VdTÜV NiCr22Mo9Nb Nickel Alloys
Data updates
This material has 320 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
VdTÜV NiCr22Mo9Nb Chemical Composition
WB 499: 2024 / Highly corrosion-resistant nickel based alloy NiCr22Mo9Nb; Material No. 2.4856, Strip, sheet, section, seamless tube, bar and forging
Looking for full material performance data?
Free registration required • Instant access
VdTÜV NiCr22Mo9Nb Physical Properties
Temperature
This material has 320 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
VdTÜV NiCr22Mo9Nb Heat Treatments
- Annealed at 871°C to 1100°C, cooled in water. For sufficient annealing, the following holding time applies:
Strips: t ≤ 7 mm, holding time is 1 to 15 minutes, cooling in air or water
Sheets: t ≤ 80 mm, holding time is 5 to 90 minutes, cooling in air or water
Forgings, rods, sections: t ≤ 250 mm, holding time is 45 to 240 minutes, cooling in air or water
Tubes: t ≤ 6.5 mm, holding time is 5 to 30 minutes, cooling in water
VdTÜV NiCr22Mo9Nb Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
VdTÜV NiCr22Mo9Nb International Equivalent Materials
Showing 15 of 121 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 121 international equivalents?
See all 121 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 121Cross References
- 13Composition
- 44Mechanical Properties
- 12Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 32Joints
- -Coatings
- 4Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 93Total Suppliers