SAE 319.0 Aluminium Alloys

Material group: Nonferrous Alloys / Aluminium Alloys
Country / Standard: United States / SAE

Data updates

Latest Update: 2023-05
Total number of updates: 4
Update History
2020-03 2018-05 2015-01

This material has 177 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 319.0 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Cu
VALUE
3.0 – 4.0
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
≤ 1.0
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mg
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Ni
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
Other total
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Zn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6

SAE J452: 2018 / Chemical compositions, mechanical and physical properties of SAE aluminum casting alloys

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 319.0 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
69 — 79 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
0.0639 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Melting Temperature
val1
Full data available with free access View Complete Material Data
°C
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
109 W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 177 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 319.0 Heat Treatments

  • Temper T5
    Sand Castings
    Precipitation Heat Treated at 204 ± 6°C (400 ± 10°F), 8 hours;
    Temper T6
    Sand Castings
    Solution Heat Treated (1) at 504 ± 6°C (940 ± 10°F), 6-12 hours;
    Precipitation Heat Treated at 154 ± 6°C (310 ± 10°F), 2-5 hours;
    Permanent Mold Castings
    Solution Heat Treated (1) at 504 ± 6°C (940 ± 10°F), 4-12 hours;
    Precipitation Heat Treated at 154 ± 6°C (310 ± 10°F), 2-5 hours;
    Temper T61
    Permanent Mold Castings
    Solution Heat Treated (1) at 504 ± 6°C (940 ± 10°F), 4-12 hours;
    Precipitation Heat Treated at 154 ± 6°C (310 ± 10°F), 8-12 hours.

    (1) Quench in water at 65 to 100°C (150 to 212°F) except as noted.
  • Solution heat treatment shall be at the temperature: 502°C (935°F), minimum soak time is 6 hours and Quenched;
    Temper after Solution treatment shall be T4 and delay at room temperature.
    Annealing at 441°C (825°F), minimum soak time is 1 hour; Air cooling;
    Aging (precipitation heat treatment):
    Condition before Aging W or T4;
    Aging at 154°C (310°F), soak time is 2-6 hours;
    Temper T6 after Aging.

SAE 319.0 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 160 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
55 — 110
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
≥ 1 %
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

SAE 319.0 International Equivalent Materials

Showing 15 of 76 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
A03190
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
319.0
STANDARD
AA
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
B 26 319.0
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
SB-26 319.0
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
SB-108 319.0
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
B 618 319.0
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
B 108 319.0
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
319
STANDARD
AA
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A-S5UZ
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Implicit
MATERIAL
B 275 319.0
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
B 275 SC64D
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AC-45000
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Implicit
MATERIAL
EN AC-Al Si6Cu4
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Implicit
MATERIAL
AK5M
STANDARD
GOST
COUNTRY / PRODUCER
Russia
EQUIVALENCE CATEGORY
Implicit
MATERIAL
319.0
STANDARD
NMX
COUNTRY / PRODUCER
Mexico
EQUIVALENCE CATEGORY
Composition 100%

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 76 international equivalents?

See all 76 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 76Cross References
  • 10Composition
  • 20Mechanical Properties
  • 22Physical Properties
  • 2Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • 1Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 46Total Suppliers