF A 36-209 NF A 36-209 (Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels) | 45 | chevron_right |
| NF A 36-210 NF A 36-210 (Iron and steel - Steel plate for boilers and pressure vessels - High yield strength heat treated alloy steels - Grades and types) | 5 | chevron_right |
| NF A 36-211 NF A 36-211 (Steel sheet and strip for welded gas cylinders) | 4 | chevron_right |
| NF A 36-212 NF A 36-212 (Iron and steel - Steel plates for the manufacture of offshore platform and structural elements - Grades and types) | 10 | chevron_right |
| NF A 36-215 NF A 36-215 (Steel products. Fine grain weldable steels for the transportation of dangerous products. Technical delivery conditions) | 16 | chevron_right |
| NF A 36-231 NF A 36-231 (Iron and steel products. High yield strength weldable microalloy steel hot rolled flat products for cold forming. Grades and types) | 13 | chevron_right |
| NF A 36-232 NF A 36-232 (Iron and steel products - High yield strength weldable microalloy steel cold rolled flat products for cold forming - Grades and types) | 5 | chevron_right |
| NF A 36-301 NF A 36-301 (Continuously hot-rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions) | 3 | chevron_right |
| NF A 36-601 NF A 36-601 (Welded steel forgings for boilers and pressure vessels. Carbon and carbon manganese steels. Grades and types) | 4 | chevron_right |
| NF A 36-602 NF A 36-602 (Weldable steel forgings for boilers and pressure vessels. Mo, Mn-Mo and Cr-Mo alloy steels. Grades and types) | 8 | chevron_right |
| NF A 36-603 NF A 36-603 (Weldable steel forgings for boilers and pressure vessels. High yield strength alloy steels. Grades and types) | 5 | chevron_right |
| NF A 36-606 NF A 36-606 (Weldable steel drop forged articles for boilers and pressure vessels. Mo, Mn/Mo and Cr/Mo alloy steels. Grades and types) | 7 | chevron_right |
| NF A 36-607 NF A 36-607 (Austenitic stainless steel parts obtained by flat die forging or drop forging for boilers and pressure vessels. Grade and types) | 10 | chevron_right |
| NF A 36-612 NF A 36-612 (Structural forgings. Non-alloyed steels) | 6 | chevron_right |
| NF A 36-613 NF A 36-613 (General purpose forgings. Stainless steels) | 15 | chevron_right |
| NF A 37-401 NF A 37-401 (Cold formed steel product. Drawn bars and peeled-roller polished round bars. Mechanical properties) | 24 | chevron_right |
| NF A 37-501 NF A 37-501 (Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions) | 4 | chevron_right |
| NF A 37-502 NF A 37-502 (Non-alloy carbon (C superior to 0, 25 per cent) steel cold- rolled strip for heat treatment. Qualities) | 17 | chevron_right |
| NF A 37-503 NF A 37-503 (Cold-rolled strip. Special alloy and non-alloy steels for carburizing. Grades) | 11 | chevron_right |
| NF A 37-504 NF A 37-504 (Cold-rolled strip - Special alloy steels for heat treatment - Grades) | 16 | chevron_right |
| NF A 49-117 NF A 49-117 (Steel tubes. Seamless plain end tubes for pipe-lines and other uses. Ferritic and austenitic stainless steels. Dimensions. Technical delivery conditions) | 10 | chevron_right |
| NF A 49-142 NF A 49-142 (Steel tubes. Longitudinally pressure welded plain ended and hot finished tubes. Diameters from 13, 5 to 168, 3 mm with specified room temperature properties and with special delivery conditions. Dimensions. Technical delivery conditions) | 8 | chevron_right |
| NF A 49-207 NF A 49-207 (Steel tubes. Seamless or longitudinally welded stainless steel tubes for exchangers in aircraft construction. Dimensions. Technical delivery conditions) | 2 | chevron_right |
| NF A 49-211 NF A 49-211 (Steel tubes. Seamless plain-end unalloyed steel tubes for fluid piping at elevated temperatures. Dimensions. Technical delivery conditions) | 3 | chevron_right |
| NF A 49-213 NF A 49-213 (Steel tubes. Seamless unalloyed and Mo and Cr-Mo alloyed steel tubes for use at high temperatures. Dimensions (with normal tolerances). Technical delivrery conditions) | 15 | chevron_right |
| NF A 49-214 NF A 49-214 (Steel tubes. Seamless austenitic steel tubes for use at high temperatures. Dimensions (with normal tolerances). Technical conditions of delivery) | 7 | chevron_right |
| NF A 49-215 NF A 49-215 (Steel tubes. Seamless tubes for ferritic non alloy and alloy steel heat exchangers. Dimensions. Technical delivery conditions) | 14 | chevron_right |
| NF A 49-217 NF A 49-217 (Steel tubes. Seamless tubes for heat exchangers. Stainless ferritic, austenic or ferritoaustenitic steel grades. Dimensions. Technical delivery conditions) | 21 | chevron_right |
| NF A 49-218 NF A 49-218 (Steel pipes. Seamless pipes for furnaces. Austenitic stainless steels. Dimensions (with normal or reduced tolerances). Technical delivery conditions) | 6 | chevron_right |
| NF A 49-219 NF A 49-219 (Steel tubes - Non-alloy and Mo and Cr-Mo-alloy steel seamless tubes for furnaces - Dimensions, technical delivery conditions) | 9 | chevron_right |
| NF A 49-220 NF A 49-220 (Steel tubes. Grooved seamless steel tubes for use at high temperature. Dimensions. Technical delivery conditions) | 9 | chevron_right |
| NF A 49-230 NF A 49-230 (Steel tubes. Plain end seamless tubes for pressure vessels and piping systems used at low temperatures. Dimensions. Technical delivery conditions) | 5 | chevron_right |
| NF A 49-240 NF A 49-240 (Steel tube longitudinally buttwelding plain end for pressure vessels and pipe systems used at low temperatures. Dimensions. Technical conditions of delivery) | 3 | chevron_right |
| NF A 49-241 NF A 49-241 (Steel tubes longitudinally pressure welded tubes in non alloyed steel grades for fluid piping up to 425 degrees Celsius. Diameters from 21, 3 mm to 168, 3 mm. Dimensions. Technical delivery conditions) | 8 | chevron_right |
| NF A 49-242 NF A 49-242 (Steel tubes. Longitudinally pressure welded tubes D inferior or equal to 168, 3 mm in non alloyed and low alloyed steels used at medium elevated temperatures. Dimensions. Technical delivery conditions) | 4 | chevron_right |
| NF A 49-243 NF A 49-243 (Steel tubes. Longitudinally pressure welded tubes D inferior or equal to 168, 3 mm in non alloyed and ferritic alloyed steels, used at elevated temperatures. Dimensions. Technical delivery conditions) | 6 | chevron_right |
| NF A 49-244 NF A 49-244 (Steel tubes - Welded austenitic stainless and austenitic ferritic steel rolled tubes for pressure service - Dimensions, technical conditions for delivery) | 54 | chevron_right |
| NF A 49-245 NF A 49-245 (Steel tubes. Longitudinally pressure welded tubes from non alloy and ferritic alloy steels for heat exchangers in diameters from 15, 9 mm and 76, 1 mm inclusive. Dimensions. Technical delivery conditions) | 17 | chevron_right |
| NF A 49-247 NF A 49-247 (Steel tubes. Tubes welded longitudinally for heat exchangers. Austenitic stainless steels. Dimensions. Technical delivery conditions) | 6 | chevron_right |
| NF A 49-249 NF A 49-249 (Steel tubes. Longitudinally welded plain end tubes for the food industry. Austenitic stainless steels. Dimensions. Technical delivery conditions) | 4 | chevron_right |
| NF A 49-252 NF A 49-252 (Steel tubes. Welded non alloy steel tubes of diameters 168, 3 mm to 1220 mm used at averagely elevated temperatures. Dimensions. Technical delivery conditions) | 4 | chevron_right |
| NF A 49-253 NF A 49-253 (Steel tubes. Longitudinally fusion welded non alloy steel and ferritic alloy steel tubes for use at elevated temperatures. Dimensions. Technical delivery conditions) | 8 | chevron_right |
| NF A 49-281 NF A 49-281 (Steel tubes, tubular accessories, bends, tee, reduction for welding made from seamless tube with quality specifications. Dimensions. Technical delivery conditions) | 3 | chevron_right |
| NF A 49-310 NF A 49-310 (Steel tubes. Seamless precision tubes for mechanical application. Dimensions. Technical delivery conditions) | 9 | chevron_right |
| NF A 49-311 NF A 49-311 (Steel tubes. Seamless tubes for mechanical application. Dimensions. Technical delivery conditions) | 4 | chevron_right |
| NF A 49-312 NF A 49-312 (Steel tubes. Seamless steel tubes with improved machinability for mechanical machined parts) | 3 | chevron_right |
| NF A 49-317 NF A 49-317 (Steel tubes. Seamless plain end tubes for engineering use. Austenitic stainless steels. Dimensions. Technical delivery conditions) | 2 | chevron_right |
| NF A 49-341 NF A 49-341 (Steel tubes. Precision welded tubes for mechanical application. Dimensions. Technical delivery conditions) | 6 | chevron_right |
| NF A 49-343 NF A 49-343 (Steel tubes. Longitudinally welded D inferior or equal to 168, 3 mm for engineering use. Dimensions. Technical delivery conditions) | 4 | chevron_right |
| NF A 49-400 NF A 49-400 (Steel tubes. Longitudinally electric resistance welded unalloyed steel tubes 17, 2 inferior or equal to D inferior or equal to 406, 4 mm for the transport of pressurized fluids. Dimensions. Technical delivery conditions) | 16 | chevron_right |
| NF A 49-401 NF A 49-401 (Steel tubes. Longitudinally fusion welded non-alloy and micro- alloy steel tubes for fluid transporting pipes and pressure vessels. Dimensions. Technical conditions for delivery) | 8 | chevron_right |
| NF A 49-402 NF A 49-402 (Steel tubes. Spiral fusion welded non-alloy and micro-alloy steel tubes for fluid transporting pipes and pressure vessels. Dimensions. Technical conditions of delivery) | 8 | chevron_right |
| NF A 49-411 NF A 49-411 (Steel tubes. Seamless high performance tubes, 60, 3 mm < D < 406, 4 mm of unalloyed steels for butt-welding pressurized fluid transport pipelines. Dimensions. Technical conditions of delivery) | 6 | chevron_right |
| NF A 49-501 NF A 49-501 (Steel tubes. Seamless or welded hot finished structural hollow sections. Dimensions) | 24 | chevron_right |
| NF A 49-643 NF A 49-643 (Steel tubes. Round, square and rectangular steel tubes for ordinary uses, longitudinally pressure welded and cold formed from flat products. Dimensions. Technical delivery conditions) | 9 | chevron_right |
| NF A 49-645 NF A 49-645 (Steel tubes. Round, square and rectangular steel tubes for ordinary uses, longitudinally pressure welded and cold formed from cold-rolled flat products. Dimensions. Technical delivery conditions) | 5 | chevron_right |
| NF A 49-646 NF A 49-646 (Steel tubes. Round, square and rectangular precision steel tubes longitudinally induction welded from hot or cold-rolled flat products, coated or not coated. Dimensions. Technical delivery conditions) | 10 | chevron_right |
| NF A 49-647 NF A 49-647 (Steel tubes. Structural welded tubes, circular, square, rectangular or oval, in ferritic or austenitic stainless steels. Dimensions. Technical delivery conditions) | 5 | chevron_right |
| NF A 49-900 NF A 49-900 (Pressure vessels. Seamless steel gas vessels. Types of steels. Semi finished products) | 8 | chevron_right |
| NF A 50-452 NF A 50-452 (Aluminium and aluminium alloys. Prelacquered sheet or strip. Characteristics) | 17 | chevron_right |
| NF A 51-050 NF A 51-050 (Copper and alloys. Classification of coppers) | 6 | chevron_right |
| NF A 51-100 NF A 51-100 (Semi-finished products of copper and copper alloys. Rolled copper products for general purposes. Characteristics.) | 5 | chevron_right |
| NF A 51-102 NF A 51-102 (Semi-finished products of copper and copper alloys. Round copper alloy tubes for heat exchangers.) | 9 | chevron_right |
| NF A 51-104 NF A 51-104 (Semi-finished products made of copper and copper alloys. Bars, wires and sections made of brasses. Characteristics.) | 7 | chevron_right |
| NF A 51-106 NF A 51-106 (Semifinished products made of copper and copper alloys. Bars, wires and profiles of high tensile brasses.) | 2 | chevron_right |
| NF A 51-108 NF A 51-108 (Semifinished products made of copper and copper alloys. Bronze rolled products.) | 6 | chevron_right |
| NF A 51-114 NF A 51-114 (Semi-finished products of copper and copper alloys. Bars and wires made of copper-beryllium. Characteristics.) | 3 | chevron_right |
| NF A 51-116 NF A 51-116 (Semi-finished copper and copper alloy products. Wrouhgt copper-aluminium products obtained by extrusion or forging. Requirements and acceptance conditions.) | 10 | chevron_right |
| NF A 51-118-1 NF A 51-118-1 (Semi-finished copper products. Copper bars and wires obtained by cold drawing, wire drawing or rolling. Part 1 : Requirements and acceptance conditions.) | 4 | chevron_right |
| NF A 51-124 NF A 51-124 (Half products in copper and copper alloys. Round seamless copper tubes for general purposes.) | 4 | chevron_right |
| NF A 53-709 NF A 53-709 (Foundry products. Copper-aluminium castings. Properties.) | 5 | chevron_right |
| NF A 54-301 NF A 54-301 (Nickel and nickel alloys. Iron-nickel alloys with particular dilatability) | 11 | chevron_right |
| NF A 55-010 NF A 55-010 (Foundry products. Zinc alloy pressure die castings.) | 2 | chevron_right |
| NF A 55-401 NF A 55-401 (Non ferrous metals. Cold rolled semi-finished products made of lead. Characteristics.) | 5 | chevron_right |
| NF A 57-702 NF A 57-702 (Permanent mould castings and sand castings of aluminium, aluminium alloys. Properties.) | 40 | chevron_right |
| NF A 57-703 NF A 57-703 (Foundry products. Pressure die castings of aluminium and aluminium alloys. Properties.) | 13 | chevron_right |
| NF A 81-313 NF A 81-313 (Welding consumables - Wires electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification) | 46 | chevron_right |
| NF A 81-316 NF A 81-316 (Welding consumables - Solid wires, solid wire-flux and tubular cored electrode- flux combinations for submerged arc welding of non alloy and fine grain steels - Classification) | 17 | chevron_right |
| NF A 81-317 NF A 81-317 (Welding consumable - Wire electrodes, wires and rods for arc welding of creep- resisting steels - Classification) | 10 | chevron_right |
| NF A 81-318 NF A 81-318 (Solid bare electrode wires for submerged arc welding, depositing a stainless and/or heat-resisting steel. Symbolization. Specifications) | 14 | chevron_right |
| NF A 81-324 NF A 81-324 (Combinations of bare solid-metal electrode wires and power fluxes for electric arc welding, depositing a stainless and/or refractory steel. Symbolization. Requirements. Tests) | 14 | chevron_right |
| NF A 81-343 NF A 81-343 (Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat resisting steels. Classification) | 24 | chevron_right |
| NF A 81-347 NF A 81-347 (Manual metal arc welding electrodes depositing a metal for use at low temperatures. Symbolization. Fillers materials) | 11 | chevron_right |
| NF A 81-354 NF A 81-354 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification) | 72 | chevron_right |
| NF A 81-356 NF A 81-356 (Arc welding. Bare flux-cored wires depositing a low-temperature steel weld- metal. Symbolization. Requirements. Acceptance) | 57 | chevron_right |
| NF A 81-358 NF A 81-358 (Wedlding consumables - Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels - Classification) | 18 | chevron_right |
| NF A 81-381 NF A 81-381 (Welding and thermal spraying. Filer products for weld-surfacing and/or coating. Classification. Codification ot the chemical composition) | 74 | chevron_right |
| NF A 81-950 NF A 81-950 (Arc welding. Covered electrodes for wed manual welding depositing a mild alloy stee. Specification) | 18 | chevron_right |
| NF A 95-731 NF A 95-731 (Powder metallurgy. Requirements for sintered bronzes) | 3 | chevron_right |
| NF A36-205 NF A36-205 (Iron and steel. Steel plates for boilers and pressure vessels. Carbon and carbon manganese steel. Grades and types) | 42 | chevron_right |
| NF A36-605 NF A36-605 (Weldable steel drip forged articles for boilers and pressure vessels. Carbon and carbon-manganese steels. Grades and types) | 15 | chevron_right |
| NF A50-101 NF A50-101 (Aluminium and aluminium alloys. Seamless pressure vessels aluminium alloys. Grades. Half-product : billets.) | 5 | chevron_right |
| NF A50-402 NF A50-402 (Aluminium and aluminium alloys. Wire rod for electrical wiring. Characteristics.) | 2 | chevron_right |
| NF A50-403 NF A50-403 (Aluminium and aluminium alloys - Continuous cast and rolled wire for welding - Requirements) | 31 | chevron_right |
| NF A50-404 NF A50-404 (Aluminium and aluminium alloys - Continuous cast and rolled wire for mechanical purposes (excluding welding) - Requirements) | 83 | chevron_right |
| NF A50-411 NF A50-411 (Aluminium and aluminium alloys. Extruded and drawn products for general use. Characteristics.) | 50 | chevron_right |
| NF A50-451 NF A50-451 (Aluminium and aluminium alloys. Rolled products for general use. Characteristics.) | 85 | chevron_right |
| NF A50-471 NF A50-471 (Aluminium and aluminium alloys. Foils. Characteristics and tolerances.) | 1 | chevron_right |
| NF A50-501 NF A50-501 (Aluminium and aluminium alloys. Welded tubes. General properties.) | 6 | chevron_right |
| NF A50-901 NF A50-901 (Aluminium and aluminium alloy free-forged and drop-forged forgings. Chemical composition and mechanical properties.) | 21 | chevron_right |
| NF A51-101 NF A51-101 (Semi-finished products made of copper and copper alloys. Rolled products made of brasses for general use. Characteristics.) | 9 | chevron_right |
| NF A51-105 NF A51-105 (Semi-finished products made of copper and copper alloys. Bars, wires and sections made of leaded brasses. Characterististics.) | 5 | chevron_right |
| NF A51-107 NF A51-107 (Semi-products made from copper and copper alloys. Rolled products made from nickel silver for general use.) | 6 | chevron_right |
| NF A51-109 NF A51-109 (Semi-finished copper and copper alloys. Beryllium copper rolled products. Requirements, dimensions and conditions of acceptance.) | 2 | chevron_right |
| NF A51-112 NF A51-112 (Semi-finished copper and copper alloy products. General purpose rolled copper-nickel products.) | 8 | chevron_right |
| NF A51-113 NF A51-113 (Semi-finished products of copper and copper alloys. Rolled aluminium bronze products. Characteristics.) | 6 | chevron_right |
| NF A51-115 NF A51-115 (Semi-finished products of copper and copper alloys. Copper alloy sheet plates, sheets and circles for heat exchangers. Characteristics.) | 6 | chevron_right |
| NF A51-117 NF A51-117 (Semi-finished products of copper and copper alloys. Bars, wires and sections made of nickel silver. Characteristics.) | 6 | chevron_right |
| NF A53-715 NF A53-715 (Foundry products. Copper-nickel-zinc alloy and nickel-copper castings. Characteristics.) | 4 | chevron_right |
| NF A54-100 NF A54-100 (Refined nickel) | 4 | chevron_right |
| NF A54-101 NF A54-101 (Nickel and nickel alloys. Rolled products in non-alloyed nickel) | 2 | chevron_right |
| NF A54-401 NF A54-401 (Nickel and nickel alloys. Nickel-molybdenum and nickel- molybdenum-chromium-alloys.) | 3 | chevron_right |
| NF A56-101 NF A56-101 (Antifriction alloy ingots. Characteristics.) | 14 | chevron_right |
| NF A57-101 NF A57-101 (Non ferrous metals. Unalloyed aluminium in ingots for remelting.) | 5 | chevron_right |
| NF A57-102 NF A57-102 (Foundry products. Magnesium alloys ingots for pressure die castings.) | 5 | chevron_right |
| NF A57-350 NF A57-350 (Wrought aluminium) | 4 | chevron_right |
| NF A57-704 NF A57-704 (Foundry products. Permanent mould castings and sand castings of magnesium alloys. Properties.) | 10 | chevron_right |
| NF A57-705 NF A57-705 (Foundry products. Pressure die castings of magnesium alloys. Properties.) | 5 | chevron_right |
| NF A65-717 NF A65-717 (Semi-finished products made of magnesium alloys ; composition and characteristics of rolled and drawn products for general use.) | 5 | chevron_right |
| NF A81-331 NF A81-331 (Wire electrodes, wires and rods for welding of aluminium and aluminium alloys) | 5 | chevron_right |
| NF A81-362 NF A81-362 (Welding, soldering, brazing, braze-welding. Filler metals for soldering, brazing and braze-welding. Classification, coding, acceptance testing) | 46 | chevron_right |
| NF A82-100 NF A82-100 (Electric resistance welding. Materials for resistance welding electrodes and ancillary equipment) | 11 | chevron_right |
| NF A95-732 NF A95-732 (Powder metallurgy. Requirements for sintered brass) | 1 | chevron_right |
| NF C31-520 NF C31-520 (Flat aluminium and aluminium alloys bars for switchboards and electrical wirings (with rounded edges)) | 2 | chevron_right |
| NF CEN/TS 13388 NF CEN/TS 13388 (Copper and copper alloys - Compendium of compositions and products) | 802 | chevron_right |
| NF E 29-043 NF E 29-043 (Industrial piping - Non alloy and alloy - Steel bolting for flanges assemblies of pipeworks, boilers and pressure vessels - Specifications) | 21 | chevron_right |
| NF E22-555 NF E22-555 (Plain bearings. Aluminium alloy for solid bearings) | 1 | chevron_right |
| NF EN 10001 NF EN 10001 (Definition and classification of pig-irons) | 13 | chevron_right |
| NF EN 10016-2 NF EN 10016-2 (Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod) | 60 | chevron_right |
| NF EN 10016-3 NF EN 10016-3 (Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod) | 6 | chevron_right |
| NF EN 10016-4 NF EN 10016-4 (Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications) | 68 | chevron_right |
| NF EN 10025 NF EN 10025 (Hot rolled products of non-alloy structural steels; technical delivery conditions) | 60 | chevron_right |
| NF EN 10025-2 NF EN 10025-2 (Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels) | 58 | chevron_right |
| NF EN 10025-3 NF EN 10025-3 (Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels) | 16 | chevron_right |
| NF EN 10025-4 NF EN 10025-4 (Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels) | 20 | chevron_right |
| NF EN 10025-5 NF EN 10025-5 (Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance) | 38 | chevron_right |
| NF EN 10025-6 NF EN 10025-6 (Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition) | 41 | chevron_right |
| NF EN 10028-2 NF EN 10028-2 (Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties) | 34 | chevron_right |
| NF EN 10028-3 NF EN 10028-3 (Flat products made of steels for pressure purposes - Part 3: weldable fine grain steels, normalized) | 30 | chevron_right |
| NF EN 10028-4 NF EN 10028-4 (Flat products made of steels for pressure purposes - Part 4: nickel alloy steels with specified low temperature properties) | 15 | chevron_right |
| NF EN 10028-5 NF EN 10028-5 (Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled) | 18 | chevron_right |
| NF EN 10028-6 NF EN 10028-6 (Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered) | 32 | chevron_right |
| NF EN 10028-7 NF EN 10028-7 (Flat products made of steels for pressure purposes - Part 7: Stainless steels) | 128 | chevron_right |
| NF EN 10083-1 NF EN 10083-1 (Quenched and tempered steels - Part 1: Technical delivery conditions for special steels (includes amendment A1:1996)) | 100 | chevron_right |
| NF EN 10083-2 NF EN 10083-2 (Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels) | 57 | chevron_right |
| NF EN 10083-3 NF EN 10083-3 (Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels) | 56 | chevron_right |
| NF EN 10084 NF EN 10084 (Case hardening steels - Technical delivery conditions) | 72 | chevron_right |
| NF EN 10085 NF EN 10085 (Nitriding steels - Technical delivery conditions) | 18 | chevron_right |
| NF EN 10087 NF EN 10087 (Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods) | 34 | chevron_right |
| NF EN 10088-1 NF EN 10088-1 (Stainless steels - Part 1: List of stainless steels) | 433 | chevron_right |
| NF EN 10088-2 NF EN 10088-2 (Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes) | 215 | chevron_right |
| NF EN 10088-3 NF EN 10088-3 (Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes) | 227 | chevron_right |
| NF EN 10088-4 NF EN 10088-4 (Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes) | 86 | chevron_right |
| NF EN 10088-5 NF EN 10088-5 (Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes) | 84 | chevron_right |
| NF EN 10089 NF EN 10089 (Hot-rolled steels for quenched and tempered springs - Technical delivery conditions) | 38 | chevron_right |
| NF EN 10090 NF EN 10090 (Valve steels and alloys for internal combustion engines) | 20 | chevron_right |
| NF EN 10095 NF EN 10095 (Heat resisting steels and nickel alloys) | 53 | chevron_right |
| NF EN 10106 NF EN 10106 (Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state) | 70 | chevron_right |
| NF EN 10107 NF EN 10107 (Grain-oriented electrical steel sheet and strip delivered in the fully processed state) | 98 | chevron_right |
| NF EN 10111 NF EN 10111 (Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions) | 8 | chevron_right |
| NF EN 10113-2 NF EN 10113-2 (Hot-rolled products in weldable fine grain structural steels - Part 2: delivery conditions for normalized rolled steels) | 16 | chevron_right |
| NF EN 10113-3 NF EN 10113-3 (Hot-rolled products in weldable fine grain structural steels - Part 3: delivery conditions for thermomechanically rolled steels) | 16 | chevron_right |
| NF EN 10120 NF EN 10120 (Steel sheet and strip for welded gas cylinders) | 10 | chevron_right |
| NF EN 10126 NF EN 10126 (Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state) | 12 | chevron_right |
| NF EN 10130 NF EN 10130 (Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions) | 17 | chevron_right |
| NF EN 10132 NF EN 10132 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions) | 74 | chevron_right |
| NF EN 10132-2 NF EN 10132-2 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels) | 8 | chevron_right |
| NF EN 10132-3 NF EN 10132-3 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering) | 24 | chevron_right |
| NF EN 10132-4 NF EN 10132-4 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4: Spring steels and other applications) | 30 | chevron_right |
| NF EN 10137-2 NF EN 10137-2 (Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels) | 40 | chevron_right |
| NF EN 10137-3 NF EN 10137-3 (Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels) | 16 | chevron_right |
| NF EN 10139 NF EN 10139 (Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions) | 12 | chevron_right |
| NF EN 10142 NF EN 10142 (Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions) | 38 | chevron_right |
| NF EN 10147 NF EN 10147 (Continuously hot-dip zinc coated structural steels strip and sheet - Technical delivery conditions) | 46 | chevron_right |
| NF EN 10149-2 NF EN 10149-2 (Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels) | 22 | chevron_right |
| NF EN 10149-3 NF EN 10149-3 (Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels) | 8 | chevron_right |
| NF EN 10151 NF EN 10151 (Stainless steel strip for springs - Technical delivery conditions) | 20 | chevron_right |
| NF EN 10152 NF EN 10152 (Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions) | 16 | chevron_right |
| NF EN 10154 NF EN 10154 (Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions) | 20 | chevron_right |
| NF EN 10155 NF EN 10155 (Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions) | 18 | chevron_right |
| NF EN 10165 NF EN 10165 (Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state) | 16 | chevron_right |
| NF EN 10169-1 NF EN 10169-1 (Continuously organic coated (coil coated) steel flat products - Part 1: general information (definitions, materials, tolerances, test methods)) | 15 | chevron_right |
| NF EN 10202 NF EN 10202 (Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel) | 48 | chevron_right |
| NF EN 10203 NF EN 10203 (Cold reduced electrolytic tinplate) | 8 | chevron_right |
| NF EN 10205 NF EN 10205 (Cold reduced tinmill products - Blackplate) | 51 | chevron_right |
| NF EN 10207 NF EN 10207 (Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars) | 9 | chevron_right |
| NF EN 10208-1 NF EN 10208-1 (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A) | 10 | chevron_right |
| NF EN 10208-2 NF EN 10208-2 (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B) | 32 | chevron_right |
| NF EN 10209 NF EN 10209 (Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions) | 22 | chevron_right |
| NF EN 10210-1 NF EN 10210-1 (Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 28 | chevron_right |
| NF EN 10210-3 NF EN 10210-3 (Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels) | 96 | chevron_right |
| NF EN 10213 NF EN 10213 (Steel castings for pressure purposes) | 66 | chevron_right |
| NF EN 10213-2 NF EN 10213-2 (Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures) | 26 | chevron_right |
| NF EN 10213-3 NF EN 10213-3 (Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures) | 14 | chevron_right |
| NF EN 10213-4 NF EN 10213-4 (Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades) | 20 | chevron_right |
| NF EN 10214 NF EN 10214 (Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions) | 26 | chevron_right |
| NF EN 10215 NF EN 10215 (Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions) | 21 | chevron_right |
| NF EN 10216-1 NF EN 10216-1 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties) | 12 | chevron_right |
| NF EN 10216-2 NF EN 10216-2 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties) | 58 | chevron_right |
| NF EN 10216-3 NF EN 10216-3 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes) | 34 | chevron_right |
| NF EN 10216-4 NF EN 10216-4 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties) | 18 | chevron_right |
| NF EN 10216-5 NF EN 10216-5 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes) | 80 | chevron_right |
| NF EN 10217-1 NF EN 10217-1 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties) | 12 | chevron_right |
| NF EN 10217-2 NF EN 10217-2 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties) | 8 | chevron_right |
| NF EN 10217-3 NF EN 10217-3 (Welded steel tubes for pressure purposes - Technical delivery conditions -Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties) | 20 | chevron_right |
| NF EN 10217-4 NF EN 10217-4 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties) | 4 | chevron_right |
| NF EN 10217-5 NF EN 10217-5 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties) | 6 | chevron_right |
| NF EN 10217-6 NF EN 10217-6 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties) | 4 | chevron_right |
| NF EN 10217-7 NF EN 10217-7 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes) | 46 | chevron_right |
| NF EN 10219-1 NF EN 10219-1 (Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 40 | chevron_right |
| NF EN 10219-3 NF EN 10219-3 (Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels) | 88 | chevron_right |
| NF EN 10222-2 NF EN 10222-2 (Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties) | 34 | chevron_right |
| NF EN 10222-3 NF EN 10222-3 (Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties) | 10 | chevron_right |
| NF EN 10222-4 NF EN 10222-4 (Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength) | 26 | chevron_right |
| NF EN 10222-5 NF EN 10222-5 (Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels) | 60 | chevron_right |
| NF EN 10224 NF EN 10224 (Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions) | 6 | chevron_right |
| NF EN 10225 NF EN 10225 (Weldable structural steels for fixed offshore structures - Technical delivery conditions) | 96 | chevron_right |
| NF EN 10225-1 NF EN 10225-1 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates) | 22 | chevron_right |
| NF EN 10225-2 NF EN 10225-2 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 2: Sections) | 18 | chevron_right |
| NF EN 10225-3 NF EN 10225-3 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 3: Hot finished hollow sections) | 24 | chevron_right |
| NF EN 10225-4 NF EN 10225-4 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections) | 18 | chevron_right |
| NF EN 10248-1 NF EN 10248-1 (Hot-rolled steel sheet piles - Part 1: Technical delivery conditions) | 16 | chevron_right |
| NF EN 10249-1 NF EN 10249-1 (Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions) | 6 | chevron_right |
| NF EN 10250-2 NF EN 10250-2 (Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels) | 47 | chevron_right |
| NF EN 10250-3 NF EN 10250-3 (Open die steel forgings for general engineering purposes - Part 3: Alloy special steels) | 42 | chevron_right |
| NF EN 10250-4 NF EN 10250-4 (Open die steel forgings for general engineering purposes - Part 4: Stainless steels) | 70 | chevron_right |
| NF EN 10253-1 NF EN 10253-1 (Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements) | 2 | chevron_right |
| NF EN 10253-2 NF EN 10253-2 (Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements) | 64 | chevron_right |
| NF EN 10253-3 NF EN 10253-3 (Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements) | 50 | chevron_right |
| NF EN 10253-4 NF EN 10253-4 (Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements) | 50 | chevron_right |
| NF EN 10255 NF EN 10255 (Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions) | 2 | chevron_right |
| NF EN 10263-2 NF EN 10263-2 (Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working) | 18 | chevron_right |
| NF EN 10263-3 NF EN 10263-3 (Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels) | 50 | chevron_right |
| NF EN 10263-4 NF EN 10263-4 (Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering) | 72 | chevron_right |
| NF EN 10263-5 NF EN 10263-5 (Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels) | 38 | chevron_right |
| NF EN 10264-4 NF EN 10264-4 (Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire) | 10 | chevron_right |
| NF EN 10265 NF EN 10265 (Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation) | 32 | chevron_right |
| NF EN 10267 NF EN 10267 (Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures) | 20 | chevron_right |
| NF EN 10268 NF EN 10268 (Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions) | 47 | chevron_right |
| NF EN 10269 NF EN 10269 (Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties) | 88 | chevron_right |
| NF EN 10270-1 NF EN 10270-1 (Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire) | 5 | chevron_right |
| NF EN 10270-2 NF EN 10270-2 (Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire) | 12 | chevron_right |
| NF EN 10270-3 NF EN 10270-3 (Steel wire for mechanical springs - Part 3: Stainless spring steel wire) | 12 | chevron_right |
| NF EN 10271 NF EN 10271 (Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions) | 15 | chevron_right |
| NF EN 10272 NF EN 10272 (Stainless steel bars for pressure purposes) | 70 | chevron_right |
| NF EN 10273 NF EN 10273 (Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties) | 32 | chevron_right |
| NF EN 10277 NF EN 10277 (Bright steel products - Technical delivery conditions) | 169 | chevron_right |
| NF EN 10277-2 NF EN 10277-2 (Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes) | 29 | chevron_right |
| NF EN 10277-3 NF EN 10277-3 (Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels) | 34 | chevron_right |
| NF EN 10277-4 NF EN 10277-4 (Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels) | 20 | chevron_right |
| NF EN 10277-5 NF EN 10277-5 (Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering) | 34 | chevron_right |
| NF EN 10283 NF EN 10283 (Corrosion resistant steel castings) | 61 | chevron_right |
| NF EN 10292 NF EN 10292 (Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions) | 197 | chevron_right |
| NF EN 10293 NF EN 10293 (Steel castings for general engineering uses) | 66 | chevron_right |
| NF EN 10294-1 NF EN 10294-1 (Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels) | 10 | chevron_right |
| NF EN 10294-2 NF EN 10294-2 (Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties) | 20 | chevron_right |
| NF EN 10295 NF EN 10295 (Heat resistant steel castings) | 58 | chevron_right |
| NF EN 10296-1 NF EN 10296-1 (Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes) | 34 | chevron_right |
| NF EN 10296-2 NF EN 10296-2 (Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel) | 66 | chevron_right |
| NF EN 10297-1 NF EN 10297-1 (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes) | 62 | chevron_right |
| NF EN 10297-2 NF EN 10297-2 (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel) | 84 | chevron_right |
| NF EN 10302 NF EN 10302 (Creep resisting steels, nickel and cobalt alloys) | 70 | chevron_right |
| NF EN 10303 NF EN 10303 (Thin magnetic steel sheet and strip for use at medium frequencies) | 18 | chevron_right |
| NF EN 10304 NF EN 10304 (Magnetic materials (iron and steel) for use in relays) | 5 | chevron_right |
| NF EN 10305-1 NF EN 10305-1 (Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes) | 30 | chevron_right |
| NF EN 10305-2 NF EN 10305-2 (Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes) | 10 | chevron_right |
| NF EN 10305-3 NF EN 10305-3 (Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes) | 50 | chevron_right |
| NF EN 10305-4 NF EN 10305-4 (Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems) | 6 | chevron_right |
| NF EN 10305-5 NF EN 10305-5 (Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes) | 32 | chevron_right |
| NF EN 10305-6 NF EN 10305-6 (Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems) | 10 | chevron_right |
| NF EN 10323 NF EN 10323 (Steel wire and wire products - Bead wire) | 5 | chevron_right |
| NF EN 10324 NF EN 10324 (Steel wire and wire products - Hose reinforcement wire) | 3 | chevron_right |
| NF EN 10326 NF EN 10326 (Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions) | 56 | chevron_right |
| NF EN 10327 NF EN 10327 (Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions) | 84 | chevron_right |
| NF EN 10331 NF EN 10331 (Magnetic materials - Specification for sintered soft magnetic materials) | 14 | chevron_right |
| NF EN 10336 NF EN 10336 (Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming) | 50 | chevron_right |
| NF EN 10338 NF EN 10338 (Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions) | 73 | chevron_right |
| NF EN 10340 NF EN 10340 (Steel castings for structural uses) | 24 | chevron_right |
| NF EN 10341 NF EN 10341 (Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state) | 28 | chevron_right |
| NF EN 10343 NF EN 10343 (Steels for quenching and tempering for construction purposes - Technical delivery conditions) | 26 | chevron_right |
| NF EN 10346 NF EN 10346 (Continuously hot-dip coated steel flat products - Technical delivery conditions) | 485 | chevron_right |
| NF EN 10349 NF EN 10349 (Steel castings - Austenitic manganese steel castings) | 18 | chevron_right |
| NF EN 10378 NF EN 10378 (Welded stainless steel square and rectangular tubes for mechanical and structural engineering and decorative use - Technical delivery conditions) | 46 | chevron_right |
| NF EN 1044 NF EN 1044 (Brazing - Filler metals) | 184 | chevron_right |
| NF EN 1057 NF EN 1057 (Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications) | 2 | chevron_right |
| NF EN 1094-2 NF EN 1094-2 (Insulating refractory products - Part 2: Classification of shaped products (ISO 2245:1990 modified)) | 24 | chevron_right |
| NF EN 1172 NF EN 1172 (Copper and copper alloys - Sheet and strip for building purposes) | 12 | chevron_right |
| NF EN 1179 NF EN 1179 (Zinc an zinc alloys - Primary zinc) | 5 | chevron_right |
| NF EN 12070 NF EN 12070 (Welding consumables - Wire electrodes, wires and rods for arc welding of creep-resisting steels) | 63 | chevron_right |
| NF EN 12071 NF EN 12071 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels) | 8 | chevron_right |
| NF EN 12072 NF EN 12072 (Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels) | 39 | chevron_right |
| NF EN 12163 NF EN 12163 (Copper and copper alloys - Rod for general purposes) | 110 | chevron_right |
| NF EN 12164 NF EN 12164 (Copper and copper alloys - Rod for free machining purposes) | 90 | chevron_right |
| NF EN 12165 NF EN 12165 (Copper and copper alloys - Wrought and unwrought forging stock) | 126 | chevron_right |
| NF EN 12166 NF EN 12166 (Copper and copper alloys - Wire for general purposes) | 104 | chevron_right |
| NF EN 12167 NF EN 12167 (Copper and copper alloys - Profiles and bars for general purposes) | 142 | chevron_right |
| NF EN 12168 NF EN 12168 (Copper and copper alloys - Hollow rod for free machining purposes) | 64 | chevron_right |
| NF EN 12369-1 NF EN 12369-1 (Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards) | 11 | chevron_right |
| NF EN 12369-3 NF EN 12369-3 (Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels) | 3 | chevron_right |
| NF EN 12392 NF EN 12392 (Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment) | 94 | chevron_right |
| NF EN 12420 NF EN 12420 (Copper and copper alloys - Forgings) | 126 | chevron_right |
| NF EN 12421 NF EN 12421 (Magnesium and magnesium alloys - Unalloyed magnesium) | 23 | chevron_right |
| NF EN 12438 NF EN 12438 (Magnesium and magnesium alloys - Magnesium alloys for cast anodes) | 30 | chevron_right |
| NF EN 12449 NF EN 12449 (Copper and copper alloys - Seamless, round tubes for general purposes) | 94 | chevron_right |
| NF EN 12450 NF EN 12450 (Copper and copper alloys - Seamless, round copper capillary tubes) | 2 | chevron_right |
| NF EN 12451 NF EN 12451 (Copper and copper alloys - Seamless, round tubes for heat exchangers) | 16 | chevron_right |
| NF EN 12452 NF EN 12452 (Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers) | 10 | chevron_right |
| NF EN 12475-1 NF EN 12475-1 (Classification of dense shaped refractory products - Part 1: Alumina-silica products) | 13 | chevron_right |
| NF EN 12475-2 NF EN 12475-2 (Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon) | 31 | chevron_right |
| NF EN 12475-3 NF EN 12475-3 (Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 30% residual carbon) | 55 | chevron_right |
| NF EN 12475-4 NF EN 12475-4 (Classification of dense shaped refractory products - Part 4: Special products) | 80 | chevron_right |
| NF EN 12476 NF EN 12476 (Phosphate conversion coatings of metals - Method of specifying requirements) | 4 | chevron_right |
| NF EN 12496 NF EN 12496 (Galvanic anodes for cathodic protection in seawater and saline mud) | 10 | chevron_right |
| NF EN 12513 NF EN 12513 (Founding - Abrasion resistant cast irons) | 38 | chevron_right |
| NF EN 12516-4 NF EN 12516-4 (Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel) | 78 | chevron_right |
| NF EN 12535 NF EN 12535 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels) | 11 | chevron_right |
| NF EN 12536 NF EN 12536 (Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification) | 6 | chevron_right |
| NF EN 12548 NF EN 12548 (Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves) | 32 | chevron_right |
| NF EN 12588 NF EN 12588 (Lead and lead alloys - Rolled lead sheet for building purposes) | 1 | chevron_right |
| NF EN 12659 NF EN 12659 (Lead and lead alloys - Lead) | 8 | chevron_right |
| NF EN 12735-1 NF EN 12735-1 (Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems) | 4 | chevron_right |
| NF EN 12735-2 NF EN 12735-2 (Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment) | 2 | chevron_right |
| NF EN 12765 NF EN 12765 (Classification of thermosetting wood adhesive for non-structural applications) | 4 | chevron_right |
| NF EN 12844 NF EN 12844 (Zinc and zinc alloys - Castings - Specifications) | 16 | chevron_right |
| NF EN 12861 NF EN 12861 (Copper and copper alloys - Scrap) | 83 | chevron_right |
| NF EN 12952-2 NF EN 12952-2 (Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories) | 114 | chevron_right |
| NF EN 12953-2 NF EN 12953-2 (Shell boilers - Part 2: Materials for pressure parts of boilers and accessories) | 29 | chevron_right |
| NF EN 1301-2 NF EN 1301-2 (Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties) | 45 | chevron_right |
| NF EN 13148 NF EN 13148 (Copper and copper alloys - Hot-dip tinned strip) | 56 | chevron_right |
| NF EN 13195 NF EN 13195 (Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)) | 48 | chevron_right |
| NF EN 13195-1 NF EN 13195-1 (Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications) | 20 | chevron_right |
| NF EN 13261 NF EN 13261 (Railway applications - Wheelsets and bogies - Axles - Product requirements) | 3 | chevron_right |
| NF EN 13262 NF EN 13262 (Railway applications - Wheelsets and bogies - Wheels - Product requirements) | 5 | chevron_right |
| NF EN 13283 NF EN 13283 (Zinc and zinc alloys - Secondary zinc) | 3 | chevron_right |
| NF EN 13347 NF EN 13347 (Copper and copper alloys - Rod and wire for welding and braze welding) | 58 | chevron_right |
| NF EN 13348 NF EN 13348 (Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum) | 2 | chevron_right |
| NF EN 13353 NF EN 13353 (Solid wood panels (SWP) - Requirements) | 9 | chevron_right |
| NF EN 13445-2 NF EN 13445-2 (Unfired pressure vessels - Part 2: Materials) | 408 | chevron_right |
| NF EN 13445-6 NF EN 13445-6 (Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron) | 20 | chevron_right |
| NF EN 13445-8 NF EN 13445-8 (Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys) | 34 | chevron_right |
| NF EN 13480-2 NF EN 13480-2 (Metallic industrial piping - Part 2: Materials) | 406 | chevron_right |
| NF EN 13599 NF EN 13599 (Copper and copper alloys - Copper plate, sheet and strip for electrical purposes) | 16 | chevron_right |
| NF EN 13600 NF EN 13600 (Copper and copper alloys - Seamless copper tubes for electrical purposes) | 20 | chevron_right |
| NF EN 13601 NF EN 13601 (Copper and copper alloys - Copper rod, bar and wire for general electrical purposes) | 32 | chevron_right |
| NF EN 13602 NF EN 13602 (Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors) | 10 | chevron_right |
| NF EN 13604 NF EN 13604 (Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper) | 4 | chevron_right |
| NF EN 13605 NF EN 13605 (Copper and copper alloys - Copper profiles and profiled wire for electrical purposes) | 36 | chevron_right |
| NF EN 13674-1 NF EN 13674-1 (Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above) | 18 | chevron_right |
| NF EN 13674-2 NF EN 13674-2 (Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above) | 18 | chevron_right |
| NF EN 13674-3 NF EN 13674-3 (Railway applications - Track - Rail - Part 3: Check rails) | 6 | chevron_right |
| NF EN 13674-4 NF EN 13674-4 (Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m) | 15 | chevron_right |
| NF EN 13835 NF EN 13835 (Founding - Austenitic cast irons) | 36 | chevron_right |
| NF EN 1386 NF EN 1386 (Aluminium and aluminium alloys - Tread plate - Specifications) | 22 | chevron_right |
| NF EN 1396 NF EN 1396 (Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications) | 62 | chevron_right |
| NF EN 13981-1 NF EN 13981-1 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products) | 20 | chevron_right |
| NF EN 13981-2 NF EN 13981-2 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets) | 10 | chevron_right |
| NF EN 13981-3 NF EN 13981-3 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings) | 17 | chevron_right |
| NF EN 13981-4 NF EN 13981-4 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings) | 8 | chevron_right |
| NF EN 14121 NF EN 14121 (Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications) | 9 | chevron_right |
| NF EN 14286 NF EN 14286 (Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods) | 18 | chevron_right |
| NF EN 14436 NF EN 14436 (Copper and copper alloys - Electrolytically tinned strip) | 54 | chevron_right |
| NF EN 14700 NF EN 14700 (Welding consumables - Welding consumables for hard-facing) | 30 | chevron_right |
| NF EN 1561 NF EN 1561 (Founding - Grey cast irons) | 41 | chevron_right |
| NF EN 1562 NF EN 1562 (Founding - Malleable cast irons) | 42 | chevron_right |
| NF EN 1563 NF EN 1563 (Founding - Spheroidal graphite cast irons) | 93 | chevron_right |
| NF EN 1564 NF EN 1564 (Founding - Ausferritic spheroidal graphite cast irons) | 33 | chevron_right |
| NF EN 15776 NF EN 15776 (Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%) | 33 | chevron_right |
| NF EN 1592-2 NF EN 1592-2 (Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties) | 24 | chevron_right |
| NF EN 1599 NF EN 1599 (Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels) | 12 | chevron_right |
| NF EN 1600 NF EN 1600 (Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels) | 34 | chevron_right |
| NF EN 16079 NF EN 16079 (Founding - Compacted (vermicular) graphite cast irons) | 15 | chevron_right |
| NF EN 16124 NF EN 16124 (Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications) | 18 | chevron_right |
| NF EN 16482 NF EN 16482 (Founding - Continuous cast iron bars) | 62 | chevron_right |
| NF EN 1652 NF EN 1652 (Copper and copper alloys - Plate, sheet, strip and circles for general purposes) | 84 | chevron_right |
| NF EN 1653 NF EN 1653 (Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units) | 24 | chevron_right |
| NF EN 1654 NF EN 1654 (Copper and copper alloys - Strip for springs and connectors) | 40 | chevron_right |
| NF EN 1668 NF EN 1668 (Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels) | 8 | chevron_right |
| NF EN 1676 NF EN 1676 (Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications) | 101 | chevron_right |
| NF EN 16914 NF EN 16914 (Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions) | 2 | chevron_right |
| NF EN 1706 NF EN 1706 (Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties) | 103 | chevron_right |
| NF EN 1715-2 NF EN 1715-2 (Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications) | 18 | chevron_right |
| NF EN 1715-3 NF EN 1715-3 (Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)) | 49 | chevron_right |
| NF EN 1715-4 NF EN 1715-4 (Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications) | 20 | chevron_right |
| NF EN 1753 NF EN 1753 (Magnesium and magnesium alloys - Magnesium alloy ingots and castings) | 158 | chevron_right |
| NF EN 1758 NF EN 1758 (Copper and copper alloys - Strip for lead frames) | 6 | chevron_right |
| NF EN 1774 NF EN 1774 (Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid) | 8 | chevron_right |
| NF EN 197-1 NF EN 197-1 (Cement - Part 1: Composition, specifications and conformity criteria for common cements) | 162 | chevron_right |
| NF EN 1976 NF EN 1976 (Copper and copper alloys - Cast unwrought copper products) | 44 | chevron_right |
| NF EN 1977 NF EN 1977 (Copper and copper alloys - Copper drawing stock (wire rod)) | 36 | chevron_right |
| NF EN 1978 NF EN 1978 (Copper and copper alloys - Copper cathodes) | 4 | chevron_right |
| NF EN 1981 NF EN 1981 (Copper and copper alloys - Master alloys) | 78 | chevron_right |
| NF EN 1982 NF EN 1982 (Copper and copper alloys - Ingots and castings) | 206 | chevron_right |
| NF EN 2030 NF EN 2030 (Aerospace series-Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De ≤ 150 mm) | 2 | chevron_right |
| NF EN 2031 NF EN 2031 (Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars) | 2 | chevron_right |
| NF EN 204 NF EN 204 (Classification of thermoplastic wood adhesives for non-structural applications) | 4 | chevron_right |
| NF EN 2072 NF EN 2072 (Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2085 NF EN 2085 (Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| NF EN 2086 NF EN 2086 (Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a ≤ 150 mm) | 1 | chevron_right |
| NF EN 2087 NF EN 2087 (Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheets and strips 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2088 NF EN 2088 (Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2089 NF EN 2089 (Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 20898-1 NF EN 20898-1 (Mechanical properties of fasteners - Part 1: Bolts, screws and studs) | 10 | chevron_right |
| NF EN 20898-2 NF EN 20898-2 (Mechanical properties of fasteners - Part 2: Nuts with specified proof load values) | 8 | chevron_right |
| NF EN 20898-6 NF EN 20898-6 (Mechanical properties of fasteners - Part 6: Nuts with specified proof load values) | 7 | chevron_right |
| NF EN 2090 NF EN 2090 (Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2092 NF EN 2092 (Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2093 NF EN 2093 (Aerospace series - Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| NF EN 2094 NF EN 2094 (Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgings 3 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| NF EN 2100 NF EN 2100 (Aerospace series - Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D ≤ 200 mm) | 1 | chevron_right |
| NF EN 2104 NF EN 2104 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD) | 1 | chevron_right |
| NF EN 2114 NF EN 2114 (Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D ≤ 10 mm) | 1 | chevron_right |
| NF EN 2115 NF EN 2115 (Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D ≤ 10 mm No) | 1 | chevron_right |
| NF EN 2116 NF EN 2116 (Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D ≤ 10 mm No) | 1 | chevron_right |
| NF EN 2117 NF EN 2117 (Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D ≤ 10 mm) | 1 | chevron_right |
| NF EN 2119 NF EN 2119 (Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa) | 2 | chevron_right |
| NF EN 2125 NF EN 2125 (Aerospace series - Aluminium alloy Al-P16-T6151 - Plates - 6 mm < a ≤ 120 mm) | 1 | chevron_right |
| NF EN 2126 NF EN 2126 (Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| NF EN 2127 NF EN 2127 (Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D ≤ 100 mm) | 1 | chevron_right |
| NF EN 2128 NF EN 2128 (Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm ≤ a or D ≤ 75 mm) | 1 | chevron_right |
| NF EN 2135 NF EN 2135 (Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De ≤ 40 mm) | 1 | chevron_right |
| NF EN 2137 NF EN 2137 (Aerospace series - Steel FE-PL75 - 1 100 MPa ≤ Rm ≤ 1 250 MPa - Bars - De ≤ 100 mm) | 1 | chevron_right |
| NF EN 2174 NF EN 2174 (Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De ≤ 100 mm - Rm ≥ 850 MPa) | 2 | chevron_right |
| NF EN 2205 NF EN 2205 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| NF EN 2206 NF EN 2206 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa ≤ Rm ≤ 850 MPa - Bars - De ≤ 150 mm) | 2 | chevron_right |
| NF EN 2209 NF EN 2209 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheets, strips and plates - 0,5 mm ≤ a ≤ 20 mm) | 2 | chevron_right |
| NF EN 2213 NF EN 2213 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa) | 3 | chevron_right |
| NF EN 2221 NF EN 2221 (Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm ≤ a ≤ 55 mm) | 1 | chevron_right |
| NF EN 2222 NF EN 2222 (Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings) | 1 | chevron_right |
| NF EN 2226 NF EN 2226 (Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De ≤ 150 mm) | 2 | chevron_right |
| NF EN 2252 NF EN 2252 (Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa) | 3 | chevron_right |
| NF EN 2256 NF EN 2256 (Aerospace series - Aluminium alloy AL-P2618A - T852 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| NF EN 2259 NF EN 2259 (Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD) | 1 | chevron_right |
| NF EN 2260 NF EN 2260 (Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD) | 1 | chevron_right |
| NF EN 2261 NF EN 2261 (Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD) | 1 | chevron_right |
| NF EN 2262 NF EN 2262 (Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD) | 1 | chevron_right |
| NF EN 2278 NF EN 2278 (Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 150 mm) | 2 | chevron_right |
| NF EN 2279 NF EN 2279 (Aerospace series - Steel FE-PM37 - 900 MPa < Rm < 1 100 MPa - Forgings - De < 150 mm) | 1 | chevron_right |
| NF EN 2280 NF EN 2280 (Aerospace series - Steel FE-PM37 - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheet - a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2302 NF EN 2302 (Aerospace series - Heat-resisting nickel base alloy NiCr20Co3Fe3 - Rm ≥ 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm) | 1 | chevron_right |
| NF EN 2306 NF EN 2306 (Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars) | 1 | chevron_right |
| NF EN 2318 NF EN 2318 (Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm) | 1 | chevron_right |
| NF EN 2319 NF EN 2319 (Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a < 75 mm) | 1 | chevron_right |
| NF EN 2320 NF EN 2320 (Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a ≤ 75 mm) | 1 | chevron_right |
| NF EN 2321 NF EN 2321 (Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a ≤ 150 m) | 1 | chevron_right |
| NF EN 2326 NF EN 2326 (Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm) | 1 | chevron_right |
| NF EN 2381 NF EN 2381 (Aerospace series - Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| NF EN 2384 NF EN 2384 (Aerospace series - Aluminium alloy AL-P2014A T6511 - Extruded bars and sections a or D ≤ 150 mm) | 1 | chevron_right |
| NF EN 2385 NF EN 2385 (Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm) | 1 | chevron_right |
| NF EN 2387 NF EN 2387 (Aerospace series - Aluminium alloy 2014A - T6 - Tubes for structures - 0,6 mm < a < 12,5 mm) | 1 | chevron_right |
| NF EN 2390 NF EN 2390 (Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0.6 mm ≤ a ≤ 12.5 mm) | 1 | chevron_right |
| NF EN 2395 NF EN 2395 (Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2398 NF EN 2398 (Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for machined bolts - D ≤ 25 mm) | 2 | chevron_right |
| NF EN 2399 NF EN 2399 (Aerospace series. Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for forged bolts. D ≤ 25 mm) | 2 | chevron_right |
| NF EN 2400 NF EN 2400 (Aerospace series - Heat resisting nickel base alloy NI-P96-HT - Cold drawn and precipitation treated - Wire - D ≤ 10 mm) | 1 | chevron_right |
| NF EN 2402 NF EN 2402 (Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D ≤ 10 mm) | 1 | chevron_right |
| NF EN 2422 NF EN 2422 (Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm < a ≤ 120 mm) | 1 | chevron_right |
| NF EN 2428 NF EN 2428 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD) | 1 | chevron_right |
| NF EN 2429 NF EN 2429 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD) | 1 | chevron_right |
| NF EN 2430 NF EN 2430 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD) | 1 | chevron_right |
| NF EN 2431 NF EN 2431 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD) | 1 | chevron_right |
| NF EN 2432 NF EN 2432 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD) | 1 | chevron_right |
| NF EN 2438 NF EN 2438 (Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| NF EN 2439 NF EN 2439 (Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Forgings - De ≤ 40 mm) | 2 | chevron_right |
| NF EN 2446 NF EN 2446 (Aerospace series - Steel FE-PL1503 (35CrMo4) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 25 mm) | 2 | chevron_right |
| NF EN 2448 NF EN 2448 (Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| NF EN 2450 NF EN 2450 (Aerospace series - Steel 31NiMoCr10-5-3 1230 MPa ≤ Rm ≤ 1420 MPa - Bars - De ≤ 40 mm) | 1 | chevron_right |
| NF EN 2451 NF EN 2451 (Aerospace series - Steel 31NiMoCr10 - 5 - 3 - 1230 MPa ≤ Rm ≤ 1420 MPa - Forgings - De ≤ 40 mm) | 1 | chevron_right |
| NF EN 2460 NF EN 2460 (Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Bars - De ≤ 70 mm) | 2 | chevron_right |
| NF EN 2461 NF EN 2461 (Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Forgings - De ≤ 70 mm) | 2 | chevron_right |
| NF EN 2465 NF EN 2465 (Aerospace series - Steel X2CrNi18-9 - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bar for machining - 4 mm ≤ De ≤ 100 mm) | 2 | chevron_right |
| NF EN 2466 NF EN 2466 (Aerospace series - Steel FE-PA3901 (X2CrNi19-11) - Softened - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| NF EN 2467 NF EN 2467 (Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa) | 3 | chevron_right |
| NF EN 2468 NF EN 2468 (Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm ≤ a ≤ 5 mm) | 1 | chevron_right |
| NF EN 2469 NF EN 2469 (Aerospace series. Steel FE-PA3901 (X1CrNi18-10). Air melted. Softened. Wires. 0,4 mm ≤ D ≤ 12,5 mm. 450 MPa ≤ Rm ≤ 650 MPa) | 2 | chevron_right |
| NF EN 2470 NF EN 2470 (Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm ≤ D ≤ 10 mm) | 1 | chevron_right |
| NF EN 2475 NF EN 2475 (Aerospace series - Steel 30CrNiMo8 (1.6580) - Air melted - Hardened and tempered - Bar for machining - De ≤ 100 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| NF EN 2476 NF EN 2476 (Aerospace series - Steel 30CrNiMo8 (1.6580) - 1100 MPa ≤ Rm ≤ 1300 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| NF EN 2478 NF EN 2478 (Aerospace series - Steel FE-PL2107 (30NiCrMo16) - 1 220 MPa ≤ Rm ≤ 1 370 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| NF EN 2480 NF EN 2480 (Aerospace series - Steel 36NiCrMo16 (1.6773) - 1250 MPa ≤ Rm ≤ 1400 MPa - Bars - De ≤ 75 mm) | 2 | chevron_right |
| NF EN 2481 NF EN 2481 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Forgings - De ≤ 75 mm) | 2 | chevron_right |
| NF EN 2482 NF EN 2482 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 100 mm) | 2 | chevron_right |
| NF EN 2483 NF EN 2483 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| NF EN 2486 NF EN 2486 (Aerospace series - Aluminium alloy AL-P2618A - Forging stock) | 1 | chevron_right |
| NF EN 2502 NF EN 2502 (Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Bars) | 2 | chevron_right |
| NF EN 2503 NF EN 2503 (Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Forgings - De ≤ 150 mm) | 2 | chevron_right |
| NF EN 2510 NF EN 2510 (Aerospace series - Aluminium alloy 2024 - T42 - Drawn tubes for structural applications) | 1 | chevron_right |
| NF EN 2511 NF EN 2511 (Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm < a ≤ 100 mm) | 1 | chevron_right |
| NF EN 2512 NF EN 2512 (Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a ≤ 100 mm) | 1 | chevron_right |
| NF EN 2540 NF EN 2540 (Aerospace series - Steel X7CrNiAl17-7 (1.4568) - Air melted - Solution treated and precipitation hardened - Sheet and strip - a ≤ 6 mm - 1 240 MPa ≤ Rm ≤ 1 450 MPa) | 2 | chevron_right |
| NF EN 2541 NF EN 2541 (Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Wire for spring - D ≤ 4,0 mm) | 1 | chevron_right |
| NF EN 2542 NF EN 2542 (Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and wire - De ≤ 40 mm - For prevailing torque nuts) | 2 | chevron_right |
| NF EN 2543 NF EN 2543 (Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip - 0,3 mm ≤ a ≤ 2 mm - For prevailing torque nuts) | 2 | chevron_right |
| NF EN 2566 NF EN 2566 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD) | 1 | chevron_right |
| NF EN 2567 NF EN 2567 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD) | 1 | chevron_right |
| NF EN 2568 NF EN 2568 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD) | 1 | chevron_right |
| NF EN 2573 NF EN 2573 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Wires - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa) | 3 | chevron_right |
| NF EN 2630 NF EN 2630 (Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm with peripheral coarse grain control) | 1 | chevron_right |
| NF EN 2632 NF EN 2632 (Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| NF EN 2633 NF EN 2633 (Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control) | 1 | chevron_right |
| NF EN 2635 NF EN 2635 (Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bar and section - a or D ≤ 200 mm with peripheral coarse grain control) | 1 | chevron_right |
| NF EN 2636 NF EN 2636 (Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm with peripheral coarse grain control) | 1 | chevron_right |
| NF EN 2638 NF EN 2638 (Aerospace series - Aluminium alloy 2024-T3 - Extruded bar and section - 1,2 mm ≤ (a or D) ≤ 150 mm with coarse peripheral grain control) | 1 | chevron_right |
| NF EN 2681 NF EN 2681 (Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| NF EN 2684 NF EN 2684 (Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm < a ≤ 140 mm) | 1 | chevron_right |
| NF EN 26848 NF EN 26848 (Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding) | 9 | chevron_right |
| NF EN 2687 NF EN 2687 (Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| NF EN 26871 NF EN 26871 (Dentistry; dental base metal casting alloys (ISO 6871:1987)) | 1 | chevron_right |
| NF EN 2693 NF EN 2693 (Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2694 NF EN 2694 (Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2695 NF EN 2695 (Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2696 NF EN 2696 (Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2699 NF EN 2699 (Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm < D < 50 mm) | 1 | chevron_right |
| NF EN 2702 NF EN 2702 (Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Drawn or extruded bar and section - a or D ≤ 200 mm) | 1 | chevron_right |
| NF EN 2703 NF EN 2703 (Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2704 NF EN 2704 (Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Drawn bars - De ≤ 75 mm) | 1 | chevron_right |
| NF EN 2709 NF EN 2709 (Aerospace series - Aluminium alloy 2024 - T3510 - Bars and sections -1.2 mm ≤ (a or D) ≤ 150 mm - With peripheral coarse grain control) | 1 | chevron_right |
| NF EN 2726 NF EN 2726 (Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a ≤ 20 mm) | 1 | chevron_right |
| NF EN 2728 NF EN 2728 (Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a ≤ 20 mm) | 1 | chevron_right |
| NF EN 2731 NF EN 2731 (Aerospace series - Magnesium alloy MG-C46001 - T6 - Sand casting) | 1 | chevron_right |
| NF EN 2732 NF EN 2732 (Aerospace series - Magnesium alloy MG-C46001-T6 - Chill casting) | 1 | chevron_right |
| NF EN 2795 NF EN 2795 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD) | 1 | chevron_right |
| NF EN 2796 NF EN 2796 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD) | 1 | chevron_right |
| NF EN 2798 NF EN 2798 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD) | 1 | chevron_right |
| NF EN 2799 NF EN 2799 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD) | 1 | chevron_right |
| NF EN 2802 NF EN 2802 (Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2803 NF EN 2803 (Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 2813 NF EN 2813 (Aerospace series - Aluminium alloy AL-P-6061 - T6 - Drawn tube for pressure applications - 0,6 mm ≤ a ≤ 12,5 mm) | 1 | chevron_right |
| NF EN 2815 NF EN 2815 (Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 965 MPa) | 2 | chevron_right |
| NF EN 2816 NF EN 2816 (Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 965 MPa) | 2 | chevron_right |
| NF EN 2817 NF EN 2817 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1070 MPa) | 2 | chevron_right |
| NF EN 2818 NF EN 2818 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1070 MPa) | 2 | chevron_right |
| NF EN 2821 NF EN 2821 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - Rm ≥ 1310 MPa) | 3 | chevron_right |
| NF EN 2835 NF EN 2835 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 40 IRHD) | 1 | chevron_right |
| NF EN 2836 NF EN 2836 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD) | 1 | chevron_right |
| NF EN 2837 NF EN 2837 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD) | 1 | chevron_right |
| NF EN 2838 NF EN 2838 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD) | 1 | chevron_right |
| NF EN 2839 NF EN 2839 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD) | 1 | chevron_right |
| NF EN 2840 NF EN 2840 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD) | 1 | chevron_right |
| NF EN 2841 NF EN 2841 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 60 IRHD) | 1 | chevron_right |
| NF EN 2842 NF EN 2842 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 70 IRHD) | 1 | chevron_right |
| NF EN 2843 NF EN 2843 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD) | 1 | chevron_right |
| NF EN 2844 NF EN 2844 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IRHD) | 1 | chevron_right |
| NF EN 2845 NF EN 2845 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 50 IRHD) | 1 | chevron_right |
| NF EN 2846 NF EN 2846 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD) | 1 | chevron_right |
| NF EN 2847 NF EN 2847 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 70 IRHD) | 1 | chevron_right |
| NF EN 2848 NF EN 2848 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 80 IRHD) | 1 | chevron_right |
| NF EN 2849 NF EN 2849 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD) | 1 | chevron_right |
| NF EN 286-4 NF EN 286-4 (Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway folling stock) | 10 | chevron_right |
| NF EN 28839 NF EN 28839 (Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals) | 28 | chevron_right |
| NF EN 29453 NF EN 29453 (Soft solder alloys. Chemical compositions and forms) | 74 | chevron_right |
| NF EN 2947 NF EN 2947 (Aerospace series. Steel FE-PA3004 (X10CrNi18-09). Air melted. Non heat treated. Cold drawn wire. a or D ≤ 2,3 mm) | 2 | chevron_right |
| NF EN 2952 NF EN 2952 (Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1270 MPa ≤ Rm ≤ 1550 MPa) | 1 | chevron_right |
| NF EN 2959 NF EN 2959 (Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners 3 mm ≤ D ≤ 30 mm) | 2 | chevron_right |
| NF EN 2960 NF EN 2960 (Aerospace series - Heat resisting nickel base alloy (NI-P101HT), Cold worked and solution treated - Bars for machining for fasteners 3 mm ≤ D ≤ 50 mm) | 1 | chevron_right |
| NF EN 300 NF EN 300 (Oriented Strand Boards (OSB) - Definitions, classification and specifications) | 4 | chevron_right |
| NF EN 3018 NF EN 3018 (Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm) | 2 | chevron_right |
| NF EN 3115 NF EN 3115 (Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D ≤ 10 mm) | 1 | chevron_right |
| NF EN 312 NF EN 312 (Particleboards - Specifications) | 7 | chevron_right |
| NF EN 3120 NF EN 3120 (Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress relieved - Seamless tube for pressure systems - 4 mm ≤ D ≤ 51 mm - 690 MPa ≤ Rm ≤ 1 030 MPa) | 1 | chevron_right |
| NF EN 3160 NF EN 3160 (Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1310 MPa) | 2 | chevron_right |
| NF EN 3161 NF EN 3161 (Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa) | 2 | chevron_right |
| NF EN 3162 NF EN 3162 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 930 MPa) | 3 | chevron_right |
| NF EN 3163 NF EN 3163 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| NF EN 3219 NF EN 3219 (Aerospace series - Heat resisting nickel base alloy (NI-P100HT) - Cold worked and softened - Bar and wire for continuous forging extrusion for fasteners - 3 mm ≤ D ≤ 30 mm) | 1 | chevron_right |
| NF EN 3220 NF EN 3220 (Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ≤ D ≤ 30 mm) | 1 | chevron_right |
| NF EN 3310 NF EN 3310 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Not heat treated - Forging stock, for annealed forgings - De ≤ 360 mm) | 2 | chevron_right |
| NF EN 3311 NF EN 3311 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar for machining - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1160 MPa) | 2 | chevron_right |
| NF EN 3312 NF EN 3312 (Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Forgings De ≤ 150 mm) | 2 | chevron_right |
| NF EN 3314 NF EN 3314 (Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D ≤ 75 mm) | 1 | chevron_right |
| NF EN 3315 NF EN 3315 (Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - De ≤ 75 mm) | 2 | chevron_right |
| NF EN 3329 NF EN 3329 (Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts) | 2 | chevron_right |
| NF EN 3330 NF EN 3330 (Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealead - Bar and wire - De ≤ 40 mm - For prevailing torque nuts) | 2 | chevron_right |
| NF EN 3332 NF EN 3332 (Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 3333 NF EN 3333 (Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 3335 NF EN 3335 (Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 3338 NF EN 3338 (Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| NF EN 3339 NF EN 3339 (Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a ≤ 200 mm) | 1 | chevron_right |
| NF EN 3341 NF EN 3341 (Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 3342 NF EN 3342 (Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D ≤ 150 mm) | 1 | chevron_right |
| NF EN 3344 NF EN 3344 (Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| NF EN 3347 NF EN 3347 (Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| NF EN 3351 NF EN 3351 (Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De ≤ 150 mm) | 1 | chevron_right |
| NF EN 3354 NF EN 3354 (Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Sheet for superplastic forming. a ≤ 6 mm) | 2 | chevron_right |
| NF EN 3355 NF EN 3355 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa) | 2 | chevron_right |
| NF EN 3357 NF EN 3357 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 150 mm - 1 200 MPa ≤ Rm ≤ 1 400 MPa) | 2 | chevron_right |
| NF EN 3358 NF EN 3358 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 150 mm - Rm ≥ 1400 MPa) | 2 | chevron_right |
| NF EN 3359 NF EN 3359 (Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Vacuum induction melted and consumable electrode remelted - softened - forging stocks - a or D ≤ 300 mm) | 3 | chevron_right |
| NF EN 3361 NF EN 3361 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6mm - 1070 MPa ≤ Rm ≤ 1220 MPa) | 3 | chevron_right |
| NF EN 3364 NF EN 3364 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted, softened - Forging stocks - a or D ≤ 300 mm) | 3 | chevron_right |
| NF EN 3365 NF EN 3365 (Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted, softened - forging stock - a or D ≤ 300 mm) | 3 | chevron_right |
| NF EN 3378 NF EN 3378 (Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets - 1,6 mm ≤ D ≤ 10 mm) | 1 | chevron_right |
| NF EN 3451 NF EN 3451 (Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock, for annealed forgings - a or D ≤ 300 mm) | 1 | chevron_right |
| NF EN 3456 NF EN 3456 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled - a ≤ 6 mm) | 2 | chevron_right |
| NF EN 3459 NF EN 3459 (Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a ≤ 50 mm) | 2 | chevron_right |
| NF EN 3460 NF EN 3460 (Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D ≤ 150 - Rm ≥ 390 MPa) | 1 | chevron_right |
| NF EN 3464 NF EN 3464 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm) | 2 | chevron_right |
| NF EN 3468 NF EN 3468 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 MPa ≤ Rm ≤ 700 MPa - Forgings - De ≤ 100 mm) | 3 | chevron_right |
| NF EN 3469 NF EN 3469 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa) | 2 | chevron_right |
| NF EN 3470 NF EN 3470 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1200 MPa ≤ Rm ≤ 1400 MPa) | 2 | chevron_right |
| NF EN 3471 NF EN 3471 (Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Strip for spring - a ≤ 4,0 mm) | 1 | chevron_right |
| NF EN 3474 NF EN 3474 (Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 3476 NF EN 3476 (Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Softened. Forging stock. a or D ≤ 300 mm) | 2 | chevron_right |
| NF EN 3479 NF EN 3479 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa) | 3 | chevron_right |
| NF EN 3480 NF EN 3480 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Plates - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| NF EN 3481 NF EN 3481 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Hollow bars - 5 mm ≤ a ≤ 12 mm) | 3 | chevron_right |
| NF EN 3482 NF EN 3482 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Forging stock - De ≤ 100 mm) | 3 | chevron_right |
| NF EN 3484 NF EN 3484 (Aerospace series - Steel X5CrNiCuNb16-4 (1.4549 type 1.4542) - As cast - Reference heat treatment: homogenised, solution treated, precipitation hardened and sub zero - Remelting stock) | 3 | chevron_right |
| NF EN 3486 NF EN 3486 (Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Solution annealed and precipitation hardened - 1400 ≤ Rm ≤ 1550 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| NF EN 3487 NF EN 3487 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| NF EN 3488 NF EN 3488 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Sheets and strips - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| NF EN 3489 NF EN 3489 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 ≤ Rm ≤ 750 MPa - Tubes for structures - 0.5 ≤ a ≤ 5 mm) | 3 | chevron_right |
| NF EN 3490 NF EN 3490 (Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted - Hardened and tempered - Bars for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 3 | chevron_right |
| NF EN 3491 NF EN 3491 (Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 2 | chevron_right |
| NF EN 3507 NF EN 3507 (Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa) | 2 | chevron_right |
| NF EN 3510 NF EN 3510 (Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm) | 2 | chevron_right |
| NF EN 3523 NF EN 3523 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars for machining - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa) | 3 | chevron_right |
| NF EN 3524 NF EN 3524 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm ≤ a ≤ 6 mm - 1080 MPa ≤ Rm ≤ 1280 MPa) | 2 | chevron_right |
| NF EN 3525 NF EN 3525 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm ≤ a ≤ 20 mm - 1080 MPa ≤ Rm ≤ 1280 MPa) | 2 | chevron_right |
| NF EN 3526 NF EN 3526 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1180 MPa) | 2 | chevron_right |
| NF EN 3527 NF EN 3527 (Aerospace series - Steel 33CrMoV12 (1.8522) - Air melted - Softened - Forging stock - a or D ≤ 300 mm) | 3 | chevron_right |
| NF EN 3528 NF EN 3528 (Aerospace series. Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 2 | chevron_right |
| NF EN 3529 NF EN 3529 (Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 2 | chevron_right |
| NF EN 3531 NF EN 3531 (Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 3 | chevron_right |
| NF EN 3532 NF EN 3532 (Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 3 | chevron_right |
| NF EN 3552 NF EN 3552 (Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 3553 NF EN 3553 (Aerospace series - Aluminium alloy AL-P2618A - T6511 - Extruded bar and section - a or D ≤ 160 mm) | 1 | chevron_right |
| NF EN 3557 NF EN 3557 (Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications - 0,6 mm ≤ a ≤ 3 mm) | 1 | chevron_right |
| NF EN 3638 NF EN 3638 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets, strips and plates - 0,5 ≤ a ≤ 10 mm) | 3 | chevron_right |
| NF EN 3639 NF EN 3639 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 3 | chevron_right |
| NF EN 3666 NF EN 3666 (Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1550 MPa ≤ Rm ≤ 1830 MPa) | 1 | chevron_right |
| NF EN 3668 NF EN 3668 (Aerospace series. Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9). Non heat treated. Forging stock. a or D ≤ 250 mm) | 2 | chevron_right |
| NF EN 3671 NF EN 3671 (Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D ≤ 250 mm) | 2 | chevron_right |
| NF EN 3677 NF EN 3677 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa) | 3 | chevron_right |
| NF EN 3678 NF EN 3678 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa) | 3 | chevron_right |
| NF EN 3697 NF EN 3697 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD) | 1 | chevron_right |
| NF EN 3698 NF EN 3698 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD) | 1 | chevron_right |
| NF EN 3761 NF EN 3761 (Aerospace series - Heat resisting alloy FE-PA2601 - Softened and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1100 MPa ≤ Rm ≤ 1300 MPa) | 1 | chevron_right |
| NF EN 3762 NF EN 3762 (Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold worked - Wire for forged fasteners - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| NF EN 3813 NF EN 3813 (Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. De ≤ 50 mm) | 2 | chevron_right |
| NF EN 3816 NF EN 3816 (Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened and cold rolled - Sheet and strip a ≤ 3 mm - Rm ≥ 800 MPa) | 2 | chevron_right |
| NF EN 3825 NF EN 3825 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD) | 1 | chevron_right |
| NF EN 3826 NF EN 3826 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD) | 1 | chevron_right |
| NF EN 3827 NF EN 3827 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD) | 1 | chevron_right |
| NF EN 3872 NF EN 3872 (Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a ≤ 200 mm) | 1 | chevron_right |
| NF EN 3882 NF EN 3882 (Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3883 NF EN 3883 (Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3884 NF EN 3884 (Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3885 NF EN 3885 (Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3886 NF EN 3886 (Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3887 NF EN 3887 (Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3888 NF EN 3888 (Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3889 NF EN 3889 (Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3890 NF EN 3890 (Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3892 NF EN 3892 (Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding) | 1 | chevron_right |
| NF EN 3893 NF EN 3893 (Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding) | 1 | chevron_right |
| NF EN 3894 NF EN 3894 (Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3895 NF EN 3895 (Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3896 NF EN 3896 (Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding) | 2 | chevron_right |
| NF EN 3897 NF EN 3897 (Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding) | 2 | chevron_right |
| NF EN 39 NF EN 39 (Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions) | 2 | chevron_right |
| NF EN 3917 NF EN 3917 (Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3918 NF EN 3918 (Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Tape) | 2 | chevron_right |
| NF EN 3919 NF EN 3919 (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| NF EN 3920 NF EN 3920 (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3921 NF EN 3921 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| NF EN 3922 NF EN 3922 (Aerospace series - Nickel base alloy Ni-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| NF EN 3923 NF EN 3923 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3924 NF EN 3924 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| NF EN 3925 NF EN 3925 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| NF EN 3926 NF EN 3926 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| NF EN 3927 NF EN 3927 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3928 NF EN 3928 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| NF EN 3930 NF EN 3930 (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3931 NF EN 3931 (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Tape) | 2 | chevron_right |
| NF EN 3932 NF EN 3932 (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| NF EN 3933 NF EN 3933 (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3934 NF EN 3934 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| NF EN 3935 NF EN 3935 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| NF EN 3936 NF EN 3936 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3937 NF EN 3937 (Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3938 NF EN 3938 (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| NF EN 3939 NF EN 3939 (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3940 NF EN 3940 (Aerospace series - Nickel base alloy NI-B46001 (NiCoSi5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| NF EN 3941 NF EN 3941 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| NF EN 3942 NF EN 3942 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| NF EN 3943 NF EN 3943 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3944 NF EN 3944 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| NF EN 3945 NF EN 3945 (Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3946 NF EN 3946 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3947 NF EN 3947 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| NF EN 3948 NF EN 3948 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Wire) | 2 | chevron_right |
| NF EN 3952 NF EN 3952 (Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire) | 2 | chevron_right |
| NF EN 3953 NF EN 3953 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire) | 2 | chevron_right |
| NF EN 3954 NF EN 3954 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3955 NF EN 3955 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| NF EN 3956 NF EN 3956 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire) | 2 | chevron_right |
| NF EN 3957 NF EN 3957 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3958 NF EN 3958 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| NF EN 3959 NF EN 3959 (Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3960 NF EN 3960 (Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| NF EN 3961 NF EN 3961 (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| NF EN 3962 NF EN 3962 (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire) | 2 | chevron_right |
| NF EN 3963 NF EN 3963 (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Rolled foil) | 1 | chevron_right |
| NF EN 3964 NF EN 3964 (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Wire) | 1 | chevron_right |
| NF EN 3965 NF EN 3965 (Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing - Rolled foil) | 1 | chevron_right |
| NF EN 3969 NF EN 3969 (Aerospace series. Steel FE-PL1507 (40CrMoV12). Air melted. Annealed. Forging stock. a or D ≤ 350 mm) | 2 | chevron_right |
| NF EN 3971 NF EN 3971 (Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm) | 2 | chevron_right |
| NF EN 3972 NF EN 3972 (Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa) | 2 | chevron_right |
| NF EN 3973 NF EN 3973 (Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa) | 2 | chevron_right |
| NF EN 3979 NF EN 3979 (Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 3982 NF EN 3982 (Aerospace series - Aluminium alloy AL-P7050 - AlZn6CuMgZr - T7451 - Plates - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| NF EN 3983 NF EN 3983 (Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| NF EN 3997 NF EN 3997 (Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T3 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 3998 NF EN 3998 (Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 3999 NF EN 3999 (Aerospace series - Aluminium alloy AL-P2024-T351 - Sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4001 NF EN 4001 (Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4002 NF EN 4002 (Aerospace series. Aluminium alloy AL-P2219-T81. Sheet and strip 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4003 NF EN 4003 (Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4004 NF EN 4004 (Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4005 NF EN 4005 (Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4006 NF EN 4006 (Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4007 NF EN 4007 (Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4085 NF EN 4085 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| NF EN 4098 NF EN 4098 (Aerospace series - Steel 40CrMoV12 (1.8523) - Consumable electrode remelted - Hardened and tempered - Forgings - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa) | 3 | chevron_right |
| NF EN 4099 NF EN 4099 (Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4100 NF EN 4100 (Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4101 NF EN 4101 (Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4102 NF EN 4102 (Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4103 NF EN 4103 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| NF EN 4104 NF EN 4104 (Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing - Powder or paste) | 1 | chevron_right |
| NF EN 4105 NF EN 4105 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape) | 2 | chevron_right |
| NF EN 4202 NF EN 4202 (Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm < a ≤ 25 mm) | 1 | chevron_right |
| NF EN 4203 NF EN 4203 (Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4204 NF EN 4204 (Aerospace series - Aluminium alloy AL-P8090 - T841 - Sheet - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4209 NF EN 4209 (Aerospace series - Aluminium alloy AL-P2219-T851 - Plate - 6 mm < a ≤ 50 mm) | 1 | chevron_right |
| NF EN 4211 NF EN 4211 (Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6 mm < a ≤ 25 mm) | 1 | chevron_right |
| NF EN 4212 NF EN 4212 (Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| NF EN 4213 NF EN 4213 (Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| NF EN 4214 NF EN 4214 (Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm < a ≤ 20 mm) | 1 | chevron_right |
| NF EN 4215 NF EN 4215 (Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| NF EN 4216 NF EN 4216 (Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa) | 2 | chevron_right |
| NF EN 4244 NF EN 4244 (Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D 200 mm - 1 000 MPa Rm 1 140 MPa) | 1 | chevron_right |
| NF EN 4245 NF EN 4245 (Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - As forged - Forging stock - De 300 mm) | 1 | chevron_right |
| NF EN 4247 NF EN 4247 (Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm < a ≤ 140 mm) | 1 | chevron_right |
| NF EN 4250 NF EN 4250 (Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| NF EN 4262 NF EN 4262 (Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880 MPa) | 2 | chevron_right |
| NF EN 4263 NF EN 4263 (Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960 MPa) | 2 | chevron_right |
| NF EN 4264 NF EN 4264 (Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 - As forged - Forging stock - a or D ≤ 200 mm) | 2 | chevron_right |
| NF EN 4283 NF EN 4283 (Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm < a ≤ 40 mm) | 1 | chevron_right |
| NF EN 4286 NF EN 4286 (Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a ≤ 125 mm) | 1 | chevron_right |
| NF EN 4287 NF EN 4287 (Aerospace series - Aluminium alloy AL-P7010 - Forging stock) | 1 | chevron_right |
| NF EN 4289 NF EN 4289 (Aerospace series - Aluminium alloy AL-P7175- Forging stock) | 1 | chevron_right |
| NF EN 4291 NF EN 4291 (Aerospace series - Aluminium alloy AL-P8090 - Forging stock) | 1 | chevron_right |
| NF EN 4292 NF EN 4292 (Aerospace series - Aluminium alloy AL-R39002 - Forging stock) | 1 | chevron_right |
| NF EN 4293 NF EN 4293 (Aerospce series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D ≤ 150 mm) | 1 | chevron_right |
| NF EN 4313 NF EN 4313 (Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4314 NF EN 4314 (Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4680) - Consumable electrode remelted - Not heat treated - Forging stock - a or D ≤ 250 mm) | 3 | chevron_right |
| NF EN 4315 NF EN 4315 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - a or D ≤ 100 mm - Rm ≥ 900 MPa) | 3 | chevron_right |
| NF EN 4317 NF EN 4317 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Not heat treated - Forging stock - a or D ≤ 200 mm) | 3 | chevron_right |
| NF EN 4318 NF EN 4318 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm - Rm ≥ 960 MPa) | 3 | chevron_right |
| NF EN 4324 NF EN 4324 (Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod) | 1 | chevron_right |
| NF EN 4325 NF EN 4325 (Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4326 NF EN 4326 (Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4327 NF EN 4327 (Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4328 NF EN 4328 (Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4329 NF EN 4329 (Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4330 NF EN 4330 (Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4331 NF EN 4331 (Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4332 NF EN 4332 (Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4333 NF EN 4333 (Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4334 NF EN 4334 (Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4335 NF EN 4335 (Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4336 NF EN 4336 (Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4337 NF EN 4337 (Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn3) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4338 NF EN 4338 (Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4339 NF EN 4339 (Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4340 NF EN 4340 (Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| NF EN 4341 NF EN 4341 (Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| NF EN 4342 NF EN 4342 (Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| NF EN 4343 NF EN 4343 (Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4344 NF EN 4344 (Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4346 NF EN 4346 (Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm) | 2 | chevron_right |
| NF EN 4347 NF EN 4347 (Aerospace series Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm) | 2 | chevron_right |
| NF EN 4372 NF EN 4372 (Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D ≤ 10 mm) | 2 | chevron_right |
| NF EN 4373 NF EN 4373 (Aerospace series. Heat resisting alloy NI-PD9001 (NiCu31). Annealed, seamless tube D ≤ 75 mm, a ≤ 3 mm) | 2 | chevron_right |
| NF EN 4374 NF EN 4374 (Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - De ≤ 200 mm) | 2 | chevron_right |
| NF EN 4376 NF EN 4376 (Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated - Bar and section, De ≤ 200 mm) | 2 | chevron_right |
| NF EN 4377 NF EN 4377 (Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| NF EN 4379 NF EN 4379 (Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De ≤ 200 mm) | 2 | chevron_right |
| NF EN 4382 NF EN 4382 (Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D ≤ 50 mm, a ≤ 3 mm) | 2 | chevron_right |
| NF EN 4383 NF EN 4383 (Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock) | 2 | chevron_right |
| NF EN 4384 NF EN 4384 (Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock) | 2 | chevron_right |
| NF EN 440 NF EN 440 (Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification) | 10 | chevron_right |
| NF EN 4449 NF EN 4449 (Aerospace series - Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4450 NF EN 4450 (Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| NF EN 4461 NF EN 4461 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa) | 2 | chevron_right |
| NF EN 4462 NF EN 4462 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa) | 2 | chevron_right |
| NF EN 4463 NF EN 4463 (Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| NF EN 4464 NF EN 4464 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 200 MPa) | 2 | chevron_right |
| NF EN 4465 NF EN 4465 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 300 MPa) | 2 | chevron_right |
| NF EN 4466 NF EN 4466 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 400 MPa) | 2 | chevron_right |
| NF EN 4467 NF EN 4467 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa) | 2 | chevron_right |
| NF EN 4468 NF EN 4468 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa) | 2 | chevron_right |
| NF EN 4469 NF EN 4469 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| NF EN 4470 NF EN 4470 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1200 MPa) | 2 | chevron_right |
| NF EN 4471 NF EN 4471 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1300 MPa) | 2 | chevron_right |
| NF EN 4472 NF EN 4472 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| NF EN 4528 NF EN 4528 (Aerospace series. Steel FE-PA 3903 (X10CrNi18-8) - Cold rolled - Strip for springs. a ≤ 3 mm. 1250 MPa ≤ Rm ≤ 1640 MPa) | 2 | chevron_right |
| NF EN 4566 NF EN 4566 (Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| NF EN 4570 NF EN 4570 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 Solution treated Forgings De ≤ 100 mm) | 2 | chevron_right |
| NF EN 4571 NF EN 4571 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Bars and sections - De = 100 mm) | 2 | chevron_right |
| NF EN 4572 NF EN 4572 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Sheets and strips - a ≤ 3 mm) | 2 | chevron_right |
| NF EN 4573 NF EN 4573 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm) | 2 | chevron_right |
| NF EN 4574 NF EN 4574 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| NF EN 4575 NF EN 4575 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and descaled - Sheets and plates - 3 mm < a ≤ 50 mm) | 2 | chevron_right |
| NF EN 4615 NF EN 4615 (Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting) | 1 | chevron_right |
| NF EN 4616 NF EN 4616 (Aerospace series - Magnesium alloy MG-C18002 - T4 - Chill casting) | 1 | chevron_right |
| NF EN 4627 NF EN 4627 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 3 | chevron_right |
| NF EN 4628 NF EN 4628 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| NF EN 4629 NF EN 4629 (Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De ≤ 300 mm) | 2 | chevron_right |
| NF EN 4630 NF EN 4630 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 3 | chevron_right |
| NF EN 4631 NF EN 4631 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 3 | chevron_right |
| NF EN 4642 NF EN 4642 (Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 2 | chevron_right |
| NF EN 4655 NF EN 4655 (Aerospace series. Steel FEPM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| NF EN 4656 NF EN 4656 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1520 MPa) | 2 | chevron_right |
| NF EN 4657 NF EN 4657 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation remelted - Bars - a or D < 200 mm - Rm > 1 650 MPa) | 2 | chevron_right |
| NF EN 4658 NF EN 4658 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 520 MPa) | 2 | chevron_right |
| NF EN 4659 NF EN 4659 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 650 Mpa) | 2 | chevron_right |
| NF EN 4670 NF EN 4670 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| NF EN 4671 NF EN 4671 (Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1400 MPa) | 2 | chevron_right |
| NF EN 4672 NF EN 4672 (Aerospace series - Steel FE-PM1504 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| NF EN 4675 NF EN 4675 (Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Bars - De < 110 mm) | 2 | chevron_right |
| NF EN 4683 NF EN 4683 (Aerospace series - Steel FE-WM 3504 (X4CrNiMo16-5-1) - Air melted - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| NF EN 4685 NF EN 4685 (Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 mm - Rm ≥ 1 240 MPa) | 1 | chevron_right |
| NF EN 4720 NF EN 4720 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| NF EN 4721 NF EN 4721 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 2 | chevron_right |
| NF EN 4725 NF EN 4725 (Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm < a ≤ 150 mm) | 1 | chevron_right |
| NF EN 4825 NF EN 4825 (Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consumable electrode remelted - Hardened and tempered - Bars - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1100 MPa) | 2 | chevron_right |
| NF EN 4842 NF EN 4842 (Aerospace series - X5CrNiCu15-5 (1.4545)- Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining, a or D ≤ 250 mm, 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)) | 2 | chevron_right |
| NF EN 485-2 NF EN 485-2 (Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties) | 110 | chevron_right |
| NF EN 486 NF EN 486 (Aluminium and aluminium alloys - Extrusion ingots - Specifications) | 444 | chevron_right |
| NF EN 487 NF EN 487 (Aluminium and aluminium alloys - Rolling ingots - Specifications) | 184 | chevron_right |
| NF EN 4882 NF EN 4882 (Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa) | 2 | chevron_right |
| NF EN 4883 NF EN 4883 (Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Plates - 6 mm ≤ a ≤ 100 mm - Rm ≥ 1 070 MPa) | 2 | chevron_right |
| NF EN 4884 NF EN 4884 (Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa) | 2 | chevron_right |
| NF EN 4890 NF EN 4890 (Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1050 MPa) | 1 | chevron_right |
| NF EN 4900 NF EN 4900 (Aerospace series - Aluminium alloy 5086 - H111 - Extruded bars - 10 mm ≤ D ≤ 300 mm) | 1 | chevron_right |
| NF EN 4904 NF EN 4904 (Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa - Bars - 100 mm ≤ D ≤ 250 mm) | 2 | chevron_right |
| NF EN 499 NF EN 499 (Welding consumables - Covered electrodes for manual metal arc welding of non alloy and fine grain steels) | 7 | chevron_right |
| NF EN 50149 NF EN 50149 (Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires) | 20 | chevron_right |
| NF EN 50183 NF EN 50183 (Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires) | 6 | chevron_right |
| NF EN 50189 NF EN 50189 (Conductors for overhead lines. Zinc coated steel wires) | 6 | chevron_right |
| NF EN 50307 NF EN 50307 (Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables) | 23 | chevron_right |
| NF EN 541 NF EN 541 (Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications) | 22 | chevron_right |
| NF EN 546-2 NF EN 546-2 (Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties) | 22 | chevron_right |
| NF EN 549 NF EN 549 (Rubber materials for seals and diaphragms for gas appliances and gas equipment) | 60 | chevron_right |
| NF EN 570 NF EN 570 (Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification) | 47 | chevron_right |
| NF EN 573-3 NF EN 573-3 (Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products) | 454 | chevron_right |
| NF EN 575 NF EN 575 (Aluminium and aluminium alloys - Master alloys produced by melting - Specifications) | 100 | chevron_right |
| NF EN 576 NF EN 576 (Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications) | 54 | chevron_right |
| NF EN 586-2 NF EN 586-2 (Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements) | 12 | chevron_right |
| NF EN 601 NF EN 601 (Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff) | 1 | chevron_right |
| NF EN 602 NF EN 602 (Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff) | 1 | chevron_right |
| NF EN 603-2 NF EN 603-2 (Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties) | 18 | chevron_right |
| NF EN 60454-3-1 NF EN 60454-3-1 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3-1: Specifications for individual materials - PVC film tapes with pressure-sensitive adhesive) | 12 | chevron_right |
| NF EN 60454-3-11 NF EN 60454-3-11 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives) | 13 | chevron_right |
| NF EN 60454-3-12 NF EN 60454-3-12 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive) | 9 | chevron_right |
| NF EN 60454-3-14 NF EN 60454-3-14 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive) | 5 | chevron_right |
| NF EN 60454-3-19 NF EN 60454-3-19 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides) | 4 | chevron_right |
| NF EN 60454-3-2 NF EN 60454-3-2 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives) | 8 | chevron_right |
| NF EN 60454-3-4 NF EN 60454-3-4 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive) | 2 | chevron_right |
| NF EN 60454-3-7 NF EN 60454-3-7 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive) | 4 | chevron_right |
| NF EN 60454-3-8 NF EN 60454-3-8 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fiber) | 5 | chevron_right |
| NF EN 60672-3 NF EN 60672-3 (Ceramic and glass-insulating materials - Part 3: Specifications for individual materials) | 54 | chevron_right |
| NF EN 60674-3-1 NF EN 60674-3-1 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors) | 12 | chevron_right |
| NF EN 60674-3-4 to 6 NF EN 60674-3-4 to 6 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation) | 12 | chevron_right |
| NF EN 60674-3-7 NF EN 60674-3-7 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation) | 3 | chevron_right |
| NF EN 60674-3-8 NF EN 60674-3-8 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation) | 3 | chevron_right |
| NF EN 60893-3-2 NF EN 60893-3-2 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins) | 20 | chevron_right |
| NF EN 60893-3-3 NF EN 60893-3-3 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 606893-3-3)) | 2 | chevron_right |
| NF EN 60893-3-4 NF EN 60893-3-4 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4)) | 18 | chevron_right |
| NF EN 60893-3-5 NF EN 60893-3-5 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins) | 5 | chevron_right |
| NF EN 60893-3-6 NF EN 60893-3-6 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins) | 2 | chevron_right |
| NF EN 60893-3-7 NF EN 60893-3-7 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimid resins) | 1 | chevron_right |
| NF EN 610 NF EN 610 (Tin and tin alloys - Ingot tin) | 5 | chevron_right |
| NF EN 611-1 NF EN 611-1 (Tin and tin alloys - Pewter and pewterware - Part 1: Pewter) | 6 | chevron_right |
| NF EN 611-2 NF EN 611-2 (Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware) | 3 | chevron_right |
| NF EN 61212-3-1 NF EN 61212-3-1 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes) | 15 | chevron_right |
| NF EN 61212-3-2 NF EN 61212-3-2 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated molded tubes) | 6 | chevron_right |
| NF EN 61212-3-3 NF EN 61212-3-3 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated molded rods) | 11 | chevron_right |
| NF EN 61249-2-1 NF EN 61249-2-1 (Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad) | 3 | chevron_right |
| NF EN 61249-2-10 NF EN 61249-2-10 (Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| NF EN 61249-2-11 NF EN 61249-2-11 (Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| NF EN 61249-2-2 NF EN 61249-2-2 (Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad) | 4 | chevron_right |
| NF EN 61249-2-21 NF EN 61249-2-21 (Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| NF EN 61249-2-22 NF EN 61249-2-22 (Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| NF EN 61249-2-23 NF EN 61249-2-23 (Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad) | 3 | chevron_right |
| NF EN 61249-2-26 NF EN 61249-2-26 (Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| NF EN 61249-2-27 NF EN 61249-2-27 (Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| NF EN 61249-2-30 NF EN 61249-2-30 (Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| NF EN 61249-2-35 NF EN 61249-2-35 (Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| NF EN 61249-2-36 NF EN 61249-2-36 (Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| NF EN 61249-2-37 NF EN 61249-2-37 (Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| NF EN 61249-2-38 NF EN 61249-2-38 (Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| NF EN 61249-2-39 NF EN 61249-2-39 (Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| NF EN 61249-2-40 NF EN 61249-2-40 (Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| NF EN 61249-2-41 NF EN 61249-2-41 (Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| NF EN 61249-2-42 NF EN 61249-2-42 (Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| NF EN 61249-2-43 NF EN 61249-2-43 (Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| NF EN 61249-2-44 NF EN 61249-2-44 (Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| NF EN 61249-2-5 NF EN 61249-2-5 (Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core / woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| NF EN 61249-2-6 NF EN 61249-2-6 (Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| NF EN 61249-2-8 NF EN 61249-2-8 (Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| NF EN 61249-2-9 NF EN 61249-2-9 (Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| NF EN 622-2 NF EN 622-2 (Fibreboards - Specifications - Part 2: Requirements for hardboards) | 6 | chevron_right |
| NF EN 622-3 NF EN 622-3 (Fibreboards - Specifications - Part 3: Requirements for medium boards) | 10 | chevron_right |
| NF EN 622-4 NF EN 622-4 (Fibreboards - Specifications - Part 4: Requirements for softboards) | 5 | chevron_right |
| NF EN 622-5 NF EN 622-5 (Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)) | 9 | chevron_right |
| NF EN 683-2 NF EN 683-2 (Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties) | 26 | chevron_right |
| NF EN 754-2 NF EN 754-2 (Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties) | 100 | chevron_right |
| NF EN 755-2 NF EN 755-2 (Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties) | 140 | chevron_right |
| NF EN 756 NF EN 756 (Welding consumables - Solid wire, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels) | 34 | chevron_right |
| NF EN 757 NF EN 757 (Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification) | 9 | chevron_right |
| NF EN 758 NF EN 758 (Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels) | 8 | chevron_right |
| NF EN 988 NF EN 988 (Zinc and zinc alloys - Specifications for rolled flat products for building) | 1 | chevron_right |
| NF EN IEC 60674-3-2 NF EN IEC 60674-3-2 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation) | 5 | chevron_right |
| NF EN IEC 60674-3-3 NF EN IEC 60674-3-3 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation) | 6 | chevron_right |
| NF EN IEC 60674-3-4 NF EN IEC 60674-3-4 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4: Polyimide films used for electrical insulation) | 7 | chevron_right |
| NF EN IEC 61249-2-45 NF EN IEC 61249-2-45 (Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| NF EN IEC 61249-2-46 NF EN IEC 61249-2-46 (Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| NF EN IEC 61249-2-47 NF EN IEC 61249-2-47 (Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2.0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| NF EN ISO 10081-1 NF EN ISO 10081-1 (Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003)) | 13 | chevron_right |
| NF EN ISO 10081-2 NF EN ISO 10081-2 (Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon (ISO 10081-2:2003)) | 36 | chevron_right |
| NF EN ISO 10081-3 NF EN ISO 10081-3 (Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 50% residual carbon (ISO 10081-3:2003)) | 96 | chevron_right |
| NF EN ISO 10081-4 NF EN ISO 10081-4 (Classification of dense shaped refractory products - Part 4: Special products (ISO 10081-4:2014)) | 175 | chevron_right |
| NF EN ISO 10366-1 NF EN ISO 10366-1 (Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002)) | 11 | chevron_right |
| NF EN ISO 1071 NF EN ISO 1071 (Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification) | 41 | chevron_right |
| NF EN ISO 11542-1 NF EN ISO 11542-1 (Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001)) | 9 | chevron_right |
| NF EN ISO 1163-1 NF EN ISO 1163-1 (Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995)) | 24 | chevron_right |
| NF EN ISO 11833-1 NF EN ISO 11833-1 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)) | 24 | chevron_right |
| NF EN ISO 11833-2 NF EN ISO 11833-2 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)) | 7 | chevron_right |
| NF EN ISO 11960 NF EN ISO 11960 (Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells) | 24 | chevron_right |
| NF EN ISO 11961 NF EN ISO 11961 (Petroleum and natural gas industries - Steel drill pipe) | 16 | chevron_right |
| NF EN ISO 11963 NF EN ISO 11963 (Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2019)) | 14 | chevron_right |
| NF EN ISO 12153 NF EN ISO 12153 (Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification) | 21 | chevron_right |
| NF EN ISO 12683 NF EN ISO 12683 (Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004)) | 27 | chevron_right |
| NF EN ISO 13085 NF EN ISO 13085 (Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells (ISO 13085:2014)) | 4 | chevron_right |
| NF EN ISO 13356 NF EN ISO 13356 (Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO 13356:2015)) | 1 | chevron_right |
| NF EN ISO 13680 NF EN ISO 13680 (Oil and gas industries including lower carbon energy - Corrosion - resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material -Technical delivery conditions) | 101 | chevron_right |
| NF EN ISO 14172 NF EN ISO 14172 (Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015)) | 51 | chevron_right |
| NF EN ISO 14343 NF EN ISO 14343 (Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification) | 125 | chevron_right |
| NF EN ISO 1456 NF EN ISO 1456 (Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium) | 382 | chevron_right |
| NF EN ISO 14631 NF EN ISO 14631 (Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:2021)) | 3 | chevron_right |
| NF EN ISO 14632 NF EN ISO 14632 (Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021)) | 4 | chevron_right |
| NF EN ISO 15013 NF EN ISO 15013 (Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007)) | 7 | chevron_right |
| NF EN ISO 15015 NF EN ISO 15015 (Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)) | 4 | chevron_right |
| NF EN ISO 15527 NF EN ISO 15527 (Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018)) | 4 | chevron_right |
| NF EN ISO 15546 NF EN ISO 15546 (Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011)) | 4 | chevron_right |
| NF EN ISO 16120-2 NF EN ISO 16120-2 (Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod) | 60 | chevron_right |
| NF EN ISO 16120-3 NF EN ISO 16120-3 (Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod) | 6 | chevron_right |
| NF EN ISO 16120-4 NF EN ISO 16120-4 (Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications) | 68 | chevron_right |
| NF EN ISO 1622-1 NF EN ISO 1622-1 (Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:2012)) | 7 | chevron_right |
| NF EN ISO 16834 NF EN ISO 16834 (Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)) | 47 | chevron_right |
| NF EN ISO 17633 NF EN ISO 17633 (Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2025)) | 94 | chevron_right |
| NF EN ISO 17634 NF EN ISO 17634 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)) | 23 | chevron_right |
| NF EN ISO 17672 NF EN ISO 17672 (Brazing - Filler metals) | 148 | chevron_right |
| NF EN ISO 17777 NF EN ISO 17777 (Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification) | 46 | chevron_right |
| NF EN ISO 18273 NF EN ISO 18273 (Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification) | 70 | chevron_right |
| NF EN ISO 18274 NF EN ISO 18274 (Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification) | 74 | chevron_right |
| NF EN ISO 18276 NF EN ISO 18276 (Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification (ISO 18276:2017)) | 28 | chevron_right |
| NF EN ISO 1872-1 NF EN ISO 1872-1 (Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993)) | 59 | chevron_right |
| NF EN ISO 1873-1 NF EN ISO 1873-1 (Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995)) | 18 | chevron_right |
| NF EN ISO 1874-1 NF EN ISO 1874-1 (Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1874-1:2010)) | 522 | chevron_right |
| NF EN ISO 19288 NF EN ISO 19288 (Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification) | 28 | chevron_right |
| NF EN ISO 19598 NF EN ISO 19598 (Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment) | 19 | chevron_right |
| NF EN ISO 20378 NF EN ISO 20378 (Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification) | 10 | chevron_right |
| NF EN ISO 2081 NF EN ISO 2081 (Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel) | 18 | chevron_right |
| NF EN ISO 2082 NF EN ISO 2082 (Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017)) | 18 | chevron_right |
| NF EN ISO 21305-1 NF EN ISO 21305-1 (Plastics - Polycarbonate (PC) molding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019)) | 7 | chevron_right |
| NF EN ISO 2179 NF EN ISO 2179 (Electroplated coatings of tin-nickel alloy - Specification and test methods (ISO 2179:1986)) | 4 | chevron_right |
| NF EN ISO 22068 NF EN ISO 22068 (Sintered-metal injection-moulded materials - Specifications) | 36 | chevron_right |
| NF EN ISO 24023-1 NF EN ISO 24023-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials, Part 1: Designation system and basis for specifications) | 2 | chevron_right |
| NF EN ISO 24034 NF EN ISO 24034 (Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification) | 72 | chevron_right |
| NF EN ISO 24373 NF EN ISO 24373 (Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification) | 56 | chevron_right |
| NF EN ISO 2560 NF EN ISO 2560 (Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification) | 96 | chevron_right |
| NF EN ISO 2580-1 NF EN ISO 2580-1 (Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002)) | 41 | chevron_right |
| NF EN ISO 26304 NF EN ISO 26304 (Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification) | 62 | chevron_right |
| NF EN ISO 2702 NF EN ISO 2702 (Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)) | 12 | chevron_right |
| NF EN ISO 28941-1 NF EN ISO 28941-1 (Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 28941-1:2008)) | 20 | chevron_right |
| NF EN ISO 2897-1 NF EN ISO 2897-1 (Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997)) | 12 | chevron_right |
| NF EN ISO 2898-1 NF EN ISO 2898-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996)) | 2 | chevron_right |
| NF EN ISO 29988-1 NF EN ISO 29988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 29988-1:2019)) | 22 | chevron_right |
| NF EN ISO 3183 NF EN ISO 3183 (Petroleum and natural gas industries - Steel pipe for pipeline transportation systems) | 220 | chevron_right |
| NF EN ISO 3506-1 NF EN ISO 3506-1 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)) | 40 | chevron_right |
| NF EN ISO 3506-2 NF EN ISO 3506-2 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes) | 80 | chevron_right |
| NF EN ISO 3506-3 NF EN ISO 3506-3 (Fasteners - Mechanical properties of corrosion resistant stainless steel fasteners - Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes) | 16 | chevron_right |
| NF EN ISO 3506-4 NF EN ISO 3506-4 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws with specified grades and hardness classes) | 28 | chevron_right |
| NF EN ISO 3506-5 NF EN ISO 3506-5 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications) | 9 | chevron_right |
| NF EN ISO 3506-6 NF EN ISO 3506-6 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)) | 41 | chevron_right |
| NF EN ISO 3506-7 NF EN ISO 3506-7 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 7: Flat washers with specified grades and property classes) | 18 | chevron_right |
| NF EN ISO 4042 NF EN ISO 4042 (Fasteners - Electroplated coating systems (ISO 4042:2022)) | 72 | chevron_right |
| NF EN ISO 4613-1 NF EN ISO 4613-1 (Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993)) | 52 | chevron_right |
| NF EN ISO 4894-1 NF EN ISO 4894-1 (Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997)) | 3 | chevron_right |
| NF EN ISO 4957 NF EN ISO 4957 (Tool steels) | 96 | chevron_right |
| NF EN ISO 5451 NF EN ISO 5451 (Ferrovanadium - Specification and conditions of delivery) | 6 | chevron_right |
| NF EN ISO 5755 NF EN ISO 5755 (Sintered metal materials. Specifications (ISO 5755:2022)) | 205 | chevron_right |
| NF EN ISO 5832-1 NF EN ISO 5832-1 (Implants for surgery - Metallic materials - Part 1: Wrought stainless steel) | 1 | chevron_right |
| NF EN ISO 5832-2 NF EN ISO 5832-2 (Implants for surgery - Metallic materials - Part 2: Unalloyed titanium) | 6 | chevron_right |
| NF EN ISO 5832-3 NF EN ISO 5832-3 (Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy) | 2 | chevron_right |
| NF EN ISO 5832-6 NF EN ISO 5832-6 (Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:2022)) | 1 | chevron_right |
| NF EN ISO 5832-7 NF EN ISO 5832-7 (Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy) | 1 | chevron_right |
| NF EN ISO 636 NF EN ISO 636 (Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification) | 37 | chevron_right |
| NF EN ISO 6402-1 NF EN ISO 6402-1 (Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 6402-1:2002)) | 25 | chevron_right |
| NF EN ISO 6501 NF EN ISO 6501 (Ferronickel - Specification and delivery requirements) | 5 | chevron_right |
| NF EN ISO 683-1 NF EN ISO 683-1 (Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering) | 28 | chevron_right |
| NF EN ISO 683-17 NF EN ISO 683-17 (Heat-treatable steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels) | 73 | chevron_right |
| NF EN ISO 683-2 NF EN ISO 683-2 (Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering) | 50 | chevron_right |
| NF EN ISO 683-3 NF EN ISO 683-3 (Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels) | 72 | chevron_right |
| NF EN ISO 683-4 NF EN ISO 683-4 (Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels) | 21 | chevron_right |
| NF EN ISO 683-5 NF EN ISO 683-5 (Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels) | 11 | chevron_right |
| NF EN ISO 683-7 NF EN ISO 683-7 (Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels) | 167 | chevron_right |
| NF EN ISO 6848 NF EN ISO 6848 (Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)) | 11 | chevron_right |
| NF EN ISO 6931-1 NF EN ISO 6931-1 (Stainless steels for springs - Part 1:Wire) | 16 | chevron_right |
| NF EN ISO 7153-1 NF EN ISO 7153-1 (Surgical instruments - Materials - Part 1: Metals) | 50 | chevron_right |
| NF EN ISO 7391-1 NF EN ISO 7391-1 (Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 60 | chevron_right |
| NF EN ISO 7792-1 NF EN ISO 7792-1 (Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7792-1:2012)) | 225 | chevron_right |
| NF EN ISO 7823-1 NF EN ISO 7823-1 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)) | 1 | chevron_right |
| NF EN ISO 7823-2 NF EN ISO 7823-2 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)) | 1 | chevron_right |
| NF EN ISO 7823-3 NF EN ISO 7823-3 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2001)) | 1 | chevron_right |
| NF EN ISO 8257-1 NF EN ISO 8257-1 (Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998)) | 37 | chevron_right |
| NF EN ISO 898-1 NF EN ISO 898-1 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013)) | 10 | chevron_right |
| NF EN ISO 898-2 NF EN ISO 898-2 (Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)) | 7 | chevron_right |
| NF EN ISO 898-3 NF EN ISO 898-3 (Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes) | 4 | chevron_right |
| NF EN ISO 898-5 NF EN ISO 898-5 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread) | 4 | chevron_right |
| NF EN ISO 898-6 NF EN ISO 898-6 (Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread) | 7 | chevron_right |
| NF EN ISO 8986-1 NF EN ISO 8986-1 (Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:2009)) | 16 | chevron_right |
| NF EN ISO 9351 NF EN ISO 9351 (Galvanic anodes for cathodic protection in seawater and saline sediments) | 13 | chevron_right |
| NF EN ISO 9453 NF EN ISO 9453 (Soft solder alloys - Chemical compositions and forms) | 177 | chevron_right |
| NF EN ISO 9717 NF EN ISO 9717 (Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)) | 3 | chevron_right |
| NF EN ISO 9988-1 NF EN ISO 9988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 9988-1:2004)) | 97 | chevron_right |
| NF ENV 10080 NF ENV 10080 (Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric) | 4 | chevron_right |
| NF F 80-102 NF F 80-102 (Rolling stock. Recommended steels for rolling stock construction. II : Structural steels for general purposes) | 7 | chevron_right |
| NF F 80-103 NF F 80-103 (Rolling stock. Recommended steels for rolling stock construction. III : Structural steels with improved atmospheric corrosion resistance. Copper steels) | 3 | chevron_right |
| NF F 80-104 NF F 80-104 (Railway transport equipment. Recommended steels for railway rolling-stock construction. IV : steels for plates for pressure vessels and highly stressed parts) | 3 | chevron_right |
| NF F 80-105 NF F 80-105 (Railway transport equipment. Recommended steels for railway rolling-stock construction. V : unalloyed forging steels suitable for heat treatment) | 6 | chevron_right |
| NF F 80-106 NF F 80-106 (Rolling stock. Recommended steels for rolling stock construction. VI: cold forming steels) | 11 | chevron_right |
| NF F 80-107 NF F 80-107 (Rolling stock. Recommended steels for stock construction. VII: unalloyed and alloy heat treated steels) | 23 | chevron_right |
| NF F 80-108 NF F 80-108 (Railway transport equipment. Recommended steels for railway rolling-stock construction. VIII: spring steels) | 8 | chevron_right |
| NF F 80-109 NF F 80-109 (Rolling stock. Recommanded steels for rolling stock construction. IX: stainless steels for general purposes) | 7 | chevron_right |
| NF F 80-111 NF F 80-111 (Railway rolling stock. Recommended steels for rolling stock construction. XI : weldable high yield strength micro-alloyed steels with atmospheric corrosion resistance for bodyworks) | 10 | chevron_right |
| NF ISO 4381 NF ISO 4381 (Tin casting alloys for multilayer plain bearings) | 5 | chevron_right |
| NF ISO 4382-1 NF ISO 4382-1 (Cast copper alloys for solid and multilayer thick-walled plain bearings) | 4 | chevron_right |
| NF J13-005 NF J13-005 (Shipbuilding. Aluminium and aluminium alloys. Rolled and drawn products. List of useable alloys) | 14 | chevron_right |
| NF L14-052 NF L14-052 (Aerospace series; Aluminium alloy al-P3103-, H 16) | 1 | chevron_right |
| NF L14-053 NF L14-053 (Aerospace series - Aluminium alloy Al-P6082-, T4 or T42 sheet and strip in thicknesses of 0.4 to 6 mm) | 1 | chevron_right |
| NF L14-054 NF L14-054 (Aerospaces series - Aluminium alloy AL-P6082-, T6 or T62 sheet and strip in thicknesses of 0.4 to 6 mm) | 1 | chevron_right |
| NF L14-218 NF L14-218 (Aerospaces series; Aluminium alloy AL-P2024- T81) | 1 | chevron_right |
| NF L14-220 NF L14-220 (Aerospace series; Aluminium alloy Al-P2024-T3) | 1 | chevron_right |
| NF L14-221 NF L14-221 (Aerospace series; Aluminium alloy Al-P2024-T42) | 1 | chevron_right |
| NF L14-222 NF L14-222 (Aerospace series; Aluminium alloy Al-P2024- T4) | 1 | chevron_right |
| NF L14-310 NF L14-310 (Aerospace series; Aluminium alloy Al-P5052-0) | 1 | chevron_right |
| NF L14-407 NF L14-407 (Aluminium alloy Al-P2219- T6 oder T62) | 2 | chevron_right |
| NF L14-408 NF L14-408 (Aluminium alloy Al-P2219- T6 or T62) | 1 | chevron_right |
| NF L14-409 NF L14-409 (Aerospace series - Aluminium alloy AL-P2219- T81) | 2 | chevron_right |
| NF L14-601 NF L14-601 (Titanium and titanium alloys TA6V (P.Q) forging stock solution treated and annealed for aerospace use) | 1 | chevron_right |
| NF L14-602 NF L14-602 (Titanium and titanium alloys TA6V (P.Q) forgings solution treated and annealed for aerospace use) | 1 | chevron_right |
| NF L14-603 NF L14-603 (Titanium and titanium alloys TA6V (P.Q) forging stock annealed for aerospace use) | 1 | chevron_right |
| NF L14-604 NF L14-604 (Titanium and titanium alloys TA6V (P.Q) forgings annealed for aerospace use) | 1 | chevron_right |
| NF L14-611 NF L14-611 (Titanium and titanium alloys TA6ZR5D forging stock solution treated and aged for aerospace use) | 1 | chevron_right |
| NF L14-612 NF L14-612 (Titanium and titanium alloys TA6ZR5D forgings solution treated and aged for aerospace use) | 1 | chevron_right |
| NF L14-634 NF L14-634 (Aerospace series; Titanium alloy Ti-P19001 - Annealed - Sheet and strip, hot rolled, a inferior or equal to 6 mm) | 1 | chevron_right |
| NF L14-635 NF L14-635 (Aerospace series; Titanium alloy Ti-P19001 - Annealed - Sheet and strip, cold rolled, a inferior or equal to 6 mm) | 1 | chevron_right |
| NF L14-636 NF L14-636 (Aerospace series; Titanium alloy Ti-P19001 - Solution treated and aged - Sheet and strip, hot rolled a inferior or equal to 6 mm) | 1 | chevron_right |
| NF L14-637 NF L14-637 (Aerospace series; Titanium alloy Ti-P19001 - Solution treated and aged - Sheet and strip, cold rolled a inferior or equal to 6 mm) | 1 | chevron_right |
| NF L14-701 NF L14-701 (Copper alloy CuNi3Si - bars for aerospace use) | 1 | chevron_right |
| NF L14-702 NF L14-702 (Copper alloy bars (CuNi14Al2) for aerospace construction) | 1 | chevron_right |
| NF L14-703 NF L14-703 (Copper alloy CuSn8.5P - bars for aerospace use) | 1 | chevron_right |
| NF L14-705 NF L14-705 (Copper alloy CuAl10Ni5Fe4 bars for aerospace use) | 1 | chevron_right |
| NF L14-706 NF L14-706 (Copper alloy CuAI11Ni5Fe5 - bars for aerospace use) | 1 | chevron_right |
| NF L14-707 NF L14-707 (Copper alloy CuZn19Al6. Bars for aerospace use) | 1 | chevron_right |
| NF L14-708 NF L14-708 (Copper alloy CuZn23AI4 - bars for aerospace use) | 1 | chevron_right |
| NF L14-709 NF L14-709 (Copper alloy CuBe1.9 - bars for aerospace use) | 1 | chevron_right |
| NF L14-710 NF L14-710 (Copper alloy CuZn39Pb1.7 - bars for aerospace use) | 1 | chevron_right |
| NF L14-711 NF L14-711 (Copper alloy CuZn36Ni2 - bars for aerospace use) | 1 | chevron_right |
| NF L14-720 NF L14-720 (Copper alloy Cu-b1 - sheets and strips for aerospace use) | 1 | chevron_right |
| NF L14-721 NF L14-721 (Copper alloy CuBe1.9 - sheet and strip for aerospace use) | 1 | chevron_right |
| NF L17-260 NF L17-260 (Aerospace Series - Fluorocarbon Rubbers - Class 60 - Characteristics) | 2 | chevron_right |
| NF L17-261 NF L17-261 (Aerospace Series - Fluorosilicone Rubbers - Class 61 - Characteristics) | 3 | chevron_right |
| NF L21-203 NF L21-203 (Steel rivets. Stainless and refractory alloys rivets. Technical specification) | 6 | chevron_right |
| NF L22-030 NF L22-030 (Aircraft Fasteners - Steel Grades And Mechanical Properties (rech.)) | 11 | chevron_right |
| NF M 81-636 NF M 81-636 (Mining equipment. High tensile steel chains round link for chain conveyors and coal plough. Specifications. Acceptance testing) | 15 | chevron_right |
| NF prEN 10138-2 NF prEN 10138-2 (Prestressing steels - Part 2: wire) | 8 | chevron_right |
| NF prEN 10138-3 NF prEN 10138-3 (Prestressing steels - Part 3: strand) | 22 | chevron_right |
| NF prEN 10138-4 NF prEN 10138-4 (Prestressing steels - Part 4: bars) | 6 | chevron_right |
| NF prEN 10268 NF prEN 10268 (Cold rolled flat products higher yield strength for cold forming - Technical delivery conditions) | 19 | chevron_right |
| NF prEN 10338 NF prEN 10338 (Hot rolled and cold rolled non-coated flat products of multiphase steels for cold forming - Technical delivery conditions) | 4 | chevron_right |
| NF S 90-401 NF S 90-401 (Medical and surgical equipment. Implants for surgery. Metallic materials. Wrought stainless steel) | 2 | chevron_right |
| NF S 90-404 NF S 90-404 (Medico-surgical equipment. Implants for surgery. Metallic materials. Part 2 : unalloyed titanium) | 5 | chevron_right |
| NF S 90-450 NF S 90-450 (Surgical instruments. Haemostatic forceps. Stainless steel. Chemical composition and hardness) | 1 | chevron_right |
| NF S 90-451 NF S 90-451 (Medical and surgical equipment. Cutting instruments. Stainless steels. Chemical composition and hardness) | 3 | chevron_right |
| NF S 94-090 NF S 94-090 (Medico-surgical equipment - Materials for surgical instruments - Martensitic, precipitations hardening, austenitic and austeno-ferritic stainless steels) | 71 | chevron_right |
| NF S90-402 NF S90-402 (Medical and surgical equipment. Implants for surgery. Cobalt based casting alloy) | 1 | chevron_right |
| NF S90-403 NF S90-403 (Medical and surgical equipment. Implants for surgery. Forgeable and cold formed cobalt based alloy) | 1 | chevron_right |
| NF S90-405 NF S90-405 (Medico-surgical equipment; Implants for surgery; Metallic materials) | 1 | chevron_right |
| NF S90-406 NF S90-406 (Medico-surgical equipment. Implants for surgery. Metallic materials. Part 5 : wrought cobalt-chromium-tungsten-nickel alloy) | 1 | chevron_right |
| NF S90-407 NF S90-407 (Medico-surgical equipment. Implants for surgery. Metallic materials. Part 6 : wrought cobalt, nickel, chromium, molybdenum alloy) | 1 | chevron_right |
| NF S94-080-1 NF S94-080-1 (Surgical implants - Titanium alloy Ti6AI4V - Part 1: Bars and rods) | 1 | chevron_right |
| NF S94-080-2 NF S94-080-2 (Surgical implants. Titanium alloy Ti6AI4V. Part 2 : Sheets, strips and plates) | 1 | chevron_right |
| NF S94-080-3 NF S94-080-3 (Surgical implants. Titanium alloy Ti6AI4V. Part 3: Semi-finished products obtained by casting) | 1 | chevron_right |
| NF S94-080-4 NF S94-080-4 (Surgical implants. Titanium alloy TA6V - Part 4 : Semi-finished products obtained by forging or by machining) | 1 | chevron_right |
| Nickel chromium molybdenum steel | 3 | chevron_right |
| Nitriding steels | 2 | chevron_right |
| Non standardized steels | 72 | chevron_right |
| Oil hardening alloy steels | 12 | chevron_right |
| Silicon steel | 1 | chevron_right |
| Steel castings | 5 | chevron_right |