Generic Ti-48Al Titanium Alloys
Data updates
This material has 64 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
Generic Ti-48Al Chemical Composition
Gamma Titanium Aluminide Alloys, Science and Technology, Fritz Appel, Jonathan David Heaton Paul, and Michael Oehring, Wiley-VCH, 2011
Looking for full material performance data?
Free registration required • Instant access
Generic Ti-48Al Physical Properties
Temperature
This material has 64 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
Generic Ti-48Al Heat Treatments
- Heat treatment and processing conditions for extrusions:
Heat treatment 1: Heated at 1275°C, 0.5 h + heated at 900°C, 6 h
Heat treatment 2: Heated at 1300°C, 0.5 h + heated at 900°C, 6 h
Type 1 processing condition (for heat treatment 1 and 2): Sealed in vacuum, heated to 1360°C for 2 h (20°C below the α-transus (1380°C)) and then extruded.
Heat treatment 3: Heated at 1375°C, 1 h + heated at 900°C, 6 h
Type 2 processing condition (for heat treatment 3): Heated at 1400°C for 4 h in vacuum, furnace cooled to produce a fully lamellar structure, sealed in vacuum and extruded.
Heat treatment 4: Heated at 1350°C, 0.5 h + heated at 900°C, 6 h
Heat treatment 5: Heated at 1375°C, 0.5 h + heated at 900°C, 6 h
Heat treatment 6: Heated at 900°C, 24 h
Type 3 processing condition (for heat treatment 4, 5 and 6): Heated at 1380°C for 2 h, and then extruded.
Generic Ti-48Al Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
Generic Ti-48Al International Equivalent Materials
Showing 4 of 9 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 9 international equivalents?
See all 9 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 9Cross References
- 2Composition
- 48Mechanical Properties
- 2Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- 2Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers