SAE EQ21 Magnesium Alloys
Data updates
This material has 38 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE EQ21 Chemical Composition
SAE AMS 4417C: 2018 / Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21 - T6) Solution and Precipitation Heat Treated
Looking for full material performance data?
Free registration required • Instant access
SAE EQ21 Physical Properties
Temperature
This material has 38 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE EQ21 Heat Treatments
- Castings, integrally-cast coupons, and separately-cast tensile specimens shall be heated to a temperature not exceeding 524 °C (975 °F) and held at heat for the proper time for solution heat treatment and quenched as required, reheated to a temperature between 193 to 204 °C (380 to 400 °F) and held at heat for the proper time for precipitation heat treatment; at least one set of tensile specimens shall, during each stage of heat treatment, be put into a batch-type furnace with each load of castings or into a continuous furnace at intervals of not longer than 3 hours.
SAE EQ21 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE EQ21 International Equivalent Materials
Showing 8 of 8 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 8 international equivalents?
See all 8 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 8Cross References
- 7Composition
- 16Mechanical Properties
- 5Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers