PROPRIETARY Vicalloy 1 Cobalt Alloys

Material group: Nonferrous Alloys / Cobalt Alloys
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2019-04
Total number of updates: 2
Update History
2016-02

This material has 16 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Vicalloy 1 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
0.03
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Co
VALUE
52.00
UNIT
%
CAS NUMBER
7440-48-4
CRITERIA
Fe
VALUE
Balance
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
V
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-62-2

Carpenter Technology Corporation, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Vicalloy 1 Physical Properties

Temperature

PROPERTY / VALUE
Electrical Resistivity
0.63 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
8.166 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
1.59e+006 S/m
Unlock full details
Full data available with free access View Complete Material Data

This material has 16 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Vicalloy 1 Heat Treatments

  • Heating to approximately 1180°C and cooling quickly or slowly, whichever is convenient, produces a hardness of about Rc 20. Heavy sections of bar should be quenched in oil to obtain rapid cooling to room temperature. After fabrication in this state, the magnetic properties are obtained by a final aging treatment at about 600°C for 2 to 6 hours. This increases the hardness to Rc 60 or higher. Aging should be done in a nonoxidizing atmosphere such as hydrogen.

Optimize material selection for your application - Book A Demo

  • -Cross References
  • 6Composition
  • -Mechanical Properties
  • 6Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 3Total Suppliers