AL-C42201 (Italy / UNI) Material Properties

Material group: Nonferrous Alloys / Aluminium
Country/Standard: Italy / UNI

Data updates

Latest Update: 2019-03
Total number of updates: 1
Update History:

Mechanical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Yield Strength, Rp0.2 val1
Full data access requires a free trial. Sign Up Free
MPa view details
Tensile Strength 280 MPa view details
Elongation, A 2 % view details
Brinell Hardness (HB) 85 view details
Yield Strength, Rp0.2 val1
Full data access requires a free trial. Sign Up Free
ksi view details
Tensile Strength 40.6 ksi view details
Elongation, A 2 % view details
Brinell Hardness (HB) 85 view details

Physical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Modulus of Elasticity 69 — 79 GPa view details
Density 2.6 — 2.9 kg/dm³ view details
Poisson Coefficient 0.33 view details
Modulus of Elasticity 10 E+03 — 11.5 E+03 ksi view details
Density 0.094 — 0.105 lb/in³ view details
Poisson Coefficient 0.33 view details

Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Base
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Cu
VALUE
≤ 0.05
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
≤ 0.15
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mg
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Other each
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
CRITERIA
Other total
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Zn
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-66-6

EN 2726: 2018 / Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a ≤ 20 mm

Heat Treatments

  • 525°C ≤ θ ≤ 550°C / 6h ≤ t ≤ 24h / WQ θ ≤ 70°C <br> Unless otherwise advised by the purchaser, the manufacturer may, at his discretion, alternatively use a polymer quench at θ ≤ 30°C