SAE A13570 Aluminium Alloys

Material group: Nonferrous Alloys / Aluminium Alloys
Country / Standard: United States / SAE

Data updates

Latest Update: 2024-03
Total number of updates: 5
Update History
2023-05 2020-07 2018-10 2018-05

This material has 76 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE A13570 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Be
VALUE
0.04 – 0.07
UNIT
%
CAS NUMBER
7440-41-7
CRITERIA
Cu
VALUE
≤ 0.20
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mg
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Other each
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Other total
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Zn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6

SAE J452: 2018 / Chemical compositions, mechanical and physical properties of SAE aluminum casting alloys

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE A13570 Physical Properties

Temperature

PROPERTY / VALUE
Compression Modulus
72 GPa
Unlock full details
Full data available with free access View Complete Material Data
Modulus of Elasticity
69 — 79 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
val1
Full data available with free access View Complete Material Data
W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
0.0442 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Melting Temperature
val1
Full data available with free access View Complete Material Data
°C
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Shear Modulus
val1
Full data available with free access View Complete Material Data
GPa
Unlock full details
Full data available with free access View Complete Material Data

This material has 76 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE A13570 Heat Treatments

  • Temper T61
    Sand Castings
    Solution Heat Treated(1) at 538 ± 6°C (1000 ± 10°F), 12 hours;
    Precipitation Heat Treated at 154 ± 6°C (310 ± 10°F), 8-10 hours.
    Permanent Mold Castings
    Solution Heat Treated(1) at 538 ± 6°C (1000 ± 10°F), 10 hours;
    Precipitation Heat Treated at 154 ± 6°C (310 ± 10°F), 8 hours.
    Stress relieve for dimensional stability as follows: (1) Hold at 413 ± 14°C (775 ± 25°F) for 5 h. Then (2) furnace cool to 343°C (650°F) for 2 or more h. Then (3) furnace cool to 232°C (450°F) for not more than 1/2 h. Then (4) furnace cool to 121°C (250°F) for approximately 2 h. Then (5) cool to room temperature in still air outside the furnace.

    (1) Quench in water at 65 to 100°C (150 to 212°F) except as noted.

SAE A13570 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 310 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
85 — 115
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
≥ 3 %
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

SAE A13570 International Equivalent Materials

Showing 15 of 26 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
A13570
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A357.0
STANDARD
AA
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
B 108 A357.0
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A357
STANDARD
AA
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
SB-108 A357.0
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A-S7G06
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Implicit
MATERIAL
AA603
STANDARD
AS
COUNTRY / PRODUCER
Australia
EQUIVALENCE CATEGORY
Implicit
MATERIAL
B 686 A357.0 Class 10
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
B 686 A357.0 Class 11
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
B 686 A357.0 Class 1
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
B 686 A357.0 Class 2
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
LM 25
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A357.0
STANDARD
MIL
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A357.0
STANDARD
NBR
COUNTRY / PRODUCER
Brazil
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
4011
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 26 international equivalents?

See all 26 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 26Cross References
  • 11Composition
  • 4Mechanical Properties
  • 18Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • 1Stress-Strain
  • -Formability
  • 5Fatigue
  • 1Fracture
  • -Creep
  • 2Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • 1Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 6Total Suppliers