UNI P AC3.5FGN Aluminium Alloys
Data updates
This material has 53 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
UNI P AC3.5FGN Chemical Composition
UNI SPERIMENTALE 3578: 1955 / Primary wrought aluminium-copper-iron- magnesium-nickel alloy (Cu 3.5%, Fe 1.5%, Si 0.6%, Mg 0.65%, Ni 0.6%)
Looking for full material performance data?
Free registration required • Instant access
UNI P AC3.5FGN Physical Properties
Temperature
This material has 53 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
UNI P AC3.5FGN Heat Treatments
- R: Full annealing at 360 - 400°C for 4 - 8 hours and slow cooling in oven until 250°C; TA: Water quenching (preferably using hot water, 60 - 100°C, for complex parts) from 525 -535°C after preheating for 2 - 8 hours ; artificial ageing at 155 - 165°C for 20 hours. Hot working range: 350 - 480°C.
UNI P AC3.5FGN Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
UNI P AC3.5FGN International Equivalent Materials
Showing 1 of 1 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 1 international equivalents?
See all 1 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 1Cross References
- 10Composition
- 22Mechanical Properties
- 12Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 7Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers