B.S. L 164 Aluminium Alloys
Data updates
This material has 143 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. L 164 Chemical Composition
BS L 164: 1978 / Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
Looking for full material performance data?
Free registration required • Instant access
B.S. L 164 Physical Properties
Temperature
This material has 143 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. L 164 Heat Treatments
- Solution treatment: The solution treatment shall consist of heating at a temperature of 505 +/- 5°C for not more than 45 min. in salt or 60 min in air, followed by quenching in water at a temperature not exceeding 45 °C; Ageing at room temperature: The duration of ageing at room temperature shall be not less than 5 days nor more than 10 days: Artificial ageing: Artificial ageing by the purchaser or by the manufacturer to demonstrate convertibility shall consist of heating at a temperature of 175 +/- 5°C for 9h to 12h.
B.S. L 164 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 120Cross References
- 13Composition
- 6Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers