Generic ZK21-0.2Sc Magnesium Alloys
Data updates
This material has 14 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
Generic ZK21-0.2Sc Chemical Composition
Microstructure, Mechanical Properties and in Vitro Degradation Behavior of a Novel Biodegradable Mg-1.5Zn-0.6Zr-0.2Sc Alloy, Tao Li, Hailong Zhang, Yong He, Ning Wen, Xitao Wang, Journal of Materials Science & Technology 31, p. 744-750;, 2015
Looking for full material performance data?
Free registration required • Instant access
Generic ZK21-0.2Sc Physical Properties
Temperature
This material has 14 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
Generic ZK21-0.2Sc Heat Treatments
- The alloy was prepared by gravity casting under the protection of CO2 and SF6 mixture. Pure magnesium (≥99.99%) was melted first, with pure Zn (≥99.995%) added at 720°C and Zr added at 750°C as Mg-30%Zr (impurities ≤ 0.15%), and finally with Sc added at 780°C as Mg-2%Sc (impurities ≤ 0.1%). The melt was held at 780°C for 30 min to ensure the complete dissolution of Zr and Sc. After 1 min stirring and 3 min standing, the alloy was cast in a permanent mould at pouring temperature 740°C and mould temperature 200°C.
Generic ZK21-0.2Sc Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- -Cross References
- 7Composition
- 3Mechanical Properties
- 2Physical Properties
- 1Heat Treatment
- 1Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers