PROPRIETARY Arcap AP1D Copper Alloys
Data updates
This material has 487 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Arcap AP1D Chemical Composition
Vista Metals Inc., Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Arcap AP1D Physical Properties
Temperature
This material has 487 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Arcap AP1D Heat Treatments
- Soft annealing: 750 - 800 ° C, in air/15 - 60 min; annealing: 300 ºC, in air 1 h
- Annealing heat treatment: In a neutral or reducing atmosphere - annealing temperature around 750°C, time at temperature 15 minutes to 1 hour depending on the volumes processed.
Stress-relieving heat treatment: Of rolled, drawn, punched parts, etc. - treatment temperature 250°C, preferably in a neutral or reducing atmosphere.
Pickling: After annealing by naked flame, remove the carbon deposits in a 10% sulphuric acid bath with 2% to 3% nitric acid, then pickle in a bath containing 80% water, 9% 66° Be sulphuric acid and 11% sodium dichromate, cold or preferably hot (50 to 60°C).
AP1D grades: As these grades are sensitive to temperature rises, welding is not recommended; soldering can be used though.
PROPRIETARY Arcap AP1D Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Arcap AP1D International Equivalent Materials
Showing 1 of 4 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 4 international equivalents?
See all 4 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 4Cross References
- 15Composition
- 20Mechanical Properties
- 19Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- 424Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 3Total Suppliers