B.S. L 167 Aluminium Alloys
Data updates
This material has 191 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. L 167 Chemical Composition
BS L 167: 1978 / Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
Looking for full material performance data?
Free registration required • Instant access
B.S. L 167 Physical Properties
Temperature
This material has 191 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. L 167 Heat Treatments
- The solution treatment shall consist of heating at a temperature of 505 +/- 5°C for not more than 45 min. in salt or 60 min. in air, followed by quenching in water at a temperature not exceeding 40°C. Artificial ageing consist of heating at a temperature of 175+/-5°C for 7h to 12h. Artificial ageing by the purchaser or by the manufacturer to demonstrate convertibility shall consist heating at a temperature of 175 +/- 5°C for 9h to 12h. The duration of ageing at room temperature shall be not less than 5 days nor more than 10 days.
B.S. L 167 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
B.S. L 167 International Equivalent Materials
Showing 15 of 123 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 123 international equivalents?
See all 123 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 123Cross References
- 13Composition
- 9Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 42Total Suppliers