SAE 7056 Aluminium Alloys
Data updates
This material has 77 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 7056 Chemical Composition
SAE AMS 4407B: 2024 / Aluminum Alloy, Plate (7056-T7651) 9.1Zn - 1.6Cu - 1.9Mg Solution Heat Treated, Stress Relieved, and Overaged
Looking for full material performance data?
Free registration required • Instant access
SAE 7056 Physical Properties
Temperature
This material has 77 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 7056 Heat Treatments
- Solution heat treatment: heat to 460 to 477°C (860 to 890°F), hold at heat for a time commensurate with product thickness, rapidly cool in a suitable quenching medium.
Overaging shall be performed at a specific temperature and time as required. - Annealing: Soak for 2 to 3 hours at 404°C (760°F ); cool to 204°C (400°F) or lower, reheat to 232°C (450°F), and soak for 4 hours; cooling rate optional.
Solution heat treating temperature (for plate): 460-477°C (860- 890°F) , followed by an air cool and quenched.
SAE 7056 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 7056 International Equivalent Materials
Showing 3 of 3 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 3 international equivalents?
See all 3 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 3Cross References
- 11Composition
- 44Mechanical Properties
- 9Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 8Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers