PROPRIETARY Micro-Melt BioDur Carpenter CCM Alloy Cobalt Alloys
Data updates
This material has 119 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Micro-Melt BioDur Carpenter CCM Alloy Chemical Composition
Carpenter Technology Corporation, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Micro-Melt BioDur Carpenter CCM Alloy Physical Properties
Temperature
This material has 119 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Micro-Melt BioDur Carpenter CCM Alloy Heat Treatments
- Annealed at 1093°C - 1149°C (2000°F - 2100°F) for 30 minutes followed by air cooling. The resultant annealed microstructure has a 7 to 8 ASTM E 112 grain size number and a hardness of 36 to 40 HRC. Finer grain sizes and higher annealed hardnesses can be attained by using lower annealing temperatures. Micro-Melt BioDur Carpenter CCM alloy maintains a finer grain size and a higher hardness than BioDur Carpenter CCM alloy for the same annealing parameters as shown in the following tables.
PROPRIETARY Micro-Melt BioDur Carpenter CCM Alloy Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Micro-Melt BioDur Carpenter CCM Alloy International Equivalent Materials
Showing 15 of 35 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 35 international equivalents?
See all 35 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 35Cross References
- 9Composition
- 23Mechanical Properties
- 30Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 20Total Suppliers