DIN 3.7025 Titanium Alloys
Data updates
This material has 350 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 3.7025 Chemical Composition
DIN 17850: 2023 / Titanium - Chemical composition
Looking for full material performance data?
Free registration required • Instant access
DIN 3.7025 Physical Properties
Temperature
This material has 350 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 3.7025 Heat Treatments
- Heat treatment is usually carried out in an oxidic atmosphere in electrical or gas-heated ovens, either using an inert gas or vacuum.
Annealing shall be carried out at temperatures between 650°C and 750°C.
The holding time is 3 min per mm of product thickness but at least 15 min while cooling down in air.
For high degrees of forming or large dimensions, a different holding time can be practical for annealing.
Stress relief heat treatment shall be carried out at 450°C to 600°C. The holding time is at least 30 min while cooling down in air. - Annealed: At temperatures between 600 and 700°C.
DIN 3.7025 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 3.7025 International Equivalent Materials
Showing 15 of 70 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 70 international equivalents?
See all 70 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 70Cross References
- 8Composition
- 86Mechanical Properties
- 25Physical Properties
- 4Heat Treatment
- -Metallography
- -Machinability
- 39Stress-Strain
- 34Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 17Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 67Total Suppliers