DIN 2.4856 Nickel Alloys

Material group: Nonferrous Alloys / Nickel Alloys
Country / Standard: Germany / DIN

Data updates

Latest Update: 2024-10
Total number of updates: 6
Update History
2022-04 2021-06 2018-10 2016-11 2016-03

This material has 599 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

DIN 2.4856 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
≤ 0.40
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
C
VALUE
0.03 – 0.10
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Co
VALUE
≤ 1.00
UNIT
%
CAS NUMBER
7440-48-4
CRITERIA
Cr
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
Nb+Ta
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Ni
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
P
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6

EN 10088-1: 2023 / Stainless steels - Part 1: List of stainless steels

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

DIN 2.4856 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
185 — 205 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
1.29 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
9.8 — 10 W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Dynamic Modulus of Elasticity
val1
Full data available with free access View Complete Material Data
GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Heat Capacity
val1
Full data available with free access View Complete Material Data
J/(kg∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 599 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

DIN 2.4856 Heat Treatments

  • Annealed at 871°C to 1100°C, cooled in water. For sufficient annealing, the following holding time applies:
    Strips: t ≤ 7 mm, holding time is 1 to 15 minutes, cooling in air or water
    Sheets: t ≤ 80 mm, holding time is 5 to 90 minutes, cooling in air or water
    Forgings, rods, sections: t ≤ 250 mm, holding time is 45 to 240 minutes, cooling in air or water
    Tubes: t ≤ 6.5 mm, holding time is 5 to 30 minutes, cooling in water
  • Annealing: 950-1000°C, air or water cooling. Cooling to be sufficiently rapid. If heat treatment is carried out in a continuous furnace, the upper part of the range specified is usually preferred or even exceeded.

DIN 2.4856 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
690 — 1050 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data
Impact Energy
val1
Full data available with free access View Complete Material Data
J
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp1
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

DIN 2.4856 International Equivalent Materials

Showing 15 of 168 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
NS3306
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Official
MATERIAL
H06625
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Official
MATERIAL
NiCr22Mo9Nb
STANDARD
GOST
COUNTRY / PRODUCER
Russia
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
ENiCrMo-3
STANDARD
AWS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
ERNiCrMo-3
STANDARD
AWS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SB-443 N06625 Grade 1
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SB-444 N06625 Grade 1
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SB-446 N06625 Grade 1
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SB-564 N06625
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SB-705 N06625 Grade 1
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
NA 43
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Implicit
MATERIAL
NA 21
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Implicit
MATERIAL
2.4856
STANDARD
GOST
COUNTRY / PRODUCER
Russia
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
NiCr22Mo9Nb
STANDARD
ISO
COUNTRY / PRODUCER
International
EQUIVALENCE CATEGORY
Implicit
MATERIAL
5879
STANDARD
SAE
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 168 international equivalents?

See all 168 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 168Cross References
  • 63Composition
  • 123Mechanical Properties
  • 23Physical Properties
  • 2Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • 32Joints
  • -Coatings
  • 59Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 129Total Suppliers