PROPRIETARY RA333 alloy Nickel Alloys

Material group: Nonferrous Alloys / Nickel Alloys

Country / Standard: PROPRIETARY

Data updates

Latest Update: 2021-05

Total number of updates: 1

Update History

This material has 323 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

PROPRIETARY RA333 alloy Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

≤ 0.08

UNIT

CAS NUMBER

7440-44-0

CRITERIA

VALUE

2.5 – 4.0

UNIT

CAS NUMBER

7440-48-4

CRITERIA

VALUE

24.0 – 27.0

UNIT

CAS NUMBER

7440-47-3

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-89-6

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-96-5

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-98-7

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-02-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7723-14-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7704-34-9

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-21-3

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-33-7

Rolled Alloys, Product Data Sheets,

Looking for full material performance data?

PROPRIETARY RA333 alloy Physical Properties

Temperature

0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

PROPERTY / VALUE

Modulus of Elasticity

185 — 205 GPa

Unlock full details

Electrical Resistivity

1.14 Ω∙mm²/m

Unlock full details

Thermal Conductivity

val1 W/(m∙°C)

Unlock full details

Density

val1 kg/dm³

Unlock full details

Electrical Conductivity

val1 S/m

Unlock full details

Melting Temperature

val1 °C

Unlock full details

Dynamic Modulus of Elasticity

val1 GPa

Unlock full details

Poisson Coefficient

val1

Unlock full details

This material has 323 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

PROPRIETARY RA333 alloy Heat Treatments

If a full anneal is desired, heat 1093-1177°C (2000-2150°F) (aim 1093-1121°C (2000-2050°F) for sheet gauges), rapid air cool or water quench.
Residual stresses and some of the work hardening from severe forming operations may be relieved by heating 1010-1038°C (1850-1900°F), one hour per 25.4 mm (in.) of thickness, air cool.
Fully austenitic material and cannot be hardened or strengthened by heat treatment.

PROPRIETARY RA333 alloy Mechanical Properties

Temperature

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

PROPERTY / VALUE

Tensile Strength

551 — 827 MPa

Unlock full details

Elongation, A

val1 %

Unlock full details

Yield Strength, Rp0.2

val1 MPa

Unlock full details

Impact Energy

val1 J

Unlock full details

Reduction of Area

val1 %

Unlock full details

Rockwell Hardness (HR)

val1

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

PROPRIETARY RA333 alloy International Equivalent Materials

Showing 3 of 58 results.

MATERIAL

STANDARD

COUNTRY / PRODUCER

EQUIVALENCE CATEGORY

MATERIAL

Nicrofer 4626 MoW - alloy 333

STANDARD

PROPRIETARY

COUNTRY / PRODUCER

EQUIVALENCE CATEGORY

Implicit

MATERIAL

RA333 bare wire

STANDARD

PROPRIETARY

COUNTRY / PRODUCER

EQUIVALENCE CATEGORY

Implicit

MATERIAL

RA 333

STANDARD

SAE

COUNTRY / PRODUCER

United States

EQUIVALENCE CATEGORY

Implicit

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 58 international equivalents?

See all 58 equivalent grades with detailed mapping by standard, producer and equivalence category.

Optimize material selection for your application - Book A Demo

Looking to compare materials and make better decisions?

Access reliable material data, compare options, and make better decisions faster.

With Total Materia, you can:

Compare materials based on real engineering data

Find equivalent materials across standards

Evaluate performance for your specific conditions

Check compliance with global regulations

See how this works for your specific application

Take a Guided Tour

58Cross References

11Composition
127Mechanical Properties
71Physical Properties
1Heat Treatment
-Metallography
1Machinability

-Stress-Strain
-Formability
-Fatigue
-Fracture
2Creep

-Joints
-Coatings
-Dimensions
-Tribology

-Corrosion
4Ageing
-Weatherability
-Irradiation

48Total Suppliers