ASTM B 862 Grade 11 Titanium Alloys
Data updates
This material has 4766 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASTM B 862 Grade 11 Chemical Composition
B862: 2023 / Standard Specification for Titanium and Titanium Alloy Welded Pipe
Looking for full material performance data?
Free registration required • Instant access
ASTM B 862 Grade 11 Physical Properties
Temperature
This material has 4766 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASTM B 862 Grade 11 Heat Treatments
- Welded pipe shall be made from annealed flat-rolled products by a welding process. Further, may be reduced by cold working or hot working. Cold reduced pipe shall be annealed after cold working at a temperature of not less than 538°C (1000°F). Hot worked pipe finished above 760°C (1400°F) need not be further heat treated.
Stress relief heat treatment shall consist of holding the pipe at a minimum temperature of 593°C (1100°F) for not less than 0.5 h/25.4 mm of wall thickness.
ASTM B 862 Grade 11 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASTM B 862 Grade 11 International Equivalent Materials
Showing 15 of 35 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 35 international equivalents?
See all 35 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 35Cross References
- 9Composition
- 3Mechanical Properties
- 21Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 7Creep
- -Joints
- -Coatings
- 3Dimensions
- -Tribology
- 4672Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 14Total Suppliers