SAE 4511 Copper Alloys
Data updates
This material has 100 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 4511 Chemical Composition
SAE AMS 4511B: 2025 / Copper-Beryllium Alloy Castings 97Cu - 2.1Be - 0.52(Co + Ni) - 0.28Si Solution and Precipitation Heat Treated (TF00)
Looking for full material performance data?
Free registration required • Instant access
SAE 4511 Physical Properties
Temperature
This material has 100 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 4511 Heat Treatments
- Solution Heat Treating: All castings and tensile specimens shall be heated to 760 to 802°C (1400 to 1475°F), held at temperature for 15 to 60 minutes per 25 mm of thickness but in no case for less than 15 minutes, and quenched in cold water. Precipitation Heat Treating: All castings and tensile specimens shall be heated to 330 to 357°C (625 to 675°F), held at heat for three hours ± 0.25 h, and air cooled.
SAE 4511 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 4511 International Equivalent Materials
Showing 15 of 53 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 53 international equivalents?
See all 53 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 53Cross References
- 11Composition
- 5Mechanical Properties
- 2Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 28Total Suppliers