PROPRIETARY 131050 Aluflex Aluminium Alloys

Material group: Nonferrous Alloys / Aluminium Alloys

Country / Standard: PROPRIETARY

Data updates

Latest Update: 2022-02

Total number of updates: 1

Update History

This material has 88 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

PROPRIETARY 131050 Aluflex Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

≤ 0.015

UNIT

CAS NUMBER

7440-42-8

CRITERIA

VALUE

≤ 0.007

UNIT

CAS NUMBER

7440-47-3

CRITERIA

VALUE

≤ 0.035

UNIT

CAS NUMBER

7440-50-8

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-89-6

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-95-4

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-96-5

CRITERIA

Other each

VALUE

val1

UNIT

CAS NUMBER

CRITERIA

Other total

VALUE

val1

UNIT

CAS NUMBER

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-21-3

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-32-6

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-62-2

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-66-6

Trimet Aluminium AG, Product Data Sheet,

Looking for full material performance data?

PROPRIETARY 131050 Aluflex Physical Properties

Temperature

0 - 30°C 30 - 100°C 100 - 300°C

PROPERTY / VALUE

Modulus of Elasticity

69 — 79 GPa

Unlock full details

Electrical Resistivity

0.0287 — 0.0297 Ω∙mm²/m

Unlock full details

Density

val1 kg/dm³

Unlock full details

Electrical Conductivity

val1 S/m

Unlock full details

Heat Capacity

val1 J/(kg∙°C)

Unlock full details

Thermal Conductivity

220 W/(m∙°C)

Unlock full details

Poisson Coefficient

val1

Unlock full details

This material has 88 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

PROPRIETARY 131050 Aluflex Heat Treatments

Redraw rods with diameter 9.5 mm:
As normally used, rods does not require annealing.
Inter-stage annealing during wire drawing (2 to 2.5 mm):
For certain applications, and depending on wire drawing practice and final wire diameter (very small diameters of less than 0.5 mm), it may be advantageous to include a complete recrystallization/softening treatment at some intermediate stage. Operating conditions in the static heat treatment oven: Temperature: 300°C; for 4 hours.
Annealing at final diameter:
For fine-gauge wire, the final annealing treatment can be carried out either in the static oven on reels of drawn wire, or continuously as the wire leaves drawing machines fitted with electric annealing systems suitable for aluminium.
Annealing in the static oven:
The final heat treatment conditions need to be matched to annealing oven, load to be treated, desired level of mechanical properties for the wire, manufacturing sequence adopted, with particular reference to whether or not inter-stage annealing is employed.

PROPRIETARY 131050 Aluflex Mechanical Properties

Temperature

0 - 30°C 100 - 300°C

PROPERTY / VALUE

Tensile Strength

120 — 160 MPa

Unlock full details

Elongation, A

10 — 25 %

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

Optimize material selection for your application - Book A Demo

Looking to compare materials and make better decisions?

Access reliable material data, compare options, and make better decisions faster.

With Total Materia, you can:

Compare materials based on real engineering data

Find equivalent materials across standards

Evaluate performance for your specific conditions

Check compliance with global regulations

See how this works for your specific application

Take a Guided Tour

-Cross References

12Composition
60Mechanical Properties
14Physical Properties
1Heat Treatment
-Metallography
-Machinability

-Stress-Strain
-Formability
-Fatigue
-Fracture
-Creep

-Joints
-Coatings
-Dimensions
-Tribology

-Corrosion
-Ageing
-Weatherability
-Irradiation

1Total Suppliers