UNI P-AlSi0.5Mg Aluminium Alloys
Data updates
This material has 44 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
UNI P-AlSi0.5Mg Chemical Composition
UNI 3570: 1955 / Primary aluminium-silicon-magnesium alloy for electrical conductors (Si 0.5%, Mg 0.5%)
Looking for full material performance data?
Free registration required • Instant access
UNI P-AlSi0.5Mg Physical Properties
Temperature
This material has 44 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
UNI P-AlSi0.5Mg Heat Treatments
- R : Full annealing for 2 to 4 hours at the temperature range of 360 - 400 °C and slow cooling in the oven until 250 °C THA 16 : Water quenching (10-30°C) from 500-520 °C after preheating for 1 to 2 hours, Cold drawing (hardening >= H50). Artificially ageing at 155-165°C for 6 to 12 hours. Hot working at 400 - 480 °C
UNI P-AlSi0.5Mg Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
UNI P-AlSi0.5Mg International Equivalent Materials
Showing 5 of 6 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 6 international equivalents?
See all 6 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 6Cross References
- 11Composition
- 9Mechanical Properties
- 12Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 3Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers