AFCEN NC 15 Fe Nickel Alloys
Data updates
This material has 147 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AFCEN NC 15 Fe Chemical Composition
M 4102: RCC-M II: 2024 / Forged or rolled class 1, 2 and 3 nickel-chromium-iron alloy parts
Looking for full material performance data?
Free registration required • Instant access
AFCEN NC 15 Fe Physical Properties
Temperature
This material has 147 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AFCEN NC 15 Fe Heat Treatments
- Final heat treatment for mechanical properties shall consist of heating at between 705°C and 1150°C, followed by rapid cooling.
- Final treatment for mechanical properties shall include heating at a temperature of between 950°C and 1150°C, followed by rapid cooling. If the final forging or rolling temperature falls within the temperature limits specified for heat treatment and provided that mechanical strength requirements are met, heat treatment in a furnace shall not be required. In this case, the final forging or rolling temperature and the cooling conditions shall be recorded. Parts shall be subjected to heat treatment at 715°C ± 15°C for a period of at least 12 hours.
AFCEN NC 15 Fe Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
AFCEN NC 15 Fe International Equivalent Materials
Showing 3 of 3 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 3 international equivalents?
See all 3 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 3Cross References
- 21Composition
- 56Mechanical Properties
- 41Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- 1Fatigue
- -Fracture
- 20Creep
- 1Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers