GB TA1G Titanium Alloys
Data updates
This material has 497 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
GB TA1G Chemical Composition
GB/T 3620.1: 2016 / Designation and composition of titanium and titanium alloys
Looking for full material performance data?
Free registration required • Instant access
GB TA1G Physical Properties
Temperature
This material has 497 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
GB TA1G Heat Treatments
- Heating to 600°C - 700°C, holding for 1h - 3h, air cooling.
- The heat treatment temperature shall not be lower than 550°C, with a holding time of at least 0.5 hours.
When the forming temperature is below 300°C and the deformation exceeds 6%, heat treatment shall be carried out after forming.
When the forming temperature is above 550°C and followed by air cooling, heat treatment after forming may be omitted.
GB TA1G Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
GB TA1G International Equivalent Materials
Showing 15 of 26 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 26 international equivalents?
See all 26 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 26Cross References
- 14Composition
- 50Mechanical Properties
- 2Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- 4Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- 389Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 10Total Suppliers