PROPRIETARY Pyromet Alloy CTX-3 Nickel Alloys
Data updates
This material has 40 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Pyromet Alloy CTX-3 Chemical Composition
Carpenter Technology Corporation, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Pyromet Alloy CTX-3 Physical Properties
Temperature
This material has 40 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Pyromet Alloy CTX-3 Heat Treatments
- Heat Treatment for Optimum Mechanical Properties, Warm worked material is solution treated at 1800°F (982°C) for 1 hour and air cooled. Age at 1425°F (774°C) for 12 hours, furnace cool at 100°F (56°C) per hour to 1150°F (621 °C) for 8 hours, then air cool. Heat Treatment for Optimum Properties if Brazing Cycles Over 1800°F (982°C) are to be Employed; Warm worked material is solution treated prior to brazing at 1900°F (1038°C) for 1 hour and air cooled. Age at 1475°F (802°C) for 16 hours, furnace cool at 100°F (56°C) per hour to 1150°F (621 °C) for 8 hours. Air cool after the brazing cycle.
PROPRIETARY Pyromet Alloy CTX-3 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Pyromet Alloy CTX-3 International Equivalent Materials
Showing 1 of 1 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 1 international equivalents?
See all 1 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 1Cross References
- 14Composition
- 12Mechanical Properties
- 8Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers