SAE Ti-5Al-1Fe Titanium Alloys

Material group: Nonferrous Alloys / Titanium Alloys
Country / Standard: United States / SAE

Data updates

Latest Update: 2023-12
Total number of updates: 2
Update History
2022-11

This material has 146 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE Ti-5Al-1Fe Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
4.50 – 5.50
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
C
VALUE
≤ 0.080
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Fe
VALUE
0.50 – 1.50
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
H
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
1333-74-0
CRITERIA
N
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7727-37-9; 17778-88-0
CRITERIA
O
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7782-44-7; 17778-80-2
CRITERIA
Other each
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Other total
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6

SAE AMS 4947: 2022 / Titanium Alloy, Cold Rolled Sheet and Strip, 5Al - 1Fe, Annealed

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE Ti-5Al-1Fe Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
80 — 130 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
4.3 — 5.1 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data

This material has 146 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE Ti-5Al-1Fe Heat Treatments

  • Annealing:
    When batch furnace is used, product shall be annealed by heating to a temperature between 600 to 750°C (1112 to 1382°F), holding at the selected temperature within ± 14°C (± 25°F) for a time commensurate with the thickness, and cooled;
    When continuous annealing is used, process parameters (e.g., furnace temperature set points, heat input, travel rate, etc.) for continuous heat treating lines shall be established by the material producer and validated by testing to the tensile properties requirements
  • Annealing:
    When batch furnace is used, product shall be annealed by heating to a temperature between 600 to 750°C (1112 to 1382°F), holding at the selected temperature within ± 14°C (± 25°F) for a time commensurate with the thickness, and cooled;
    When continuous annealing is used, process parameters (e.g., furnace temperature set points, heat input, travel rate, etc.) for continuous heat treating lines shall be established by the material producer and validated by testing to the tensile properties requirements

SAE Ti-5Al-1Fe Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 786 MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
≥ 8 %
Unlock full details
Full data available with free access View Complete Material Data
Grain Size
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
≥ 682 MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 1Cross References
  • 27Composition
  • 25Mechanical Properties
  • 2Physical Properties
  • 3Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • 1Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • 87Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • -Total Suppliers