SAE 50Ni - 50Fe Nickel Alloys
Data updates
This material has 75 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 50Ni - 50Fe Chemical Composition
SAE AMS 7719F: 2015 / Nickel-Iron Alloy, Magnetic, Sheet and Strip 50Ni - 50Fe Stamping Quality, Half-Hard Temper
Looking for full material performance data?
Free registration required • Instant access
SAE 50Ni - 50Fe Physical Properties
Temperature
This material has 75 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 50Ni - 50Fe Heat Treatments
- Annealed by heating to 1177 ± 14°C (2150 ± 25 °F) in a dry hydrogen atmosphere having a dew point of -51°C (-60°F) or lower, holding at heat for 4 ± 0.25 hours, and cooling in a non-contaminating atmosphere at a rate not greater than 56°C (100°F) per hour to 593°C (1100°F) or lower, unless another cooling rate is recommended by the alloy producer.
- Annealed by heating to 1177 ± 14°C (2150 ± 25°F) in a dry hydrogen atmosphere having a dew point of -51°C (-60°F) or lower, holding at heat for 4 ± 0.25 hours, and cooling in a non-contaminating atmosphere at a rate not greater than 56°C (100°F) per hour to 427°C (800°F) or lower, unless another cooling rate is recommended by the alloy producer.
SAE 50Ni - 50Fe Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 50Ni - 50Fe International Equivalent Materials
Showing 2 of 5 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 5 international equivalents?
See all 5 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 5Cross References
- 6Composition
- 6Mechanical Properties
- 9Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 45Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers